|author||Thomas Petazzoni <firstname.lastname@example.org>||2016-11-07 22:01:51 +0100|
|committer||Thomas Petazzoni <email@example.com>||2016-11-07 22:01:51 +0100|
configs/qmx6: remove defconfig
The original submitter and follow-up contributors to the qmx6 defconfig no longer have the hardware available or the time/interest to update this defconfig, which currently fails to build with gcc 5.x. Due to this, this commit removes this defconfig. Signed-off-by: Thomas Petazzoni <firstname.lastname@example.org>
Diffstat (limited to 'board')
1 files changed, 0 insertions, 36 deletions
diff --git a/board/congatec/qmx6/readme.txt b/board/congatec/qmx6/readme.txt
deleted file mode 100644
@@ -1,36 +0,0 @@
-This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
-conga-QMX6 is based on the freescale iMX6 SoC. For more information please
-have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
-The configuration is based on the currently latest kernel release from
-Congatec's git repository which is based on 3.0.35. The bootloader u-boot
-is preconfigured on the CPU module and does not need to be replaced.
-To build the default configuration you only have to:
- make qmx6_defconfig && make
-You will need a microSD card of sufficient size and the first or only
-partition configured as Linux type.
-To transfer the system to the card do:
- $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
-You can optionally extend the filesystem size to the whole partition:
- $ sudo resize2fs /dev/sdX1
-You can also update the card image without completely rewriting it:
- $ sudo mount /dev/sdX1 /mnt
- $ sudo tar xf output/images/rootfs.tar -C /mnt
- $ sudo umount /mnt
-Connect a terminal program to the rs232 connector marked "CONSOLE"
-with baudrate set to 115200, insert the microSD card into the socket
-on the CPU module and power the board to watch the system boot.
-Booting from the SD card slot on the base board is currently not