aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGravatar Denys Vlasenko <vda.linux@googlemail.com>2017-07-21 09:50:55 +0200
committerGravatar Denys Vlasenko <vda.linux@googlemail.com>2017-07-21 09:50:55 +0200
commit72089cf6b4a77214ec4fd21d5ee5bf56958781cb (patch)
treea5cd9d8f47e909834d3dbc44f895556e68bcf18f
parent75d151e31d135ebab083307ded4e9b98970baa75 (diff)
downloadbusybox-72089cf6b4a77214ec4fd21d5ee5bf56958781cb.tar.gz
busybox-72089cf6b4a77214ec4fd21d5ee5bf56958781cb.tar.bz2
config: deindent all help texts
Those two spaces after tab have no effect, and always a nuisance when editing. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-rw-r--r--Config.in618
-rw-r--r--archival/Config.src4
-rw-r--r--archival/ar.c20
-rw-r--r--archival/bbunzip.c50
-rw-r--r--archival/bzip2.c20
-rw-r--r--archival/cpio.c20
-rw-r--r--archival/dpkg.c8
-rw-r--r--archival/dpkg_deb.c8
-rw-r--r--archival/gzip.c28
-rw-r--r--archival/lzop.c12
-rw-r--r--archival/rpm.c2
-rw-r--r--archival/rpm2cpio.c2
-rw-r--r--archival/tar.c44
-rw-r--r--archival/unzip.c16
-rw-r--r--console-tools/chvt.c4
-rw-r--r--console-tools/clear.c2
-rw-r--r--console-tools/deallocvt.c2
-rw-r--r--console-tools/dumpkmap.c4
-rw-r--r--console-tools/fgconsole.c2
-rw-r--r--console-tools/kbd_mode.c2
-rw-r--r--console-tools/loadfont.c10
-rw-r--r--console-tools/loadkmap.c4
-rw-r--r--console-tools/openvt.c4
-rw-r--r--console-tools/reset.c4
-rw-r--r--console-tools/resize.c12
-rw-r--r--console-tools/setconsole.c4
-rw-r--r--console-tools/setkeycodes.c4
-rw-r--r--console-tools/setlogcons.c2
-rw-r--r--console-tools/showkey.c2
-rw-r--r--coreutils/Config.src10
-rw-r--r--coreutils/basename.c6
-rw-r--r--coreutils/cat.c8
-rw-r--r--coreutils/chgrp.c2
-rw-r--r--coreutils/chmod.c2
-rw-r--r--coreutils/chown.c4
-rw-r--r--coreutils/chroot.c4
-rw-r--r--coreutils/cksum.c2
-rw-r--r--coreutils/comm.c4
-rw-r--r--coreutils/cp.c6
-rw-r--r--coreutils/cut.c4
-rw-r--r--coreutils/date.c28
-rw-r--r--coreutils/dd.c30
-rw-r--r--coreutils/df.c10
-rw-r--r--coreutils/dirname.c4
-rw-r--r--coreutils/dos2unix.c8
-rw-r--r--coreutils/du.c6
-rw-r--r--coreutils/echo.c2
-rw-r--r--coreutils/env.c6
-rw-r--r--coreutils/expand.c4
-rw-r--r--coreutils/expr.c10
-rw-r--r--coreutils/factor.c2
-rw-r--r--coreutils/false.c2
-rw-r--r--coreutils/fold.c2
-rw-r--r--coreutils/fsync.c2
-rw-r--r--coreutils/head.c4
-rw-r--r--coreutils/hostid.c4
-rw-r--r--coreutils/id.c4
-rw-r--r--coreutils/install.c2
-rw-r--r--coreutils/link.c2
-rw-r--r--coreutils/ln.c2
-rw-r--r--coreutils/logname.c2
-rw-r--r--coreutils/ls.c20
-rw-r--r--coreutils/md5_sha1_sum.c16
-rw-r--r--coreutils/mkdir.c2
-rw-r--r--coreutils/mkfifo.c4
-rw-r--r--coreutils/mknod.c4
-rw-r--r--coreutils/mktemp.c2
-rw-r--r--coreutils/mv.c2
-rw-r--r--coreutils/nice.c2
-rw-r--r--coreutils/nl.c2
-rw-r--r--coreutils/nohup.c2
-rw-r--r--coreutils/nproc.c2
-rw-r--r--coreutils/od.c2
-rw-r--r--coreutils/paste.c4
-rw-r--r--coreutils/printenv.c2
-rw-r--r--coreutils/printf.c4
-rw-r--r--coreutils/pwd.c2
-rw-r--r--coreutils/readlink.c6
-rw-r--r--coreutils/realpath.c4
-rw-r--r--coreutils/rm.c2
-rw-r--r--coreutils/rmdir.c6
-rw-r--r--coreutils/seq.c2
-rw-r--r--coreutils/shred.c2
-rw-r--r--coreutils/shuf.c2
-rw-r--r--coreutils/sleep.c22
-rw-r--r--coreutils/sort.c12
-rw-r--r--coreutils/split.c8
-rw-r--r--coreutils/stat.c12
-rw-r--r--coreutils/stty.c2
-rw-r--r--coreutils/sum.c2
-rw-r--r--coreutils/sync.c6
-rw-r--r--coreutils/tac.c2
-rw-r--r--coreutils/tail.c16
-rw-r--r--coreutils/tee.c6
-rw-r--r--coreutils/test.c12
-rw-r--r--coreutils/timeout.c4
-rw-r--r--coreutils/touch.c10
-rw-r--r--coreutils/tr.c18
-rw-r--r--coreutils/true.c2
-rw-r--r--coreutils/truncate.c4
-rw-r--r--coreutils/tty.c4
-rw-r--r--coreutils/uname.c8
-rw-r--r--coreutils/uniq.c2
-rw-r--r--coreutils/unlink.c2
-rw-r--r--coreutils/usleep.c2
-rw-r--r--coreutils/uudecode.c4
-rw-r--r--coreutils/uuencode.c2
-rw-r--r--coreutils/wc.c6
-rw-r--r--coreutils/who.c30
-rw-r--r--coreutils/whoami.c4
-rw-r--r--coreutils/yes.c4
-rw-r--r--debianutils/pipe_progress.c2
-rw-r--r--debianutils/run_parts.c20
-rw-r--r--debianutils/start_stop_daemon.c12
-rw-r--r--debianutils/which.c4
-rw-r--r--e2fsprogs/chattr.c2
-rw-r--r--e2fsprogs/fsck.c6
-rw-r--r--e2fsprogs/lsattr.c2
-rw-r--r--e2fsprogs/tune2fs.c4
-rw-r--r--editors/Config.src4
-rw-r--r--editors/awk.c18
-rw-r--r--editors/cmp.c4
-rw-r--r--editors/diff.c10
-rw-r--r--editors/ed.c6
-rw-r--r--editors/patch.c2
-rw-r--r--editors/sed.c4
-rw-r--r--editors/vi.c82
-rw-r--r--findutils/find.c66
-rw-r--r--findutils/grep.c12
-rw-r--r--findutils/xargs.c22
-rw-r--r--init/bootchartd.c42
-rw-r--r--init/halt.c20
-rw-r--r--init/init.c86
-rw-r--r--libbb/Config.src286
-rw-r--r--libbb/common_bufsiz.c46
-rw-r--r--libbb/parse_config.c2
-rw-r--r--libbb/u_signal_names.c4
-rw-r--r--loginutils/Config.src104
-rw-r--r--loginutils/add-remove-shell.c16
-rw-r--r--loginutils/addgroup.c8
-rw-r--r--loginutils/adduser.c20
-rw-r--r--loginutils/chpasswd.c6
-rw-r--r--loginutils/cryptpw.c10
-rw-r--r--loginutils/deluser.c8
-rw-r--r--loginutils/getty.c22
-rw-r--r--loginutils/login.c30
-rw-r--r--loginutils/passwd.c14
-rw-r--r--loginutils/su.c8
-rw-r--r--loginutils/sulogin.c4
-rw-r--r--loginutils/vlock.c6
-rw-r--r--mailutils/Config.src2
-rw-r--r--mailutils/makemime.c2
-rw-r--r--mailutils/popmaildir.c12
-rw-r--r--mailutils/reformime.c6
-rw-r--r--mailutils/sendmail.c2
-rw-r--r--miscutils/adjtimex.c4
-rw-r--r--miscutils/bbconfig.c18
-rw-r--r--miscutils/beep.c6
-rw-r--r--miscutils/chat.c40
-rw-r--r--miscutils/conspy.c8
-rw-r--r--miscutils/crond.c40
-rw-r--r--miscutils/crontab.c8
-rw-r--r--miscutils/dc.c8
-rw-r--r--miscutils/devfsd.c45
-rw-r--r--miscutils/devmem.c4
-rw-r--r--miscutils/fbsplash.c16
-rw-r--r--miscutils/flash_eraseall.c4
-rw-r--r--miscutils/flash_lock_unlock.c8
-rw-r--r--miscutils/flashcp.c4
-rw-r--r--miscutils/hdparm.c32
-rw-r--r--miscutils/i2c_tools.c8
-rw-r--r--miscutils/inotifyd.c4
-rw-r--r--miscutils/less.c36
-rw-r--r--miscutils/lsscsi.c6
-rw-r--r--miscutils/makedevs.c22
-rw-r--r--miscutils/man.c2
-rw-r--r--miscutils/microcom.c2
-rw-r--r--miscutils/mt.c6
-rw-r--r--miscutils/nandwrite.c4
-rw-r--r--miscutils/partprobe.c2
-rw-r--r--miscutils/raidautorun.c4
-rw-r--r--miscutils/readahead.c18
-rw-r--r--miscutils/rfkill.c10
-rw-r--r--miscutils/runlevel.c6
-rw-r--r--miscutils/rx.c2
-rw-r--r--miscutils/setserial.c2
-rw-r--r--miscutils/strings.c4
-rw-r--r--miscutils/time.c6
-rw-r--r--miscutils/ttysize.c8
-rw-r--r--miscutils/ubi_tools.c12
-rw-r--r--miscutils/ubirename.c2
-rw-r--r--miscutils/volname.c2
-rw-r--r--miscutils/watchdog.c12
-rw-r--r--modutils/Config.src150
-rw-r--r--modutils/depmod.c6
-rw-r--r--modutils/insmod.c2
-rw-r--r--modutils/lsmod.c8
-rw-r--r--modutils/modinfo.c2
-rw-r--r--modutils/modprobe.c14
-rw-r--r--modutils/rmmod.c2
-rw-r--r--networking/Config.src42
-rw-r--r--networking/arp.c2
-rw-r--r--networking/arping.c2
-rw-r--r--networking/brctl.c18
-rw-r--r--networking/dnsd.c2
-rw-r--r--networking/ether-wake.c2
-rw-r--r--networking/ftpd.c16
-rw-r--r--networking/ftpgetput.c4
-rw-r--r--networking/hostname.c4
-rw-r--r--networking/httpd.c96
-rw-r--r--networking/ifconfig.c24
-rw-r--r--networking/ifenslave.c4
-rw-r--r--networking/ifplugd.c2
-rw-r--r--networking/ifupdown.c64
-rw-r--r--networking/inetd.c14
-rw-r--r--networking/ip.c40
-rw-r--r--networking/ipcalc.c8
-rw-r--r--networking/isrv_identd.c4
-rw-r--r--networking/nameif.c34
-rw-r--r--networking/nbd-client.c2
-rw-r--r--networking/nc.c20
-rw-r--r--networking/netstat.c10
-rw-r--r--networking/nslookup.c2
-rw-r--r--networking/ntpd.c10
-rw-r--r--networking/ping.c10
-rw-r--r--networking/pscan.c2
-rw-r--r--networking/route.c2
-rw-r--r--networking/slattach.c4
-rw-r--r--networking/ssl_client.c2
-rw-r--r--networking/tcpudp.c8
-rw-r--r--networking/telnet.c18
-rw-r--r--networking/telnetd.c58
-rw-r--r--networking/tftp.c40
-rw-r--r--networking/traceroute.c8
-rw-r--r--networking/tunctl.c6
-rw-r--r--networking/udhcp/Config.src128
-rw-r--r--networking/udhcp/d6_dhcpc.c14
-rw-r--r--networking/vconfig.c2
-rw-r--r--networking/wget.c120
-rw-r--r--networking/whois.c2
-rw-r--r--networking/zcip.c10
-rw-r--r--printutils/lpd.c2
-rw-r--r--printutils/lpr.c4
-rw-r--r--procps/Config.src4
-rw-r--r--procps/free.c6
-rw-r--r--procps/fuser.c6
-rw-r--r--procps/iostat.c2
-rw-r--r--procps/kill.c20
-rw-r--r--procps/lsof.c4
-rw-r--r--procps/mpstat.c2
-rw-r--r--procps/nmeter.c2
-rw-r--r--procps/pgrep.c4
-rw-r--r--procps/pidof.c12
-rw-r--r--procps/pmap.c8
-rw-r--r--procps/powertop.c6
-rw-r--r--procps/ps.c16
-rw-r--r--procps/pstree.c2
-rw-r--r--procps/pwdx.c2
-rw-r--r--procps/smemcap.c4
-rw-r--r--procps/sysctl.c2
-rw-r--r--procps/top.c30
-rw-r--r--procps/uptime.c8
-rw-r--r--procps/watch.c4
-rw-r--r--runit/chpst.c14
-rw-r--r--runit/runsv.c4
-rw-r--r--runit/runsvdir.c12
-rw-r--r--runit/sv.c12
-rw-r--r--runit/svlogd.c6
-rw-r--r--selinux/chcon.c2
-rw-r--r--selinux/getenforce.c2
-rw-r--r--selinux/getsebool.c2
-rw-r--r--selinux/load_policy.c2
-rw-r--r--selinux/matchpathcon.c4
-rw-r--r--selinux/runcon.c2
-rw-r--r--selinux/selinuxenabled.c4
-rw-r--r--selinux/sestatus.c2
-rw-r--r--selinux/setenforce.c2
-rw-r--r--selinux/setfiles.c16
-rw-r--r--selinux/setsebool.c4
-rw-r--r--shell/Config.src124
-rw-r--r--shell/ash.c50
-rw-r--r--shell/cttyhack.c54
-rw-r--r--shell/hush.c54
-rw-r--r--sysklogd/klogd.c26
-rw-r--r--sysklogd/logger.c8
-rw-r--r--sysklogd/logread.c18
-rw-r--r--sysklogd/syslogd.c82
-rw-r--r--util-linux/Config.src60
-rw-r--r--util-linux/acpid.c18
-rw-r--r--util-linux/blkdiscard.c2
-rw-r--r--util-linux/blkid.c8
-rw-r--r--util-linux/blockdev.c2
-rw-r--r--util-linux/cal.c2
-rw-r--r--util-linux/chrt.c4
-rw-r--r--util-linux/dmesg.c40
-rw-r--r--util-linux/eject.c6
-rw-r--r--util-linux/fallocate.c2
-rw-r--r--util-linux/fatattr.c2
-rw-r--r--util-linux/fbset.c22
-rw-r--r--util-linux/fdformat.c2
-rw-r--r--util-linux/fdisk.c42
-rw-r--r--util-linux/findfs.c6
-rw-r--r--util-linux/flock.c2
-rw-r--r--util-linux/freeramdisk.c26
-rw-r--r--util-linux/fsck_minix.c12
-rw-r--r--util-linux/fsfreeze.c2
-rw-r--r--util-linux/fstrim.c2
-rw-r--r--util-linux/getopt.c14
-rw-r--r--util-linux/hexdump.c14
-rw-r--r--util-linux/hexdump_xxd.c4
-rw-r--r--util-linux/hwclock.c18
-rw-r--r--util-linux/ionice.c4
-rw-r--r--util-linux/ipcrm.c6
-rw-r--r--util-linux/ipcs.c4
-rw-r--r--util-linux/last.c6
-rw-r--r--util-linux/losetup.c6
-rw-r--r--util-linux/lspci.c6
-rw-r--r--util-linux/lsusb.c6
-rw-r--r--util-linux/mdev.c34
-rw-r--r--util-linux/mesg.c14
-rw-r--r--util-linux/mkfs_ext2.c4
-rw-r--r--util-linux/mkfs_minix.c12
-rw-r--r--util-linux/mkfs_reiser.c4
-rw-r--r--util-linux/mkfs_vfat.c4
-rw-r--r--util-linux/mkswap.c18
-rw-r--r--util-linux/more.c10
-rw-r--r--util-linux/mount.c62
-rw-r--r--util-linux/mountpoint.c2
-rw-r--r--util-linux/nsenter.c6
-rw-r--r--util-linux/pivot_root.c12
-rw-r--r--util-linux/rdate.c8
-rw-r--r--util-linux/rdev.c2
-rw-r--r--util-linux/readprofile.c2
-rw-r--r--util-linux/renice.c4
-rw-r--r--util-linux/rev.c2
-rw-r--r--util-linux/rtcwake.c2
-rw-r--r--util-linux/script.c2
-rw-r--r--util-linux/scriptreplay.c4
-rw-r--r--util-linux/setarch.c12
-rw-r--r--util-linux/setpriv.c24
-rw-r--r--util-linux/setsid.c2
-rw-r--r--util-linux/swaponoff.c18
-rw-r--r--util-linux/switch_root.c24
-rw-r--r--util-linux/taskset.c10
-rw-r--r--util-linux/uevent.c4
-rw-r--r--util-linux/umount.c10
-rw-r--r--util-linux/unshare.c2
-rw-r--r--util-linux/volume_id/exfat.c6
-rw-r--r--util-linux/volume_id/f2fs.c8
-rw-r--r--util-linux/volume_id/nilfs.c18
-rw-r--r--util-linux/volume_id/squashfs.c8
-rw-r--r--util-linux/volume_id/ubifs.c4
-rw-r--r--util-linux/wall.c2
353 files changed, 2643 insertions, 2644 deletions
diff --git a/Config.in b/Config.in
index cf72287be..c1cc591f3 100644
--- a/Config.in
+++ b/Config.in
@@ -15,314 +15,314 @@ config DESKTOP
bool "Enable compatibility for full-blown desktop systems"
default y
help
- Enable applet options and features which are not essential.
