aboutsummaryrefslogtreecommitdiff
path: root/boot/u-boot/Config.in
diff options
context:
space:
mode:
authorGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2010-03-17 08:40:35 +0100
committerGravatar Thomas Petazzoni <thomas.petazzoni@free-electrons.com>2010-06-12 13:23:47 +0200
commitafd3bd2b03a36a42aa19124a5a8f70c7edfebfd5 (patch)
tree0186ad42c8a1536e5a50a8663dce05e4eec9406b /boot/u-boot/Config.in
parentf2d16ae0e17370131e64438cd50d5a6c7ab0ea8d (diff)
downloadbuildroot-afd3bd2b03a36a42aa19124a5a8f70c7edfebfd5.tar.gz
buildroot-afd3bd2b03a36a42aa19124a5a8f70c7edfebfd5.tar.bz2
u-boot: further simplify the configuration
Remove all the bootsource selection mechanism and the horribly complicated BR2_TARGET_UBOOT_DEFAULT_ENV thing, which wanted to be generic, but was in fact very AT91-specific. Just keep things simple: we build U-Boot with the board configuration file specified in BR2_TARGET_UBOOT_BOARDNAME. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'boot/u-boot/Config.in')
-rw-r--r--boot/u-boot/Config.in247
1 files changed, 0 insertions, 247 deletions
diff --git a/boot/u-boot/Config.in b/boot/u-boot/Config.in
index 78a195d25d..a4f5fd9542 100644
--- a/boot/u-boot/Config.in
+++ b/boot/u-boot/Config.in
@@ -42,53 +42,6 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
Most users may leave this empty
-choice
- prompt "Bootsource"
- depends on BR2_BOOTSOURCE
- default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
- bool "Boot from dataflashcard"
- depends on BR2_BOOTSOURCE_DATAFLASHCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- bool "Boot from dataflash"
- depends on BR2_BOOTSOURCE_DATAFLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
- bool "Boot from a NAND flash"
- depends on BR2_BOOTSOURCE_NANDFLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
- bool "Boot from a parallell flash"
- depends on BR2_BOOTSOURCE_FLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
- bool "Boot from an SD-Card"
- depends on BR2_BOOTSOURCE_SDCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
- bool "Boot from a serial EEPROM (Not yet supported)"
- depends on BR2_BOOTSOURCE_EEPROM
-
-endchoice
-
-config BR2_TARGET_UBOOT_BOOTSOURCE
- string
- depends on BR2_BOOTSOURCE
- default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
- default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
- default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
- default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
- default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
-
-config BR2_TARGET_UBOOT_SILENT
- bool "silent console"
- help
- If the option has been enabled, the output can be
- silenced by setting the environment variable "silent".
-
config BR2_TARGET_UBOOT_TOOL_MKIMAGE
bool "mkimage tool in target"
help
@@ -99,165 +52,6 @@ config BR2_TARGET_UBOOT_TOOL_ENV
help
Install fw_printenv / fw_setenv tools in target.
-menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV
- bool "Generate a default environment"
- help
- Will generate variables for factory default command
- and autoscript.
-
-if BR2_TARGET_UBOOT_DEFAULT_ENV
-choice
- prompt "SDRAM Memory size"
- default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
- help
- Size of the onboard SDRAM
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
- bool "256 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
- bool "128 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
- bool "64 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
- bool "32 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
- bool "16 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
- bool "8 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_MEMORY_SIZE
- string
- default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
- default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
- default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
- default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
- default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
- default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
-
-choice
- prompt "Kernel Size"
- default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- bool "Kernel size is less than 1.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- bool "Kernel size is less than 1.50 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- bool "Kernel size is less than 1.75 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- bool "Kernel size is less than 2.00 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- bool "Kernel size is less than 2.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- bool "Kernel size is less than 2.50 MB"
-
-endchoice
-
-choice
- prompt "Dataflash Size"
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
- bool "Dataflash size is 8 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
- bool "Dataflash size is 4 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
- bool "Dataflash size is 2 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
- bool "Dataflash size is 1 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
- bool "Dataflash size is 0.5 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
- bool "Dataflash size is 0.25 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB
- default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB
- default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB
- default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB
- default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB
- default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB
-
-config BR2_TARGET_UBOOT_END_OF_FLASH
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
- default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
- default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
- default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
- default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
- default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
- help
-
-config BR2_TARGET_UBOOT_KERNEL_START
- string "Kernel SDRAM address"
- default "21000000"
- help
- Kernel is loaded to this address in SDRAM
-
-config BR2_TARGET_UBOOT_KERNEL_LOCATION
- string "Kernel flash address"
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
- BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default ""
- help
- Kernel location in dataflash
-
-config BR2_TARGET_UBOOT_FILESYSTEM_START
- string
- default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- help
- Kernel is loaded to this SDRAM address
- Assumes SDRAM starts at 20000000
- Will need to be updated if the SDRAM is located elsewhere
-
-config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
- BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- help
- Determine location for File System in Dataflash
- This needs to be updated for other memory technologies
-
-config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
- string "File System Size"
- default "6000000"
- help
-
menuconfig BR2_TARGET_UBOOT_NETWORK
bool "Network Settings"
default y
@@ -304,45 +98,4 @@ config BR2_TARGET_UBOOT_ETH1ADDR
endif # BR2_TARGET_UBOOT_NETWORK
-endif # BR2_TARGET_UBOOT_DEFAULT_ENV
-
endif # BR2_TARGET_UBOOT
-
-config BR2_BOOTSOURCE_DATAFLASHCARD
- bool
- help
- Allow use of a dataflashcard as a boot source
-
-config BR2_BOOTSOURCE_DATAFLASH
- bool
- help
- Allow use of a dataflash as a boot source
-
-config BR2_BOOTSOURCE_NANDFLASH
- bool
- help
- Allow use of a NAND flash as a boot source
-
-config BR2_BOOTSOURCE_FLASH
- bool
- help
- Allow use of a flash RAM as a boot source
-
-config BR2_BOOTSOURCE_SDCARD
- bool
- help
- Allow use of an SD-card as a boot source
-
-config BR2_BOOTSOURCE_EEPROM
- bool
- help
- Allow use of a serial eeprom as a boot source
-
-config BR2_BOOTSOURCE
- bool
- default y if BR2_BOOTSOURCE_DATAFLASHCARD
- default y if BR2_BOOTSOURCE_DATAFLASH
- default y if BR2_BOOTSOURCE_NANDFLASH
- default y if BR2_BOOTSOURCE_FLASH
- default y if BR2_BOOTSOURCE_SDCARD
- default y if BR2_BOOTSOURCE_EEPROM