aboutsummaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* configs/freescale_imx8*: bump BSP components to 5.4.70_2.3.0Gravatar Stephane Viau3 days2-6/+6
| | | | | | | | | | | | Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions. Build- and run-tested on: o i.MX8QM MEK o i.MX8QXP MEK rev B0 Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> Tested-by: Stephane Viau <stephane.viau@oss.nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8m*: bump BSP components to 5.4.70_2.3.0Gravatar Stephane Viau3 days3-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions. Note for configs/freescale_imx8mmevk: On 5.4.70_2.3.0 the default "i.MX8MM LPDDR4 EVK RevB board" support is removed and replaced by "i.MX8MM LPDDR4 EVK with QCA WIFI revB board". In case an older revB board is used, then the following step in U-Boot is needed: => setenv fdt_file imx8mm-evk-revb-qca-wifi.dtb => saveenv => reset Build- and run-tested on: o i.MX8MN DDR4 EVK o i.MX8MQ EVK Build-tested only for other configs. Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> Tested-by: Stephane Viau <stephane.viau@oss.nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx7dsabresd: bump BSP components to 5.4.70_2.3.0Gravatar Stephane Viau3 days1-2/+2
| | | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build-tested only] Tested-by: Stephane Viau <stephane.viau@oss.nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx6*: bump BSP components to 5.4.70_2.3.0Gravatar Stephane Viau3 days6-12/+12
| | | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [run-tested on i.MX6Q SabreSD, build-tested only for other configs] Tested-by: Stephane Viau <stephane.viau@oss.nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/solidrun_macchiatobin: bump BSP componentsGravatar Sergey Matyukevich3 days1-7/+6
| | | | | | | | | | | | | | Bump U-Boot and Linux kernel versions. Fix recent build failures caused by mv-ddr-marvell package update. Marvell ATF does not provide a version compatible with up-to-date mv-ddr-marvell. According to commit log, Marvell developers are now contributing directly to upstream ATF. So switch to upstream ATF instead of using older Marvell ATF versions. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/938922500 Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/snps_archs38_hsdk_defconfig: enable C++ supportGravatar Vineet Gupta3 days1-0/+1
| | | | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [yann.morin.1998@free.fr: only enable C++] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/snps_archs38_hsdk_defconfig: use hard-floatGravatar Vineet Gupta3 days1-0/+1
| | | | | | | | | | | | Hard-float support is pretty stable, so make that default for HSDK boards. The hard-float setting is a bit convulated since current ARC gcc lacks --with-fpu - so this is done with BR2_TARGET_OPTIMIZATION Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [yann.morin.1998@free.fr: split off into its own commit] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/snps_archs38_hsdk_defconfig: switch to glibcGravatar Vineet Gupta3 days1-0/+2
| | | | | | | | | We are no longer actively working on uClibc, so make that default for HSDK boards. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [yann.morin.1998@free.fr: drop enabling hard float] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/snps_archs38_hsdk_defconfig: refresh defconfigGravatar Vineet Gupta3 days1-17/+5
| | | | | | | | | | No config changes done | make snps_archs38_hsdk_defconfig | make savedefconfig Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/qemu_s390x_defconfig: bump kernel version to 5.10.7Gravatar Alexander Egorenkov5 days1-3/+3
| | | | | Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/kontron_smarc_sal28: integrate RCW into rootfs imageGravatar Michael Walle5 days1-0/+1
| | | | | | | | | Integrate the RCW into the storage device image, so the image can also be used a boot source. The SoC expects the RCW at offset 4096 of the SD card or eMMC. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/kontron_smarc_sal28: enable u-bootGravatar Michael Walle5 days1-0/+10
