aboutsummaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorGravatar Fabio Estevam <fabio.estevam@nxp.com>2016-11-07 12:55:27 -0200
committerGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2016-11-07 23:04:43 +0100
commit177bbf65669cff25eaff5e0dfbf87ae161ab8803 (patch)
tree00beb92d94a4f387344847e010c1caa5f5086813 /board/freescale
parenta4cbf58f836c8e46f8cdbc9e1eabe1d0b606ce6a (diff)
downloadbuildroot-177bbf65669cff25eaff5e0dfbf87ae161ab8803.tar.gz
buildroot-177bbf65669cff25eaff5e0dfbf87ae161ab8803.tar.bz2
configs/imx23evk: Add support for imx23evk
Add support for imx23evk board. For more information about this board, please check: http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx23-evaluation-kit:IMX23EVK Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/imx23evk/readme.txt48
1 files changed, 48 insertions, 0 deletions
diff --git a/board/freescale/imx23evk/readme.txt b/board/freescale/imx23evk/readme.txt
new file mode 100644
index 0000000000..6574577dcc
--- /dev/null
+++ b/board/freescale/imx23evk/readme.txt
@@ -0,0 +1,48 @@
+**************************
+Freescale i.MX23 EVK board
+**************************
+
+This file documents the Buildroot support for the Freescale i.MX23 EVK board.
+
+Build
+=====
+
+First, configure Buildroot for your i.MX23 EVK board:
+
+ make imx23evk_defconfig
+
+Build all components:
+
+ make
+
+You will find in output/images/ directory the following files:
+ - imx23-evk.dtb
+ - rootfs.tar
+ - u-boot.sd
+ - zImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+ cat /proc/partitions
+
+Then, run the following command:
+
+*** WARNING! The command will destroy all the card content. Use with care! ***
+
+ sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
+
+Boot the i.MX23 EVK board
+=========================
+
+- Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot
+ from the SD card
+- Insert the SD card in the SD Card slot of the board;
+- Connect an RS232 UART cable to the Debug UART Port and connect using a
+ terminal emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!