aboutsummaryrefslogtreecommitdiff
path: root/board/raspberrypi
Commit message (Collapse)AuthorAgeFilesLines
* configs/raspberrypi4_64: new defconfigGravatar Arthur Courtel2019-12-081-0/+30
| | | | | | | This configuration builds a 64bit image for RaspberryPi 4. Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi: change deprecated pi3-miniuart-bt option to miniuart-btGravatar Arthur Courtel2019-12-082-5/+5
| | | | | | | | | | | The pi3-minuart-bt Device Tree overlay has been renamed to miniuart-bt, as it is useful/usable for other platforms than the RPi3. So we use this DT overlay and rename the --add-pi3-miniuart-bt-overlay option to --add-miniuart-bt-overlay accordingly. Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi3_64_defconfig: use pi3-miniuart-bt device tree overlayGravatar Peter Seiderer2019-11-091-9/+0
| | | | | | | | Use the pi3-miniuart-bt device tree overlay (as the 32bit raspberrypi3 defconfig) instead of the enable_uart option. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* board/raspberrypi/post-image.sh: pass an empty rootpath to genimageGravatar Carlos Santos2019-10-271-2/+10
| | | | | | | | | | genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root so passing TARGET_DIR would be a waste of time and disk space. We don't rely on genimage to build the rootfs image, just to insert a pre-built one in the disk image. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi0: use dedicated rpi0 dts fileGravatar Peter Korsgaard2019-09-151-1/+1
| | | | | | | | | | Since the bump to the 20190819 snapshot there is now a dedicated dts file for the rpi0, so use that rather than the rpi-b-plus one: https://github.com/raspberrypi/linux/commit/bd1336d8b6544ce5c7ddb197c3d8c539082dac66 Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi0w: fix dts file name after kernel bumpGravatar Peter Korsgaard2019-09-151-1/+1
| | | | | | | | | | | | | | | | Fixes #12816 Commit 42d22f3bdba41da ({configs/raspberrypi,package/rpi-firmware}: bump kernel/firmware to 20190819 version) updated the kernel version but failed to take into consideration that the rpi0w dts file has been renamed: https://github.com/raspberrypi/linux/commit/6f91b5dbfdb62a434571a73f2dc15181963e3bea Fix it by renaming the dts/dtb file referenced from the kernel build and genimage. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* board/raspberrypi: add support for the new pi4Gravatar Michael Cullen2019-08-032-1/+37
| | | | | | | | This is based on the pi3 defconfig. There is currently no 64-bit support since the upstream kernel does not build in this configuration. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Fix rasberry Pi 64bit firmware overlay inclusionGravatar Matt Flax2019-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the inclusion of the Pi's overlays. Previously the overlays were not included in the genimage configuration. This patch ensures overlays are included in the sdcard (when enabled) by defaulting to the inclusion of an empty output/images/rpi-firmware/overlays directory in genimage cfg. The Pi's overlays are built with the following config variables: BR2_PACKAGE_RPI_FIRMWARE=y BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image modules dtbs" After building, the dtbo files are present in the output/images/rpi-firmware/overlays directory but not added to the sdcard because they are missing from the genimage cfg file. Signed-off-by: Matt Flax <flatmax@flatmax.org> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> [Arnout: fix indentation, and add comment explaining why an empty directory is created.] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* board/raspberrypi: update firmware option to use 64-bit modeGravatar J. Tang2018-06-301-2/+2
| | | | | | | | | | As per latest Raspberry Pi firmware documentation, the option 'arm_control' has been deprecated in favor of 'arm_64bit'. Fixes https://bugs.busybox.net/show_bug.cgi?id=11111. Signed-off-by: Jason Tang <tang@jtang.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi3_64_defconfig: add support for rpi3b+Gravatar Martin Bark2018-05-201-0/+1
| | | | | | | The kernel now includes the rpi3b+ device tree for aarch64 Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* board/raspberrypi: add support for rpi3 b+Gravatar Martin Bark2018-04-062-1/+3
| | | | | Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi0w_defconfig: new defconfig for Raspberry Pi Zero WGravatar Yves Deweerdt2018-03-312-1/+31
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal raspberrypi0_defconfig. However, then you don't have support for the Bluetooth out-of-the-box, which makes using a W a bit pointless. Therefore, create a separate defconfig for the W. It is a copy of raspberrypi0_defconfig with the following changes: - Add DT overlays (from rpi-firmware) to support Bluetooth. - Pass --add-pi3-miniuart-bt-overlay to post-image.sh. Since there is now a separate raspberrypi0w_defconfig, the W support can be removed from raspberrypi0_defconfig. Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com> [Arnout: - Bump to same kernel version as raspberrypi0. - Remove redundant comment. - Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y. - Improve commit log. - Refresh .gitlab-ci.yml. ] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* raspberrypi: post-image.sh fix gpu_mem optionGravatar Gaël PORTAY2017-10-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | The gpu_mem option is not using the proper option argument which causes sed to fail. + case "${arg}" in + gpu_mem=ome/gportay/output-rpi3-qtwe/images + sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt sed: -e expression #1, char 8: extra characters after command + case "${arg}" in + gpu_mem=ome/gportay/output-rpi3-qtwe/images + sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt sed: -e expression #1, char 8: extra characters after command The issue comes from the use of $1 instead of $arg to extract the gpu_mem value. $1 is the $(BINARIES_DIR) which leads to a sed expression error. Also, it adds the error flag to the shell script to prevent from such situation and terminate the build in error. Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi: post-image.sh add new gpu_mem optionGravatar Gaël PORTAY2017-09-271-1/+6
