aboutsummaryrefslogtreecommitdiff
path: root/board/raspberrypi
diff options
context:
space:
mode:
Diffstat (limited to 'board/raspberrypi')
-rwxr-xr-xboard/raspberrypi/post-image.sh42
1 files changed, 23 insertions, 19 deletions
diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh
index de972998b0..3900a15727 100755
--- a/board/raspberrypi/post-image.sh
+++ b/board/raspberrypi/post-image.sh
@@ -5,38 +5,42 @@ BOARD_NAME="$(basename ${BOARD_DIR})"
GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-case "${2}" in
- --add-pi3-miniuart-bt-overlay)
- if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
- cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
+for arg in "$@"
+do
+ case "${arg}" in
+ --add-pi3-miniuart-bt-overlay)
+ if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
+ echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
+ cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# fixes rpi3 ttyAMA0 serial console
dtoverlay=pi3-miniuart-bt
__EOF__
- fi
- ;;
- --aarch64)
- # Run a 64bits kernel (armv8)
- sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
- if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
+ fi
+ ;;
+ --aarch64)
+ # Run a 64bits kernel (armv8)
+ sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
+ if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
+ cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# enable 64bits support
arm_control=0x200
__EOF__
- fi
+ fi
- # Enable uart console
- if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
+ # Enable uart console
+ if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
+ cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# enable rpi3 ttyS0 serial console
enable_uart=1
__EOF__
- fi
- ;;
-esac
+ fi
+ ;;
+ esac
+
+done
rm -rf "${GENIMAGE_TMP}"