path: root/board
diff options
authorGravatar Nikolay Dimitrov <picmaster@mail.bg>2015-03-06 06:11:25 +0200
committerGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2015-03-06 23:52:01 +0100
commit3c9aa3218339ce8d896adfc5facd812b1fffa889 (patch)
treea007161b6d918a396d8c7bb2156f3a4c15164844 /board
parent591cb698d7768a52c1f1c527345782b500142edc (diff)
board: add support for RIoTboard
This is a small development board, based on Freescale IMX6 Solo SoC (single core ARM Cortex-A9). The board has excellent support in mainline U-Boot and Linux. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'board')
2 files changed, 52 insertions, 0 deletions
diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt
new file mode 100644
index 0000000000..8c31bbec4e
--- /dev/null
+++ b/board/embest/riotboard/readme.txt
@@ -0,0 +1,46 @@
+Buildroot for Embest RIoTboard
+1. Compiling buildroot
+make riotboard_defconfig
+2. Installing buildroot
+Prepare an SD-card and plug it into your card reader. Write the bootloader to
+your SD-card:
+sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1
+Create 1 partition on the SD-card using your favourite tool. The partition
+should be big enough to hold your rootfs, for example 128MiB. Here's how an
+example of such partition layout:
+ Device Boot Start End Blocks Id System
+/dev/sdX1 2048 264191 131072 83 Linux
+Format the SD-card partition with your favourite filesystem:
+sudo mkfs.ext2 /dev/sdX1
+Deploy your rootfs to the SD-card:
+sudo mkdir /mnt/sdcard/
+sudo mount /dev/sdX1 /mnt/sdcard/
+sudo tar xf rootfs.tar -C /mnt/sdcard/
+sudo umount /dev/sdX1
+3. Running buildroot
+Position the board so you can read the label "RIoTboard" on the right side of
+SW1 DIP switches. Configure the SW1 swiches like this:
+10100101 (1 means ON position, 0 means OFF position)
+Now plug your prepared SD-card in slot J6. Connect a serial console (115200, 8,
+N, 1) to header J18. Connect a 5V/1A power supply to the board and enjoy your
+new toy.
diff --git a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..c7d32e0097
--- /dev/null
+++ b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,6 @@
+default buildroot
+label buildroot
+kernel /boot/uImage
+devicetree /boot/imx6dl-riotboard.dtb
+append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw