aboutsummaryrefslogtreecommitdiff
path: root/board/avnet/microzed/readme.txt
diff options
context:
space:
mode:
Diffstat (limited to 'board/avnet/microzed/readme.txt')
-rw-r--r--board/avnet/microzed/readme.txt33
1 files changed, 0 insertions, 33 deletions
diff --git a/board/avnet/microzed/readme.txt b/board/avnet/microzed/readme.txt
deleted file mode 100644
index 927e97a32c..0000000000
--- a/board/avnet/microzed/readme.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-This is the buildroot board support for the Avnet Microzed. The Microzed is
-a development board based on the Xilinx Zynq-7000 based All-Programmable
-System-On-Chip.
-
-Microzed information including schematics, reference designs, and manuals are
-available from http://www.zedboard.org .
-
-Steps to create a working system for Microzed:
-
-1) make zynq_microzed_defconfig
-2) make
-2) make
-3) All needed files will be available in the output/images directory.
- Create a FAT32 partition at the beginning of your SD Card and copy files:
- - boot.bin
- - u-boot.img
- - uImage
- - uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
- - devicetree.dtb (should be renamed from zynq-zed.dtb)
- into your SD card
-4) boot your Microzed
-
-Note th at the DTB (zynq-zed.dtb) is the same as the one used for the
-Zedboard, and that this is the recommended solution, see
-https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.
-
-You can alter the booting procedure by creating a file uEnv.txt
-in the root of the SD card. It is a plain text file in format
-<key>=<value> one per line:
-
-kernel_image=myimage
-modeboot=myboot
-myboot=...