|author||Eric Andersen <firstname.lastname@example.org>||2004-10-09 06:27:44 +0000|
|committer||Eric Andersen <email@example.com>||2004-10-09 06:27:44 +0000|
update documentation a bit
Diffstat (limited to 'README')
1 files changed, 10 insertions, 20 deletions
@@ -1,26 +1,16 @@
To build and use the buildroot stuff, do the following:
1) run 'make'
-2) wait while it compiles
-3) run './UMlinux' to test out your root filesystem using User Mode Linux.
-You do not need to be root to build or run this system. Each Virtual Terminal
-will be opened in its own window. You must be running X and have xterm
-installed for this to work -- otherwise you see a few errors on bootup as it
-tries to launch xterms. It will still work on a console, but you will not
-have access to the other Virtual Terminals.
-Also, you the uClibc and busybox source trees that
-are downloaded are fully set up for anonymous CVS access. You may need to set
-up your system for anonymous CVS access by running the following command:
- cvs -d:pserver:firstname.lastname@example.org:/var/cvs login
-Then just hit Enter when it prompts you for a password. You only need to do
-this once. Then, whenever you want to update your system, just go into the
-busybox or uClibc directory and run 'cvs update'.
+2) select which packages you wish to compile
+3) run 'make'
+4) wait while it compiles
+5) Use your shiney new root filesystem. Depending on which sortof
+ root filesystem you selecter, you may want to loop mount it,
+ chroot into it, loop mount it and then nfs mount that on your
+ target device, burn it to flash, or whatever is appropriate
+ for your target system.
+You do not need to be root to build or run buildroot. Have fun!