aboutsummaryrefslogtreecommitdiff
path: root/board/avnet/microzed/readme.txt
blob: 927e97a32c279c2fec144c2535a2f41573142430 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
This is the buildroot board support for the Avnet Microzed. The Microzed is
a development board based on the Xilinx Zynq-7000 based All-Programmable
System-On-Chip.

Microzed information including schematics, reference designs, and manuals are
available from http://www.zedboard.org .

Steps to create a working system for Microzed:

1) make zynq_microzed_defconfig
2) make
2) make
3) All needed files will be available in the output/images directory.
   Create a FAT32 partition at the beginning of your SD Card and copy files:
     - boot.bin
     - u-boot.img
     - uImage
     - uramdisk.image.gz (should be renamed from rootfs.cpio.uboot)
     - devicetree.dtb (should be renamed from zynq-zed.dtb)
   into your SD card
4) boot your Microzed

Note th at the DTB (zynq-zed.dtb) is the same as the one used for the
Zedboard, and that this is the recommended solution, see
https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.

You can alter the booting procedure by creating a file uEnv.txt
in the root of the SD card. It is a plain text file in format
<key>=<value> one per line:

kernel_image=myimage
modeboot=myboot
myboot=...