aboutsummaryrefslogtreecommitdiff
path: root/board/asus
diff options
context:
space:
mode:
authorGravatar Jagan Teki <jagannadh.teki@gmail.com>2018-01-30 13:03:55 +0100
committerGravatar Peter Korsgaard <peter@korsgaard.com>2018-02-06 11:39:48 +0100
commit98b68d08fae47e4946a3883b13f923238ac6dcd4 (patch)
treea355d8f880305f57d94d36dd24f1e85f22df0858 /board/asus
parentcdbb96e0b189ce7a270979993422b9780a3a6224 (diff)
downloadbuildroot-98b68d08fae47e4946a3883b13f923238ac6dcd4.tar.gz
buildroot-98b68d08fae47e4946a3883b13f923238ac6dcd4.tar.bz2
board: Add Tinker RK3288 board support
Add Tinker board, from rk3288 family SOC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board/asus')
-rw-r--r--board/asus/tinker/extlinux.conf4
-rw-r--r--board/asus/tinker/genimage.cfg15
-rwxr-xr-xboard/asus/tinker/post-build.sh9
-rw-r--r--board/asus/tinker/readme.txt37
4 files changed, 65 insertions, 0 deletions
diff --git a/board/asus/tinker/extlinux.conf b/board/asus/tinker/extlinux.conf
new file mode 100644
index 0000000000..136af0debd
--- /dev/null
+++ b/board/asus/tinker/extlinux.conf
@@ -0,0 +1,4 @@
+label Tinker linux-next
+ kernel /boot/uImage
+ devicetree /boot/rk3288-tinker.dtb
+ append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
diff --git a/board/asus/tinker/genimage.cfg b/board/asus/tinker/genimage.cfg
new file mode 100644
index 0000000000..a4b1e8d608
--- /dev/null
+++ b/board/asus/tinker/genimage.cfg
@@ -0,0 +1,15 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot-spl-dtb {
+ in-partition-table = "no"
+ image = "u-boot-spl-dtb.img"
+ offset = 32K
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/asus/tinker/post-build.sh b/board/asus/tinker/post-build.sh
new file mode 100755
index 0000000000..8108ed83ff
--- /dev/null
+++ b/board/asus/tinker/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
+cat $BINARIES_DIR/u-boot-dtb.bin >> $BINARIES_DIR/u-boot-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/asus/tinker/readme.txt b/board/asus/tinker/readme.txt
new file mode 100644
index 0000000000..7372d29520
--- /dev/null
+++ b/board/asus/tinker/readme.txt
@@ -0,0 +1,37 @@
+Tinker RK3288
+=============
+
+Tinker Board is a Single Board Computer (SBC) in an ultra-small form
+factor that offers class-leading performance while leveraging outstanding
+mechanical compatibility.
+
+Tinker link:
+https://www.asus.com/in/Single-Board-Computer/Tinker-Board/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
+
+How to build it
+===============
+
+ $ make asus_tinker_rk3288_defconfig
+
+Then you can edit the build options using
+
+ $ make menuconfig
+
+Compile all and build rootfs image:
+
+ $ make
+
+Prepare your SDCard
+===================
+
+Buildroot generates a ready-to-use SD card image that you can flash directly to
+the card. The image will be in output/images/sdcard.img.
+You can write this image directly to an SD card device (i.e. /dev/xxx):
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/xxx
+ $ sudo sync
+
+Finally, you can insert the SD card to the Tinker RK3288 board and boot it.