- Many applet options have dedicated config options to (de)select them
- under that applet; this options enables those options which have no
- individual config item for them.
+ Enable applet options and features which are not essential.
+ Many applet options have dedicated config options to (de)select them
+ under that applet; this options enables those options which have no
+ individual config item for them.
- Select this if you plan to use busybox on full-blown desktop machine
- with common Linux distro, which needs higher level of command-line
- compatibility.
+ Select this if you plan to use busybox on full-blown desktop machine
+ with common Linux distro, which needs higher level of command-line
+ compatibility.
- If you are preparing your build to be used on an embedded box
- where you have tighter control over the entire set of userspace
- tools, you can unselect this option for smaller code size.
+ If you are preparing your build to be used on an embedded box
+ where you have tighter control over the entire set of userspace
+ tools, you can unselect this option for smaller code size.
config EXTRA_COMPAT
bool "Provide compatible behavior for rare corner cases (bigger code)"
default n
help
- This option makes grep, sed etc handle rare corner cases
- (embedded NUL bytes and such). This makes code bigger and uses
- some GNU extensions in libc. You probably only need this option
- if you plan to run busybox on desktop.
+ This option makes grep, sed etc handle rare corner cases
+ (embedded NUL bytes and such). This makes code bigger and uses
+ some GNU extensions in libc. You probably only need this option
+ if you plan to run busybox on desktop.
config INCLUDE_SUSv2
bool "Enable obsolete features removed before SUSv3"
default y
help
- This option will enable backwards compatibility with SuSv2,
- specifically, old-style numeric options ('command -1 <file>')
- will be supported in head, tail, and fold. (Note: should
- affect renice too.)
+ This option will enable backwards compatibility with SuSv2,
+ specifically, old-style numeric options ('command -1 <file>')
+ will be supported in head, tail, and fold. (Note: should
+ affect renice too.)
config LONG_OPTS
bool "Support --long-options"
default y
help
- Enable this if you want busybox applets to use the gnu --long-option
- style, in addition to single character -a -b -c style options.
+ Enable this if you want busybox applets to use the gnu --long-option
+ style, in addition to single character -a -b -c style options.
config SHOW_USAGE
bool "Show applet usage messages"
default y
help
- Enabling this option, BusyBox applets will show terse help messages
- when invoked with wrong arguments.
- If you do not want to show any (helpful) usage message when
- issuing wrong command syntax, you can say 'N' here,
- saving approximately 7k.
+ Enabling this option, BusyBox applets will show terse help messages
+ when invoked with wrong arguments.
+ If you do not want to show any (helpful) usage message when
+ issuing wrong command syntax, you can say 'N' here,
+ saving approximately 7k.
config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
default y
depends on SHOW_USAGE
help
- All BusyBox applets will show verbose help messages when
- busybox is invoked with --help. This will add a lot of text to the
- busybox binary. In the default configuration, this will add about
- 13k, but it can add much more depending on your configuration.
+ All BusyBox applets will show verbose help messages when
+ busybox is invoked with --help. This will add a lot of text to the
+ busybox binary. In the default configuration, this will add about
+ 13k, but it can add much more depending on your configuration.
config FEATURE_COMPRESS_USAGE
bool "Store applet usage messages in compressed form"
default y
depends on SHOW_USAGE
help
- Store usage messages in .bz compressed form, uncompress them
- on-the-fly when <applet> --help is called.
+ Store usage messages in .bz compressed form, uncompress them
+ on-the-fly when <applet> --help is called.
- If you have a really tiny busybox with few applets enabled (and
- bunzip2 isn't one of them), the overhead of the decompressor might
- be noticeable. Also, if you run executables directly from ROM
- and have very little memory, this might not be a win. Otherwise,
- you probably want this.
+ If you have a really tiny busybox with few applets enabled (and
+ bunzip2 isn't one of them), the overhead of the decompressor might
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
+ you probably want this.
config LFS
bool "Support files > 2 GB"
default y
help
- If you want to build BusyBox with large file support, then enable
- this option. This will have no effect if your kernel or your C
- library lacks large file support for large files. Some of the
- programs that can benefit from large file support include dd, gzip,
- cp, mount, tar, and many others. If you want to access files larger
- than 2 Gigabytes, enable this option.
+ If you want to build BusyBox with large file support, then enable
+ this option. This will have no effect if your kernel or your C
+ library lacks large file support for large files. Some of the
+ programs that can benefit from large file support include dd, gzip,
+ cp, mount, tar, and many others. If you want to access files larger
+ than 2 Gigabytes, enable this option.
config PAM
bool "Support PAM (Pluggable Authentication Modules)"
default n
help
- Use PAM in some busybox applets (currently login and httpd) instead
- of direct access to password database.
+ Use PAM in some busybox applets (currently login and httpd) instead
+ of direct access to password database.
config FEATURE_DEVPTS
bool "Use the devpts filesystem for Unix98 PTYs"
default y
help
- Enable if you want BusyBox to use Unix98 PTY support. If enabled,
- busybox will use /dev/ptmx for the master side of the pseudoterminal
- and /dev/pts/<number> for the slave side. Otherwise, BSD style
- /dev/ttyp<number> will be used. To use this option, you should have
- devpts mounted.
+ Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+ busybox will use /dev/ptmx for the master side of the pseudoterminal
+ and /dev/pts/<number> for the slave side. Otherwise, BSD style
+ /dev/ttyp<number> will be used. To use this option, you should have
+ devpts mounted.
config FEATURE_UTMP
bool "Support utmp file"
default y
help
- The file /var/run/utmp is used to track who is currently logged in.
- With this option on, certain applets (getty, login, telnetd etc)
- will create and delete entries there.
- "who" applet requires this option.
+ The file /var/run/utmp is used to track who is currently logged in.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will create and delete entries there.
+ "who" applet requires this option.
config FEATURE_WTMP
bool "Support wtmp file"
default y
depends on FEATURE_UTMP
help
- The file /var/run/wtmp is used to track when users have logged into
- and logged out of the system.
- With this option on, certain applets (getty, login, telnetd etc)
- will append new entries there.
- "last" applet requires this option.
+ The file /var/run/wtmp is used to track when users have logged into
+ and logged out of the system.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will append new entries there.
+ "last" applet requires this option.
config FEATURE_PIDFILE
bool "Support writing pidfiles"
default y
help
- This option makes some applets (e.g. crond, syslogd, inetd) write
- a pidfile at the configured PID_FILE_PATH. It has no effect
- on applets which require pidfiles to run.
+ This option makes some applets (e.g. crond, syslogd, inetd) write
+ a pidfile at the configured PID_FILE_PATH. It has no effect
+ on applets which require pidfiles to run.
config PID_FILE_PATH
string "Directory for pidfiles"
default "/var/run"
depends on FEATURE_PIDFILE
help
- This is the default path where pidfiles are created. Applets which
- allow you to set the pidfile path on the command line will override
- this value. The option has no effect on applets that require you to
- specify a pidfile path.
+ This is the default path where pidfiles are created. Applets which
+ allow you to set the pidfile path on the command line will override
+ this value. The option has no effect on applets that require you to
+ specify a pidfile path.
config BUSYBOX
bool "Include busybox applet"
default y
help
- The busybox applet provides general help regarding busybox and
- allows the included applets to be listed. It's also required
- if applet links are to be installed at runtime. If you unselect
- this option, running busybox without any arguments will give
- just a cryptic error message:
+ The busybox applet provides general help regarding busybox and
+ allows the included applets to be listed. It's also required
+ if applet links are to be installed at runtime. If you unselect
+ this option, running busybox without any arguments will give
+ just a cryptic error message:
- $ busybox
- busybox: applet not found
+ $ busybox
+ busybox: applet not found
- Running "busybox APPLET [ARGS...]" will still work, of course.
+ Running "busybox APPLET [ARGS...]" will still work, of course.
config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
default y
depends on BUSYBOX
help
- Enable 'busybox --install [-s]' support. This will allow you to use
- busybox at runtime to create hard links or symlinks for all the
- applets that are compiled into busybox.
+ Enable 'busybox --install [-s]' support. This will allow you to use
+ busybox at runtime to create hard links or symlinks for all the
+ applets that are compiled into busybox.
config INSTALL_NO_USR
bool "Don't use /usr"
default n
help
- Disable use of /usr. busybox --install and "make install"
- will install applets only to /bin and /sbin,
- never to /usr/bin or /usr/sbin.
+ Disable use of /usr. busybox --install and "make install"
+ will install applets only to /bin and /sbin,
+ never to /usr/bin or /usr/sbin.
config FEATURE_SUID
bool "Drop SUID state for most applets"
default y
help
- With this option you can install the busybox binary belonging
- to root with the suid bit set, enabling some applets to perform
- root-level operations even when run by ordinary users
- (for example, mounting of user mounts in fstab needs this).
+ With this option you can install the busybox binary belonging
+ to root with the suid bit set, enabling some applets to perform
+ root-level operations even when run by ordinary users
+ (for example, mounting of user mounts in fstab needs this).
- With this option enabled, Busybox drops privileges for applets
- that don't need root access, before entering their main() function.
+ With this option enabled, Busybox drops privileges for applets
+ that don't need root access, before entering their main() function.
- If you are really paranoid and don't want even initial busybox code
- to run under root for evey applet, build two busybox binaries with
- different applets in them (and the appropriate symlinks pointing
- to each binary), and only set the suid bit on the one that needs it.
+ If you are really paranoid and don't want even initial busybox code
+ to run under root for evey applet, build two busybox binaries with
+ different applets in them (and the appropriate symlinks pointing
+ to each binary), and only set the suid bit on the one that needs it.
- Some applets which require root rights (need suid bit on the binary
- or to be run by root) and will refuse to execute otherwise:
- crontab, login, passwd, su, vlock, wall.
+ Some applets which require root rights (need suid bit on the binary
+ or to be run by root) and will refuse to execute otherwise:
+ crontab, login, passwd, su, vlock, wall.
- The applets which will use root rights if they have them
- (via suid bit, or because run by root), but would try to work
- without root right nevertheless:
- findfs, ping[6], traceroute[6], mount.
+ The applets which will use root rights if they have them
+ (via suid bit, or because run by root), but would try to work
+ without root right nevertheless:
+ findfs, ping[6], traceroute[6], mount.
- Note that if you DO NOT select this option, but DO make busybox
- suid root, ALL applets will run under root, which is a huge
- security hole (think "cp /some/file /etc/passwd").
+ Note that if you DO NOT select this option, but DO make busybox
+ suid root, ALL applets will run under root, which is a huge
+ security hole (think "cp /some/file /etc/passwd").
config FEATURE_SUID_CONFIG
bool "Enable SUID configuration via /etc/busybox.conf"
default y
depends on FEATURE_SUID
help
- Allow the SUID/SGID state of an applet to be determined at runtime
- by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
- The format of this file is as follows:
-
- APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
-
- s: USER or GROUP is allowed to execute APPLET.
- APPLET will run under USER or GROUP
- (reagardless of who's running it).
- S: USER or GROUP is NOT allowed to execute APPLET.
- APPLET will run under USER or GROUP.
- This option is not very sensical.
- x: USER/GROUP/others are allowed to execute APPLET.
- No UID/GID change will be done when it is run.
- -: USER/GROUP/others are not allowed to execute APPLET.
