aboutsummaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=yGravatar Peter Korsgaard2016-04-258-12/+0
| | | | | | | | Commit 7f1f9185e (system: default to devtmpfs for /dev) changed our default for /dev handling, but didn't remove the explicit selection of devtmpfs from a number of defconfigs. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board: add support for Hardkernel ODROID-C2 BoardGravatar Brian Kim2016-04-231-0/+35
| | | | | | | | | | | | The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world. http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438 [Peter: fix typos, drop neon/C++ settings, use git hash for Linux/U-Boot] Signed-off-by: Brian Kim <brian.kim@hardkernel.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* raspberrypi2_defconfig: bump to kernel version 4.4.7Gravatar Peter Seiderer2016-04-231-3/+3
| | | | | Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi_defconfig: bump to kernel version 4.4.7Gravatar Peter Seiderer2016-04-231-3/+3
| | | | | Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board: rename ts to technologicGravatar Damien Riegel2016-04-211-2/+2
| | | | | | | | | | | | Other projects, such as Linux [1] and U-Boot [2], use "technologic" for this manufacturer. To be more consistent across all of them, rename the board/ts folder to board/technologic. [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/vendor-prefixes.txt [2] http://git.denx.de/?p=u-boot.git;a=tree;f=board/technologic;hb=HEAD Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: xplained boards: bump to linux4sam_5.3Gravatar Ludovic Desroches2016-04-215-15/+15
| | | | | | | | Bump defconfigs relative to Xplained boards to linux4sam_5.3 release. It involves to use at91bootstrap v3.8.5. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: sama5d2 has vfpv4-d16Gravatar Ludovic Desroches2016-04-191-1/+0
| | | | | | | The datasheet indicates vfpv4 but it stands for vfpv4-d16 not vfpv4-32. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/minnowboard-max: Add a X-based graphical defconfigGravatar Ezequiel García2016-04-181-0/+75
| | | | | | | | | | | | | | | | | | | | | | This commit adds a new defconfig to build a X-based graphical system for the Minnowboard MAX board. * The 'openbox' windows manager is chosen because it's simple and lightweigth. * Basic X apps are enabled (such as xrandr, xterm), so we can at least get a console and change video mode. * ALSA default configuration is provided, so HDMI audio works out-of-the-box. * OpenGL is supported. Tested on Minnoboard Turot (which is Minnowboard Max compatible). [Peter: drop unneeded/specific toolchain config options] Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/minnowboard: Unify Minnowboard and Minnowboard MAX boardsGravatar Ezequiel García2016-04-182-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given Minnowboard and Minnowboard MAX boards are very similar, it's desirable to unify the support for them. This commit does the following: 1) Remove Minnowboard MAX's genimage.cfg, post-build.sh and post-image.sh. These are identical to Minnowboard's. 2) Move Minnowboard MAX's linux config, and rename it. It would be lovely to have a single kernel config file. The kernel size penalty involved in adding support for all the peripherals on both boards is small enough to justify this. However, the original Minnowboard has some GPIO buttons that need to be registered by the kernel. This is not upstreamed, and hence we need to use the yocto v3.8 kernel to have this support. 3) Rename each grub config to grub-{board}.cfg. 4) Modify (the now unique) post-build script to use a different grub config, according to the board. 5) Update both defconfigs, as per the above changes. 6) Finally, update the readme.txt. [Peter: mention MAX in readme title] Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/minnowboard: Rework to generate SD card imageGravatar Ezequiel García2016-04-181-0/+9
| | | | | | | | Let's rework the board and config files to use genimage to generate the SD card image directly. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: add qemu_xtensa_lx60_nommu_defconfigGravatar Max Filippov2016-04-181-0/+34
| | | | | | | | Add noMMU configuration running on dc233c MMUv3 core with identity memory map. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/qemu_xtensa_lx60_defconfig: switch to dc233cGravatar Max Filippov2016-04-181-1/+1
| | | | | | | | | | | dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the latest full MMU for xtensa, which allows running both MMU and noMMU linux variants. Update configuration overlay and linux config file. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* raspberrypi, raspberrypi2: add a serial consoleGravatar Luca Ceresoli2016-04-182-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2 instantiate a console on tty1, which appears on HDMI. Add a console on the serial port (ttyAMA0) to be more consistent with other defconfigs and provide a better out-of-the-box experience to users used to have a serial console from Buildroot defconfigs. This requires three changes: 1. have two 'console=' entries in the kernel command line: tty1, then ttyAMA0; 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts a getty on the last console= passed to the kernel, ttyAMA0; 3. add a new getty on tty1 to the generated inittab. Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT entirely from the defconfigs, since "console" is the default value. Step 3 requires a post-build script since the Buildroot makefiles can configure only one console. Note: instead of simply adding a new getty on ttyAMA0 (which would work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to instantiate a console on UART, then adds back tty1 via post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment where we instantiate an HDMI console, then instantiate a really-serial console on another line. The result is these two inittab lines: console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console Cc: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs/stm32f469_disco: new configuration for STM32F469 Discovery boardGravatar Lee Jones2016-04-161-0/+19
| | | | | | | | | | | | | | | | | | Similar to stm32f429_disco, this commit adds a configuration for the Cortex-M4 based STM32F469 platform. It requires a few kernel patches, which have already been submitted upstream, as well as a small OpenOCD patch. Besides that, it re-uses most of what has been added for the STM32F429 platform. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Thomas: - squash multiple patches from Lee Jones into one - improve the readme.txt file - sync the defconfig with the adaptations made to the stm32f429 configuration.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/stm32f429_disco: new configuration for STM32F429 Discovery boardGravatar Lee Jones2016-04-161-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds a defconfig for the STM32F429 platform, which is based on a Cortex-M4 core from ST Microelectronics. It is therefore the first noMMU ARM platform supported in Buildroot. This commit includes some files that will be common to several STM32 platforms (hence in board/stmicroelectronics) and some files that are specific to the STM32F429 (hence in board/stmicroelectronics/stm32f429-disco). More specifically, this commit adds: - A minimal Busybox configuration, which is small enough to boot without causing OOM on such small noMMU platforms. The resulting Busybox, statically linked with uClibc-ng, weights around 220 KB. For now, this file is located in board/stmicroelectronics/, but we might consider moving it to package/busybox/ in the future if needed. - A post-build script that removes the mounting of /dev/pts (not enabled in the kernel and not very useful for a system that has no network and no X), and removes the network related init script and configuration files (no network support). - A flash.sh script, to perform the right OpenOCD invocations to reflash the board. - One small kernel patch to adjust the kernel command line in the Device Tree, since it's the only way to do so. - The usual readme.txt file. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Thomas: - squashed multiple patches from Lee Jones together - added the minimal Busybox configuration - added the post-build script - improved the flashing script to not hardcode the location of the output directory - add the small kernel patch - improve the readme.txt file - test on HW the resulting image, after using the internal toolchain.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* freescale_imx6sxsabresd_defconfig: fix kernel headers versionGravatar Peter Korsgaard2016-04-151-2/+2
| | | | | | | | | | Fixes https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123187910 Commit 1e5bc05a04d (configs: freescale_imx6*: bump version to 3.14.52-1.1.0_ga) updated the kernel but forgot to change the kernel headers version to match. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* s6lx9_microboard_defconfig: lock kernel versionGravatar Peter Korsgaard2016-04-151-0/+2
| | | | | | | | | Fixes https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123187960 The defconfig broke after we moved the default kernel version to 4.5.x. Fix it by locking the kernel version in the defconfig. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/raspberrypi2_defconfig: configure eth0 through dhcpGravatar Peter Korsgaard2016-04-151-0/+1
| | | | | | The rpi2 board has an ethernet port, so configure it at startup. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/raspberrypi_defconfig: configure eth0 through dhcpGravatar Peter Korsgaard2016-04-151-0/+1
| | | | | | The rpi board has an ethernet port, so configure it at startup. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/minnowboard_max: configure eth0 through dhcpGravatar Peter Korsgaard2016-04-151-0/+1
| | | | | | The minnowboard max board has an ethernet port, so configure it at startup. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: atmel: add sama5d3 xplained sd card image generationGravatar Ludovic Desroches2016-04-131-0/+6
| | | | | | | | Use genimage to generate a sd card with a fat partition (at91bootstrap, u-boot, kernel, dtbs) and an ext4 partition (rootfs). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: add sama5d4 xplained sd card image generationGravatar Ludovic Desroches2016-04-131-0/+6
