aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/armadeus/readme.txt10
-rw-r--r--board/atmel/sama5d27_som1_ek_mmc/genimage.cfg3
-rw-r--r--board/beagleboardx15/readme.txt22
-rw-r--r--board/beaglebone/readme.txt24
-rw-r--r--board/csky/readme.txt6
-rw-r--r--board/lemaker/bananapro/linux-wifi.fragment1
-rw-r--r--board/orangepi/orangepi-r1/boot.cmd8
-rw-r--r--board/orangepi/orangepi-r1/genimage.cfg36
-rw-r--r--board/orangepi/orangepi-r1/linux-extras.config11
-rw-r--r--board/orangepi/orangepi-r1/readme.txt29
-rw-r--r--board/pandaboard/readme.txt16
-rw-r--r--board/pc/grub-efi.cfg6
-rw-r--r--board/pc/readme.txt8
13 files changed, 125 insertions, 55 deletions
diff --git a/board/armadeus/readme.txt b/board/armadeus/readme.txt
index 98c7b08249..c03508c604 100644
--- a/board/armadeus/readme.txt
+++ b/board/armadeus/readme.txt
@@ -44,11 +44,11 @@ Result of the build
When the build is finished, you will end up with:
output/images/
- ├── imx**-apfxxdev.dtb [1]
- ├── rootfs.tar
- ├── rootfs.ubi
- ├── rootfs.ubifs
- └── uImage
+ +-- imx**-apfxxdev.dtb [1]
+ +-- rootfs.tar
+ +-- rootfs.ubi
+ +-- rootfs.ubifs
+ +-- uImage
[1] Only if the kernel version used uses a Device Tree.
diff --git a/board/atmel/sama5d27_som1_ek_mmc/genimage.cfg b/board/atmel/sama5d27_som1_ek_mmc/genimage.cfg
index f5222ff893..eaa3896fcf 100644
--- a/board/atmel/sama5d27_som1_ek_mmc/genimage.cfg
+++ b/board/atmel/sama5d27_som1_ek_mmc/genimage.cfg
@@ -5,9 +5,6 @@ image boot.vfat {
files = {
"zImage",
"at91-sama5d27_som1_ek.dtb",
- "at91-sama5d27_som1_ek_pda4.dtb",
- "at91-sama5d27_som1_ek_pda7.dtb",
- "at91-sama5d27_som1_ek_pda7b.dtb",
"boot.bin",
"u-boot.bin"
}
diff --git a/board/beagleboardx15/readme.txt b/board/beagleboardx15/readme.txt
index 56ebca8c5f..5af2c914ba 100644
--- a/board/beagleboardx15/readme.txt
+++ b/board/beagleboardx15/readme.txt
@@ -26,17 +26,17 @@ Result of the build
After building, you should get a tree like this:
output/images/
- ├── am57xx-beagle-x15.dtb
- ├── am57xx-beagle-x15-revb1.dtb
- ├── boot.vfat
- ├── MLO
- ├── rootfs.ext2
- ├── rootfs.ext4
- ├── rootfs.tar
- ├── sdcard.img
- ├── u-boot.img
- ├── u-boot-spl.bin
- └── zImage
+ +-- am57xx-beagle-x15.dtb
+ +-- am57xx-beagle-x15-revb1.dtb
+ +-- boot.vfat
+ +-- MLO
+ +--rootfs.ext2
+ +-- rootfs.ext4
+ +-- rootfs.tar
+ +-- sdcard.img
+ +-- u-boot.img
+ +-- u-boot-spl.bin
+ +-- zImage
How to write the microSD card
=============================
diff --git a/board/beaglebone/readme.txt b/board/beaglebone/readme.txt
index e908b22235..e6647dad2a 100644
--- a/board/beaglebone/readme.txt
+++ b/board/beaglebone/readme.txt
@@ -27,18 +27,18 @@ $ make
Result of the build
===================
output/images/
-├── am335x-boneblack.dtb
-├── am335x-bone.dtb
-├── am335x-evm.dtb
-├── am335x-evmsk.dtb
-├── boot.vfat
-├── MLO
-├── rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.img
-├── uEnv.txt
-└── zImage
++-- am335x-boneblack.dtb
++-- am335x-bone.dtb
++-- am335x-evm.dtb
++-- am335x-evmsk.dtb
++-- boot.vfat
++-- MLO
++-- rootfs.ext2
++-- rootfs.tar
++-- sdcard.img
++-- u-boot.img
++-- uEnv.txt
++-- zImage
To copy the image file to the sdcard use dd:
$ dd if=output/images/sdcard.img of=/dev/XXX
diff --git a/board/csky/readme.txt b/board/csky/readme.txt
index b4605c541e..dc82dcc1d7 100644
--- a/board/csky/readme.txt
+++ b/board/csky/readme.txt
@@ -41,9 +41,9 @@ Result of the build
After building, you should obtain this tree:
output/images/
- ├── vmlinux
- ├── rootfs.ext2
- └── <board name>.dtb
+ +-- vmlinux
+ +-- rootfs.ext2
+ +-- <board name>.dtb