-
- An example might help:
-
- [SUID]
- su = ssx root.0 # applet su can be run by anyone and runs with
- # euid=0,egid=0
- su = ssx # exactly the same
-
- mount = sx- root.disk # applet mount can be run by root and members
- # of group disk (but not anyone else)
- # and runs with euid=0 (egid is not changed)
-
- cp = --- # disable applet cp for everyone
-
- The file has to be owned by user root, group root and has to be
- writeable only by root:
- (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
- The busybox executable has to be owned by user root, group
- root and has to be setuid root for this to work:
- (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
-
- Robert 'sandman' Griebl has more information here:
- <url: http://www.softforge.de/bb/suid.html >.
+ Allow the SUID/SGID state of an applet to be determined at runtime
+ by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+ The format of this file is as follows:
+
+ APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
+
+ s: USER or GROUP is allowed to execute APPLET.
+ APPLET will run under USER or GROUP
+ (regardless of who's running it).
+ S: USER or GROUP is NOT allowed to execute APPLET.
+ APPLET will run under USER or GROUP.
+ This option is not very sensical.
+ x: USER/GROUP/others are allowed to execute APPLET.
+ No UID/GID change will be done when it is run.
+ -: USER/GROUP/others are not allowed to execute APPLET.
+
+ An example might help:
+
+ |[SUID]
+ |su = ssx root.0 # applet su can be run by anyone and runs with
+ | # euid=0,egid=0
+ |su = ssx # exactly the same
+ |
+ |mount = sx- root.disk # applet mount can be run by root and members
+ | # of group disk (but not anyone else)
+ | # and runs with euid=0 (egid is not changed)
+ |
+ |cp = --- # disable applet cp for everyone
+
+ The file has to be owned by user root, group root and has to be
+ writeable only by root:
+ (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+ The busybox executable has to be owned by user root, group
+ root and has to be setuid root for this to work:
+ (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+ Robert 'sandman' Griebl has more information here:
+ <url: http://www.softforge.de/bb/suid.html >.
config FEATURE_SUID_CONFIG_QUIET
bool "Suppress warning message if /etc/busybox.conf is not readable"
default y
depends on FEATURE_SUID_CONFIG
help
- /etc/busybox.conf should be readable by the user needing the SUID,
- check this option to avoid users to be notified about missing
- permissions.
+ /etc/busybox.conf should be readable by the user needing the SUID,
+ check this option to avoid users to be notified about missing
+ permissions.
config FEATURE_PREFER_APPLETS
bool "exec prefers applets"
default n
help
- This is an experimental option which directs applets about to
- call 'exec' to try and find an applicable busybox applet before
- searching the PATH. This is typically done by exec'ing
- /proc/self/exe.
+ This is an experimental option which directs applets about to
+ call 'exec' to try and find an applicable busybox applet before
+ searching the PATH. This is typically done by exec'ing
+ /proc/self/exe.
- This may affect shell, find -exec, xargs and similar applets.
- They will use applets even if /bin/APPLET -> busybox link
- is missing (or is not a link to busybox). However, this causes
- problems in chroot jails without mounted /proc and with ps/top
- (command name can be shown as 'exe' for applets started this way).
+ This may affect shell, find -exec, xargs and similar applets.
+ They will use applets even if /bin/APPLET -> busybox link
+ is missing (or is not a link to busybox). However, this causes
+ problems in chroot jails without mounted /proc and with ps/top
+ (command name can be shown as 'exe' for applets started this way).
config BUSYBOX_EXEC_PATH
string "Path to BusyBox executable"
default "/proc/self/exe"
help
- When Busybox applets need to run other busybox applets, BusyBox
- sometimes needs to exec() itself. When the /proc filesystem is
- mounted, /proc/self/exe always points to the currently running
- executable. If you haven't got /proc, set this to wherever you
- want to run BusyBox from.
+ When Busybox applets need to run other busybox applets, BusyBox
+ sometimes needs to exec() itself. When the /proc filesystem is
+ mounted, /proc/self/exe always points to the currently running
+ executable. If you haven't got /proc, set this to wherever you
+ want to run BusyBox from.
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
select PLATFORM_LINUX
help
- Enable support for SELinux in applets ls, ps, and id. Also provide
- the option of compiling in SELinux applets.
+ Enable support for SELinux in applets ls, ps, and id. Also provide
+ the option of compiling in SELinux applets.
- If you do not have a complete SELinux userland installed, this stuff
- will not compile. Specifially, libselinux 1.28 or better is
- directly required by busybox. If the installation is located in a
- non-standard directory, provide it by invoking make as follows:
+ If you do not have a complete SELinux userland installed, this stuff
+ will not compile. Specifially, libselinux 1.28 or better is
+ directly required by busybox. If the installation is located in a
+ non-standard directory, provide it by invoking make as follows:
CFLAGS=-I<libselinux-include-path> \
LDFLAGS=-L<libselinux-lib-path> \
make
- Most people will leave this set to 'N'.
+ Most people will leave this set to 'N'.
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
- As a size optimization, busybox normally exits without explicitly
- freeing dynamically allocated memory or closing files. This saves
- space since the OS will clean up for us, but it can confuse debuggers
- like valgrind, which report tons of memory and resource leaks.
+ As a size optimization, busybox normally exits without explicitly
+ freeing dynamically allocated memory or closing files. This saves
+ space since the OS will clean up for us, but it can confuse debuggers
+ like valgrind, which report tons of memory and resource leaks.
- Don't enable this unless you have a really good reason to clean
- things up manually.
+ Don't enable this unless you have a really good reason to clean
+ things up manually.
# These are auto-selected by other options
@@ -330,26 +330,26 @@ config FEATURE_SYSLOG
bool #No description makes it a hidden option
default n
#help
- # This option is auto-selected when you select any applet which may
- # send its output to syslog. You do not need to select it manually.
+ #This option is auto-selected when you select any applet which may
+ #send its output to syslog. You do not need to select it manually.
config FEATURE_HAVE_RPC
bool #No description makes it a hidden option
default n
#help
- # This is automatically selected if any of enabled applets need it.
- # You do not need to select it manually.
+ #This is automatically selected if any of enabled applets need it.
+ #You do not need to select it manually.
config PLATFORM_LINUX
bool #No description makes it a hidden option
default n
#help
- # For the most part, busybox requires only POSIX compatibility
- # from the target system, but some applets and features use
- # Linux-specific interfaces.
+ #For the most part, busybox requires only POSIX compatibility
+ #from the target system, but some applets and features use
+ #Linux-specific interfaces.
#
- # This is automatically selected if any applet or feature requires
- # Linux-specific interfaces. You do not need to select it manually.
+ #This is automatically selected if any applet or feature requires
+ #Linux-specific interfaces. You do not need to select it manually.
comment 'Build Options'
@@ -357,37 +357,37 @@ config STATIC
bool "Build BusyBox as a static binary (no shared libs)"
default n
help
- If you want to build a static BusyBox binary, which does not
- use or require any shared libraries, then enable this option.
- This can cause BusyBox to be considerably larger, so you should
- leave this option false unless you have a good reason (i.e.
- your target platform does not support shared libraries, or
- you are building an initrd which doesn't need anything but
- BusyBox, etc).
+ If you want to build a static BusyBox binary, which does not
+ use or require any shared libraries, then enable this option.
+ This can cause BusyBox to be considerably larger, so you should
+ leave this option false unless you have a good reason (i.e.
+ your target platform does not support shared libraries, or
+ you are building an initrd which doesn't need anything but
+ BusyBox, etc).
- Most people will leave this set to 'N'.
+ Most people will leave this set to 'N'.
config PIE
bool "Build BusyBox as a position independent executable"
default n
depends on !STATIC
help
- Hardened code option. PIE binaries are loaded at a different
- address at each invocation. This has some overhead,
- particularly on x86-32 which is short on registers.
+ Hardened code option. PIE binaries are loaded at a different
+ address at each invocation. This has some overhead,
+ particularly on x86-32 which is short on registers.
- Most people will leave this set to 'N'.
+ Most people will leave this set to 'N'.
config NOMMU
bool "Force NOMMU build"
default n
help
- Busybox tries to detect whether architecture it is being
- built against supports MMU or not. If this detection fails,
- or if you want to build NOMMU version of busybox for testing,
- you may force NOMMU build here.
+ Busybox tries to detect whether architecture it is being
+ built against supports MMU or not. If this detection fails,
+ or if you want to build NOMMU version of busybox for testing,
+ you may force NOMMU build here.
- Most people will leave this set to 'N'.
+ Most people will leave this set to 'N'.
# PIE can be made to work with BUILD_LIBBUSYBOX, but currently
# build system does not support that
@@ -396,128 +396,128 @@ config BUILD_LIBBUSYBOX
default n
depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
help
- Build a shared library libbusybox.so.N.N.N which contains all
- busybox code.
+ Build a shared library libbusybox.so.N.N.N which contains all
+ busybox code.
- This feature allows every applet to be built as a really tiny
- separate executable linked against the library:
- $ size 0_lib/l*
- text data bss dec hex filename
- 939 212 28 1179 49b 0_lib/last
- 939 212 28 1179 49b 0_lib/less
- 919138 8328 1556 929022 e2cfe 0_lib/libbusybox.so.1.N.M
+ This feature allows every applet to be built as a really tiny
+ separate executable linked against the library:
+ |$ size 0_lib/l*
+ | text data bss dec hex filename
+ | 939 212 28 1179 49b 0_lib/last
+ | 939 212 28 1179 49b 0_lib/less
+ | 919138 8328 1556 929022 e2cfe 0_lib/libbusybox.so.1.N.M
- This is useful on NOMMU systems which are not capable
- of sharing executables, but are capable of sharing code
- in dynamic libraries.
+ This is useful on NOMMU systems which are not capable
+ of sharing executables, but are capable of sharing code
+ in dynamic libraries.
config FEATURE_LIBBUSYBOX_STATIC
bool "Pull in all external references into libbusybox"
default n
depends on BUILD_LIBBUSYBOX
help
- Make libbusybox library independent, not using or requiring
- any other shared libraries.
+ Make libbusybox library independent, not using or requiring
+ any other shared libraries.
config FEATURE_INDIVIDUAL
bool "Produce a binary for each applet, linked against libbusybox"
default y
depends on BUILD_LIBBUSYBOX
help
- If your CPU architecture doesn't allow for sharing text/rodata
- sections of running binaries, but allows for runtime dynamic
- libraries, this option will allow you to reduce memory footprint
- when you have many different applets running at once.
+ If your CPU architecture doesn't allow for sharing text/rodata
+ sections of running binaries, but allows for runtime dynamic
+ libraries, this option will allow you to reduce memory footprint
+ when you have many different applets running at once.
- If your CPU architecture allows for sharing text/rodata,
- having single binary is more optimal.
+ If your CPU architecture allows for sharing text/rodata,
+ having single binary is more optimal.
- Each applet will be a tiny program, dynamically linked
- against libbusybox.so.N.N.N.
+ Each applet will be a tiny program, dynamically linked
+ against libbusybox.so.N.N.N.
- You need to have a working dynamic linker.
+ You need to have a working dynamic linker.
config FEATURE_SHARED_BUSYBOX
bool "Produce additional busybox binary linked against libbusybox"
default y
depends on BUILD_LIBBUSYBOX
help
- Build busybox, dynamically linked against libbusybox.so.N.N.N.
+ Build busybox, dynamically linked against libbusybox.so.N.N.N.
- You need to have a working dynamic linker.
+ You need to have a working dynamic linker.
### config BUILD_AT_ONCE
### bool "Compile all sources at once"
### default n
### help
-### Normally each source-file is compiled with one invocation of
-### the compiler.
-### If you set this option, all sources are compiled at once.
-### This gives the compiler more opportunities to optimize which can
-### result in smaller and/or faster binaries.
+### Normally each source-file is compiled with one invocation of
+### the compiler.
+### If you set this option, all sources are compiled at once.
+### This gives the compiler more opportunities to optimize which can
+### result in smaller and/or faster binaries.
###
-### Setting this option will consume alot of memory, e.g. if you
-### enable all applets with all features, gcc uses more than 300MB
-### RAM during compilation of busybox.
+### Setting this option will consume alot of memory, e.g. if you
+### enable all applets with all features, gcc uses more than 300MB
+### RAM during compilation of busybox.
###
-### This option is most likely only beneficial for newer compilers
-### such as gcc-4.1 and above.
+### This option is most likely only beneficial for newer compilers
+### such as gcc-4.1 and above.
###
-### Say 'N' unless you know what you are doing.
+### Say 'N' unless you know what you are doing.
config CROSS_COMPILER_PREFIX
string "Cross Compiler prefix"
default ""
help
- If you want to build BusyBox with a cross compiler, then you
- will need to set this to the cross-compiler prefix, for example,
- "i386-uclibc-".
+ If you want to build BusyBox with a cross compiler, then you
+ will need to set this to the cross-compiler prefix, for example,
+ "i386-uclibc-".
- Note that CROSS_COMPILE environment variable or
- "make CROSS_COMPILE=xxx ..." will override this selection.
+ Note that CROSS_COMPILE environment variable or
+ "make CROSS_COMPILE=xxx ..." will override this selection.
- Native builds leave this empty.
+ Native builds leave this empty.
config SYSROOT
string "Path to sysroot"
default ""
help
- If you want to build BusyBox with a cross compiler, then you
- might also need to specify where /usr/include and /usr/lib
- will be found.
+ If you want to build BusyBox with a cross compiler, then you
+ might also need to specify where /usr/include and /usr/lib
+ will be found.
- For example, BusyBox can be built against an installed
- Android NDK, platform version 9, for ARM ABI with
+ For example, BusyBox can be built against an installed
+ Android NDK, platform version 9, for ARM ABI with
- CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
+ CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
- Native builds leave this empty.
+ Native builds leave this empty.
config EXTRA_CFLAGS
string "Additional CFLAGS"
default ""
help
- Additional CFLAGS to pass to the compiler verbatim.
+ Additional CFLAGS to pass to the compiler verbatim.
config EXTRA_LDFLAGS
string "Additional LDFLAGS"
default ""
help
- Additional LDFLAGS to pass to the linker verbatim.
+ Additional LDFLAGS to pass to the linker verbatim.
config EXTRA_LDLIBS
string "Additional LDLIBS"
default ""
help
- Additional LDLIBS to pass to the linker with -l.
+ Additional LDLIBS to pass to the linker with -l.
config USE_PORTABLE_CODE
bool "Avoid using GCC-specific code constructs"
default n
help
- Use this option if you are trying to compile busybox with
- compiler other than gcc.
- If you do use gcc, this option may needlessly increase code size.
+ Use this option if you are trying to compile busybox with
+ compiler other than gcc.
+ If you do use gcc, this option may needlessly increase code size.
comment 'Installation Options ("make install" behavior)'
@@ -525,32 +525,32 @@ choice
prompt "What kind of applet links to install"
default INSTALL_APPLET_SYMLINKS
help
- Choose what kind of links to applets are created by "make install".
