aboutsummaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* zedboard: Switch to U-Boot 2015.07Gravatar Jan Viktorin2015-07-221-3/+2
| | | | | | | | The U-Boot v2015.07 is required for successful out-of-the-box build for common Xilinx Zynq boards (including Zedboard). Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board: add support for Xilinx zc706Gravatar Jordi Montagne2015-07-201-0/+27
| | | | | | | | | | | | | | | This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq (xc7z045). This support is based on Avnet Zedboard defconfig/readme. [Thomas: - minor fixes in the readme.txt - rename defconfig from zc706_defconfig to xilinx_zc706_defconfig.] Signed-off-by: Jordi Montagne <jordi.montagne66@gmail.com> Tested-by: Jean Burgat <jeanburgat33@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* zedboard: Patch default U-Boot environment for zedboardGravatar Jan Viktorin2015-07-181-0/+1
| | | | | | | | | | | | | | This patch changes the U-Boot's default environment to boot Zedboard out-of-the-box from SD card. The sdboot procedure tries to load a file system.bit into the Zynq's PL (only if it exists). It is also possible to alter the booting by an uEnv.txt file located on your SD card. The uEnv.txt is a plain text file with <key>=<value> pairs one per line. Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* zedboard: Generate BOOT.BIN automaticallyGravatar Jan Viktorin2015-07-181-4/+4
| | | | | | | | | | The U-Boot v2015.07 builds working SPL without a manual intervention. The BOOT.BIN is generated from the standard SPL so no BR2_TARGET_UBOOT_SPL_NAME redefinition is needed. The SPL requires the u-boot-dtb.img file to boot properly. Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/wandboard: add a genimage configGravatar Vivien Didelot2015-07-131-0/+2
| | | | | | | | | | | | | | | | | | This patch adds a genimage config file and a post-image script for the Wandboard, to generate a medium image "sdcard.img", ready to be booted. The image contains the layout explained in the board readme.txt file: U-Boot, its environment, and an Ext2 rootfs partition. The defconfig has been slightly changed to enable this feature. Also lighten the readme file since the config file is documented and simpler. Tested on a Wandboard Solo. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> [Arnout: change the name of the tmp dir, and remove it before using it.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add altera_socdk_defconfig for Altera Cyclone 5 Development BoardGravatar Charles Manning2015-07-132-1/+38
| | | | | | | | | | | | | | | This is largely the same as altera_sockit_defconfig. It uses a fresher Linux and u-boot than SocKit. It also speeds the serial port up to 115200. The post-image script is generalized by adding BR2_ROOTFS_POST_SCRIPT_ARGS and moving it up the altera directory. Similarly, the readme is moved up and made more generic. Signed-off-by: Charles Manning <cdhmanning@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* qmx6_defconfig: bump version to 3.10.53_1.1.0Gravatar Gary Bisson2015-07-111-4/+4
| | | | | Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* freescale_imx6*_defconfig: bump version to 3.10.53-1.1.0 GAGravatar Gary Bisson2015-07-115-17/+14
| | | | | Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/boundarydevices: rework and update u-boot scriptsGravatar Gary Bisson2015-07-111-0/+1
| | | | | | | | | | | | | | Those scripts are executed by u-boot in order to detect the hardware configuration (board, displays etc...), configure the bootargs and device tree accordingly or update the bootloader located in NOR flash. This update is necessary due to the kernel bump to version 3.10.53. The rework consists of replacing the binaries by their text file equivalent and generate the binaries from the post-build.sh script. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* nitrogen6x_defconfig: bump version to 3.10.53_1.1.1_gaGravatar Gary Bisson2015-07-111-5/+5
| | | | | | | Also update the dtb files to be generated. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board: add support for WarPboardGravatar Arthur LAMBERT2015-07-041-0/+42
| | | | | | | | | | | | | | | | | | | | | This is a set of patch to add support for warpboard (Freescale board based on imx6sl) The patch contains : - defconfig for warpboard - linux patches from Fabio Estevam to fix device tree due to last change on warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which use incorrect hci protocol - specific firmware file for warpboard bluetooth nvram : brcmfmac4330-sdio.txt Origin of nvram config file for wifi : https://github.com/Freescale/meta-fsl-arm-extra [Thomas: misc rewording/improvements in the README file.] Signed-off-by: Arthur LAMBERT <arthur@dreem.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/acmesystems_aria_g25: new configsGravatar Gustavo Zacarias2015-07-042-0/+46
| | | | | Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/olimex_a20_olinuxino_micro: new boardGravatar Luca Ceresoli2015-07-021-0/+46
| | | | | | | | Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most of the A20-OLinuXino-Lime files. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* olimex_a20_olinuxino_lime: rename board dir to remove _lime suffixGravatar Luca Ceresoli2015-06-302-4/+4
