aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorGravatar Jagan Teki <jagannadh.teki@gmail.com>2018-01-30 13:03:53 +0100
committerGravatar Peter Korsgaard <peter@korsgaard.com>2018-02-06 11:39:48 +0100
commitcdbb96e0b189ce7a270979993422b9780a3a6224 (patch)
tree8e13bb3cf6ce14b1125cce5085b4f751b8ac6cdc /board
parent30daaed1935004661cf54d90dc361a3f1d9d509c (diff)
downloadbuildroot-cdbb96e0b189ce7a270979993422b9780a3a6224.tar.gz
buildroot-cdbb96e0b189ce7a270979993422b9780a3a6224.tar.bz2
board: Add Vyasa RK3288 board support
Add Vyasa board, from rk3288 family SOC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board')
-rw-r--r--board/amarula/vyasa/extlinux.conf4
-rw-r--r--board/amarula/vyasa/genimage.cfg21
-rw-r--r--board/amarula/vyasa/linux_gmac.fragment3
-rwxr-xr-xboard/amarula/vyasa/post-build.sh9
-rw-r--r--board/amarula/vyasa/readme.txt31
5 files changed, 68 insertions, 0 deletions
diff --git a/board/amarula/vyasa/extlinux.conf b/board/amarula/vyasa/extlinux.conf
new file mode 100644
index 0000000000..a8fcc35f5a
--- /dev/null
+++ b/board/amarula/vyasa/extlinux.conf
@@ -0,0 +1,4 @@
+label Vyasa linux-next
+ kernel /boot/uImage
+ devicetree /boot/rk3288-vyasa.dtb
+ append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
diff --git a/board/amarula/vyasa/genimage.cfg b/board/amarula/vyasa/genimage.cfg
new file mode 100644
index 0000000000..fa41de3672
--- /dev/null
+++ b/board/amarula/vyasa/genimage.cfg
@@ -0,0 +1,21 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot-tpl-spl-dtb {
+ in-partition-table = "no"
+ image = "u-boot-tpl-spl-dtb.img"
+ offset = 32K
+ }
+
+ partition u-boot-dtb {
+ in-partition-table = "no"
+ image = "u-boot-dtb.img"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/amarula/vyasa/linux_gmac.fragment b/board/amarula/vyasa/linux_gmac.fragment
new file mode 100644
index 0000000000..8ebf383597
--- /dev/null
+++ b/board/amarula/vyasa/linux_gmac.fragment
@@ -0,0 +1,3 @@
+# Currently mainline kernel exhibits issues when running rockchip gmac
+# on the board, so enable it as loadable module and insert it later
+CONFIG_DWMAC_ROCKCHIP=m
diff --git a/board/amarula/vyasa/post-build.sh b/board/amarula/vyasa/post-build.sh
new file mode 100755
index 0000000000..ffbbcdeb58
--- /dev/null
+++ b/board/amarula/vyasa/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
+cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/amarula/vyasa/readme.txt b/board/amarula/vyasa/readme.txt
new file mode 100644
index 0000000000..b95889e814
--- /dev/null
+++ b/board/amarula/vyasa/readme.txt
@@ -0,0 +1,31 @@
+Vyasa RK3288
+============
+
+Vyasa is RK3288 based Single board computer with fully supported opensource software.
+
+https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288
+
+How to build it
+===============
+
+ $ make amarula_vyasa_rk3288_defconfig
+
+Then you can edit the build options using
+
+ $ make menuconfig
+
+Compile all and build rootfs image:
+
+ $ make
+
+Prepare your SDCard
+===================
+
+Buildroot generates a ready-to-use SD card image that you can flash directly to
+the card. The image will be in output/images/sdcard.img.
+You can write this image directly to an SD card device (i.e. /dev/xxx):
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/xxx
+ $ sudo sync
+
+Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.