+ Choose what kind of links to applets are created by "make install".
config INSTALL_APPLET_SYMLINKS
bool "as soft-links"
help
- Install applets as soft-links to the busybox binary. This needs some
- free inodes on the filesystem, but might help with filesystem
- generators that can't cope with hard-links.
+ Install applets as soft-links to the busybox binary. This needs some
+ free inodes on the filesystem, but might help with filesystem
+ generators that can't cope with hard-links.
config INSTALL_APPLET_HARDLINKS
bool "as hard-links"
help
- Install applets as hard-links to the busybox binary. This might
- count on a filesystem with few inodes.
+ Install applets as hard-links to the busybox binary. This might
+ count on a filesystem with few inodes.
config INSTALL_APPLET_SCRIPT_WRAPPERS
bool "as script wrappers"
help
- Install applets as script wrappers that call the busybox binary.
+ Install applets as script wrappers that call the busybox binary.
config INSTALL_APPLET_DONT
bool "not installed"
help
- Do not install applet links. Useful when you plan to use
- busybox --install for installing links, or plan to use
- a standalone shell and thus don't need applet links.
+ Do not install applet links. Useful when you plan to use
+ busybox --install for installing links, or plan to use
+ a standalone shell and thus don't need applet links.
endchoice
@@ -559,23 +559,23 @@ choice
default INSTALL_SH_APPLET_SYMLINK
depends on INSTALL_APPLET_SCRIPT_WRAPPERS
help
- Choose how you install /bin/sh applet link.
+ Choose how you install /bin/sh applet link.
config INSTALL_SH_APPLET_SYMLINK
bool "as soft-link"
help
- Install /bin/sh applet as soft-link to the busybox binary.
+ Install /bin/sh applet as soft-link to the busybox binary.
config INSTALL_SH_APPLET_HARDLINK
bool "as hard-link"
help
- Install /bin/sh applet as hard-link to the busybox binary.
+ Install /bin/sh applet as hard-link to the busybox binary.
config INSTALL_SH_APPLET_SCRIPT_WRAPPER
bool "as script wrapper"
help
- Install /bin/sh applet as script wrapper that calls
- the busybox binary.
+ Install /bin/sh applet as script wrapper that calls
+ the busybox binary.
endchoice
@@ -583,7 +583,7 @@ config PREFIX
string "BusyBox installation prefix"
default "./_install"
help
- Define your directory to install BusyBox files/subdirs in.
+ Define your directory to install BusyBox files/subdirs in.
comment 'Debugging Options'
@@ -591,81 +591,81 @@ config DEBUG
bool "Build BusyBox with extra Debugging symbols"
default n
help
- Say Y here if you wish to examine BusyBox internals while applets are
- running. This increases the size of the binary considerably, and
- should only be used when doing development. If you are doing
- development and want to debug BusyBox, answer Y.
+ Say Y here if you wish to examine BusyBox internals while applets are
+ running. This increases the size of the binary considerably, and
+ should only be used when doing development. If you are doing
+ development and want to debug BusyBox, answer Y.
- Most people should answer N.
+ Most people should answer N.
config DEBUG_PESSIMIZE
bool "Disable compiler optimizations"
default n
depends on DEBUG
help
- The compiler's optimization of source code can eliminate and reorder
- code, resulting in an executable that's hard to understand when
- stepping through it with a debugger. This switches it off, resulting
- in a much bigger executable that more closely matches the source
- code.
+ The compiler's optimization of source code can eliminate and reorder
+ code, resulting in an executable that's hard to understand when
+ stepping through it with a debugger. This switches it off, resulting
+ in a much bigger executable that more closely matches the source
+ code.
config DEBUG_SANITIZE
bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)"
default n
help
- Say Y here if you want to enable runtime sanitizers. These help
- catch bad memory accesses (e.g. buffer overflows), but will make
- the executable larger and slow down runtime a bit.
+ Say Y here if you want to enable runtime sanitizers. These help
+ catch bad memory accesses (e.g. buffer overflows), but will make
+ the executable larger and slow down runtime a bit.
- This adds -fsanitize=foo options to gcc command line.
+ This adds -fsanitize=foo options to gcc command line.
- If you aren't developing/testing busybox, say N here.
+ If you aren't developing/testing busybox, say N here.
config UNIT_TEST
bool "Build unit tests"
default n
help
- Say Y here if you want to build unit tests (both the framework and
- test cases) as a Busybox applet. This results in bigger code, so you
- probably don't want this option in production builds.
+ Say Y here if you want to build unit tests (both the framework and
+ test cases) as a Busybox applet. This results in bigger code, so you
+ probably don't want this option in production builds.
config WERROR
bool "Abort compilation on any warning"
default n
help
- This adds -Werror to gcc command line.
+ This adds -Werror to gcc command line.
- Most people should answer N.
+ Most people should answer N.
choice
prompt "Additional debugging library"
default NO_DEBUG_LIB
help
- Using an additional debugging library will make BusyBox become
- considerable larger and will cause it to run more slowly. You
- should always leave this option disabled for production use.
-
- dmalloc support:
- ----------------
- This enables compiling with dmalloc ( http://dmalloc.com/ )
- which is an excellent public domain mem leak and malloc problem
- detector. To enable dmalloc, before running busybox you will
- want to properly set your environment, for example:
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- The 'debug=' value is generated using the following command
- dmalloc -p log-stats -p log-non-free -p log-bad-space \
- -p log-elapsed-time -p check-fence -p check-heap \
- -p check-lists -p check-blank -p check-funcs -p realloc-copy \
- -p allow-free-null
-
- Electric-fence support:
- -----------------------
- This enables compiling with Electric-fence support. Electric
- fence is another very useful malloc debugging library which uses
- your computer's virtual memory hardware to detect illegal memory
- accesses. This support will make BusyBox be considerable larger
- and run slower, so you should leave this option disabled unless
- you are hunting a hard to find memory problem.
+ Using an additional debugging library will make BusyBox become
+ considerable larger and will cause it to run more slowly. You
+ should always leave this option disabled for production use.
+
+ dmalloc support:
+ ----------------
+ This enables compiling with dmalloc ( http://dmalloc.com/ )
+ which is an excellent public domain mem leak and malloc problem
+ detector. To enable dmalloc, before running busybox you will
+ want to properly set your environment, for example:
+ export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+ The 'debug=' value is generated using the following command
+ dmalloc -p log-stats -p log-non-free -p log-bad-space \
+ -p log-elapsed-time -p check-fence -p check-heap \
+ -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+ -p allow-free-null
+
+ Electric-fence support:
+ -----------------------
+ This enables compiling with Electric-fence support. Electric
+ fence is another very useful malloc debugging library which uses
+ your computer's virtual memory hardware to detect illegal memory
+ accesses. This support will make BusyBox be considerable larger
+ and run slower, so you should leave this option disabled unless
+ you are hunting a hard to find memory problem.
config NO_DEBUG_LIB
diff --git a/archival/Config.src b/archival/Config.src
index 4bb46f167..449914565 100644
--- a/archival/Config.src
+++ b/archival/Config.src
@@ -32,7 +32,7 @@ config FEATURE_LZMA_FAST
default n
depends on UNLZMA || LZCAT || LZMA || FEATURE_SEAMLESS_LZMA
help
- This option reduces decompression time by about 25% at the cost of
- a 1K bigger binary.
+ This option reduces decompression time by about 25% at the cost of
+ a 1K bigger binary.
endmenu
diff --git a/archival/ar.c b/archival/ar.c
index 8e4d81eeb..2886d155b 100644
--- a/archival/ar.c
+++ b/archival/ar.c
@@ -21,29 +21,29 @@
//config: bool "ar (9.5 kb)"
//config: default n # needs to be improved to be able to replace binutils ar
//config: help
-//config: ar is an archival utility program used to create, modify, and
-//config: extract contents from archives. In practice, it is used exclusively
-//config: for object module archives used by compilers.
+//config: ar is an archival utility program used to create, modify, and
+//config: extract contents from archives. In practice, it is used exclusively
+//config: for object module archives used by compilers.
//config:
-//config: Unless you have a specific application which requires ar, you should
-//config: probably say N here: most compilers come with their own ar utility.
+//config: Unless you have a specific application which requires ar, you should
+//config: probably say N here: most compilers come with their own ar utility.
//config:
//config:config FEATURE_AR_LONG_FILENAMES
//config: bool "Support long filenames (not needed for debs)"
//config: default y
//config: depends on AR
//config: help
-//config: By default the ar format can only store the first 15 characters
-//config: of the filename, this option removes that limitation.
-//config: It supports the GNU ar long filename method which moves multiple long
-//config: filenames into a the data section of a new ar entry.
+//config: By default the ar format can only store the first 15 characters
+//config: of the filename, this option removes that limitation.
+//config: It supports the GNU ar long filename method which moves multiple long
+//config: filenames into a the data section of a new ar entry.
//config:
//config:config FEATURE_AR_CREATE
//config: bool "Support archive creation"
//config: default y
//config: depends on AR
//config: help
-//config: This enables archive creation (-c and -r) with busybox ar.
+//config: This enables archive creation (-c and -r) with busybox ar.
//applet:IF_AR(APPLET(ar, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_AR) += ar.o
diff --git a/archival/bbunzip.c b/archival/bbunzip.c
index bf18a7485..d2b162d5e 100644
--- a/archival/bbunzip.c
+++ b/archival/bbunzip.c
@@ -240,8 +240,8 @@ char* FAST_FUNC make_new_name_generic(char *filename, const char *expected_ext)
//config: bool "uncompress (7.1 kb)"
//config: default n # ancient
//config: help
-//config: uncompress is used to decompress archives created by compress.
-//config: Not much used anymore, replaced by gzip/gunzip.
+//config: uncompress is used to decompress archives created by compress.
+//config: Not much used anymore, replaced by gzip/gunzip.
//applet:IF_UNCOMPRESS(APPLET(uncompress, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_UNCOMPRESS) += bbunzip.o
@@ -316,16 +316,16 @@ int uncompress_main(int argc UNUSED_PARAM, char **argv)
//config: default y
//config: select FEATURE_GZIP_DECOMPRESS
//config: help
-//config: gunzip is used to decompress archives created by gzip.
-//config: You can use the `-t' option to test the integrity of
-//config: an archive, without decompressing it.
+//config: gunzip is used to decompress archives created by gzip.
+//config: You can use the `-t' option to test the integrity of
+//config: an archive, without decompressing it.
//config:
//config:config ZCAT
//config: bool "zcat (25 kb)"
//config: default y
//config: select FEATURE_GZIP_DECOMPRESS
//config: help
-//config: Alias to "gunzip -c".
+//config: Alias to "gunzip -c".
//config:
//config:config FEATURE_GUNZIP_LONG_OPTIONS
//config: bool "Enable long options"
@@ -429,21 +429,21 @@ int gunzip_main(int argc UNUSED_PARAM, char **argv)
//config: default y
//config: select FEATURE_BZIP2_DECOMPRESS
//config: help
-//config: bunzip2 is a compression utility using the Burrows-Wheeler block
-//config: sorting text compression algorithm, and Huffman coding. Compression
-//config: is generally considerably better than that achieved by more
-//config: conventional LZ77/LZ78-based compressors, and approaches the
-//config: performance of the PPM family of statistical compressors.
+//config: bunzip2 is a compression utility using the Burrows-Wheeler block
+//config: sorting text compression algorithm, and Huffman coding. Compression
+//config: is generally considerably better than that achieved by more
+//config: conventional LZ77/LZ78-based compressors, and approaches the
+//config: performance of the PPM family of statistical compressors.
//config:
-//config: Unless you have a specific application which requires bunzip2, you
-//config: should probably say N here.
+//config: Unless you have a specific application which requires bunzip2, you
+//config: should probably say N here.
//config:
//config:config BZCAT
//config: bool "bzcat (8.8 kb)"
//config: default y
//config: select FEATURE_BZIP2_DECOMPRESS
//config: help
-//config: Alias to "bunzip2 -c".
+//config: Alias to "bunzip2 -c".
//applet:IF_BUNZIP2(APPLET(bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
@@ -496,23 +496,23 @@ int bunzip2_main(int argc UNUSED_PARAM, char **argv)
//config: bool "unlzma (8.6 kb)"
//config: default y
//config: help
-//config: unlzma is a compression utility using the Lempel-Ziv-Markov chain
-//config: compression algorithm, and range coding. Compression
-//config: is generally considerably better than that achieved by the bzip2
-//config: compressors.
+//config: unlzma is a compression utility using the Lempel-Ziv-Markov chain
+//config: compression algorithm, and range coding. Compression
+//config: is generally considerably better than that achieved by the bzip2
+//config: compressors.
//config:
//config:config LZCAT
//config: bool "lzcat (8.5 kb)"
//config: default y
//config: help
-//config: Alias to "unlzma -c".
+//config: Alias to "unlzma -c".
//config:
//config:config LZMA
//config: bool "lzma -d"
//config: default y
//config: help
-//config: Enable this option if you want commands like "lzma -d" to work.
-//config: IOW: you'll get lzma applet, but it will always require -d option.
+//config: Enable this option if you want commands like "lzma -d" to work.
+//config: IOW: you'll get lzma applet, but it will always require -d option.
//applet:IF_UNLZMA(APPLET(unlzma, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
@@ -567,20 +567,20 @@ int unlzma_main(int argc UNUSED_PARAM, char **argv)
//config: bool "unxz (13 kb)"
//config: default y
//config: help
-//config: unxz is a unlzma successor.
+//config: unxz is a unlzma successor.
//config:
//config:config XZCAT
//config: bool "xzcat (13 kb)"
//config: default y
//config: help
-//config: Alias to "unxz -c".
+//config: Alias to "unxz -c".
//config:
//config:config XZ
//config: bool "xz -d"
//config: default y
//config: help
-//config: Enable this option if you want commands like "xz -d" to work.
-//config: IOW: you'll get xz applet, but it will always require -d option.
+//config: Enable this option if you want commands like "xz -d" to work.
+//config: IOW: you'll get xz applet, but it will always require -d option.
//applet:IF_UNXZ(APPLET(unxz, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/archival/bzip2.c b/archival/bzip2.c
index a115cb6ea..0b9c508df 100644
--- a/archival/bzip2.c
+++ b/archival/bzip2.c
@@ -11,23 +11,23 @@
//config: bool "bzip2 (18 kb)"
//config: default y
//config: help
-//config: bzip2 is a compression utility using the Burrows-Wheeler block
-//config: sorting text compression algorithm, and Huffman coding. Compression
-//config: is generally considerably better than that achieved by more
-//config: conventional LZ77/LZ78-based compressors, and approaches the
-//config: performance of the PPM family of statistical compressors.