How to run it
=============
diff --git a/board/lemaker/bananapro/linux-wifi.fragment b/board/lemaker/bananapro/linux-wifi.fragment
index 8e4bd5cc7d..f4ede39faa 100644
--- a/board/lemaker/bananapro/linux-wifi.fragment
+++ b/board/lemaker/bananapro/linux-wifi.fragment
@@ -2,6 +2,7 @@
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT=y
+CONFIG_RFKILL=y
# Network device support
CONFIG_WLAN=y
diff --git a/board/orangepi/orangepi-r1/boot.cmd b/board/orangepi/orangepi-r1/boot.cmd
new file mode 100644
index 0000000000..e927b01e82
--- /dev/null
+++ b/board/orangepi/orangepi-r1/boot.cmd
@@ -0,0 +1,8 @@
+setenv fdt_high ffffffff
+
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-r1.dtb
+
+bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg
new file mode 100644
index 0000000000..01e2c0adc4
--- /dev/null
+++ b/board/orangepi/orangepi-r1/genimage.cfg
@@ -0,0 +1,36 @@
+# Minimal SD card image for the OrangePi R1
+#
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "sun8i-h2-plus-orangepi-r1.dtb",
+ "boot.scr"
+ }
+ }
+ size = 10M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
diff --git a/board/orangepi/orangepi-r1/linux-extras.config b/board/orangepi/orangepi-r1/linux-extras.config
new file mode 100644
index 0000000000..47ba88f670
--- /dev/null
+++ b/board/orangepi/orangepi-r1/linux-extras.config
@@ -0,0 +1,11 @@
+# spi nor
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_M25P80=y
+
+# ondemand cpufreq governor
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+
+# USB ethernet
+CONFIG_USB_RTL8152=y
diff --git a/board/orangepi/orangepi-r1/readme.txt b/board/orangepi/orangepi-r1/readme.txt
new file mode 100644
index 0000000000..8266499366
--- /dev/null
+++ b/board/orangepi/orangepi-r1/readme.txt
@@ -0,0 +1,29 @@
+OrangePi R1
+
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the OrangePi R1. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+How to build it
+===============
+
+Configure Buildroot:
+
+ $ make orangepi_r1_defconfig
+
+Compile everything and build the SD card image:
+
+ $ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/board/pandaboard/readme.txt b/board/pandaboard/readme.txt
index 1e4820b828..80a20c2743 100644
--- a/board/pandaboard/readme.txt
+++ b/board/pandaboard/readme.txt
@@ -23,14 +23,14 @@ When you are happy with the setup, run:
The result of the build with the default settings should be these files:
output/images
- ├── MLO
- ├── omap4-panda-a4.dtb
- ├── omap4-panda.dtb
- ├── omap4-panda-es.dtb
- ├── rootfs.ext4
- ├── sdcard.img
- ├── u-boot.img
- └── zImage
+ +-- MLO
+ +-- omap4-panda-a4.dtb
+ +-- omap4-panda.dtb
+ +-- omap4-panda-es.dtb
+ +-- rootfs.ext4
+ +-- sdcard.img
+ +-- u-boot.img
+ +-- zImage
How to write the SD card
------------------------
diff --git a/board/pc/grub-efi.cfg b/board/pc/grub-efi.cfg
deleted file mode 100644
index 222301a4e0..0000000000
--- a/board/pc/grub-efi.cfg
+++ /dev/null
@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
- linux /bzImage root=/dev/sda2 rootwait console=tty1
-}
diff --git a/board/pc/readme.txt b/board/pc/readme.txt
index 895331b0af..41aec50d36 100644
--- a/board/pc/readme.txt
+++ b/board/pc/readme.txt
@@ -57,13 +57,7 @@ qemu-system-x86_64 \
Emulation in qemu (UEFI)
========================
-1. Edit grub-efi.cfg
-
- Since the driver will show up in the virtual machine as /dev/vda,
- change board/pc/grub-efi.cfg to use root=/dev/vda2 instead of
- root=/dev/sda2. Then rebuild grub2 and the image.
-
-2. Run the emulation with:
+Run the emulation with:
qemu-system-x86_64 \
-M pc \