aboutsummaryrefslogtreecommitdiff
path: root/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch
diff options
context:
space:
mode:
Diffstat (limited to 'boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch')
-rw-r--r--boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch969
1 files changed, 969 insertions, 0 deletions
diff --git a/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch b/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch
new file mode 100644
index 0000000000..39966f01e9
--- /dev/null
+++ b/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch
@@ -0,0 +1,969 @@
+Remove duplicated files to stop the linker from complaining about duplicate
+symbols
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sysapi_timer.c 2011-10-05 19:10:37.000000000 +0200
++++ /dev/null 2012-01-01 16:39:47.918907000 +0100
+@@ -1,212 +0,0 @@
+-/***********************************************************************
+- * $Id:: sysapi_timer.c 3394 2010-05-06 17:56:27Z usb10132 $
+- *
+- * Project: Time support functions
+- *
+- * Description:
+- * Implements the following functions required for the S1L API
+- * time_init
+- * time_reset
+- * time_start
+- * time_stop
+- * time_get
+- * time_get_rate
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only
+- * which provides customers with programming information regarding the
+- * products. This software is supplied "AS IS" without any warranties.
+- * NXP Semiconductors assumes no responsibility or liability for the
+- * use of the software, conveys no license or title under any patent,
+- * copyright, or mask work right to the product. NXP Semiconductors
+- * reserves the right to make changes in the software without
+- * notification. NXP Semiconductors also make no representation or
+- * warranty that such application will be suitable for the specified
+- * use without further testing or modification.
+- **********************************************************************/
+-
+-#include "s1l_sys_inf.h"
+-#include "lpc32xx_intc_driver.h"
+-#include "lpc32xx_timer_driver.h"
+-
+-static UNS_64 base_rate;
+-static INT_32 tdev = 0;
+-
+-/***********************************************************************
+- *
+- * Function: time_init
+- *
+- * Purpose: Initializes time system
+- *
+- * Processing: Initializes the system timer.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: 0 if the init failed, otherwise non-zero
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-INT_32 time_init(void)
+-{
+- TMR_PSCALE_SETUP_T pscale;
+-
+- /* Open timer driver */
+- if (tdev == 0)
+- {
+- tdev = timer_open((void *) TIMER_CNTR0, 0);
+- if (tdev != 0)
+- {
+- /* Use a prescale count to 100000 */
+- pscale.ps_tick_val = 100000;
+- pscale.ps_us_val = 0; /* Not needed when ps_tick_val != 0 */
+- timer_ioctl(tdev, TMR_SETUP_PSCALE, (INT_32) &pscale);
+-
+- /* Get timer clock rate */
+- base_rate = (UNS_64) timer_ioctl(tdev, TMR_GET_STATUS,
+- TMR_GET_CLOCK);
+- }
+- }
+-
+- return tdev;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_reset
+- *
+- * Purpose: Resets system timer
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_reset(void)
+-{
+- if (tdev != 0)
+- {
+- timer_ioctl(tdev, TMR_RESET, 1);
+- }
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_start
+- *
+- * Purpose: Starts system timer
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_start(void)
+-{
+- if (tdev != 0)
+- {
+- timer_ioctl(tdev, TMR_ENABLE, 1);
+- }
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_stop
+- *
+- * Purpose: Stops system timer
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_stop(void)
+-{
+- if (tdev != 0)
+- {
+- timer_ioctl(tdev, TMR_ENABLE, 0);
+- }
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get
+- *
+- * Purpose: Returns current system time value
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The number of ticks of the timer counter
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get(void)
+-{
+- TMR_COUNTS_T tcounts;
+- UNS_64 ticks = 0;
+-
+- if (tdev != 0)
+- {
+- timer_ioctl(tdev, TMR_GET_COUNTS, (INT_32) &tcounts);
+-
+- /* Compute number of timer ticks */
+- ticks = (UNS_64) tcounts.count_val * 100000;
+- ticks = ticks + (UNS_64) tcounts.ps_count_val;
+- }
+-
+- return ticks;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get_rate
+- *
+- * Purpose:
+- * Returns base tick rate (ticks per second) of the time counter
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The timer tick rate (in ticks per second)
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get_rate(void)
+-{
+- return base_rate;
+-}
+-
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sys_mmu_cmd_group.c 2011-10-05 19:10:37.000000000 +0200
++++ /dev/null 2012-01-01 16:39:47.918907000 +0100
+@@ -1,746 +0,0 @@
+-/***********************************************************************
+- * $Id:: sys_mmu_cmd_group.c 3430 2010-05-07 17:39:08Z usb10132 $
+- *
+- * Project: Command processor for peek, poke, dump, and fill
+- *
+- * Description:
+- * Processes commands from the command prompt
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only
+- * which provides customers with programming information regarding the
+- * products. This software is supplied "AS IS" without any warranties.