+//config: bzip2 is a compression utility using the Burrows-Wheeler block
+//config: sorting text compression algorithm, and Huffman coding. Compression
+//config: is generally considerably better than that achieved by more
+//config: conventional LZ77/LZ78-based compressors, and approaches the
+//config: performance of the PPM family of statistical compressors.
//config:
-//config: Unless you have a specific application which requires bzip2, you
-//config: should probably say N here.
+//config: Unless you have a specific application which requires bzip2, you
+//config: should probably say N here.
//config:
//config:config FEATURE_BZIP2_DECOMPRESS
//config: bool "Enable decompression"
//config: default y
//config: depends on BZIP2 || BUNZIP2 || BZCAT
//config: help
-//config: Enable -d (--decompress) and -t (--test) options for bzip2.
-//config: This will be automatically selected if bunzip2 or bzcat is
-//config: enabled.
+//config: Enable -d (--decompress) and -t (--test) options for bzip2.
+//config: This will be automatically selected if bunzip2 or bzcat is
+//config: enabled.
//applet:IF_BZIP2(APPLET(bzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_BZIP2) += bzip2.o
diff --git a/archival/cpio.c b/archival/cpio.c
index 4416348b6..38bab8257 100644
--- a/archival/cpio.c
+++ b/archival/cpio.c
@@ -18,30 +18,30 @@
//config: bool "cpio (14 kb)"
//config: default y
//config: help
-//config: cpio is an archival utility program used to create, modify, and
-//config: extract contents from archives.
-//config: cpio has 110 bytes of overheads for every stored file.
+//config: cpio is an archival utility program used to create, modify, and
+//config: extract contents from archives.
+//config: cpio has 110 bytes of overheads for every stored file.
//config:
-//config: This implementation of cpio can extract cpio archives created in the
-//config: "newc" or "crc" format.
+//config: This implementation of cpio can extract cpio archives created in the
+//config: "newc" or "crc" format.
//config:
-//config: Unless you have a specific application which requires cpio, you
-//config: should probably say N here.
+//config: Unless you have a specific application which requires cpio, you
+//config: should probably say N here.
//config:
//config:config FEATURE_CPIO_O
//config: bool "Support archive creation"
//config: default y
//config: depends on CPIO
//config: help
-//config: This implementation of cpio can create cpio archives in the "newc"
-//config: format only.
+//config: This implementation of cpio can create cpio archives in the "newc"
+//config: format only.
//config:
//config:config FEATURE_CPIO_P
//config: bool "Support passthrough mode"
//config: default y
//config: depends on FEATURE_CPIO_O
//config: help
-//config: Passthrough mode. Rarely used.
+//config: Passthrough mode. Rarely used.
//applet:IF_CPIO(APPLET(cpio, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_CPIO) += cpio.o
diff --git a/archival/dpkg.c b/archival/dpkg.c
index 41c8fc5d1..90ad8766c 100644
--- a/archival/dpkg.c
+++ b/archival/dpkg.c
@@ -31,11 +31,11 @@
//config: default y
//config: select FEATURE_SEAMLESS_GZ
//config: help
-//config: dpkg is a medium-level tool to install, build, remove and manage
-//config: Debian packages.
+//config: dpkg is a medium-level tool to install, build, remove and manage
+//config: Debian packages.
//config:
-//config: This implementation of dpkg has a number of limitations,
-//config: you should use the official dpkg if possible.
+//config: This implementation of dpkg has a number of limitations,
+//config: you should use the official dpkg if possible.
//applet:IF_DPKG(APPLET(dpkg, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_DPKG) += dpkg.o
diff --git a/archival/dpkg_deb.c b/archival/dpkg_deb.c
index ebbc7f035..029bc4af1 100644
--- a/archival/dpkg_deb.c
+++ b/archival/dpkg_deb.c
@@ -10,12 +10,12 @@
//config: default y
//config: select FEATURE_SEAMLESS_GZ
//config: help
-//config: dpkg-deb unpacks and provides information about Debian archives.
+//config: dpkg-deb unpacks and provides information about Debian archives.
//config:
-//config: This implementation of dpkg-deb cannot pack archives.
+//config: This implementation of dpkg-deb cannot pack archives.
//config:
-//config: Unless you have a specific application which requires dpkg-deb,
-//config: say N here.
+//config: Unless you have a specific application which requires dpkg-deb,
+//config: say N here.
//applet:IF_DPKG_DEB(APPLET_ODDNAME(dpkg-deb, dpkg_deb, BB_DIR_USR_BIN, BB_SUID_DROP, dpkg_deb))
diff --git a/archival/gzip.c b/archival/gzip.c
index a883a1fff..4cf34ac28 100644
--- a/archival/gzip.c
+++ b/archival/gzip.c
@@ -41,8 +41,8 @@ aa: 85.1% -- replaced with aa.gz
//config: bool "gzip (19 kb)"
//config: default y
//config: help
-//config: gzip is used to compress files.
-//config: It's probably the most widely used UNIX compression program.
+//config: gzip is used to compress files.
+//config: It's probably the most widely used UNIX compression program.
//config:
//config:config FEATURE_GZIP_LONG_OPTIONS
//config: bool "Enable long options"
@@ -55,30 +55,30 @@ aa: 85.1% -- replaced with aa.gz
//config: range 0 2
//config: depends on GZIP
//config: help
-//config: Enable big memory options for gzip.
-//config: 0: small buffers, small hash-tables
-//config: 1: larger buffers, larger hash-tables
-//config: 2: larger buffers, largest hash-tables
-//config: Larger models may give slightly better compression
+//config: Enable big memory options for gzip.
+//config: 0: small buffers, small hash-tables
+//config: 1: larger buffers, larger hash-tables
+//config: 2: larger buffers, largest hash-tables
+//config: Larger models may give slightly better compression
//config:
//config:config FEATURE_GZIP_LEVELS
//config: bool "Enable compression levels"
//config: default n
//config: depends on GZIP
//config: help
-//config: Enable support for compression levels 4-9. The default level
-//config: is 6. If levels 1-3 are specified, 4 is used.
-//config: If this option is not selected, -N options are ignored and -9
-//config: is used.
+//config: Enable support for compression levels 4-9. The default level
+//config: is 6. If levels 1-3 are specified, 4 is used.
+//config: If this option is not selected, -N options are ignored and -9
+//config: is used.
//config:
//config:config FEATURE_GZIP_DECOMPRESS
//config: bool "Enable decompression"
//config: default y
//config: depends on GZIP || GUNZIP || ZCAT
//config: help
-//config: Enable -d (--decompress) and -t (--test) options for gzip.
-//config: This will be automatically selected if gunzip or zcat is
-//config: enabled.
+//config: Enable -d (--decompress) and -t (--test) options for gzip.
+//config: This will be automatically selected if gunzip or zcat is
+//config: enabled.
//applet:IF_GZIP(APPLET(gzip, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_GZIP) += gzip.o
diff --git a/archival/lzop.c b/archival/lzop.c
index 967d4b74d..df18ff170 100644
--- a/archival/lzop.c
+++ b/archival/lzop.c
@@ -29,28 +29,28 @@
//config: bool "lzop (13 kb)"
//config: default y
//config: help
-//config: Lzop compression/decompresion.
+//config: Lzop compression/decompresion.
//config:
//config:config UNLZOP
//config: bool "unlzop (13 kb)"
//config: default n # INCOMPAT: upstream lzop does not provide such tool
//config: help
-//config: Lzop decompresion.
+//config: Lzop decompresion.
//config:
//config:config LZOPCAT
//config: bool "lzopcat (13 kb)"
//config: default n # INCOMPAT: upstream lzop does not provide such tool
//config: help
-//config: Alias to "lzop -dc".
+//config: Alias to "lzop -dc".
//config:
//config:config LZOP_COMPR_HIGH
//config: bool "lzop compression levels 7,8,9 (not very useful)"
//config: default n
//config: depends on LZOP || UNLZOP || LZOPCAT
//config: help
-//config: High levels (7,8,9) of lzop compression. These levels
-//config: are actually slower than gzip at equivalent compression ratios
-//config: and take up 3.2K of code.
+//config: High levels (7,8,9) of lzop compression. These levels
+//config: are actually slower than gzip at equivalent compression ratios
+//config: and take up 3.2K of code.
//applet:IF_LZOP(APPLET(lzop, BB_DIR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/archival/rpm.c b/archival/rpm.c
index 2974dfc61..98039d499 100644
--- a/archival/rpm.c
+++ b/archival/rpm.c
@@ -11,7 +11,7 @@
//config: bool "rpm (33 kb)"
//config: default y
//config: help
-//config: Mini RPM applet - queries and extracts RPM packages.
+//config: Mini RPM applet - queries and extracts RPM packages.
//applet:IF_RPM(APPLET(rpm, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_RPM) += rpm.o
diff --git a/archival/rpm2cpio.c b/archival/rpm2cpio.c
index 9d503be52..3e4a6a249 100644
--- a/archival/rpm2cpio.c
+++ b/archival/rpm2cpio.c
@@ -11,7 +11,7 @@
//config: bool "rpm2cpio (20 kb)"
//config: default y
//config: help
-//config: Converts a RPM file into a CPIO archive.
+//config: Converts a RPM file into a CPIO archive.
//applet:IF_RPM2CPIO(APPLET(rpm2cpio, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_RPM2CPIO) += rpm2cpio.o
diff --git a/archival/tar.c b/archival/tar.c
index fcabb0126..0fc574dfd 100644
--- a/archival/tar.c
+++ b/archival/tar.c
@@ -45,9 +45,9 @@
//config: bool "tar (40 kb)"
//config: default y
//config: help
-//config: tar is an archiving program. It's commonly used with gzip to
-//config: create compressed archives. It's probably the most widely used
-//config: UNIX archive program.
+//config: tar is an archiving program. It's commonly used with gzip to
+//config: create compressed archives. It's probably the most widely used
+//config: UNIX archive program.
//config:
//config:config FEATURE_TAR_LONG_OPTIONS
//config: bool "Enable long options"
@@ -64,35 +64,35 @@
//config: default y
//config: depends on TAR && (FEATURE_SEAMLESS_Z || FEATURE_SEAMLESS_GZ || FEATURE_SEAMLESS_BZ2 || FEATURE_SEAMLESS_LZMA || FEATURE_SEAMLESS_XZ)
//config: help
-//config: With this option tar can automatically detect compressed
-//config: tarballs. Currently it works only on files (not pipes etc).
+//config: With this option tar can automatically detect compressed
+//config: tarballs. Currently it works only on files (not pipes etc).
//config:
//config:config FEATURE_TAR_FROM
//config: bool "Enable -X (exclude from) and -T (include from) options)"
//config: default y
//config: depends on TAR
//config: help
-//config: If you enable this option you'll be able to specify
-//config: a list of files to include or exclude from an archive.
+//config: If you enable this option you'll be able to specify
+//config: a list of files to include or exclude from an archive.
//config:
//config:config FEATURE_TAR_OLDGNU_COMPATIBILITY
//config: bool "Support old tar header format"
//config: default y
//config: depends on TAR || DPKG
//config: help
-//config: This option is required to unpack archives created in
-//config: the old GNU format; help to kill this old format by
-//config: repacking your ancient archives with the new format.
+//config: This option is required to unpack archives created in
+//config: the old GNU format; help to kill this old format by
+//config: repacking your ancient archives with the new format.
//config:
//config:config FEATURE_TAR_OLDSUN_COMPATIBILITY
//config: bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
//config: default y
//config: depends on TAR || DPKG
//config: help
-//config: This option is required to unpack archives created by some old
-//config: version of Sun's tar (it was calculating checksum using signed
-//config: arithmetic). It is said to be fixed in newer Sun tar, but "old"
-//config: tarballs still exist.
+//config: This option is required to unpack archives created by some old
+//config: version of Sun's tar (it was calculating checksum using signed
+//config: arithmetic). It is said to be fixed in newer Sun tar, but "old"
+//config: tarballs still exist.
//config:
//config:config FEATURE_TAR_GNU_EXTENSIONS
//config: bool "Support GNU tar extensions (long filenames)"
@@ -104,18 +104,18 @@
//config: default y
//config: depends on TAR && FEATURE_TAR_LONG_OPTIONS
//config: help
-//config: If you enable this option you'll be able to instruct tar to send
-//config: the contents of each extracted file to the standard input of an
-//config: external program.
+//config: If you enable this option you'll be able to instruct tar to send
+//config: the contents of each extracted file to the standard input of an
+//config: external program.
//config:
//config:config FEATURE_TAR_UNAME_GNAME
//config: bool "Enable use of user and group names"
//config: default y
//config: depends on TAR
//config: help
-//config: Enable use of user and group names in tar. This affects contents
-//config: listings (-t) and preserving permissions when unpacking (-p).
-//config: +200 bytes.
+//config: Enable use of user and group names in tar. This affects contents
+//config: listings (-t) and preserving permissions when unpacking (-p).
+//config: +200 bytes.
//config:
//config:config FEATURE_TAR_NOPRESERVE_TIME
//config: bool "Enable -m (do not preserve time) GNU option"
@@ -127,8 +127,8 @@
//config: default n
//config: depends on TAR && SELINUX
//config: help
-//config: With this option busybox supports restoring SELinux labels
-//config: when extracting files from tar archives.
+//config: With this option busybox supports restoring SELinux labels
+//config: when extracting files from tar archives.
//applet:IF_TAR(APPLET(tar, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_TAR) += tar.o
diff --git a/archival/unzip.c b/archival/unzip.c
index b618c3617..bb39d954e 100644
--- a/archival/unzip.c
+++ b/archival/unzip.c
@@ -20,20 +20,20 @@
//config: bool "unzip (24 kb)"
//config: default y
//config: help
-//config: unzip will list or extract files from a ZIP archive,
-//config: commonly found on DOS/WIN systems. The default behavior
-//config: (with no options) is to extract the archive into the
-//config: current directory.
+//config: unzip will list or extract files from a ZIP archive,
+//config: commonly found on DOS/WIN systems. The default behavior
+//config: (with no options) is to extract the archive into the
+//config: current directory.
//config:
//config:config FEATURE_UNZIP_CDF
//config: bool "Read and use Central Directory data"
//config: default y
//config: depends on UNZIP
//config: help
-//config: If you know that you only need to deal with simple
-//config: ZIP files without deleted/updated files, SFX archives etc,
-//config: you can reduce code size by unselecting this option.
-//config: To support less trivial ZIPs, say Y.
+//config: If you know that you only need to deal with simple
+//config: ZIP files without deleted/updated files, SFX archives etc,
+//config: you can reduce code size by unselecting this option.
+//config: To support less trivial ZIPs, say Y.
//config:
//config:config FEATURE_UNZIP_BZIP2
//config: bool "Support compression method 12 (bzip2)"
diff --git a/console-tools/chvt.c b/console-tools/chvt.c
index 729f13ba2..d8152de6b 100644
--- a/console-tools/chvt.c
+++ b/console-tools/chvt.c
@@ -11,8 +11,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program is used to change to another terminal.