| | | | | | | | | | | The files in board/olimex/a20_olinuxino_lime/ work with minimal or no modifications for the Olimex A20-OLinuXino-Micro board, whose support is going to be added in a later commit. Rename the directory to clarify it's not restricted to the Lime anymore. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: rename atmel_xplained_defconfigGravatar Alexandre Belloni2015-06-301-0/+0
| | | | | | | | | | For consistency, rename atmel_xplained_defconfig to atmel_sama5d3_xplained_mmc_defconfig as this configuration supports booting the sama5d3 Xplained with an MMC card (as opposed to the NAND flash). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel sama5d3 XplainedGravatar Alexandre Belloni2015-06-301-0/+29
| | | | | Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel sama5d4 Xplained UltraGravatar Alexandre Belloni2015-06-301-0/+33
| | | | | Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel sama5d4ekGravatar Alexandre Belloni2015-06-301-0/+33
| | | | | Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel sama5d3xekGravatar Alexandre Belloni2015-06-301-0/+29
| | | | | | | | | | | | | | This supports: - sama5d31ek - sama5d33ek - sama5d34ek - sama5d35ek - sama5d36ek with or without the PDA4 or PDA7 screens. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel at91sam9x5ekGravatar Alexandre Belloni2015-06-301-0/+25
| | | | | | | | | | | | This supports: - at91sam9g15ek - at91sam9g25ek - at91sam9g35ek - at91sam9x25ek - at91sam9x35ek Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: add defconfig for Atmel at91sam9rlekGravatar Alexandre Belloni2015-06-301-0/+24
| | | | | Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: update at91sam9g45m10ek defconfigGravatar Alexandre Belloni2015-06-301-5/+20
| | | | | | | Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* config/raspberrypi: rename our non-DT defconfig fileGravatar Yann E. MORIN2015-06-301-0/+0
| | | | | | | | | | | Since we no longer have a non-DT defconfig, and we no longer want to advertise such a possibility (non-DT is being phased out), just rename the DT-enabled defconfig file. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* config/raspberrypi: remove non-DT defconfigGravatar Yann E. MORIN2015-06-301-21/+0
| | | | | | | | | | | The RPi is slowly but surely dropping support for booting without a DTB, so just ditch our old defconfig now that we have up-to-date DT-enabled defconfigs for all RPi models (save for the compute module). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/raspberrypi2: update our defconfigGravatar Yann E. MORIN2015-06-301-5/+11
| | | | | | | | | Update to the latest stable kernel version (4.0.y); build an in-tree DTB. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/raspberrypi: update the DT-enabled configGravatar Yann E. MORIN2015-06-301-7/+14
| | | | | | | | | | | | | | | | | | Update to the latest stable kernel version; build an in-tree DTB; use a in-tree defconfig; enable C++ (to match what we have in the non-DT variant); do not install DTB overlays (this minimalist config does not make use of them). Generate the DTBs for both the "original" variant (A and B) and the "Plus" variant (A+ and B+). Drop our custom linux defconfig file now we use an in-tree one. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Floris Bos <bos@je-eigen-domein.nl> Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/olimex_a20_olinuxino_lime_mali_defconfig: new boardGravatar Francois Perrad2015-06-281-0/+50
| | | | | | | | | | This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/olimex_a20_olinuxino_lime: new boardGravatar Francois Perrad2015-06-281-0/+45
| | | | | | | | | This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 4.x mainline kernel. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* qemu/configs: update to latest kernelGravatar Gustavo Zacarias2015-06-2219-89/+89
| | | | | | | | Update most of the configs to the latest kernel version (4.1) except for arm-nuri which is stuck. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* zedboard: Upgrade to Linux xilinx-v2015.1 (3.18)Gravatar Jan Viktorin2015-06-181-1/+1
| | | | | Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Merge branch 'next'Gravatar Peter Korsgaard2015-06-012-4/+35
|\ | | | | | | Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
| * configs/riotboard: bump kernel to version 4.0Gravatar Nikolay Dimitrov2015-05-181-3/+3
| | | | | | | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
| * board: add support for VIA VAB-820/AMOS-820Gravatar Gergely Imreh2015-05-071-0/+31
| | | | | | | | | | | | | | | | The VIA VAB-820 board (and the AMOS-820 system built around it) is based on Freescale i.MX6 for embedded and industrial computing. Signed-off-by: Gergely Imreh <imrehg@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
| * configs/riotboard: bump u-boot to version 2015.04Gravatar Nikolay Dimitrov2015-05-071-1/+1
| | | | | | | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* | fs/jffs2: Fix mkfs.jffs2 --pagesize parameter usageGravatar Michał Leśniewski2015-05-223-3/+3
