aboutsummaryrefslogtreecommitdiff
path: root/target/linux-experimental/Makefile.in
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux-experimental/Makefile.in')
-rw-r--r--target/linux-experimental/Makefile.in122
1 files changed, 61 insertions, 61 deletions
diff --git a/target/linux-experimental/Makefile.in b/target/linux-experimental/Makefile.in
index 6f37aa74c4..ab9a6135dd 100644
--- a/target/linux-experimental/Makefile.in
+++ b/target/linux-experimental/Makefile.in
@@ -9,13 +9,13 @@ ifneq ($(filter $(TARGETS),linux26),)
ifeq ($(LINUX_HEADERS_VERSION),)
# Version of Linux to download and then apply patches to
# XXX: andersee, i do not understand why we need this (BF)
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
# "))
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
+LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
# "))
-LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
+LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
# "))
-LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
+LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
# " ))
MKIMAGE:=$(BUILD_DIR)/mkimage
@@ -26,13 +26,13 @@ endif
LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
-else # ---------------------------------------------------
+else # ---------------------------------------------------
# Define DOWNLOAD_LINUX26_VERSION unless defined
ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),)
DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
else
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
# "))
endif
@@ -41,15 +41,15 @@ endif
ifeq ($(strip $(BR2_LINUX26_VERSION)),)
LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
else
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
+LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
# "))
endif
-endif # ---------------------------------------------------
+endif # ---------------------------------------------------
# Handle case when we want to build using an "rc" patch
# Example: to build 2.6.21-rc1 you need to:
-# * Download linux-2.6.20
+# * Download linux-2.6.20
# * Apply patch-2.6.21-rc1
LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
@@ -57,7 +57,7 @@ LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
LINUX26_BZCAT:=$(BZCAT)
# Linux kernel binary
-LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
+LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
# " ))
# Linux kernel configuration file
@@ -102,11 +102,11 @@ LINUX_DIR=$(LINUX26_DIR)
LINUX_KERNEL=$(LINUX26_KERNEL)
# kernel patches
-ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
+ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
# ")))
LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/
endif
-PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
+PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
# " ))
LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
@@ -120,24 +120,24 @@ $(LINUX26_KCONFIG):
echo "and install it as $(LINUX26_KCONFIG)"; \
echo ""; \
sleep 5; \
- fi;
+ fi
# Check if we have a release candidate.
-# This makes life complex
-# To build linux-2.6.21-rc2 you need to:
-# * Download linux.2.6.20.tar.bz2
-# * Download patch-2.6.21-rc2.bz2
-# I:E you have to download the *previous* major version
-
-ifneq ($(LINUX26_RC_PATCH),)
+# This makes life complex
+# To build linux-2.6.21-rc2 you need to:
+# * Download linux.2.6.20.tar.bz2
+# * Download patch-2.6.21-rc2.bz2
+# I:E you have to download the *previous* major version
+
+ifneq ($(LINUX26_RC_PATCH),)
# We have a "release candidate"
LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH)
# Create rule to download the patch
$(LINUX26_RC_PATCH_SOURCE):
mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/
- $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
-# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
+ $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
+# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
else
# We have a vanilla style linux kernel
LINUX26_RC_PATCH_SOURCE:=
@@ -155,7 +155,7 @@ ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
# Rename the dir from the downloaded version to the AFTER patch version
mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
endif
-ifneq ($(LINUX26_RC_PATCH),)
+ifneq ($(LINUX26_RC_PATCH),)
-(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1)
endif
-(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux)
@@ -168,7 +168,7 @@ $(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
touch $@
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
+$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
-ls -l $(LINUX26_DIR)/.patched
-ls -l $(LINUX26_KCONFIG)
-ls -l $(LINUX26_DIR)/.configured
@@ -194,7 +194,7 @@ endif
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h
touch $@
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
+$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
touch $@
@@ -211,8 +211,8 @@ $(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux
#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+# Rule can be enabled by setting
+# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
#
$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
@@ -220,33 +220,33 @@ $(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
touch -c $@
#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
-# LINUX26_FORMAT:= vmlinux
+# Rule can be enabled by setting
+# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
+# LINUX26_FORMAT:= vmlinux
-$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
+$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL)
cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL)
- mkdir -p $(TARGET_DIR)/boot/
+ mkdir -p $(TARGET_DIR)/boot/
cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config
- cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
- cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
+ cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
+ cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
$(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux
${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin
-$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
- cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
-
+$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
+ cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
+
-$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
+$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz
- $(MKIMAGE) -A $(ARCH) \
- -O linux \
- -C gzip \
- -a 0x20008000 \
- -e 0x20008000 \
- -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
+ $(MKIMAGE) -A $(ARCH) \
+ -O linux \
+ -C gzip \
+ -a 0x20008000 \
+ -e 0x20008000 \
+ -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
$(LINUX26_DIR)/uImage
rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz
#-----------------------------------------------------------------------------------
@@ -296,23 +296,23 @@ linux26-dirclean:
rm -rf $(LINUX26_DIR)
linux-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
+ cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
linux-test:
- @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
- @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
- @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
- @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
- @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
- @echo "LINUX26_VERSION" $(LINUX26_VERSION)
- @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
- @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
- @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
- @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
- @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
- @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
- @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)
+ @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
+ @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
+ @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
+ @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
+ @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
+ @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
+ @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
+ @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
+ @echo "LINUX26_VERSION" $(LINUX26_VERSION)
+ @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
+ @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
+ @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
+ @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
+ @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
+ @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
+ @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)