| | | | | | | | | Enable building of the bootloader and integrate it into the resulting image. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/qemu_*: bump kernel version to 5.4.88Gravatar Geoffrey Le Gourriérec8 days36-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bump QEMU defconfigs to latest longterm kernel 5.4.88. Please note that QEMU boards not based on 5.4.y were ignored: - qemu_csky810_virt_defconfig - qemu_csky807_virt_defconfig - qemu_csky610_virt_defconfig - qemu_csky860_virt_defconfig Tests were carried out on all QEMU boards using Gitlab [1] (commit message was slightly different, but the patch is identical) Additional actions needed were: - board/qemu/sh4-r2d: Remove one of the two kernel patches [2] provided by Alan Modra fixing rodata alignment, carried here by Romain Naour [3] to fix an issue preventing kernel from booting with binutils 2.23. Patch is present in upstream Linux now. [1] https://gitlab.com/clumsyape/buildroot/-/pipelines/239483891 [2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html [3] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219 Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/solidrun_clearfog_gt_8k: bump BSP componentsGravatar Baruch Siach10 days1-7/+7
| | | | | | | | | | | | | | | | Switch to upstream ATF of recent version to fix build with recently updated mv-ddr. The vendor does not provide public access to newer ATF versions anymore. Bump U-Boot and kernel to fix dtc build on hosts with gcc 10. Increase rootfs size. The default 60MB is not enough. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/948622614 Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/microchip_sam9x60ek: new defconfigsGravatar Eugen Hristev2021-01-022-0/+104
| | | | | | | | Add the new SAM9X60 Evaluation Kit with linux4sam_2020.04 components. Update README file with new defconfigs. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/nitrogen8m*: new uboot requires host sslGravatar Gary Bisson2021-01-023-0/+3
| | | | | | | | | | Fixes: 8f75e63ec4 ("configs/nitrogen*: bump u-boot to version 2020.10") https://gitlab.com/buildroot.org/buildroot/-/jobs/938922366 https://gitlab.com/buildroot.org/buildroot/-/jobs/938922367 https://gitlab.com/buildroot.org/buildroot/-/jobs/938922368 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/rock64: new defconfigGravatar Min Xu2020-12-311-0/+40
| | | | | | | | | | Re-introduced rock64_defconfig which was dropped by commit a5fa2469e6506ea4f5a91739aa099f63a10e45ce ('Revert "configs/rock64_defconfig: remove defconfig"'). Signed-off-by: Min Xu <xuminready@gmail.com> Tested-by: Michał Łyszczek <michal.lyszczek@bofc.pl> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/nitrogen*: bump u-boot to version 2020.10Gravatar Gary Bisson2020-12-296-18/+18
| | | | | | | | - U-Boot branch boundary-imx_v2020.10 from our repo - Also bump ATF to boundary-imx_5.4.47_2.2.0 for i.MX8* Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/nitrogen*: update kernel to 5.4.x_2.2.0Gravatar Gary Bisson2020-12-296-12/+12
| | | | | | | | - Based upon NXP 5.4.47_2.2.0 release - Integrated stable fixes up to 5.4.80 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8qxpmek: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-3/+3
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build- and run-tested on i.MX8QXP MEK rev B0] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8qmmek: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-3/+3
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build- and run-tested on i.MX8QM MEK] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8mqevk: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-3/+3
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build- and run-tested on i.MX8MQ EVK] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8mnevk: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-3/+3
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build- and run-tested on i.MX8MN DDR4 EVK] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx8mmevk: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-3/+3
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build-tested only] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx7dsabresd: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-261-2/+2
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [Build-tested only] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/freescale_imx6*: bump BSP components to 5.4.47_2.2.0Gravatar Stephane Viau2020-12-266-12/+12
| | | | | | Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> [run-tested on i.MX6Q SabreSD, build-tested only for other configs] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi*: bump kernel version to 967d45b (5.10.1)Gravatar Peter Seiderer2020-12-239-27/+27
| | | | | | | | Now based on 5.10.1 (from 5.4.80). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/nitrogen6x_defconfig: remove duplicate BR2_PACKAGE_HOST_UBOOT_TOOLS=yGravatar Romain Naour2020-12-231-1/+0
