aboutsummaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* configs/freescale_{p1025twr, t1040d4rdb}: headers versionGravatar Vincent Stehlé2018-04-122-0/+6
| | | | | | | | | | | | | The freescale p1025twr and t1040d4rdb defconfigs use a 4.15 series kernel; specify BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15 accordingly. This fixes the following build error: Incorrect selection of kernel headers: expected 4.16.x, got 4.15.x Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8mqevk: new defconfigGravatar Erik Larsson2018-04-121-0/+41
| | | | | | Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/chiliboard: Bump Linux to 4.16.1Gravatar Marcin Niestroj2018-04-121-2/+2
| | | | | Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/chiliboard: Bump U-Boot to 2018.03Gravatar Marcin Niestroj2018-04-121-3/+2
| | | | | Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/mx6cubox: Bump U-Boot and kernel versionsGravatar Fabio Estevam2018-04-111-4/+4
| | | | | | | Bump U-Boot version to 2018.03 and kernel to 4.16.1. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/wandboard: bump to kernel 4.16Gravatar Fabio Estevam2018-04-091-3/+3
| | | | | Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/zynq_zed: linux: bump to latest mainline kernelGravatar Luca Ceresoli2018-04-091-4/+4
| | | | | | | | | | | The Zynq SoCs are now well supported in the mainline kernel, thus stop using the Xilinx fork. As there is not xilinx_zynq defconfig in mainline, use the default arch config. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/at91sam9g20dfc: add ubifs target filesystemGravatar Joshua Henderson2018-04-071-0/+7
| | | | | | | | | This is a required component to complete the configuration. It also makes sense to add ubifs so that this board can be flashed with the board/atmel/flasher.sh script. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* board/raspberrypi: add support for rpi3 b+Gravatar Martin Bark2018-04-062-2/+2
| | | | | Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi*: bump kernel versionGravatar Martin Bark2018-04-067-21/+21
| | | | | | | | | Now based on 4.14.29 (from 4.9.79) Signed-off-by: Martin Bark <martin@barkynet.com> [Thomas: adjusted on top of Yann E. Morin changes to use a tarball instead of a git clone.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/atmel: bump at91 defconfigs to at91bootstrap 3.8.10Gravatar Joshua Henderson2018-04-064-4/+4
| | | | | | | | | | | Bump at91sam9260ek, at91sam9g20, at91sam9g45m10ek, and at91sam9rlek to at91bootstrap 3.8.10. at91bootstrap 3.8.10 is required to support gcc7. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/atmel_sama5d3xek: bump to linux4sam_5.8Gravatar Joshua Henderson2018-04-061-4/+5
| | | | | | | | | | | | Bump sama5d3xek to linux4sam_5.8. The 3 foundation components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel). This requires bumping the kernel header version and u-boot dtc as well. at91bootstrap 3.8.10 is required to support gcc7. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/bananapro: bump U-Boot to version 2018.03Gravatar Jörg Krause2018-04-051-1/+1
| | | | | Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/bananapro: bump Linux to version 4.14.32Gravatar Jörg Krause2018-04-051-1/+1
| | | | | Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/wandboard: Bump to U-Boot 2018.03Gravatar Fabio Estevam2018-04-041-1/+1
| | | | | Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/warp7: Bump kernel versionGravatar Fabio Estevam2018-04-041-3/+3
| | | | | | | Bump kernel version to 4.15.15. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/qemu_ppc64_e5500_defconfig: needs host-openssl for the Linux kernel ↵Gravatar Matt Weber2018-04-031-0/+1
| | | | | | | build Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs: beaglebone: bump kernel and uboot versionGravatar Lothar Felten2018-04-021-5/+3
| | | | | | | | | | Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09 (TI SDK release date: 23.12.2017) Updated uboot to version 2018.01 uEnv.txt corrected to boot from sd card on the ti-am335x-evm Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs: switch to a wget download for kernels on githubGravatar Yann E. MORIN2018-04-0236-110/+73
| | | | | | | | | | | | | | | | | | | | | | | | The linux git trees on github can be huge, and takes a long time to download, which is not very nice nor convenient for newcomers. Switch them to using a wget, with the github macro. A nice side effect of this conversion, is that we no longer need to wait for the git clone to finish to notice that the ref is gone; doing a wget will instantly fail in that case. Mechanical patch, obtained by running (hang-on tight): $ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*) olimex_a20_olinuxino_lime_mali had a comment in between, so it was manually fixed thereafter; that comment was also moved. Except for socrates_cyclone5 which did not work previously (missing tag in git tree?), all the affected defconfigs still download their sources. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/qemu_ppc64_e5500: new defconfigGravatar Matt Weber2018-04-021-0/+20