+- * NXP Semiconductors assumes no responsibility or liability for the
+- * use of the software, conveys no license or title under any patent,
+- * copyright, or mask work right to the product. NXP Semiconductors
+- * reserves the right to make changes in the software without
+- * notification. NXP Semiconductors also make no representation or
+- * warranty that such application will be suitable for the specified
+- * use without further testing or modification.
+- **********************************************************************/
+-
+-#include "lpc_arm922t_cp15_driver.h"
+-#include "lpc_string.h"
+-#include "startup.h"
+-#include "s1l_cmds.h"
+-#include "s1l_sys_inf.h"
+-
+-/* dcache command */
+-BOOL_32 cmd_dcache(void);
+-static UNS_32 cmd_dcache_plist[] =
+-{
+- (PARSE_TYPE_STR), /* The "dcache" command */
+- (PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_dcache_cmd =
+-{
+- (UNS_8 *) "dcache",
+- cmd_dcache,
+- (UNS_8 *) "Enables, disables, or flushes data cache",
+- (UNS_8 *) "dcache [0(disable), 1(enable), 2(flush)]",
+- cmd_dcache_plist,
+- NULL
+-};
+-
+-/* icache command */
+-BOOL_32 cmd_icache(void);
+-static UNS_32 cmd_icache_plist[] =
+-{
+- (PARSE_TYPE_STR), /* The "icache" command */
+- (PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_icache_cmd =
+-{
+- (UNS_8 *) "icache",
+- cmd_icache,
+- (UNS_8 *) "Enables or disables instruction cache",
+- (UNS_8 *) "icache [0(disable), 1(enable)]",
+- cmd_icache_plist,
+- NULL
+-};
+-
+-/* inval command */
+-BOOL_32 cmd_inval(void);
+-static UNS_32 cmd_inval_plist[] =
+-{
+- (PARSE_TYPE_STR | PARSE_TYPE_END) /* The "inval" command */
+-};
+-static CMD_ROUTE_T core_inval_cmd =
+-{
+- (UNS_8 *) "inval",
+- cmd_inval,
+- (UNS_8 *) "Flushes data cache and invalidates instruction cache",
+- (UNS_8 *) "inval",
+- cmd_inval_plist,
+- NULL
+-};
+-
+-/* mmuenab command */
+-BOOL_32 cmd_mmuenab(void);
+-static UNS_32 cmd_mmuenab_plist[] =
+-{
+- (PARSE_TYPE_STR), /* The "mmuenab" command */
+- (PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_mmuenab_cmd =
+-{
+- (UNS_8 *) "mmuenab",
+- cmd_mmuenab,
+- (UNS_8 *) "Enables or disables the MMU",
+- (UNS_8 *) "mmuenab [0(disable), 1(enable)]",
+- cmd_mmuenab_plist,
+- NULL
+-};
+-
+-/* map command */
+-BOOL_32 cmd_map(void);
+-static UNS_32 cmd_map_plist[] =
+-{
+- (PARSE_TYPE_STR), /* The "map" command */
+- (PARSE_TYPE_HEX),
+- (PARSE_TYPE_HEX),
+- (PARSE_TYPE_DEC),
+- (PARSE_TYPE_DEC | PARSE_TYPE_END),
+-};
+-static CMD_ROUTE_T core_map_cmd =
+-{
+- (UNS_8 *) "map",
+- cmd_map,
+- (UNS_8 *) "Maps a range of physical address sections to virtual addresses",
+- (UNS_8 *) "map [virt hex addr][phy hex addr][sections][0(uncached), 1(cached), 2(unmap)]",
+- cmd_map_plist,
+- NULL
+-};
+-
+-/* mmuinfo command */
+-static BOOL_32 cmd_mmuinfo(void);
+-static UNS_32 cmd_mmuinfo_plist[] =
+-{
+- (PARSE_TYPE_STR | PARSE_TYPE_END) /* The "mmuinfo" command */