-//config: Example: chvt 4 (change to terminal /dev/tty4)
+//config: This program is used to change to another terminal.
+//config: Example: chvt 4 (change to terminal /dev/tty4)
//applet:IF_CHVT(APPLET(chvt, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/clear.c b/console-tools/clear.c
index 0c11ec817..13eec498b 100644
--- a/console-tools/clear.c
+++ b/console-tools/clear.c
@@ -10,7 +10,7 @@
//config: bool "clear (tiny)"
//config: default y
//config: help
-//config: This program clears the terminal screen.
+//config: This program clears the terminal screen.
//applet:IF_CLEAR(APPLET(clear, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/deallocvt.c b/console-tools/deallocvt.c
index cf74a03ed..6ffb1471e 100644
--- a/console-tools/deallocvt.c
+++ b/console-tools/deallocvt.c
@@ -12,7 +12,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program deallocates unused virtual consoles.
+//config: This program deallocates unused virtual consoles.
//applet:IF_DEALLOCVT(APPLET(deallocvt, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/dumpkmap.c b/console-tools/dumpkmap.c
index a8d8e3572..d4e2cf281 100644
--- a/console-tools/dumpkmap.c
+++ b/console-tools/dumpkmap.c
@@ -12,8 +12,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program dumps the kernel's keyboard translation table to
-//config: stdout, in binary format. You can then use loadkmap to load it.
+//config: This program dumps the kernel's keyboard translation table to
+//config: stdout, in binary format. You can then use loadkmap to load it.
//applet:IF_DUMPKMAP(APPLET(dumpkmap, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/console-tools/fgconsole.c b/console-tools/fgconsole.c
index 2582162a5..64311f6ea 100644
--- a/console-tools/fgconsole.c
+++ b/console-tools/fgconsole.c
@@ -11,7 +11,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program prints active (foreground) console number.
+//config: This program prints active (foreground) console number.
//applet:IF_FGCONSOLE(APPLET(fgconsole, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/kbd_mode.c b/console-tools/kbd_mode.c
index 815a65ad9..d81c56e92 100644
--- a/console-tools/kbd_mode.c
+++ b/console-tools/kbd_mode.c
@@ -13,7 +13,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program reports and sets keyboard mode.
+//config: This program reports and sets keyboard mode.
//applet:IF_KBD_MODE(APPLET(kbd_mode, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/console-tools/loadfont.c b/console-tools/loadfont.c
index b7d291723..6dc8fa831 100644
--- a/console-tools/loadfont.c
+++ b/console-tools/loadfont.c
@@ -14,29 +14,29 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program loads a console font from standard input.
+//config: This program loads a console font from standard input.
//config:
//config:config SETFONT
//config: bool "setfont (26 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Allows to load console screen map. Useful for i18n.
+//config: Allows to load console screen map. Useful for i18n.
//config:
//config:config FEATURE_SETFONT_TEXTUAL_MAP
//config: bool "Support reading textual screen maps"
//config: default y
//config: depends on SETFONT
//config: help
-//config: Support reading textual screen maps.
+//config: Support reading textual screen maps.
//config:
//config:config DEFAULT_SETFONT_DIR
//config: string "Default directory for console-tools files"
//config: default ""
//config: depends on SETFONT
//config: help
-//config: Directory to use if setfont's params are simple filenames
-//config: (not /path/to/file or ./file). Default is "" (no default directory).
+//config: Directory to use if setfont's params are simple filenames
+//config: (not /path/to/file or ./file). Default is "" (no default directory).
//config:
//config:comment "Common options for loadfont and setfont"
//config: depends on LOADFONT || SETFONT
diff --git a/console-tools/loadkmap.c b/console-tools/loadkmap.c
index 7e8f82497..839dc2083 100644
--- a/console-tools/loadkmap.c
+++ b/console-tools/loadkmap.c
@@ -11,8 +11,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program loads a keyboard translation table from
-//config: standard input.
+//config: This program loads a keyboard translation table from
+//config: standard input.
//applet:IF_LOADKMAP(APPLET(loadkmap, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/console-tools/openvt.c b/console-tools/openvt.c
index 7ed3a28d5..f3db28367 100644
--- a/console-tools/openvt.c
+++ b/console-tools/openvt.c
@@ -12,8 +12,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program is used to start a command on an unused
-//config: virtual terminal.
+//config: This program is used to start a command on an unused
+//config: virtual terminal.
//applet:IF_OPENVT(APPLET(openvt, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/reset.c b/console-tools/reset.c
index a0ce5c73d..04e5b0ca1 100644
--- a/console-tools/reset.c
+++ b/console-tools/reset.c
@@ -13,8 +13,8 @@
//config: bool "reset (275 bytes)"
//config: default y
//config: help
-//config: This program is used to reset the terminal screen, if it
-//config: gets messed up.
+//config: This program is used to reset the terminal screen, if it
+//config: gets messed up.
//applet:IF_RESET(APPLET(reset, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/resize.c b/console-tools/resize.c
index 4ac5ee1aa..62928a01e 100644
--- a/console-tools/resize.c
+++ b/console-tools/resize.c
@@ -10,18 +10,18 @@
//config: bool "resize (756 bytes)"
//config: default y
//config: help
-//config: This program is used to (re)set the width and height of your current
-//config: terminal.
+//config: This program is used to (re)set the width and height of your current
+//config: terminal.
//config:
//config:config FEATURE_RESIZE_PRINT
//config: bool "Print environment variables"
//config: default y
//config: depends on RESIZE
//config: help
-//config: Prints the newly set size (number of columns and rows) of
-//config: the terminal.
-//config: E.g.:
-//config: COLUMNS=80;LINES=44;export COLUMNS LINES;
+//config: Prints the newly set size (number of columns and rows) of
+//config: the terminal.
+//config: E.g.:
+//config: COLUMNS=80;LINES=44;export COLUMNS LINES;
//applet:IF_RESIZE(APPLET(resize, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/setconsole.c b/console-tools/setconsole.c
index 7ba5a0eed..ad0f756ca 100644
--- a/console-tools/setconsole.c
+++ b/console-tools/setconsole.c
@@ -12,8 +12,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program redirects the system console to another device,
-//config: like the current tty while logged in via telnet.
+//config: This program redirects the system console to another device,
+//config: like the current tty while logged in via telnet.
//config:
//config:config FEATURE_SETCONSOLE_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/console-tools/setkeycodes.c b/console-tools/setkeycodes.c
index cc668ec8a..543fbe3e0 100644
--- a/console-tools/setkeycodes.c
+++ b/console-tools/setkeycodes.c
@@ -13,8 +13,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program loads entries into the kernel's scancode-to-keycode
-//config: map, allowing unusual keyboards to generate usable keycodes.
+//config: This program loads entries into the kernel's scancode-to-keycode
+//config: map, allowing unusual keyboards to generate usable keycodes.
//applet:IF_SETKEYCODES(APPLET(setkeycodes, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/console-tools/setlogcons.c b/console-tools/setlogcons.c
index 350a71d43..1b5814eee 100644
--- a/console-tools/setlogcons.c
+++ b/console-tools/setlogcons.c
@@ -13,7 +13,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: This program redirects the output console of kernel messages.
+//config: This program redirects the output console of kernel messages.
//applet:IF_SETLOGCONS(APPLET(setlogcons, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/console-tools/showkey.c b/console-tools/showkey.c
index 8a485245d..c322ce99d 100644
--- a/console-tools/showkey.c
+++ b/console-tools/showkey.c
@@ -11,7 +11,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Shows keys pressed.
+//config: Shows keys pressed.
//applet:IF_SHOWKEY(APPLET(showkey, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/Config.src b/coreutils/Config.src
index 1d2fea1fb..7a8a3a634 100644
--- a/coreutils/Config.src
+++ b/coreutils/Config.src
@@ -13,9 +13,9 @@ config FEATURE_VERBOSE
bool "Support verbose options (usually -v) for various applets"
default y
help
- Enable cp -v, rm -v and similar messages.
- Also enables long option (--verbose) if it exists.
- Without this option, -v is accepted but ignored.
+ Enable cp -v, rm -v and similar messages.
+ Also enables long option (--verbose) if it exists.
+ Without this option, -v is accepted but ignored.
comment "Common options for cp and mv"
depends on CP || MV
@@ -25,7 +25,7 @@ config FEATURE_PRESERVE_HARDLINKS
default y
depends on CP || MV
help
- Allow cp and mv to preserve hard links.
+ Allow cp and mv to preserve hard links.
comment "Common options for df, du, ls"
depends on DF || DU || LS
@@ -35,6 +35,6 @@ config FEATURE_HUMAN_READABLE
default y
depends on DF || DU || LS
help
- Allow df, du, and ls to have human readable output.
+ Allow df, du, and ls to have human readable output.
endmenu
diff --git a/coreutils/basename.c b/coreutils/basename.c
index 6d8215895..481cdcee9 100644
--- a/coreutils/basename.c
+++ b/coreutils/basename.c
@@ -18,9 +18,9 @@
//config: bool "basename (371 bytes)"
//config: default y
//config: help
-//config: basename is used to strip the directory and suffix from filenames,
-//config: leaving just the filename itself. Enable this option if you wish
-//config: to enable the 'basename' utility.
+//config: basename is used to strip the directory and suffix from filenames,
+//config: leaving just the filename itself. Enable this option if you wish
+//config: to enable the 'basename' utility.
//applet:IF_BASENAME(APPLET_NOFORK(basename, basename, BB_DIR_USR_BIN, BB_SUID_DROP, basename))
diff --git a/coreutils/cat.c b/coreutils/cat.c
index 41bef8f1d..390254512 100644
--- a/coreutils/cat.c
+++ b/coreutils/cat.c
@@ -10,22 +10,22 @@
//config: bool "cat (5.6 kb)"
//config: default y
//config: help
-//config: cat is used to concatenate files and print them to the standard
-//config: output. Enable this option if you wish to enable the 'cat' utility.
+//config: cat is used to concatenate files and print them to the standard
+//config: output. Enable this option if you wish to enable the 'cat' utility.
//config:
//config:config FEATURE_CATN
//config: bool "Enable -n and -b options"
//config: default y
//config: depends on CAT
//config: help
-//config: -n numbers all output lines while -b numbers nonempty output lines.
+//config: -n numbers all output lines while -b numbers nonempty output lines.
//config:
//config:config FEATURE_CATV
//config: bool "cat -v[etA]"
//config: default y
//config: depends on CAT
//config: help
-//config: Display nonprinting characters as escape sequences
+//config: Display nonprinting characters as escape sequences
//applet:IF_CAT(APPLET(cat, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/chgrp.c b/coreutils/chgrp.c
index 834346b4d..27a0edf0d 100644
--- a/coreutils/chgrp.c
+++ b/coreutils/chgrp.c
@@ -10,7 +10,7 @@
//config: bool "chgrp (7.2 kb)"
//config: default y
//config: help
-//config: chgrp is used to change the group ownership of files.
+//config: chgrp is used to change the group ownership of files.
//applet:IF_CHGRP(APPLET_NOEXEC(chgrp, chgrp, BB_DIR_BIN, BB_SUID_DROP, chgrp))
diff --git a/coreutils/chmod.c b/coreutils/chmod.c
index ec075f7c9..2174334d1 100644
--- a/coreutils/chmod.c
+++ b/coreutils/chmod.c
@@ -13,7 +13,7 @@
//config: bool "chmod (5.1 kb)"
//config: default y
//config: help
-//config: chmod is used to change the access permission of files.
+//config: chmod is used to change the access permission of files.
//applet:IF_CHMOD(APPLET_NOEXEC(chmod, chmod, BB_DIR_BIN, BB_SUID_DROP, chmod))
diff --git a/coreutils/chown.c b/coreutils/chown.c
index 5c04bc39a..1bfc725cc 100644
--- a/coreutils/chown.c
+++ b/coreutils/chown.c
@@ -10,8 +10,8 @@
//config: bool "chown (7.2 kb)"
//config: default y
//config: help
-//config: chown is used to change the user and/or group ownership
-//config: of files.
+//config: chown is used to change the user and/or group ownership
+//config: of files.
//config:
//config:config FEATURE_CHOWN_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/chroot.c b/coreutils/chroot.c
index 6fa3a3f27..44a587fe0 100644
--- a/coreutils/chroot.c
+++ b/coreutils/chroot.c
@@ -10,8 +10,8 @@
//config: bool "chroot (3.7 kb)"
//config: default y
//config: help
-//config: chroot is used to change the root directory and run a command.
-//config: The default command is `/bin/sh'.
+//config: chroot is used to change the root directory and run a command.
+//config: The default command is `/bin/sh'.
//applet:IF_CHROOT(APPLET(chroot, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/coreutils/cksum.c b/coreutils/cksum.c
index dce17d94b..c0cf65d2a 100644
--- a/coreutils/cksum.c
+++ b/coreutils/cksum.c
@@ -10,7 +10,7 @@
//config: bool "cksum (4.2 kb)"
//config: default y
//config: help
-//config: cksum is used to calculate the CRC32 checksum of a file.
+//config: cksum is used to calculate the CRC32 checksum of a file.
//applet:IF_CKSUM(APPLET_NOEXEC(cksum, cksum, BB_DIR_USR_BIN, BB_SUID_DROP, cksum))
diff --git a/coreutils/comm.c b/coreutils/comm.c
index 8f9dcde29..5be11468c 100644
--- a/coreutils/comm.c
+++ b/coreutils/comm.c
@@ -10,8 +10,8 @@
//config: bool "comm (3.9 kb)"
//config: default y
//config: help
-//config: comm is used to compare two files line by line and return
-//config: a three-column output.
+//config: comm is used to compare two files line by line and return
+//config: a three-column output.
//applet:IF_COMM(APPLET(comm, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/cp.c b/coreutils/cp.c
index 726859c5f..092e39583 100644
--- a/coreutils/cp.c
+++ b/coreutils/cp.c
@@ -15,15 +15,15 @@
//config: bool "cp (9.7 kb)"
//config: default y
//config: help
-//config: cp is used to copy files and directories.
+//config: cp is used to copy files and directories.
//config:
//config:config FEATURE_CP_LONG_OPTIONS
//config: bool "Enable long options"
//config: default y
//config: depends on CP && LONG_OPTS
//config: help
-//config: Enable long options.
-//config: Also add support for --parents option.
+//config: Enable long options.
+//config: Also add support for --parents option.
//applet:IF_CP(APPLET_NOEXEC(cp, cp, BB_DIR_BIN, BB_SUID_DROP, cp))
diff --git a/coreutils/cut.c b/coreutils/cut.c
index 2338702f3..6578ce8ce 100644
--- a/coreutils/cut.c
+++ b/coreutils/cut.c
@@ -12,8 +12,8 @@
//config: bool "cut (5.3 kb)"
//config: default y
//config: help
-//config: cut is used to print selected parts of lines from
-//config: each file to stdout.