| | | | | | | | | | Adding basic support modeled after the Freescale/NXP T1040RDBD4 board. This target is used to support testing of the bootlin e5500 toolchain. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> [Thomas: update .gitlab-ci.yml.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* New board: SolidRun ClearFog BaseGravatar Jan Kundrát2018-04-011-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My goal was to rely on upstreamed features as much as possible, which means that some bits are only half-baked for now: - Due to the DTS restructuring in upstream kernel, we require 4.11+. The latest LTS or CIP kernels do not know about the -Base model. - Linux has no generic support for SFP cages (yet). It seems that this has hit the net-next tree in August 2017, but there's been no release (it's probably targettting 4.14). Also, the merge only included the required infrastructure; the mvneta driver conversion is not included. Patches which finalize this exist in Russel King's tree and also in random vendor trees. - There's no access to the SPI flash in these versions of uboot/linux/dts. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> [Arnout: - rename to solidrun_clearfog_defconfig; - specify kernel headers version (default is now 4.15); - remove ext2 fs size override, the 4 extra MB are not needed; - U-Boot needs dtc and openssl; - add comments to defconfig; - update .gitlab-ci.yml; - mention in readme.txt that SFP support is missing; - add Jan to DEVELOPERS. ] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* configs/s6lx9_microboard_defconfig: purge custom dts booleanGravatar Rafal Susz2018-03-311-1/+0
| | | | | | | | Since custom dts files are unconditionally handled *KERNEL_USE_CUSTOM_DTS is no longer available/needed. Signed-off-by: Rafal Susz <rafal.susz@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board: add support for ARC HS Development Kit (HSDK)Gravatar Evgeniy Didin2018-03-311-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU (well supported via open source Etnaviv drivers) * Built-in Wi-Fi/Bluetooth module (RedPine RS-9113) And as usual we have: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port Writing sdcard.img on SDcard creates two partitions: * FAT32 with uImage and uboot.env * EXT4 with root filesystem We modify kernel config because in default hsdk kernel config CONFIG_INITRAMFS_SOURCE parameter is set and when we build rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set) error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which enables usage of uboot variables in the boot process. [Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig, Add defconfig to DEVELOPERS and fixup board/synopsys entry, Drop postimage script, rename env file in genimage.cfg and drop size setting for rootfs partition, Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment] Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: arc-buildroot@synopsys.com Reviewed-by: Romain Naour <romain.naour@smile.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/raspberrypi0w_defconfig: new defconfig for Raspberry Pi Zero WGravatar Yves Deweerdt2018-03-312-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal raspberrypi0_defconfig. However, then you don't have support for the Bluetooth out-of-the-box, which makes using a W a bit pointless. Therefore, create a separate defconfig for the W. It is a copy of raspberrypi0_defconfig with the following changes: - Add DT overlays (from rpi-firmware) to support Bluetooth. - Pass --add-pi3-miniuart-bt-overlay to post-image.sh. Since there is now a separate raspberrypi0w_defconfig, the W support can be removed from raspberrypi0_defconfig. Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com> [Arnout: - Bump to same kernel version as raspberrypi0. - Remove redundant comment. - Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y. - Improve commit log. - Refresh .gitlab-ci.yml. ] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* configs/atmel: bump to linux4sam_5.8Gravatar Joshua Henderson2018-03-3015-45/+45
| | | | | | | | | | | | | Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to linux4sam_5.8. The 3 foundation components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel). at91bootstrap 3.8.10 is required to support gcc7. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/arcturus_ucls1012a: new defconfigGravatar Oleksandr Zhadan2018-03-261-0/+37
| | | | | | | | | | | | | | | | The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc. 64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is available with 1 or 2 Gig-Ethernet PHYs. Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Changes v1 -> v2: - updated kernel and u-boot source repositories to github Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_p1025twr: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-241-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/59015355 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/qemu_aarch64_virt: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-241-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/59015465 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot versionsGravatar Francois Perrad2018-03-173-5/+5
| | | | | Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_t1040d4rdb_defconfig: new boardGravatar Matt Weber2018-03-111-0/+20
| | | | | | | | | | | | | | | | | | | The T1 QoriQ from NXP has had a few varients of RDB dev boards. This target is against the latest D4RDB version. Any of the other versions before D4RDB (plain RDB), may require backing off the uboot version to SDK 1.6 and/or adjusting the kernel dtb used. This board configuration provides an upstream kernel build which has been verified to boot on target. The target assumes the user still uses the NXP suggested prebuilts in the SDK2.0 (last release for PowerPC). If a uboot rebuild is required, the source for SDK2.0 can be found in the following repo. http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_p1025twr_defconfig: new boardGravatar Matt Weber2018-03-111-0/+20