+-};
+-static CMD_ROUTE_T core_mmuinfo_cmd =
+-{
+- (UNS_8 *) "mmuinfo",
+- cmd_mmuinfo,
+- (UNS_8 *) "Dumps page table and MMU info",
+- (UNS_8 *) "mmuinfo",
+- cmd_mmuinfo_plist,
+- NULL
+-};
+-
+-/* MMU group */
+-static GROUP_LIST_T mmu_group =
+-{
+- (UNS_8 *) "mmu", /* mmu group */
+- (UNS_8 *) "MMU command group",
+- NULL,
+- NULL
+-};
+-
+-static UNS_8 enabled_msg [] =" enabled";
+-static UNS_8 disabled_msg [] =" disabled";
+-static UNS_8 dcache_msg[] = "Data cache";
+-static UNS_8 icache_msg[] = "Instruction cache";
+-static UNS_8 pagetab_msg[] = "Page table at address: ";
+-static UNS_8 slist_msg[] = "Type Virt Phy fl Size";
+-static UNS_8 mmu_msg [] ="MMU";
+-static UNS_8 cpage_msg[] = "Coarse page:";
+-static UNS_8 fpage_msg[] = "Fine page :";
+-static UNS_8 sect_msg[] = "Section :";
+-static UNS_8 mbytes_msg[] = "M";
+-static UNS_8 map1_err_msg[] =
+- "Error : section addresses must be aligned on a 32-bit boundary";
+-static UNS_8 map2_err_msg[] =
+- "Error : Number of sections exceeds address range of device";
+-static UNS_8 phya_msg[] = "Virtual address ";
+-static UNS_8 mapped_msg[] = " mapped to physical address ";
+-static UNS_8 unmapped_msg[] = " unmapped from physical address ";
+-static UNS_8 cached_msg[] = " (cached)";
+-static UNS_8 inval_msg[] = " invalidated";
+-static UNS_8 caches_msg [] ="Caches";
+-static UNS_8 flushed_msg[] = " flushed";
+-
+-/***********************************************************************
+- *
+- * Function: show_section
+- *
+- * Purpose: Display section information
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters:
+- * mmu_reg : MMU settings for this section
+- * virt_addr : Starting virtual address for this section
+- * segs : Number of 1M segments for this section
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static void show_section(UNS_32 mmu_reg,
+- UNS_32 virt_addr,
+- UNS_32 segs)
+-{
+- UNS_8 straddr [16];
+- UNS_32 mmu_phy;
+-
+- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) !=
+- ARM922T_L1D_TYPE_FAULT)
+- {
+- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+- ARM922T_L1D_TYPE_CPAGE)
+- {
+- term_dat_out(cpage_msg);
+- }
+- else if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+- ARM922T_L1D_TYPE_FPAGE)
+- {
+- term_dat_out(fpage_msg);
+- }
+- else
+- {
+- term_dat_out(sect_msg);
+- }
+-
+- /* Compute virtual address */
+- str_makehex(straddr, virt_addr, 8);
+- term_dat_out(straddr);
+- term_dat_out((UNS_8 *) " ");
+-
+- /* Compute mapped physical address */
+- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+- ARM922T_L1D_TYPE_SECTION)
+- {
+- mmu_phy = mmu_reg & 0xFFF00000;
+- }
+- else
+- {
+- /* Don't compute addresses for non-sections */
+- mmu_phy = 0;
+- }
+- str_makehex(straddr, mmu_phy, 8);
+- term_dat_out(straddr);
+- term_dat_out((UNS_8 *) " ");
+-
+- /* MMU flags */
+- if ((mmu_reg & ARM922T_L1D_BUFFERABLE) != 0)
+- {
+- term_dat_out((UNS_8 *) "b");
+- }
+- else
+- {
+- term_dat_out((UNS_8 *) " ");
+- }
+- if ((mmu_reg & ARM922T_L1D_CACHEABLE) != 0)
+- {
+- term_dat_out((UNS_8 *) "c");
+- }
+- else
+- {
+- term_dat_out((UNS_8 *) " ");
+- }
+- term_dat_out((UNS_8 *) " ");
+-
+- /* Displays used megabytes */
+- str_makedec(straddr, segs);
+- term_dat_out(straddr);
+- term_dat_out_crlf(mbytes_msg);
+- }
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpinfo
+- *
+- * Purpose: Display MMU info
+- *
+- * Processing:
+- * Display the MMU information, including enable status, cache
+- * status, and page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpinfo(void)
+-{
+- UNS_32 segsz, last_mmu_reg, mmu_vrt, mmu_reg, mmu_vrtsav = 0, *pt;
+- UNS_32 mlast_mmu_reg, mmmu_reg;
+- int idx;
+- UNS_8 hexaddr [16];
+-
+- term_dat_out(mmu_msg);
+- if (cp15_mmu_enabled() == FALSE)
+- {
+- term_dat_out_crlf(disabled_msg);
+- }
+- else
+- {
+- term_dat_out_crlf(enabled_msg);
+-
+- /* Get MMU control register word */
+- mmu_reg = cp15_get_mmu_control_reg();
+-
+- /* Instruction cache status */
+- term_dat_out(icache_msg);
+- if ((mmu_reg & ARM922T_MMU_CONTROL_I) == 0)
+- {
+- term_dat_out_crlf(disabled_msg);
+- }
+- else
+- {
+- term_dat_out_crlf(enabled_msg);
+- }
+-
+- /* Data cache status */
+- term_dat_out(dcache_msg);
+- if ((mmu_reg & ARM922T_MMU_CONTROL_C) == 0)
+- {
+- term_dat_out_crlf(disabled_msg);
+- }
+- else
+- {
+- term_dat_out_crlf(enabled_msg);
+- }
+-
+- term_dat_out(pagetab_msg);
+- mmu_reg = (UNS_32) cp15_get_ttb();
+- str_makehex(hexaddr, mmu_reg, 8);
+- term_dat_out_crlf(hexaddr);
+- term_dat_out_crlf(slist_msg);
+-
+- /* Process MMU table - assume that the physical and
+- virtual locations of table are the same */
+- pt = (UNS_32 *) mmu_reg;
+- mmu_vrt = 0x0;
+- segsz = 0xFFFFFFFF;
+- last_mmu_reg = mlast_mmu_reg = 0xFFFFFFFF;
+- for (idx = 0; idx < 4096; idx++)
+- {
+- mmu_reg = *pt;
+- mmmu_reg = (mmu_reg & (ARM922T_L1D_TYPE_PG_SN_MASK |
+- ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE));
+- segsz = segsz + 1;
+-
+- if ((last_mmu_reg != 0xFFFFFFFF) &&
+- (mlast_mmu_reg != mmmu_reg))
+- {
+- show_section(last_mmu_reg, mmu_vrtsav, segsz);
+- segsz = 0;
+- }
+-
+- if (mlast_mmu_reg != mmmu_reg)
+- {
+- mmu_vrtsav = mmu_vrt;
+- last_mmu_reg = mmu_reg;
+- mlast_mmu_reg = mmmu_reg;
+- }
+-
+- pt++;
+- mmu_vrt += 0x00100000;
+- }
+- }
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpmap
+- *
+- * Purpose: Map a virtual address range to a physical range
+- *
+- * Processing:
+- * From the input addresses and number of sections, generate the
+- * appropriate entries in the page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpmap(UNS_32 vrt,
+- UNS_32 phy,
+- UNS_32 sections,
+- UNS_32 cache)
+-{
+- BOOL_32 processed = FALSE;
+- UNS_32 mmu_phy, mmu_vrt, tmp1 = 0, tmp2, *pt;
+- UNS_8 hexaddr [16];
+-
+- /* Verify address boundaries are sectional */
+- mmu_vrt = vrt & ~ARM922T_L2D_SN_BASE_MASK;
+- mmu_phy = phy & ~ARM922T_L2D_SN_BASE_MASK;
+- if ((mmu_vrt != 0) || (mmu_phy != 0))
+- {
+- term_dat_out_crlf(map1_err_msg);
+- }
+- else
+- {
+- /* Verify that address range and section count will not
+- exceed address range of device */
+- tmp1 = vrt >> 20;
+- tmp1 = (tmp1 + sections) - 1;
+- tmp2 = phy >> 20;
+- tmp2 = (tmp2 + sections) - 1;
+- if ((tmp1 < 4096) && (tmp2 < 4096))
+- {
+- /* Good address range and good section count */
+- processed = TRUE;
+- }
+- else
+- {
+- term_dat_out_crlf(map2_err_msg);
+- }
+- }
+-
+- /* Generate static part of MMU word */
+- if (cache == 0)
+- {
+- /* Section mapped with cache disabled */
+- tmp1 = ARM922T_L1D_TYPE_SECTION;
+- }
+- else if (cache == 1)
+- {
+- /* Section mapped with cache enabled */
+- tmp1 = (ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE |
+- ARM922T_L1D_TYPE_SECTION);
+- }
+- else if (cache == 2)
+- {
+- /* Section unmapped */
+- tmp1 = ARM922T_L1D_TYPE_FAULT;
+- }
+- tmp1 |= ARM922T_L1D_AP_ALL;
+-
+- /* Offset into page table for virtual address */
+- tmp2 = (vrt >> 20);
+- pt = cp15_get_ttb() + tmp2;
+-
+- /* Loop until all sections are complete */
+- while ((sections > 0) && (processed == TRUE))
+- {
+- /* Add in physical address */
+- tmp2 = tmp1 | (phy & ARM922T_L2D_SN_BASE_MASK);
+-
+- /* Save new section descriptor for virtual address */
+- *pt = tmp2;
+-
+- /* Output message shown the map */
+- term_dat_out(phya_msg);
+- str_makehex(hexaddr, phy, 8);
+- term_dat_out(hexaddr);
+- if (cache == 2)
+- {
+- term_dat_out(unmapped_msg);
+- }
+- else
+- {
+- term_dat_out(mapped_msg);
+- }
+- str_makehex(hexaddr, vrt, 8);
+- term_dat_out(hexaddr);
+- if (cache == 1)
+- {
+- term_dat_out(cached_msg);
+- }
+- term_dat_out_crlf((UNS_8 *) "");
+-
+- /* Next section and page table entry*/
+- phy += 0x00100000;
+- vrt += 0x00100000;
+- pt++;
+- sections--;
+- }
+-
+- return processed;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuinfo
+- *
+- * Purpose: Display MMU information
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 cmd_mmuinfo(void)
+-{
+- mmu_dumpinfo();
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_map
+- *
+- * Purpose: Map a physical address region to a virtual region
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_map(void)
+-{
+- UNS_32 phy, virt, sects, ce = 0;
+-
+- /* Get arguments */
+- virt = cmd_get_field_val(1);
+- phy = cmd_get_field_val(2);
+- sects = cmd_get_field_val(3);
+- ce = cmd_get_field_val(4);
+-
+- if (ce <= 2)
+- {
+- mmu_dumpmap(virt, phy, sects, ce);
+- }
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_inval
+- *
+- * Purpose: MMU cache flush and invalidate
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_inval(void)
+-{
+- dcache_flush();
+- icache_inval();
+- term_dat_out(caches_msg);
+- term_dat_out(inval_msg);
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_dcache
+- *
+- * Purpose: MMU data cache enable and disable
+- *
+- * Processing:
+- * If the value passed in the parser is 1, enable the data cache,
+- * otherwise disable the data cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_dcache(void)
+-{
+- UNS_32 cenable;
+- UNS_8 *ppar;
+-
+- /* Get argument */
+- cenable = cmd_get_field_val(1);
+-
+- switch (cenable)
+- {
+- case 0:
+- dcache_flush();
+- cp15_set_dcache(0);
+- ppar = disabled_msg;
+- break;
+-
+- case 1:
+- cp15_invalidate_cache();
+- cp15_set_dcache(1);
+- ppar = enabled_msg;
+- break;
+-
+- case 2:
+- default:
+- dcache_flush();
+- ppar = flushed_msg;
+- break;
+- }
+-
+- term_dat_out(dcache_msg);
+- term_dat_out_crlf(ppar);
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_icache
+- *
+- * Purpose: MMU instruction cache enable and disable
+- *
+- * Processing:
+- * If the value passed in the parser is 1, enable the instruction
+- * cache, otherwise disable the instruction cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_icache(void)
+-{
+- UNS_32 cenable;
+- UNS_8 *ppar;
+-
+- /* Get argument */
+- cenable = cmd_get_field_val(1);
+-
+- if (cenable == 1)
+- {
+- dcache_flush();
+- cp15_invalidate_cache();
+- cp15_set_icache(1);
+- ppar = enabled_msg;
+- }
+- else
+- {
+- cp15_set_icache(0);
+- ppar = disabled_msg;
+- }
+-
+- term_dat_out(icache_msg);
+- term_dat_out_crlf(ppar);
+-
+- return TRUE;
+-}
+-
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuenab
+- *
+- * Purpose: Enable or disable MMU
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_mmuenab(void)
+-{
+- UNS_8 *ppar;
+- UNS_32 cenable;
+-
+- term_dat_out_crlf((UNS_8 *) "Warning: Changing MMU status on "
+- " cached and buffered code can cause system crashes.");
+-
+- /* Get argument */
+- cenable = cmd_get_field_val(1);
+-
+- if (cenable == 1)
+- {
+- if ((cp15_get_mmu_control_reg() & ARM922T_MMU_CONTROL_C) != 0)
+- {
+- cp15_invalidate_cache();
+- }
+-
+- cp15_set_mmu(1);
+- ppar = enabled_msg;
+- }
+- else
+- {
+- cp15_dcache_flush();
+- cp15_write_buffer_flush();
+- cp15_invalidate_cache();
+- cp15_set_mmu(0);
+- ppar = disabled_msg;
+- }
+-
+- term_dat_out(mmu_msg);
+- term_dat_out_crlf(ppar);
+-
+- return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_cmd_group_init
+- *
+- * Purpose: Initialize MMU command group
+- *
+- * Processing:
+- * See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothin
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void mmu_cmd_group_init(void)
+-{
+- /* Add MMU group */
+- cmd_add_group(&mmu_group);
+-
+- /* Add commands to the MMU group */
+- cmd_add_new_command(&mmu_group, &core_dcache_cmd);
+- cmd_add_new_command(&mmu_group, &core_icache_cmd);
+- cmd_add_new_command(&mmu_group, &core_inval_cmd);
+- cmd_add_new_command(&mmu_group, &core_mmuenab_cmd);
+- cmd_add_new_command(&mmu_group, &core_map_cmd);
+- cmd_add_new_command(&mmu_group, &core_mmuinfo_cmd);
+-}