+//config: cut is used to print selected parts of lines from
+//config: each file to stdout.
//applet:IF_CUT(APPLET_NOEXEC(cut, cut, BB_DIR_USR_BIN, BB_SUID_DROP, cut))
diff --git a/coreutils/date.c b/coreutils/date.c
index c658d000b..0fb9f1f00 100644
--- a/coreutils/date.c
+++ b/coreutils/date.c
@@ -22,16 +22,16 @@
//config: bool "date (7.1 kb)"
//config: default y
//config: help
-//config: date is used to set the system date or display the
-//config: current time in the given format.
+//config: date is used to set the system date or display the
+//config: current time in the given format.
//config:
//config:config FEATURE_DATE_ISOFMT
//config: bool "Enable ISO date format output (-I)"
//config: default y
//config: depends on DATE
//config: help
-//config: Enable option (-I) to output an ISO-8601 compliant
-//config: date/time string.
+//config: Enable option (-I) to output an ISO-8601 compliant
+//config: date/time string.
//config:
//config:# defaults to "no": stat's nanosecond field is a bit non-portable
//config:config FEATURE_DATE_NANO
@@ -40,23 +40,23 @@
//config: depends on DATE # syscall(__NR_clock_gettime)
//config: select PLATFORM_LINUX
//config: help
-//config: Support %[num]N format specifier. Adds ~250 bytes of code.
+//config: Support %[num]N format specifier. Adds ~250 bytes of code.
//config:
//config:config FEATURE_DATE_COMPAT
//config: bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format"
//config: default y
//config: depends on DATE
//config: help
-//config: System time can be set by 'date -s DATE' and simply 'date DATE',
-//config: but formats of DATE string are different. 'date DATE' accepts
-//config: a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
-//config: unnatural placement of year between minutes and seconds.
-//config: date -s (and other commands like touch -d) use more sensible
-//config: formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
+//config: System time can be set by 'date -s DATE' and simply 'date DATE',
+//config: but formats of DATE string are different. 'date DATE' accepts
+//config: a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
+//config: unnatural placement of year between minutes and seconds.
+//config: date -s (and other commands like touch -d) use more sensible
+//config: formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
//config:
-//config: With this option off, 'date DATE' is 'date -s DATE' support
-//config: the same format. With it on, 'date DATE' additionally supports
-//config: MMDDhhmm[[YY]YY][.ss] format.
+//config: With this option off, 'date DATE' is 'date -s DATE' support
+//config: the same format. With it on, 'date DATE' additionally supports
+//config: MMDDhhmm[[YY]YY][.ss] format.
//applet:IF_DATE(APPLET(date, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/dd.c b/coreutils/dd.c
index 0150aff96..43545c010 100644
--- a/coreutils/dd.c
+++ b/coreutils/dd.c
@@ -10,46 +10,46 @@
//config: bool "dd (7.1 kb)"
//config: default y
//config: help
-//config: dd copies a file (from standard input to standard output,
-//config: by default) using specific input and output blocksizes,
-//config: while optionally performing conversions on it.
+//config: dd copies a file (from standard input to standard output,
+//config: by default) using specific input and output blocksizes,
+//config: while optionally performing conversions on it.
//config:
//config:config FEATURE_DD_SIGNAL_HANDLING
//config: bool "Enable signal handling for status reporting"
//config: default y
//config: depends on DD
//config: help
-//config: Sending a SIGUSR1 signal to a running `dd' process makes it
-//config: print to standard error the number of records read and written
-//config: so far, then to resume copying.
+//config: Sending a SIGUSR1 signal to a running `dd' process makes it
+//config: print to standard error the number of records read and written
+//config: so far, then to resume copying.
//config:
-//config: $ dd if=/dev/zero of=/dev/null &
-//config: $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
-//config: 10899206+0 records in
-//config: 10899206+0 records out
+//config: $ dd if=/dev/zero of=/dev/null &
+//config: $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
+//config: 10899206+0 records in
+//config: 10899206+0 records out
//config:
//config:config FEATURE_DD_THIRD_STATUS_LINE
//config: bool "Enable the third status line upon signal"
//config: default y
//config: depends on DD && FEATURE_DD_SIGNAL_HANDLING
//config: help
-//config: Displays a coreutils-like third status line with transferred bytes,
-//config: elapsed time and speed.
+//config: Displays a coreutils-like third status line with transferred bytes,
+//config: elapsed time and speed.
//config:
//config:config FEATURE_DD_IBS_OBS
//config: bool "Enable ibs, obs and conv options"
//config: default y
//config: depends on DD
//config: help
-//config: Enable support for writing a certain number of bytes in and out,
-//config: at a time, and performing conversions on the data stream.
+//config: Enable support for writing a certain number of bytes in and out,
+//config: at a time, and performing conversions on the data stream.
//config:
//config:config FEATURE_DD_STATUS
//config: bool "Enable status display options"
//config: default y
//config: depends on DD
//config: help
-//config: Enable support for status=noxfer/none option.
+//config: Enable support for status=noxfer/none option.
//applet:IF_DD(APPLET_NOEXEC(dd, dd, BB_DIR_BIN, BB_SUID_DROP, dd))
diff --git a/coreutils/df.c b/coreutils/df.c
index 900c57ea2..27dd2b5a8 100644
--- a/coreutils/df.c
+++ b/coreutils/df.c
@@ -21,17 +21,17 @@
//config: bool "df (7.5 kb)"
//config: default y
//config: help
-//config: df reports the amount of disk space used and available
-//config: on filesystems.
+//config: df reports the amount of disk space used and available
+//config: on filesystems.
//config:
//config:config FEATURE_DF_FANCY
//config: bool "Enable -a, -i, -B"
//config: default y
//config: depends on DF
//config: help
-//config: -a Show all filesystems
-//config: -i Inodes
-//config: -B <SIZE> Blocksize
+//config: -a Show all filesystems
+//config: -i Inodes
+//config: -B <SIZE> Blocksize
//applet:IF_DF(APPLET(df, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/dirname.c b/coreutils/dirname.c
index 7fa31365f..511267b78 100644
--- a/coreutils/dirname.c
+++ b/coreutils/dirname.c
@@ -10,8 +10,8 @@
//config: bool "dirname (289 bytes)"
//config: default y
//config: help
-//config: dirname is used to strip a non-directory suffix from
-//config: a file name.
+//config: dirname is used to strip a non-directory suffix from
+//config: a file name.
//applet:IF_DIRNAME(APPLET_NOFORK(dirname, dirname, BB_DIR_USR_BIN, BB_SUID_DROP, dirname))
diff --git a/coreutils/dos2unix.c b/coreutils/dos2unix.c
index e595bf558..a3d008051 100644
--- a/coreutils/dos2unix.c
+++ b/coreutils/dos2unix.c
@@ -15,15 +15,15 @@
//config: bool "dos2unix (5.1 kb)"
//config: default y
//config: help
-//config: dos2unix is used to convert a text file from DOS format to
-//config: UNIX format, and vice versa.
+//config: dos2unix is used to convert a text file from DOS format to
+//config: UNIX format, and vice versa.
//config:
//config:config UNIX2DOS
//config: bool "unix2dos (5.1 kb)"
//config: default y
//config: help
-//config: unix2dos is used to convert a text file from UNIX format to
-//config: DOS format, and vice versa.
+//config: unix2dos is used to convert a text file from UNIX format to
+//config: DOS format, and vice versa.
//applet:IF_DOS2UNIX(APPLET_NOEXEC(dos2unix, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, dos2unix))
//applet:IF_UNIX2DOS(APPLET_NOEXEC(unix2dos, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, unix2dos))
diff --git a/coreutils/du.c b/coreutils/du.c
index 03e31a0e4..947c46e74 100644
--- a/coreutils/du.c
+++ b/coreutils/du.c
@@ -22,15 +22,15 @@
//config: bool "du (default blocksize of 512 bytes)"
//config: default y
//config: help
-//config: du is used to report the amount of disk space used
-//config: for specified files.
+//config: du is used to report the amount of disk space used
+//config: for specified files.
//config:
//config:config FEATURE_DU_DEFAULT_BLOCKSIZE_1K
//config: bool "Use a default blocksize of 1024 bytes (1K)"
//config: default y
//config: depends on DU
//config: help
-//config: Use a blocksize of (1K) instead of the default 512b.
+//config: Use a blocksize of (1K) instead of the default 512b.
//applet:IF_DU(APPLET(du, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/echo.c b/coreutils/echo.c
index a7e4ca9ac..af33319a1 100644
--- a/coreutils/echo.c
+++ b/coreutils/echo.c
@@ -22,7 +22,7 @@
//config: bool "echo (basic SuSv3 version taking no options)"
//config: default y
//config: help
-//config: echo is used to print a specified string to stdout.
+//config: echo is used to print a specified string to stdout.
//config:
//config:# this entry also appears in shell/Config.in, next to the echo builtin
//config:config FEATURE_FANCY_ECHO
diff --git a/coreutils/env.c b/coreutils/env.c
index 7037a44c2..8def9c2da 100644
--- a/coreutils/env.c
+++ b/coreutils/env.c
@@ -27,9 +27,9 @@
//config: bool "env (3.8 kb)"
//config: default y
//config: help
-//config: env is used to set an environment variable and run
-//config: a command; without options it displays the current
-//config: environment.
+//config: env is used to set an environment variable and run
+//config: a command; without options it displays the current
+//config: environment.
//config:
//config:config FEATURE_ENV_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/expand.c b/coreutils/expand.c
index dff0ce558..64f2a539d 100644
--- a/coreutils/expand.c
+++ b/coreutils/expand.c
@@ -24,7 +24,7 @@
//config: bool "expand (5.8 kb)"
//config: default y
//config: help
-//config: By default, convert all tabs to spaces.
+//config: By default, convert all tabs to spaces.
//config:
//config:config FEATURE_EXPAND_LONG_OPTIONS
//config: bool "Enable long options"
@@ -35,7 +35,7 @@
//config: bool "unexpand (6 kb)"
//config: default y
//config: help
-//config: By default, convert only leading sequences of blanks to tabs.
+//config: By default, convert only leading sequences of blanks to tabs.
//config:
//config:config FEATURE_UNEXPAND_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/expr.c b/coreutils/expr.c
index ecb7534b2..a2bbfdd69 100644
--- a/coreutils/expr.c
+++ b/coreutils/expr.c
@@ -26,17 +26,17 @@
//config: bool "expr (6.1 kb)"
//config: default y
//config: help
-//config: expr is used to calculate numbers and print the result
-//config: to standard output.
+//config: expr is used to calculate numbers and print the result
+//config: to standard output.
//config:
//config:config EXPR_MATH_SUPPORT_64
//config: bool "Extend Posix numbers support to 64 bit"
//config: default y
//config: depends on EXPR
//config: help
-//config: Enable 64-bit math support in the expr applet. This will make
-//config: the applet slightly larger, but will allow computation with very
-//config: large numbers.
+//config: Enable 64-bit math support in the expr applet. This will make
+//config: the applet slightly larger, but will allow computation with very
+//config: large numbers.
//applet:IF_EXPR(APPLET(expr, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/factor.c b/coreutils/factor.c
index 4ccc3fee4..467e23a4d 100644
--- a/coreutils/factor.c
+++ b/coreutils/factor.c
@@ -7,7 +7,7 @@
//config: bool "factor (2.6 kb)"
//config: default y
//config: help
-//config: factor factorizes integers
+//config: factor factorizes integers
//applet:IF_FACTOR(APPLET(factor, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/false.c b/coreutils/false.c
index 171ad813b..e3903efd0 100644
--- a/coreutils/false.c
+++ b/coreutils/false.c
@@ -10,7 +10,7 @@
//config: bool "false (tiny)"
//config: default y
//config: help
-//config: false returns an exit code of FALSE (1).
+//config: false returns an exit code of FALSE (1).
//applet:IF_FALSE(APPLET_NOFORK(false, false, BB_DIR_BIN, BB_SUID_DROP, false))
diff --git a/coreutils/fold.c b/coreutils/fold.c
index 35905f3df..286db228d 100644
--- a/coreutils/fold.c
+++ b/coreutils/fold.c
@@ -13,7 +13,7 @@
//config: bool "fold (4.6 kb)"
//config: default y
//config: help
-//config: Wrap text to fit a specific width.
+//config: Wrap text to fit a specific width.
//applet:IF_FOLD(APPLET_NOEXEC(fold, fold, BB_DIR_USR_BIN, BB_SUID_DROP, fold))
diff --git a/coreutils/fsync.c b/coreutils/fsync.c
index 8524047a5..5e77e2c16 100644
--- a/coreutils/fsync.c
+++ b/coreutils/fsync.c
@@ -10,7 +10,7 @@
//config: bool "fsync (3.7 kb)"
//config: default y
//config: help
-//config: fsync is used to flush file-related cached blocks to disk.
+//config: fsync is used to flush file-related cached blocks to disk.
//applet:IF_FSYNC(APPLET_NOFORK(fsync, fsync, BB_DIR_BIN, BB_SUID_DROP, fsync))
diff --git a/coreutils/head.c b/coreutils/head.c
index b4b16abea..fc3a48d5b 100644
--- a/coreutils/head.c
+++ b/coreutils/head.c
@@ -10,8 +10,8 @@
//config: bool "head (3.7 kb)"
//config: default y
//config: help
-//config: head is used to print the first specified number of lines
-//config: from files.
+//config: head is used to print the first specified number of lines
+//config: from files.
//config:
//config:config FEATURE_FANCY_HEAD
//config: bool "Enable -c, -q, and -v"
diff --git a/coreutils/hostid.c b/coreutils/hostid.c
index 790384c95..d21e6d6ac 100644
--- a/coreutils/hostid.c
+++ b/coreutils/hostid.c
@@ -10,8 +10,8 @@
//config: bool "hostid (247 bytes)"
//config: default y
//config: help
-//config: hostid prints the numeric identifier (in hexadecimal) for
-//config: the current host.
+//config: hostid prints the numeric identifier (in hexadecimal) for
+//config: the current host.
//applet:IF_HOSTID(APPLET_NOFORK(hostid, hostid, BB_DIR_USR_BIN, BB_SUID_DROP, hostid))
diff --git a/coreutils/id.c b/coreutils/id.c
index 93ca0acf6..6043bca61 100644
--- a/coreutils/id.c
+++ b/coreutils/id.c
@@ -16,13 +16,13 @@
//config: bool "id (6.7 kb)"
//config: default y
//config: help
-//config: id displays the current user and group ID names.
+//config: id displays the current user and group ID names.