| | | | | | | | The amount of GPU memory can be set using the new option --gpu_mem_XXX (where XXX is the total amount of memory available on the board). Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* board/raspberrypi/post-image.sh: add multi arg supportGravatar Erik Stromdahl2017-09-271-19/+23
| | | | | | | | | Add possibility to supply multiple arguments to post-image.sh Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [Arnout: indent esac, suggested by Gaël PORTAY] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* configs: add raspberrypi3 64bits defconfigGravatar Gaël PORTAY2017-05-042-0/+51
| | | | | | | | | | | | This configuration builds a 64bit image for RaspberryPi 3. The size of the ext4 filesystem has to be extended to fit the large amount (~60MB) of kernel modules enabled in the defconfig. [Peter: drop gcc version selection / glibc, explain ext4 size requirement] Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/raspberrypi3_defconfig: add raspberry pi 3 compute module supportGravatar Martin Bark2017-03-051-0/+1
| | | | | Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/raspberrypi0_defconfig: add raspberry pi zero w supportGravatar Martin Bark2017-03-051-0/+1
| | | | | Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board: raspberrypi: mention the Zero model in readme.txtGravatar Baruch Siach2017-01-261-0/+4
| | | | | | | | Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board: raspberrypi: don't generate a marked kernelGravatar Baruch Siach2017-01-262-10/+2
| | | | | | | | | We no longer use the marked kernel. Cc: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board: raspberrypi: use regular kernel imageGravatar Baruch Siach2017-01-264-4/+4
| | | | | | | | | | | | | | | Since release 4.4 a kernel without a trailer is assumed to be device tree capable. Since our Raspberry Pi defconfigs all use the newer firmware we can just use the regular kernel image. https://www.raspberrypi.org/documentation/configuration/device-tree.md Tested on Raspberry Pi 3. Cc: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* raspberrypi3: fix serial console (load pi3-miniuart-bt overlay)Gravatar Peter Seiderer2016-09-183-1/+21
| | | | | | | | | | - enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig - add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg - enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request - add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/raspberrypi/post-build.sh: only tweak /etc/inittab if availableGravatar Peter Korsgaard2016-08-261-2/+4
| | | | | | | | | As pointed out in bug #9161, we don't always have an inittab file (if systemd or no init is used), so the post build script should only try to tweak it if present. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi0: new boardGravatar Yann E. MORIN2016-05-081-0/+30
| | | | | | | | | | | | Add support for the rpi-0, which is basically a rpi (model A+) in a smaller form-factor. This one does not have an ethernet port, so we just remove it from the configuration (or we could use the existing rasbperrypi_defconfig and suffer from a longer boot time because of the waiting for eth0). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add Raspberry Pi 3 defconfigGravatar Ubaldo Porcheddu2016-04-252-2/+38
| | | | | | | | | So far identical to the rpi2 one except for the dts file as the SW runs in 32bit mode. [Peter: extend commit message] Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* raspberrypi, raspberrypi2: document the two consoles (UART+HDMI)Gravatar Luca Ceresoli2016-04-191-1/+3
| | | | | | | | | | | | | The defconfigs for the Raspberry Pi boards start a console on HDMI in addition to the classic one on UART. Document this feature in the readme. Cc: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi, raspberrypi2: add a serial consoleGravatar Luca Ceresoli2016-04-181-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2 instantiate a console on tty1, which appears on HDMI. Add a console on the serial port (ttyAMA0) to be more consistent with other defconfigs and provide a better out-of-the-box experience to users used to have a serial console from Buildroot defconfigs. This requires three changes: 1. have two 'console=' entries in the kernel command line: tty1, then ttyAMA0; 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts a getty on the last console= passed to the kernel, ttyAMA0; 3. add a new getty on tty1 to the generated inittab. Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT entirely from the defconfigs, since "console" is the default value. Step 3 requires a post-build script since the Buildroot makefiles can configure only one console. Note: instead of simply adding a new getty on ttyAMA0 (which would work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to instantiate a console on UART, then adds back tty1 via post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment where we instantiate an HDMI console, then instantiate a really-serial console on another line. The result is these two inittab lines: console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console Cc: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/raspberrypi: add dtb for compute moduleGravatar Gustavo Zacarias2016-02-011-0/+1
| | | | | | [Peter: describe what 'CM' stands for, update comment] Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/raspberrypi*: update them to use genimageGravatar Gustavo Zacarias2015-12-314-93/+100
| | | | | | | | | | | Update the raspberrypi and raspberrypi2 configs to use genimage directly to build the image. Update the documentation to reflect this, and drop the volatile rootfs option since it doesn't make much sense and it's not easily integrated with the genimage configurations. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi: update instructionsGravatar Yann E. MORIN2015-06-301-26/+22
| | | | | | | | | | Now that we have a sanitised set of defconfig files, and we no longer support non-DT setups, update and simplify the board readme file. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/raspberrypi: update the DT-enabled configGravatar Yann E. MORIN2015-06-301-204/+0
| | | | | | | | | | | | | | | | | | Update to the latest stable kernel version; build an in-tree DTB; use a in-tree defconfig; enable C++ (to match what we have in the non-DT variant); do not install DTB overlays (this minimalist config does not make use of them). Generate the DTBs for both the "original" variant (A and B) and the "Plus" variant (A+ and B+). Drop our custom linux defconfig file now we use an in-tree one. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/raspberrypi: document RPi-2 defconfigGravatar Baruch Siach2015-04-071-0/+4
| | | | | | | | | Document the correct defconfig for ARMv7 based RPi-2. Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/raspberrypi: readme: add a missing wordGravatar Baruch Siach2015-04-071-1/+1
| | | | | | | Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi: update readme with RPi-2 specificsGravatar Yann E. MORIN2015-03-081-8/+8
| | | | | | | | | | | | The RPi-2 has its own DTB, so document it in the list of generated files. Also, not all DTBs need to be present on the boot partition, so add a comment that identifies which should be copied for each model. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi: update instructions for Raspberry Pi 2Gravatar Yann E. MORIN2015-02-261-3/+8
| | | | | | | | | | | | The instructions for the Raspberry Pi 2 (aka model B2) are the same as the ones for the Raspberry Pi, so: - state so in the existing readme - create a symlink raspberrypi2 -> raspberrypi Also fix typo in spelling of "Raspberry Pi" (two words, not one). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* boards/raspberrypi: fix rootfs.tar path in readmeGravatar Vivien Didelot2015-01-251-1/+1
| | | | | | | | The rootfs.tar file is located under ./output/images/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi: update readme with Device Tree instructionsGravatar Yann E. MORIN2015-01-101-4/+27
| | | | | Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add a DT-enabled Raspberry Pi defconfigGravatar Yann E. MORIN2015-01-101-0/+204
| | | | | | | | | | | | | | | | | | | | | | | This is an example of a Device-Tree-enabled Raspberry Pi defconfig. We have to use a 3.18-based kernel for that, but there are a few limitations: - we can not use the minimalist RPi defconfig bundled with the kernel, namely bcmrpi_quick_defconfig, because it is not DT-enabled, and sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for CONFIG_PHYS_OFFSET, as it as no default for the bcm familly; - most importantly, the rpi-3.18.y branch is constantly rebased, so there is no guarantee that the sha1 I use today will still be usable in the long term. Using the name of hte branch is not better either. So, we bundle our own DT-enabled linux defconfig that is based on bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the Device TRee enabled. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* boards/raspberrypi: don't document non-existent filesGravatar Yann E. MORIN2015-01-101-2/+0
| | | | | | | | | | | Those files were previously installed, but that's no longer the case since we select in the menuconfig which version of the bootloader we install. [Thomas: fix minor typo in commit log.] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi: tweak readmeGravatar Simon Dawson2014-01-151-3/+2
| | | | | | | | Make the readme.txt for the raspberrypi board less misleading regarding the kernel image file name. Signed-off-by: Simon Dawson <spdawson@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: rename rpi_defconfig for consistencyGravatar mathieu benoit2013-11-101-4/+4
| | | | | | | | | | | | | | | | | | We name all of our boards and defconfig files based on the boards fullname, not a nickname or a shortname. 'rpi' is short for Raspberry Pi, so name all our Raspberry Pi ressource with 'raspberrypi' instead of 'rpi'. This should also help Buildroot-newcomers to recognise Raspberry Pi related files (defconfig and board doc). Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com> [yann.morin.1998@free.fr: reverse the rename] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ryan Barnett <rjbarnet@rockwellcollins.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* rpi: improve documentationGravatar mathieu benoit2013-11-061-83/+84
| | | | | | | | Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com> [yann.morin.1998@free.fr: further improvements for readability and completeness] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: add RaspberryPi defconfigGravatar Maxime Hadjinlian2013-03-261-0/+127
This is a default configuration for the RaspberryPi, tested and functional. The kernel used is the one developped by the RaspberryPi foundation as it's not fully supported currently in mainline kernel. The configuration used for the kernel is the default bcmrpi. For more info, please find board/raspberrypi/readme.txt [Peter: minor README tweaks, rename to readme.txt] Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> [yann.morin.1998@free.fr: use correct kernel headers, update kernel cset] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>