aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/imx6sabre/readme.txt63
-rw-r--r--configs/freescale_imx6sxsabresd_defconfig35
2 files changed, 84 insertions, 14 deletions
diff --git a/board/freescale/imx6sabre/readme.txt b/board/freescale/imx6sabre/readme.txt
index 685088552b..6c44e22c36 100644
--- a/board/freescale/imx6sabre/readme.txt
+++ b/board/freescale/imx6sabre/readme.txt
@@ -1,14 +1,19 @@
-*******************************************************
-Freescale i.MX6Q and i.MX6DL SABRESD development boards
-*******************************************************
+********************************************************
+Freescale i.MX6 Q, DL and SoloX SABRE development boards
+********************************************************
-This file documents the Buildroot support for the Freescale SABRE Board for
-Smart Devices Based on the i.MX 6 Series (SABRESD), as well as the Freescale
-SABRE Board for Automotive Infotainment.
+This file documents the Buildroot support for the Freescale SABRE Board
+for Smart Devices Based on the i.MX 6 and i.MX 6SoloX Series (SABRESD),
+as well as the Freescale SABRE Board for Automotive Infotainment.
-Read the SABRESD Quick Start Guide for an introduction to the board:
+Read the i.MX 6 SABRESD Quick Start Guide for an introduction to the
+board:
http://cache.freescale.com/files/32bit/doc/quick_start_guide/SABRESDB_IMX6_QSG.pdf
+Read the i.MX 6 SoloX SABRESD Quick Start Guide for an introduction to
+the board:
+http://cache.freescale.com/files/32bit/doc/user_guide/IMX6SOLOXQSG.pdf
+
Read the SABRE for Automotive Infotainment Quick Start Guide for an
introduction to the board:
http://cache.freescale.com/files/32bit/doc/user_guide/IMX6SABREINFOQSG.pdf
@@ -25,6 +30,10 @@ For i.MX6DL SABRE SD board:
make freescale_imx6dlsabresd_defconfig
+For i.MX6 SoloX SABRE SD board:
+
+ make freescale_imx6sxsabresd_defconfig
+
For i.MX6Q SABRE Auto board:
make freescale_imx6qsabreauto_defconfig
@@ -38,12 +47,12 @@ Build all components:
make
You will find in ./output/images/ the following files:
- - imx6dl-sabresd.dtb or imx6q-sabresd.dtb or imx6q-sabreauto.dtb or
- imx6dl-sabreauto.dtb
+ - imx6dl-sabresd.dtb or imx6q-sabresd.dtb or imx6sx-sdb.dtb or
+ imx6q-sabreauto.dtb or imx6dl-sabreauto.dtb
- rootfs.ext2
- rootfs.tar
- u-boot.imx
- - uImage
+ - uImage, or zImage for i.MX6 SoloX
Create a bootable SD card
=========================
@@ -63,17 +72,43 @@ and copy the bootloader, kernel, DTBs and root filesystem as needed.
Boot the SABRE board
====================
-SABRE SD
---------
+i.MX6 SABRE SD
+--------------
-To boot your newly created system on a SABRE SD Board (refer to the SABRE SD
-Quick Start Guide for guidance):
+To boot your newly created system on an i.MX6 SABRE SD Board (refer to
+the i.MX6 SABRE SD Quick Start Guide for guidance):
- insert the SD card in the SD3 slot of the board;
- locate the BOOT dip switches (SW6), set dips 2 and 7 to ON, all others to OFF;
- connect a Micro USB cable to Debug Port and connect using a terminal emulator
at 115200 bps, 8n1;
- power on the board.
+i.MX6 SoloX SABRE SD
+--------------------
+
+To boot your newly created system on an i.MX6 SoloX SABRE SD Board
+(refer to the i.MX6 SoloX SABRE SD Quick Start Guide for guidance):
+- insert the SD card in the J4-SD4 socket at the bottom of the board;
+- Set the SW10, SW11 and SW12 DIP switches at the top of the board in
+ their default position, to boot from SD card. Reference configuration:
+
+ SW10
+ 1 2 3 4 5 6 7 8
+ off off off off off off off off
+
+ SW11
+ 1 2 3 4 5 6 7 8
+ off off ON ON ON off off off
+
+ SW12
+ 1 2 3 4 5 6 7 8
+ off ON off off off off off off
+
+- connect a Micro USB cable to the J16 Debug Port at the bottom of the
+ board. This is a dual UART debug port; connect to the first tty using
+ a terminal emulator at 115200 bps, 8n1;
+- power on the board with the SW1-PWR switch at the top of the board.
+
SABRE Auto
----------
diff --git a/configs/freescale_imx6sxsabresd_defconfig b/configs/freescale_imx6sxsabresd_defconfig
new file mode 100644
index 0000000000..bd0d6cc375
--- /dev/null
+++ b/configs/freescale_imx6sxsabresd_defconfig
@@ -0,0 +1,35 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# patches
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
+
+# toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.10.53"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-sdb"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga"
+BR2_TARGET_UBOOT_FORMAT_IMX=y