| | | | | | | | | | | | | | | Replacing the p1010rdb, this board is based on the tower development system still available by NXP. The board is setup to track upstream Linux and has been bumped from 4.1 to 4.15 (compared to p1010). The target does not build uboot and assumes the user still uses the NXP suggested prebuilts in the SDK2.0 (last release for PowerPC). If a uboot is required, the source for SDK2.0 can be found in the following repo. http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/technologic/ts5x00: rename to ts5500Gravatar Vivien Didelot2018-03-111-2/+2
| | | | | | | | | Rename the confusing and misleading ts5x00 directory to a real reference platform name, ts5500. The readme.txt file already states the support for both TS-5500 and TS-5400 platforms. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/technologic/ts5x00: bump kernel to 4.14Gravatar Vivien Didelot2018-03-111-4/+4
| | | | | | | | | | | | | | Bump the 3.17 kernel used for the Technologic Systems TS-5500 platform to the latest LTS kernel 4.14. This fixes the ts5x00_defconfig build with GCC 6.x. The linux-3.17.config file has been renamed to linux-4.14.config to match the new kernel version, and its changes are the result of make linux-update-defconfig. However only comments are affected. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/riotboard: remove defconfigGravatar Thomas Petazzoni2018-03-091-36/+0
| | | | | | | | | | | | | | | | This defconfig fails to build with gcc 6.x, even though we switched to using gcc 6.x as the default gcc version in May 2017. This defconfig also hasn't seen any non-mechanical update since November 2015. So it's time to get rid of it, in order to remove the following build failure: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/teliv_evk_pro3: remove defconfigGravatar Thomas Petazzoni2018-03-071-32/+0
| | | | | | | | | | | | | | | | | | | | This defconfig fails to build with gcc 6.x, even though we switched to using gcc 6.x as the default gcc version in May 2017. It hasn't been updated since April 2017, and the original submitter, Fabio Porcedda said: Unfortunately a newer kernel doesn't boot and I don't have the time to fix the issue. If having a defconfig that doesn't build on gcc 6.x is unacceptable feel free to remove it. So, let's get rid of this defconfig, which will remove the following build error: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306952 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/ts4900: explicitly specify Linux kernel versionGravatar Thomas Petazzoni2018-03-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | The ts4900 defconfig currently fails to build because it selects kernel headers 4.12, but doesn't specify a kernel version, and therefore 4.15 is built causing the following error: Incorrect selection of kernel headers: expected 4.12.x, got 4.15.x In commit 7c3a7d808e751d4b608a4c50a0ae4d13dedebab7 ("configs/ts4900: bump kernel version to 4.12"), when this defconfig was switched from using a vendor provided kernel to the mainline kernel, the kernel version was no longer explicitly specified. Since this commit indicated 4.12, and the kernel headers version selected is also 4.12, we also use that as the fixed kernel version. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306955 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6sxsabresd: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306823 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6qsabresd: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306821 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/imx6ulevk: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306824 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx7dsabresd: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306825 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6dlsabreauto: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306818 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6dlsabresd: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306819 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6sololiteevk: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306822 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/solidrun_macchiatobin_marvell: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306949 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/freescale_imx6qsabreauto: U-Boot needs host-dtcGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306820 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/solidrun_macchiatobin_mainline: needs host-openssl for the Linux ↵Gravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | | | kernel build Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306948 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/snps_arc700_axs101: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306943 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/imx6-sabresd: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306836 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/mx53loco: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306856 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/snps_archs38_vdk: needs host-openssl for the Linux kernel buildGravatar Thomas Petazzoni2018-03-061-0/+1
| | | | | | | | | Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306946 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>