path: root/board
diff options
authorGravatar Fabio Estevam <festevam@gmail.com>2017-09-25 08:59:43 -0300
committerGravatar Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>2017-09-27 00:26:50 +0200
commitd5935bf70dc89c639bd7e2a7eed0578a7673edca (patch)
tree7de5ab7bdd45a51b8a76670061006b9e0a3a6b2d /board
parent1ef5e6f2a55459983ea118a549c47359b0d38df2 (diff)
configs/imx6q-sabresd: Drop the 'quad' notation
Now that SPL is supported a single image can run on the different variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp. So drop the 'quad' prefix from defconfig, directory and readme file to make it generic. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/imx6-sabresd/linux_qt5.fragment (renamed from board/freescale/imx6q-sabresd/linux_qt5.fragment)0
-rw-r--r--board/freescale/imx6-sabresd/readme.txt (renamed from board/freescale/imx6q-sabresd/readme.txt)23
-rw-r--r--board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json (renamed from board/freescale/imx6q-sabresd/rootfs_overlay/root/sabresd.json)0
3 files changed, 14 insertions, 9 deletions
diff --git a/board/freescale/imx6q-sabresd/linux_qt5.fragment b/board/freescale/imx6-sabresd/linux_qt5.fragment
index 5c0505e510..5c0505e510 100644
--- a/board/freescale/imx6q-sabresd/linux_qt5.fragment
+++ b/board/freescale/imx6-sabresd/linux_qt5.fragment
diff --git a/board/freescale/imx6q-sabresd/readme.txt b/board/freescale/imx6-sabresd/readme.txt
index b57c4fb0e1..ff6c9ba2bd 100644
--- a/board/freescale/imx6q-sabresd/readme.txt
+++ b/board/freescale/imx6-sabresd/readme.txt
@@ -1,18 +1,21 @@
-Freescale i.MX6Q Sabre SD board
+Freescale i.MX6 Sabre SD boards
-This file documents the Buildroot support for the Freescale i.MX6Q Sabre SD
+This file documents the Buildroot support for the Freescale i.MX6 Sabre SD
+boards based on i.MX6Q, i.MX6DL and iMX6QP.
+Thanks to the SPL support in U-Boot it is possible to run a single
+sdcard.img in all i.MX6 Sabre SD board variants.
This configuration uses U-Boot mainline and kernel mainline.
-First, configure Buildroot for the i.MX6Q Sabre SD board:
+First, configure Buildroot for the i.MX6 Sabre SD board:
- make imx6q-sabresd_defconfig
+ make imx6-sabresd_defconfig
Build all components:
@@ -20,6 +23,8 @@ Build all components:
You will find the following files in output/images/ :
- imx6q-sabresd.dtb
+ - imx6dl-sabresd.dtb
+ - imx6qp-sabresd.dtb
- rootfs.ext4
- rootfs.tar
- sdcard.img
@@ -45,8 +50,8 @@ command as root:
For details about the medium image layout, see the definition in
-Boot the i.MX6Q Sabre SD board
+Boot the i.MX6 Sabre SD board
To boot your newly created system:
- insert the SD card in the SD3 slot of the board (close to the HDMI connector);
@@ -54,8 +59,8 @@ To boot your newly created system:
emulator at 115200 bps, 8n1;
- power on the board.
-Testing graphics on the i.MX6Q Sabre SD board
+Testing graphics on the i.MX6 Sabre SD board
The imx6q-sabresd_qt5_defconfig allows to quickly test the graphics
capabilities of i.MX6 using the opensource Etnaviv graphics stack
diff --git a/board/freescale/imx6q-sabresd/rootfs_overlay/root/sabresd.json b/board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json
index 9469dc12a5..9469dc12a5 100644
--- a/board/freescale/imx6q-sabresd/rootfs_overlay/root/sabresd.json
+++ b/board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json