aboutsummaryrefslogtreecommitdiff
path: root/board/freescale/mpc8315erdb/readme.txt
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mpc8315erdb/readme.txt')
-rw-r--r--board/freescale/mpc8315erdb/readme.txt40
1 files changed, 0 insertions, 40 deletions
diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt
deleted file mode 100644
index b4c87b4d4a..0000000000
--- a/board/freescale/mpc8315erdb/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-1. Program the kernel to NAND flash
-
- => tftp $loadaddr uImage
- => nand erase 0x100000 0x1e0000
- => nand write $loadaddr 0x100000 0x1e0000
-
-2. Program the DTB to NAND flash
-
- => tftp $loadaddr mpc8315erdb.dtb
- => nand erase 0x2e0000 0x20000
- => nand write $loadaddr 0x2e0000 0x20000
-
-3. Program the root filesystem to NAND flash
-
- => tftp $loadaddr rootfs.jffs2
- => nand erase 0x400000 0x1c00000
- => nand write $loadaddr 0x400000 $filesize
-
-4. Booting your new system
-
- => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
-
- If you want to set this boot option as default:
-
- => setenv bootcmd 'run nandboot'
- => saveenv
-
- ...or for a single boot:
-
- => run nandboot
-
- You can login with user "root".