aboutsummaryrefslogtreecommitdiff
path: root/board/engicam
diff options
context:
space:
mode:
authorGravatar Jagan Teki <jagan@amarulasolutions.com>2017-06-23 17:56:06 +0530
committerGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2017-06-24 14:32:07 +0200
commit3127e4dcd95939d32b43d9636885c649dd171e54 (patch)
tree634cdb5da6b0e3fb68460f2e4f38928052b359eb /board/engicam
parenta608dab6c61b6b3554977064dd4f700617ca05c5 (diff)
downloadbuildroot-3127e4dcd95939d32b43d9636885c649dd171e54.tar.gz
buildroot-3127e4dcd95939d32b43d9636885c649dd171e54.tar.bz2
board: Add support for Engicam i.CoreM6 RQS SOM
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS board with below features: - U-Boot 2017.07-rc1 - Linux 4.11.5 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [Thomas: add missing host-dosfstools and host-mtools.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'board/engicam')
-rw-r--r--board/engicam/icorem6_rqs/genimage.cfg39
-rw-r--r--board/engicam/icorem6_rqs/readme.txt69
2 files changed, 108 insertions, 0 deletions
diff --git a/board/engicam/icorem6_rqs/genimage.cfg b/board/engicam/icorem6_rqs/genimage.cfg
new file mode 100644
index 0000000000..967d10b18a
--- /dev/null
+++ b/board/engicam/icorem6_rqs/genimage.cfg
@@ -0,0 +1,39 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "uImage",
+ "imx6dl-icore-rqs.dtb",
+ "imx6q-icore-rqs.dtb"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition SPL {
+ in-partition-table = "no"
+ image = "SPL"
+ offset = 1024
+ }
+
+ partition u-boot-dtb {
+ in-partition-table = "no"
+ image = "u-boot-dtb.img"
+ offset = 69K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ }
+}
diff --git a/board/engicam/icorem6_rqs/readme.txt b/board/engicam/icorem6_rqs/readme.txt
new file mode 100644
index 0000000000..a0bf6f508f
--- /dev/null
+++ b/board/engicam/icorem6_rqs/readme.txt
@@ -0,0 +1,69 @@
+*************************************************
+Buildroot for Engicam i.CoreM6 RQS SOM platforms:
+*************************************************
+
+This file documents the Buildroot support for Engicam i.CoreM6 RQS
+SOM platform boards.
+
+i.CoreM6 Quad/Dual/DualLite/Solo RQS SOM Starter kits:
+https://www.engicam.com/vis-prod/101124
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+Build
+=====
+
+First, configure Buildroot for the Engicam i.CoreM6 RQS:
+
+- for i.CoreM6 RQS Quad/Dual/DualLite/Solo:
+
+ make engicam_imx6qdl_icore_rqs_defconfig
+
+Build all components:
+
+ make
+
+You will find the following files in output/images/:
+- for i.CoreM6 Quad/Dual RQS:
+ - imx6q-icore-rqs.dtb
+- for i.CoreM6 DualLite/Solo RQS:
+ - imx6dl-icore-rqs.dtb
+ - rootfs.ext4
+ - rootfs.tar
+ - sdcard.img
+ - SPL
+ - u-boot-dtb.img
+ - uImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+ cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+ dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+ sync
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/engicam/icorem6_rqs/genimage.cfg
+
+Boot the i.CoreM6 RQS boards with SD boot:
+=========================================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- connect 3-wire RS232 serial port J7 on board, and connect with other
+ serial end or USB cable(if serial-to-usb converter used) using
+ a terminal emulator at 115200 bps, 8n1;
+- close JM2 for sd boot.
+- power on the board.
+
+Enjoy!