| | | | | | | | | | | | | | The commit [1] added this option a second time. Remove the first occurence. Fixes: configs/nitrogen6x_defconfig:31:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [1] 6ea9f662a03e0f4b4a9000a25095b8e6293b07b6 Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/chromebook_elm_defconfig: use linux headers same as kernel (5.9 series)Gravatar Peter Seiderer2020-12-201-0/+3
| | | | | | | | | | | | | Use linux headers same as kernel (5.9 series). Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/917539050 Incorrect selection of kernel headers: expected 5.10.x, got 5.9.x Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/roseapplypi: bump kernel to 5.10.1Gravatar Peter Korsgaard2020-12-191-3/+3
| | | | | | | | | And drop now upstreamed patches. Mmc support is still not mainline, but enqueued for 5.12: https://www.spinics.net/lists/linux-i2c/msg49279.html Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/imx6-sabresd: bump kernel version to 5.10Gravatar Fabio Estevam2020-12-162-6/+6
| | | | | | | Bump the kernel version to 5.10. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/kontron_smarc_sal28: use kernel 5.10Gravatar Michael Walle2020-12-141-2/+2
| | | | | | Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/beaglebone_qt5: switch to using KMS instead of wayland+westonGravatar Adam Duskett2020-12-131-4/+1
| | | | | | | | | | weston does not work on the ti-sgx SDK, so switch to using KMS directly, and drop the wayland-related config options. Signed-off-by: Adam Duskett <Aduskett@gmail.com> [yann.morin.1998@free.fr: split into its own patch] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi*: bump kernel version to f4b5d0d (5.4.80)Gravatar Peter Seiderer2020-12-079-9/+9
| | | | | | | Now based on 5.4.80 (from 5.4.72). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/qemu_arm_vexpress_tz_defconfig: build start-qemu.shGravatar Romain Naour2020-12-051-0/+4
| | | | | | | | | | | | | | | | | When tags was added by commit 011206b2bffd509b29365bc1eaa761414ee13726 to detect the qemu command line, the qemu_arm_vexpress_tz_defconfig was ignored due to a build issue. This build issue has been fixed by previous patches, so we can enable the runtime testing by adding the tag in the readme.txt and the post-image script in the defconfig. Since Qemu from HOST_DIR is now executed directly from BINARIES_DIR, we can remove all the string before "qemu-system-*". Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/arm_foundationv8: bump to Linux 5.9.11Gravatar Vincent Stehlé2020-12-011-5/+8
| | | | | | | | | | | | - Bump to the latest kernel v5.9.11 and require openssl. - Switch to PSCI for bringing up the secondary CPUs. - Switch to GICv3. - Update the instruction in the readme.txt to use the latest FVP v8 Foundation Platform 11.12 build 38, and to start 4 cores in SMP. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/bananapi_m2_zero: bump Linux and U-Boot versionsGravatar Vincent Stehlé2020-11-281-3/+3
| | | | | | | Bump Linux kernel to 5.9.11 and U-Boot to 2020.10. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/aarch64_efi: bump kernel versionGravatar Vincent Stehlé2020-11-281-3/+3
| | | | | | | | Bump Linux kernel version to 5.9.11. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/rock64_defconfig: remove defconfigGravatar Romain Naour2020-11-121-38/+0
| | | | | | | | | | | | | | | | | | | | | | The rock64 defconfig is currently broken [1][2] since a while due to incompatibility between uboot-2017.09-rockchip-ayufan fork and pylibfdt. Even with the latest uboot-2017.09-rockchip-ayufan fork version [3], it doesn't build. The original submitter tried the uboot upstream rock64-rk3328_defconfig but the board doesn't boot [4]. In order to not release 2020.05 with a broken defconfig, let's remove it. It can be re-added later once the uboot issue has been resolved. [1] 2020.05-rc2: https://gitlab.com/buildroot.org/buildroot/-/jobs/563613273 [2] 2020.02: https://gitlab.com/buildroot.org/buildroot/-/jobs/548596102 [3] https://github.com/ayufan-rock64/linux-u-boot/releases/tag/2017.09-rockchip-ayufan-1065-g95f6152134 [4] http://lists.busybox.net/pipermail/buildroot/2020-May/282164.html Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Michał Łyszczek <michal.lyszczek@bofc.pl> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* configs/qemu_arm_vexpress_defconfig: increase SD card image size to 64MiBGravatar Romain Naour2020-11-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB). qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB SD card size has to be a power of 2, e.g. 64 MiB. You can resize disk images with 'qemu-img resize <imagefile> <new-size>' (note that this will lose data if you make the image smaller than it currently is). qemu-system-arm: sd_init failed From [1]: "While the possibility to use small SD card images has been seen as a feature, it became a bug with CVE-2020-13253, where the guest is able to do OOB read/write accesses past the image size end." The qemu_arm_vexpress_tz_defconfig doesn't trigger such issue since it doesn't use the same filesystem support (i.e doesn't use -drive file=output/images/rootfs.ext2,if=sd,format=raw). Fixes: https://gitlab.com/kubu93/buildroot/-/jobs/766482935 [1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Revert "configs/qemu_arm_versatile_defconfig: increase SD card image size to ↵Gravatar Romain Naour2020-11-101-2/+0