|/ | | | | | | | | | | | | | | | | | | | Fixes #8186 Mkfs.jffs2 accepts a --pagesize parameter, which allows specifying the size of the virtual memory page size of the target machine, where the image will be used. (This is the value of the PAGE_SIZE macro in Linux.) In most cases the parameter doesn't need to be set as the default value of 4 kB is usually correct. The parameter was used incorrectly in Buildroot -- it was set to the page size of flash memory chip -- this commit fixes this problem. Now the --pagesize parameter is not used at all (unless the user explicitly chooses to use a custom value during configuration). All existing defconfigs were corrected to match the new configuration variable names. [Peter: reword, add Config.in.legacy handling] Signed-off-by: Michał Leśniewski <mlesniew@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* sh4: fix toolchain creationGravatar Waldemar Brodkorb2015-05-031-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux kernel does force compile with -m4-nofpu, which is only available when building a multilib toolchain. The interesting part here is, that buildroot use --disable-multilib for gcc configure, but enables --with-multilib-list=m4,m4-nofpu in the default configuration for Qemu targeting r2d emulation. This results in a toolchain, which can be used for the kernel and for userland without creating a multilib toolchain with different kinds of libgcc version. In the multilib case there would be subdirectories created (!m4 and m4-nofpu). As buildroot uses a short version of toolchain creation, a multilib enabled gcc build fails when creating libgcc. So the best solution is to just keep multilib disabled, but always add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen. Tested with sh4/sh4a toolchain build and qemu defconfig with gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc. Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (ARM and SH4 uClibc toolchain builds)
* qmx6_defconfig: updateGravatar Jérôme Pouiller2015-05-011-4/+21
| | | | | | | | | | | | | - Update kernel - Add u-boot configuration - 6q_bootscript.txt is no more needed by new version of u-boot Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> [build test only] Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* freescale_imx6*_defconfig: bump kernel to 3.10.17_1.0.1_gaGravatar Jérôme Pouiller2015-05-013-3/+6
| | | | | | Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* nitrogen6x_defconfig: bump kernel to 3.10.17_1.0.1_gaGravatar Jérôme Pouiller2015-05-011-1/+2
| | | | | | | Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi: bump raspberrypi_dt_defconfig kernelGravatar Frank Hunleth2015-05-011-2/+2
| | | | | | | | | This brings the raspberrypi_dt_defconfig up to the same kernel used by the raspberrypi2_defconfig. Also changed the git URL to use HTTP for consistency. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi2: switch Linux kernel to rpi-3.18.yGravatar Frank Hunleth2015-05-011-4/+4
| | | | | | | | | | | | | | | | This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch back to the 3.18 branch. This provides a couple of advantages: 1. mmc0 works again. Floris Bos found out that this was due to using the precompiled DTB files from rpi-firmware. These DTBs were built using 3.18. 2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y according to popcornmix. See https://github.com/raspberrypi/linux/issues/915. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Reviewed-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: drop redundant IPv6 optionGravatar Gustavo Zacarias2015-04-221-1/+0
| | | | | | | | | Drop the buildroot toolchain IPv6 option from the only config that's got it since it's now a non-option. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* altera: update use of BR2_TARGET_UBOOT_PATCH_DIRGravatar Frank Hunleth2015-04-191-1/+1
| | | | | | | | Use BR2_TARGET_UBOOT_PATCH now that BR2_TARGET_UBOOT_PATCH_DIR is deprecated. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/riotboard: bump kernel to version 3.19.3Gravatar Nikolay Dimitrov2015-04-181-2/+2
| | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update ppc mpc8544dsGravatar Gustavo Zacarias2015-04-161-4/+4
| | | | | | | Switch to kernel 4.0. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update ppc g3beigeGravatar Gustavo Zacarias2015-04-161-5/+5
| | | | | | | | Switch to kernel 4.0. Simplify kernel config to reduce bloat. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update nuri to latest 3.10.x kernelGravatar Gustavo Zacarias2015-04-161-2/+2
| | | | | Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update x86_64Gravatar Gustavo Zacarias2015-04-161-5/+5
| | | | | | | | | Switch to kernel 4.0. Enable evdev for extra X testing. Drop bloat/redundant options. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update x86Gravatar Gustavo Zacarias2015-04-161-5/+5
| | | | | | | | | Switch to kernel 4.0. Enable evdev for extra X testing. Drop bloat/redundant options. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu: update ppc virtex ml507Gravatar Gustavo Zacarias2015-04-161-5/+6
| | | | | | | | | | Switch to kernel 4.0. Use a custom kernel config to avoid the caveat of a huge debug-enabled one. And also reduce defconfig options to avoid bloat. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>