| | | | | | | | Use genimage to generate a sd card with a fat partition (at91bootstrap, u-boot, kernel, dtbs) and an ext4 partition (rootfs). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: add sama5d2 xplained sd card image generationGravatar Ludovic Desroches2016-04-131-0/+6
| | | | | | | | Use genimage to generate a sd card with a fat partition (at91bootstrap, u-boot, kernel, dtbs) and an ext4 partition (rootfs). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* board/minnowboard-max: Rework to generate SD card imageGravatar Ezequiel García2016-04-131-0/+9
| | | | | | | | | | Let's rework the board and config files to use genimage to generate the SD card image directly. [Peter: add host-mtools for genimage vfat handling] Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* linux: use zImage by default on ARMGravatar Thomas Petazzoni2016-04-0562-46/+16
| | | | | | | | | | | | | | | | | | | Since quite some time, the kernel and bootloader communities consider zImage as the default format for kernel images on ARM, replacing uImage. The load address information in uImage is no longer needed, since the kernel is position-independent in terms of physical address, except on a few old platforms. For most people, using zImage is simply better/simpler, so let's switch to zImage as the default image format on ARM. All defconfigs are updated: 46 defconfigs no longer need to select explicitly zImage because it's the default, and 16 defconfigs now need to explicitly select uImage because that's no longer the default. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Matt Weber <matt@thewebers.ws> Acked-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: rename Zynq defconfig filesGravatar Masahiro Yamada2016-03-313-0/+0
| | | | | | | | | | | | | | | | These three are Zynq boards and the build procedure is almost the same. Having the SoC name prefix "zynq_" would be more consistent. Also, this is the way in which the Linux Device Trees and the U-Boot configuration files do. This commit renames as follows: zedboard_defconfig -> zynq_zed_defconfig microzed_defconfig -> zynq_microzed_defconfig xilinx_zc706_defconfig -> zynq_zc706_defconfig Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: add support for sama5d2 xplained boot from sd cardGravatar ludovic.desroches@atmel.com2016-03-241-0/+26
| | | | | | | | | This defconfig allows to build all the components to boot from a sd card on a SAMA5D2 Xplained board. For more details, please read the board/atmel/readme.txt file. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: add support for sama5d4 xplained boot from sd cardGravatar ludovic.desroches@atmel.com2016-03-241-0/+25
| | | | | | | | | | This variant of SAMA5D4 Xplained defconfig file allows to boot from a SD card. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [Thomas: remove host-samba from the package selection, not needed when booting from SD card.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: atmel: unify and update defconfig for Xplained boardsGravatar ludovic.desroches@atmel.com2016-03-243-30/+34
| | | | | | | | | | Unify and update the defconfig files for Atmel Xplained boards: - use at91bootstrap as first stage bootloader instead of u-boot spl - build all dtb variants - bump to linux4sam_5.2 Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* qemu-m68k: add new boardGravatar Waldemar Brodkorb2016-03-201-0/+25
| | | | | | | | Ethernet is not working, but at least you get a shell and can test applications for m68k. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: nitrogen*: bump kernel version to 3.14.52-1.1.0_gaGravatar Gary Bisson2016-03-193-6/+7
| | | | | | | | | | | | | | Also add device tree of our Nitrogen6_Max QuadPlus version: https://boundarydevices.com/product/nitrogen6max/ As well as our latest SOM version: https://boundarydevices.com/product/nit6x-som-v2/ Using the latest commit of our 3.14.52 kernel branch: https://github.com/boundarydevices/linux-imx6/commits/boundary-imx_3.14.52_1.1.0_ga Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: freescale_imx6*: bump version to 3.14.52-1.1.0_gaGravatar Gary Bisson2016-03-196-12/+12
| | | | | | | | | | | Consolidated GA support i.MX 6Q/QP/D/S/SL/UL and 7Dual This patch is based on the Yocto equivalent: https://github.com/Freescale/meta-fsl-arm/commit/9f206ec7 https://github.com/Freescale/meta-fsl-arm/commit/33d1115d Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* configs: pandaboard: bump kernel to 4.5Gravatar Peter Korsgaard2016-03-151-2/+2
| | | | | | | | | Notice: We cannot move to u-boot 2016.03 without changing the boot setup as 2016.03 broke legacy boot on omap4. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: configure eth0 at startupGravatar Peter Korsgaard2016-03-151-0/+1
| | | | | | | | | Now that we have modules (including usb/net) loaded automatically, we can enable dhcp on eth0. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: use mdev for automatic module loadingGravatar Peter Korsgaard2016-03-151-0/+1
| | | | | | | | | The omap2plus kernel defconfig builds most drivers as modules, so we need (automatic) module loading to be able to use usb/display/.. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: orangepipc: bump u-boot to 2016.03, kernel to 4.5Gravatar Peter Korsgaard2016-03-151-7/+3
| | | | | | Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/qemu: bump to the latest linux versionsGravatar Gustavo Zacarias2016-03-1420-75/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm_versatile kernel defconfig updated to deal with multi-platform ARM support and driver changes. mips(el) 32-bits is back in working order for 4.5 Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.5 2.3.0 YES OK arm_versatile 4.5 2.3.0 YES OK arm_vexpress 4.5 2.3.0 YES OK microblazebe 4.5 2.3.0 YES OK microblazeel 4.5 2.3.0 YES OK mips64el_malta 4.5 2.3.0 YES OK mips64_malta 4.5 2.3.0 YES OK mipsel_malta 4.5 2.3.0 YES OK mips_malta 4.5 2.3.0 YES OK ppc_g3beige 4.5 2.3.0 YES OK ppc_mpc8544ds 4.5 2.3.0 YES OK ppc_virtex_ml507 4.5 2.3.0 NO OK ppc64_pseries 4.5 2.3.0 YES OK sh4 4.5 2.3.0 YES OK sh4eb 4.5 2.3.0 NO (1) OK sparc_ss10 4.5 2.3.0 YES OK sparc64_sun4u 4.5 2.3.0 YES OK sparc_sun4u 4.5 2.3.0 YES OK x86 4.5 2.3.0 YES OK x86_64 4.5 2.3.0 YES OK xtensa_lx60 4.4.5 2.3.0 YES (2) OK (1) - Probably an endian issue with 8139 emulation/driver (2) - xtensa ethernet broken in 4.5 so stick to 4.4.x Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: via_imx6_vab820: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+2
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: pandaboard: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+1
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: orangepipc: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+1
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: galileo: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+1
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: cubieboard2: correct genimage dependenciesGravatar Peter Korsgaard2016-03-131-0/+2
| | | | | | | The genimage configuration creates a vfat filesystem, so ensure we have dosfstools / mtools built for the host. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* olimex_imx233_olinuxino_defconfig: genimage supportGravatar Phil Eichinger2016-03-111-0/+7
| | | | | | | | | | * add a post-image.sh script * update defconfig for genimage * update readme.txt [Peter: also add host-dosfstools dependency for vfat partition] Signed-off-by: Phil Eichinger <phil@zankapfel.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/altera_sockit_defconfig: use http access for u-boot/linux git reposGravatar Peter Korsgaard2016-03-101-2/+2
| | | | | | | | | | | Fixes: https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/114650744 git:// access to git.rocketboards.org has been failing for a while, and git:// is sometimes not allowed through corporate firewalls, so change to git-over-http instead. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/altera_socdk_defconfig: use http access for u-boot/linux git reposGravatar Peter Korsgaard2016-03-101-2/+2
| | | | | | | | | | | Fixes: https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/114650743 git:// access to git.rocketboards.org has been failing for a while, and git:// is sometimes not allowed through corporate firewalls, so change to git-over-http instead. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/olimex_imx233_olinuxino: switch to u-bootGravatar Phil Eichinger2016-03-061-20/+17
| | | | | | | | | | | | | | | | | | | mxs-bootlets broke somewhere in between toolchain version bumps, leading to boot failure. Directly boot u-boot, as this is supported now, but it requires updated partitioning (see readme.txt) Drop mxs-bootlets patches, they aren't needed anymore. Kernel is built as an uImage because the u-boot defconfig expects an uImage on the second partition. Tested on iMX233-OLinuXino-MINI hardware. [Peter: adjust readme/config as suggested by Arnout] Signed-off-by: Phil Eichinger <phil@zankapfel.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/boundarydevices: rename folder and update readmeGravatar Gary Bisson2016-03-033-6/+6
| | | | | | | | | | | | It didn't make sense to keep the U-Boot scripts and post build/image scripts under the nitrogen6x folder since they apply for all our platforms. Also update the readme.txt to make it clearer which defconfig should be used depending on the platform targeted. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Merge branch 'next'Gravatar Peter Korsgaard2016-03-029-40/+143
|\ | | | | | | Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
| * configs/arm_foundationv8: bump to Linux 4.4.3Gravatar Masahiro Yamada2016-02-261-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Bump to the latest kernel with DT path adjustment because Linux commit ca5b34100c57 ("dts, arm64: Move dts files to vendor subdirs") moved the DT file to the vendor sub-directory. This commit was tested with the latest model (FVP v8 Foundation Platform 9.5 build 41), so I updated the instruction in readme.txt corresponding to it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
| * pandabord: use genimage to generate sdcard imageGravatar Peter Korsgaard2016-02-261-0/+3
| | | | | | | | | | | | And drop the manual sdcard generation description from the readme. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>