| | | | | | | | | | | | | | 64MiB" qemu_arm_versatile doesn't use SD card interface but SCSI, so there is no need to increase the image size. The change was for qemu_arm_vexpress_defconfig instead (notice the name of the defconfig used in gitlab). This reverts commit cb62a8e0a2b88b6c1b3ffe74e9eb370bf686fa62. Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* board/qemu/ppc-mpc8544ds: apply Debian patch fixing wrong mcpuGravatar Romain Naour2020-11-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | When building the linux kernel for PPC_85xx cpus with GCC 8, the build fail with: powerpc-e500v2-linux-gnuspe-gcc: error: unrecognized argument in option '-mcpu=powerpc' powerpc-e500v2-linux-gnuspe-gcc: note: valid arguments to '-mcpu=' are: 8540 8548 native "GCC started treating "PowerPC" and "PowerPC SPE" as two different architectures and that's the reason for the reduced -mcpu list." [1] As suggested in the crosstool-ng issue [1], apply the Debian patch to avoid -mcpu=powerpc or -mcpu=powerpc64. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/830981654 [1] https://github.com/crosstool-ng/crosstool-ng/issues/1152 [2] https://salsa.debian.org/kernel-team/linux/-/blob/buster/debian/patches/bugfix/powerpc/powerpc-fix-mcpu-options-for-spe-only-compiler.patch Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/mx6udoo: select host-openssl for the Linux kernel buildGravatar Fabio Estevam2020-11-071-0/+1
| | | | | | | | | | | | | | | | Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following build error: scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory #include <openssl/bio.h> Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/831421064 Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com> Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/mx6sx_udoo_neo: select host-openssl for the Linux kernel buildGravatar Fabio Estevam2020-11-071-0/+1
| | | | | | | | | | | | | | | | Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following build error: scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory #include <openssl/bio.h> Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/831421063 Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com> Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/rock_pi_n8: use Python 3.x for U-Boot buildGravatar Marcin Niestroj2020-11-071-0/+1
| | | | | | | | | | | New U-Boot versions (such as 2020.07 being used) need Python 3.x for pylibfdt. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421210 Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/orangepi_pc: use Python 3.x for U-Boot buildGravatar Marcin Niestroj2020-11-071-0/+1
| | | | | | | | | | | New U-Boot versions (such as 2020.07 being used) need Python 3.x for pylibfdt. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421100 Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/orangepi_zero_plus: use Python 3.x for U-Boot buildGravatar Marcin Niestroj2020-11-071-0/+1
| | | | | | | | | | | New U-Boot versions (such as 2020.10 being used) need Python 3.x for pylibfdt. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421115 Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* board: add Orangepi Zero Plus supportGravatar Marcin Niestroj2020-11-031-0/+51
| | | | | | | | | | | | | | | Add initial support for Orangepi Zero Plus board: - U-Boot 2020.10 - Linux 5.7.19 - Default packages from buildroot This patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2). Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* configs/qemu_arm_vexpress_tz_defconfig: enable C++ in toolchainGravatar Etienne Carriere2020-10-311-0/+3
| | | | | | | | | As we are about to bump the optee-test package to 3.11.0, which requires C++ support, let's enable C++ support in the qemu_arm_vexpress_tz_defconfig, which uses optee-test. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* configs/raspberrypi*: bump kernel version to ff93994 (5.4.72)Gravatar Peter Seiderer2020-10-249-9/+9
| | | | | | | Now based on 5.4.72 (from 5.4.61) Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>