aboutsummaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorGravatar Gustavo Zacarias <gustavo@zacarias.com.ar>2014-01-21 10:27:01 -0300
committerGravatar Peter Korsgaard <peter@korsgaard.com>2014-01-21 15:39:08 +0100
commit0e8f79b80b9c110c345f59499782ab1fa6e75a62 (patch)
tree37e96f60a126ec2d4fd25ad2b78d8641b44c9539 /board/freescale
parentff5d6d9a06f1a0964dbab3df75a0a869276d7982 (diff)
downloadbuildroot-0e8f79b80b9c110c345f59499782ab1fa6e75a62.tar.gz
buildroot-0e8f79b80b9c110c345f59499782ab1fa6e75a62.tar.bz2
configs/p1010rdb: bump to the latest and greatest versions
Rename the defconfig to note that it's explicitly intended for the PA kit revision since it'll likely brick a PB if the bootloader is flashed without changing the U-Boot board name (and that it's untested in real hardware). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/p1010rdb/linux-3.13.config (renamed from board/freescale/p1010rdb/linux-3.12.config)15
-rw-r--r--board/freescale/p1010rdb/readme.txt16
2 files changed, 17 insertions, 14 deletions
diff --git a/board/freescale/p1010rdb/linux-3.12.config b/board/freescale/p1010rdb/linux-3.13.config
index 5cdb4131d0..b91d312550 100644
--- a/board/freescale/p1010rdb/linux-3.12.config
+++ b/board/freescale/p1010rdb/linux-3.13.config
@@ -1,13 +1,12 @@
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -45,16 +44,13 @@ CONFIG_NET_IPIP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_MTD_CFI=y
@@ -84,7 +80,6 @@ CONFIG_DUMMY=y
CONFIG_GIANFAR=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
@@ -92,16 +87,13 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_SPI=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
-CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_USB=y
CONFIG_USB_MON=y
@@ -118,9 +110,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
-# CONFIG_NET_DMA is not set
CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
@@ -132,12 +122,11 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_CRC_T10DIF=y
+CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt
index 42706fde75..b73ef4d537 100644
--- a/board/freescale/p1010rdb/readme.txt
+++ b/board/freescale/p1010rdb/readme.txt
@@ -6,7 +6,21 @@ It won't work for NAND or SPI and will brick those bootloaders!
Also don't go playing around with different U-boot versions or flash targets
unless you've got the necessary hardware and/or know-how to unbrick your kit.
-2013.10 is known good for NOR.
+2014.01 is known good for NOR on the P1010RDB-PA kit.
+
+Freescale released a revised version of the kit with a faster processor and
+some other hardware changes named P1010RDB-PB. U-Boot needs to be configured
+differently for this kit hence this default config WILL NOT WORK.
+This is ONLY related to U-Boot, otherwise the configuration is the same,
+you can perfectly use the generated kernel and rootfs.
+
+IF you want to build an U-Boot for the new kit just change
+BR2_TARGET_UBOOT_BOARDNAME from P1010RDB-PA_NOR to P1010RDB-PB_NOR.
+!!!!! THIS IS COMPLETELY UNTESTED BY BR DEVS SO YOU ARE ON YOUR OWN !!!!!
+If it works we'd like to know so drop an email to the mailing list. Thanks.
+
+If your kit doesn't mention PA nor PB in their shipping inventory then it's
+the old version (PA).
******************** WARNING ********************
You'll need to program the files created by buildroot into the flash.