aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorGravatar Matt Weber <matthew.weber@rockwellcollins.com>2018-03-04 20:47:00 -0600
committerGravatar Peter Korsgaard <peter@korsgaard.com>2018-03-06 12:01:01 +0100
commit9f13f8c2374e8240c1b85c702257341df80bd797 (patch)
treef520b5a17c47029648dfc188d5a39a9e5b5ed3e8 /board
parentb0fd706c2fe77157ec9d157568acf535d7d8daca (diff)
downloadbuildroot-9f13f8c2374e8240c1b85c702257341df80bd797.tar.gz
buildroot-9f13f8c2374e8240c1b85c702257341df80bd797.tar.bz2
freescale_p1010rdb_pa_defconfig: remove board
This defconfig currently doesn't build with GCC6 (Linux 4.1). https://gitlab.com/buildroot.org/buildroot/-/jobs/55306827 A maintainer w/board isn't available to make updates, so removing this config. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/p1010rdb/linux-4.1.config70
-rw-r--r--board/freescale/p1010rdb/readme.txt40
2 files changed, 0 insertions, 110 deletions
diff --git a/board/freescale/p1010rdb/linux-4.1.config b/board/freescale/p1010rdb/linux-4.1.config
deleted file mode 100644
index 2de430cbee..0000000000
--- a/board/freescale/p1010rdb/linux-4.1.config
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_P1010_RDB=y
-CONFIG_HIGHMEM=y
-CONFIG_SWIOTLB=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt
deleted file mode 100644
index 025c97e8a8..0000000000
--- a/board/freescale/p1010rdb/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-1. Program the DTB to NOR flash
-
- => tftp $loadaddr p1010rdb-pa.dtb
- => erase 0xee000000 +$filesize
- => cp.b $loadaddr 0xee000000 $filesize
-
-2. Program the kernel to NOR flash
-
- => tftp $loadaddr uImage
- => erase 0xee080000 +$filesize
- => cp.b $loadaddr 0xee080000 $filesize
-
-3. Program the root filesystem to NOR flash
-
- => tftp $loadaddr rootfs.jffs2
- => erase 0xee800000 0xeff5ffff
- => cp.b $loadaddr 0xee800000 $filesize
-
-4. Booting your new system
-
- => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
-
- If you want to set this boot option as default:
-
- => setenv bootcmd 'run norboot'
- => saveenv
-
- ...or for a single boot:
-
- => run norboot
-
- You can login with user "root".