path: root/board
diff options
authorGravatar Yann E. MORIN <yann.morin.1998@free.fr>2015-02-24 23:42:22 +0100
committerGravatar Peter Korsgaard <peter@korsgaard.com>2015-02-26 22:43:37 +0100
commit7a0c134e7cebac125ebacaf52d5105ffe45cfe25 (patch)
treeb4da91afd2c6654647dfaddee80c3d44726f960b /board
parent9085505c029f8fee8aa80cbb56991088d9ad2784 (diff)
boards/raspberrypi: update instructions for Raspberry Pi 2
The instructions for the Raspberry Pi 2 (aka model B2) are the same as the ones for the Raspberry Pi, so: - state so in the existing readme - create a symlink raspberrypi2 -> raspberrypi Also fix typo in spelling of "Raspberry Pi" (two words, not one). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board')
2 files changed, 9 insertions, 3 deletions
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index ead9227a11..9bab374b67 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -1,9 +1,14 @@
+Raspberry Pi
-To be able to use your RaspberryPi board with the images generated by
+These instructions apply to all models of the Raspberry Pi:
+ - the original models A and B,
+ - the "enhanced" models A+ and B+,
+ - the model B2 (aka Raspberry Pi 2).
+To be able to use your Raspberry Pi board with the images generated by
Buildroot, you have to choose whether you will use:
* Volatile rootfs in RAM (the rootfs is an initramfs) or
@@ -96,7 +101,7 @@ Mount the partitions (adjust 'sdX' to match your SDcard device):
Install the binaries to the SDCard
-At the root of the boot partition, the RaspberryPi must find the following
+At the root of the boot partition, the Raspberry Pi must find the following
* bcm2708-rpi-b.dtb [2]
diff --git a/board/raspberrypi2 b/board/raspberrypi2
new file mode 120000
index 0000000000..fcdafc81ed
--- /dev/null
+++ b/board/raspberrypi2
@@ -0,0 +1 @@
+raspberrypi \ No newline at end of file