//config:
//config:config GROUPS
//config: bool "groups (6.5 kb)"
//config: default y
//config: help
-//config: Print the group names associated with current user id.
+//config: Print the group names associated with current user id.
//applet:IF_GROUPS(APPLET_NOEXEC(groups, id, BB_DIR_USR_BIN, BB_SUID_DROP, groups))
//applet:IF_ID( APPLET_NOEXEC(id, id, BB_DIR_USR_BIN, BB_SUID_DROP, id ))
diff --git a/coreutils/install.c b/coreutils/install.c
index 4c44f0d4d..a1342bb13 100644
--- a/coreutils/install.c
+++ b/coreutils/install.c
@@ -9,7 +9,7 @@
//config: bool "install (12 kb)"
//config: default y
//config: help
-//config: Copy files and set attributes.
+//config: Copy files and set attributes.
//config:
//config:config FEATURE_INSTALL_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/link.c b/coreutils/link.c
index c6417fef8..56832fdf6 100644
--- a/coreutils/link.c
+++ b/coreutils/link.c
@@ -9,7 +9,7 @@
//config: bool "link (3.1 kb)"
//config: default y
//config: help
-//config: link creates hard links between files.
+//config: link creates hard links between files.
//applet:IF_LINK(APPLET_NOFORK(link, link, BB_DIR_BIN, BB_SUID_DROP, link))
diff --git a/coreutils/ln.c b/coreutils/ln.c
index 0bd323b2a..fed96af42 100644
--- a/coreutils/ln.c
+++ b/coreutils/ln.c
@@ -10,7 +10,7 @@
//config: bool "ln (4.5 kb)"
//config: default y
//config: help
-//config: ln is used to create hard or soft links between files.
+//config: ln is used to create hard or soft links between files.
//applet:IF_LN(APPLET_NOEXEC(ln, ln, BB_DIR_BIN, BB_SUID_DROP, ln))
diff --git a/coreutils/logname.c b/coreutils/logname.c
index bf3748338..e614ca7cf 100644
--- a/coreutils/logname.c
+++ b/coreutils/logname.c
@@ -19,7 +19,7 @@
//config: bool "logname (894 bytes)"
//config: default y
//config: help
-//config: logname is used to print the current user's login name.
+//config: logname is used to print the current user's login name.
//applet:IF_LOGNAME(APPLET_NOFORK(logname, logname, BB_DIR_USR_BIN, BB_SUID_DROP, logname))
diff --git a/coreutils/ls.c b/coreutils/ls.c
index cf5228745..0fe0345b3 100644
--- a/coreutils/ls.c
+++ b/coreutils/ls.c
@@ -31,7 +31,7 @@
//config: bool "ls (14 kb)"
//config: default y
//config: help
-//config: ls is used to list the contents of directories.
+//config: ls is used to list the contents of directories.
//config:
//config:config FEATURE_LS_FILETYPES
//config: bool "Enable filetyping options (-p and -F)"
@@ -58,39 +58,39 @@
//config: default y
//config: depends on LS
//config: help
-//config: Allow ls to sort file names alphabetically.
+//config: Allow ls to sort file names alphabetically.
//config:
//config:config FEATURE_LS_TIMESTAMPS
//config: bool "Show file timestamps"
//config: default y
//config: depends on LS
//config: help
-//config: Allow ls to display timestamps for files.
+//config: Allow ls to display timestamps for files.
//config:
//config:config FEATURE_LS_USERNAME
//config: bool "Show username/groupnames"
//config: default y
//config: depends on LS
//config: help
-//config: Allow ls to display username/groupname for files.
+//config: Allow ls to display username/groupname for files.
//config:
//config:config FEATURE_LS_COLOR
//config: bool "Allow use of color to identify file types"
//config: default y
//config: depends on LS && LONG_OPTS
//config: help
-//config: This enables the --color option to ls.
+//config: This enables the --color option to ls.
//config:
//config:config FEATURE_LS_COLOR_IS_DEFAULT
//config: bool "Produce colored ls output by default"
//config: default y
//config: depends on FEATURE_LS_COLOR
//config: help
-//config: Saying yes here will turn coloring on by default,
-//config: even if no "--color" option is given to the ls command.
-//config: This is not recommended, since the colors are not
-//config: configurable, and the output may not be legible on
-//config: many output screens.
+//config: Saying yes here will turn coloring on by default,
+//config: even if no "--color" option is given to the ls command.
+//config: This is not recommended, since the colors are not
+//config: configurable, and the output may not be legible on
+//config: many output screens.
//applet:IF_LS(APPLET_NOEXEC(ls, ls, BB_DIR_BIN, BB_SUID_DROP, ls))
diff --git a/coreutils/md5_sha1_sum.c b/coreutils/md5_sha1_sum.c
index 6d08d2e40..bcccdd64f 100644
--- a/coreutils/md5_sha1_sum.c
+++ b/coreutils/md5_sha1_sum.c
@@ -9,31 +9,31 @@
//config: bool "md5sum (6.8 kb)"
//config: default y
//config: help
-//config: md5sum is used to print or check MD5 checksums.
+//config: md5sum is used to print or check MD5 checksums.
//config:
//config:config SHA1SUM
//config: bool "sha1sum (6 kb)"
//config: default y
//config: help
-//config: Compute and check SHA1 message digest
+//config: Compute and check SHA1 message digest
//config:
//config:config SHA256SUM
//config: bool "sha256sum (7.1 kb)"
//config: default y
//config: help
-//config: Compute and check SHA256 message digest
+//config: Compute and check SHA256 message digest
//config:
//config:config SHA512SUM
//config: bool "sha512sum (7.6 kb)"
//config: default y
//config: help
-//config: Compute and check SHA512 message digest
+//config: Compute and check SHA512 message digest
//config:
//config:config SHA3SUM
//config: bool "sha3sum (6.3 kb)"
//config: default y
//config: help
-//config: Compute and check SHA3 message digest
+//config: Compute and check SHA3 message digest
//config:
//config:comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
//config: depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
@@ -43,9 +43,9 @@
//config: default y
//config: depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
//config: help
-//config: Enabling the -c options allows files to be checked
-//config: against pre-calculated hash values.
-//config: -s and -w are useful options when verifying checksums.
+//config: Enabling the -c options allows files to be checked
+//config: against pre-calculated hash values.
+//config: -s and -w are useful options when verifying checksums.
//applet:IF_MD5SUM(APPLET_NOEXEC(md5sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, md5sum))
//applet:IF_SHA1SUM(APPLET_NOEXEC(sha1sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, sha1sum))
diff --git a/coreutils/mkdir.c b/coreutils/mkdir.c
index d0b74bfde..22851187c 100644
--- a/coreutils/mkdir.c
+++ b/coreutils/mkdir.c
@@ -17,7 +17,7 @@
//config: bool "mkdir (4.4 kb)"
//config: default y
//config: help
-//config: mkdir is used to create directories with the specified names.
+//config: mkdir is used to create directories with the specified names.
//config:
//config:config FEATURE_MKDIR_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/mkfifo.c b/coreutils/mkfifo.c
index 8a2f20553..0f614017e 100644
--- a/coreutils/mkfifo.c
+++ b/coreutils/mkfifo.c
@@ -10,8 +10,8 @@
//config: bool "mkfifo (3.7 kb)"
//config: default y
//config: help
-//config: mkfifo is used to create FIFOs (named pipes).
-//config: The 'mknod' program can also create FIFOs.
+//config: mkfifo is used to create FIFOs (named pipes).
+//config: The 'mknod' program can also create FIFOs.
//applet:IF_MKFIFO(APPLET_NOEXEC(mkfifo, mkfifo, BB_DIR_USR_BIN, BB_SUID_DROP, mkfifo))
diff --git a/coreutils/mknod.c b/coreutils/mknod.c
index 321415e17..565b33d20 100644
--- a/coreutils/mknod.c
+++ b/coreutils/mknod.c
@@ -10,8 +10,8 @@
//config: bool "mknod (4 kb)"
//config: default y
//config: help
-//config: mknod is used to create FIFOs or block/character special
-//config: files with the specified names.
+//config: mknod is used to create FIFOs or block/character special
+//config: files with the specified names.
//applet:IF_MKNOD(APPLET_NOEXEC(mknod, mknod, BB_DIR_BIN, BB_SUID_DROP, mknod))
diff --git a/coreutils/mktemp.c b/coreutils/mktemp.c
index 3e35befeb..bfef0b4a6 100644
--- a/coreutils/mktemp.c
+++ b/coreutils/mktemp.c
@@ -34,7 +34,7 @@
//config: bool "mktemp (4 kb)"
//config: default y
//config: help
-//config: mktemp is used to create unique temporary files
+//config: mktemp is used to create unique temporary files
//applet:IF_MKTEMP(APPLET(mktemp, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/mv.c b/coreutils/mv.c
index d620c43ab..147dd3bb2 100644
--- a/coreutils/mv.c
+++ b/coreutils/mv.c
@@ -15,7 +15,7 @@
//config: bool "mv (9.8 kb)"
//config: default y
//config: help
-//config: mv is used to move or rename files or directories.
+//config: mv is used to move or rename files or directories.
//config:
//config:config FEATURE_MV_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/coreutils/nice.c b/coreutils/nice.c
index e30242ffa..0bf055299 100644
--- a/coreutils/nice.c
+++ b/coreutils/nice.c
@@ -10,7 +10,7 @@
//config: bool "nice (1.8 kb)"
//config: default y
//config: help
-//config: nice runs a program with modified scheduling priority.
+//config: nice runs a program with modified scheduling priority.
//applet:IF_NICE(APPLET(nice, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/nl.c b/coreutils/nl.c
index 9f303fe6c..93e78c490 100644
--- a/coreutils/nl.c
+++ b/coreutils/nl.c
@@ -8,7 +8,7 @@
//config: bool "nl (4.3 kb)"
//config: default y
//config: help
-//config: nl is used to number lines of files.
+//config: nl is used to number lines of files.
//applet:IF_NL(APPLET(nl, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/nohup.c b/coreutils/nohup.c
index 4366cdc8d..8e28f9029 100644
--- a/coreutils/nohup.c
+++ b/coreutils/nohup.c
@@ -13,7 +13,7 @@
//config: bool "nohup (2 kb)"
//config: default y
//config: help
-//config: run a command immune to hangups, with output to a non-tty.
+//config: run a command immune to hangups, with output to a non-tty.
//applet:IF_NOHUP(APPLET(nohup, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/nproc.c b/coreutils/nproc.c
index 7144f73e8..68a831865 100644
--- a/coreutils/nproc.c
+++ b/coreutils/nproc.c
@@ -7,7 +7,7 @@
//config: bool "nproc (248 bytes)"
//config: default y
//config: help
-//config: Print number of CPUs
+//config: Print number of CPUs
//applet:IF_NPROC(APPLET(nproc, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/od.c b/coreutils/od.c
index edcd12a54..e3a68435b 100644
--- a/coreutils/od.c
+++ b/coreutils/od.c
@@ -14,7 +14,7 @@
//config: bool "od (11 kb)"
//config: default y
//config: help
-//config: od is used to dump binary files in octal and other formats.
+//config: od is used to dump binary files in octal and other formats.
//applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/paste.c b/coreutils/paste.c
index e4e9c7565..52f67f951 100644
--- a/coreutils/paste.c
+++ b/coreutils/paste.c
@@ -10,8 +10,8 @@
//config: bool "paste (4.5 kb)"
//config: default y
//config: help
-//config: paste is used to paste lines of different files together
-//config: and write the result to stdout
+//config: paste is used to paste lines of different files together
+//config: and write the result to stdout
//applet:IF_PASTE(APPLET_NOEXEC(paste, paste, BB_DIR_USR_BIN, BB_SUID_DROP, paste))
diff --git a/coreutils/printenv.c b/coreutils/printenv.c
index 767a27525..b0468b3f7 100644
--- a/coreutils/printenv.c
+++ b/coreutils/printenv.c
@@ -11,7 +11,7 @@
//config: bool "printenv (1 kb)"
//config: default y
//config: help
-//config: printenv is used to print all or part of environment.
+//config: printenv is used to print all or part of environment.
//applet:IF_PRINTENV(APPLET_NOFORK(printenv, printenv, BB_DIR_BIN, BB_SUID_DROP, printenv))
diff --git a/coreutils/printf.c b/coreutils/printf.c
index acaf076ff..d3fc72adb 100644
--- a/coreutils/printf.c
+++ b/coreutils/printf.c
@@ -42,8 +42,8 @@
//config: bool "printf (3.3 kb)"
//config: default y
//config: help
-//config: printf is used to format and print specified strings.
-//config: It's similar to `echo' except it has more options.
+//config: printf is used to format and print specified strings.
+//config: It's similar to `echo' except it has more options.
//applet:IF_PRINTF(APPLET_NOFORK(printf, printf, BB_DIR_USR_BIN, BB_SUID_DROP, printf))
diff --git a/coreutils/pwd.c b/coreutils/pwd.c
index e0a195d37..345d85100 100644
--- a/coreutils/pwd.c
+++ b/coreutils/pwd.c
@@ -10,7 +10,7 @@
//config: bool "pwd (3.4 kb)"
//config: default y
//config: help
-//config: pwd is used to print the current directory.
+//config: pwd is used to print the current directory.
//applet:IF_PWD(APPLET_NOFORK(pwd, pwd, BB_DIR_BIN, BB_SUID_DROP, pwd))
diff --git a/coreutils/readlink.c b/coreutils/readlink.c
index e593bb9a4..9690290e3 100644
--- a/coreutils/readlink.c
+++ b/coreutils/readlink.c
@@ -10,15 +10,15 @@
//config: bool "readlink (3.6 kb)"
//config: default y
//config: help
-//config: This program reads a symbolic link and returns the name
-//config: of the file it points to
+//config: This program reads a symbolic link and returns the name
+//config: of the file it points to
//config:
//config:config FEATURE_READLINK_FOLLOW
//config: bool "Enable canonicalization by following all symlinks (-f)"
//config: default y
//config: depends on READLINK
//config: help
-//config: Enable the readlink option (-f).
+//config: Enable the readlink option (-f).
//applet:IF_READLINK(APPLET(readlink, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/realpath.c b/coreutils/realpath.c
index a2661c461..6a61c3dc8 100644
--- a/coreutils/realpath.c
+++ b/coreutils/realpath.c
@@ -10,8 +10,8 @@
//config: bool "realpath (1.1 kb)"
//config: default y
//config: help
-//config: Return the canonicalized absolute pathname.
-//config: This isn't provided by GNU shellutils, but where else does it belong.
+//config: Return the canonicalized absolute pathname.
+//config: This isn't provided by GNU shellutils, but where else does it belong.
//applet:IF_REALPATH(APPLET(realpath, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/rm.c b/coreutils/rm.c
index 70530a458..f91c94570 100644
--- a/coreutils/rm.c
+++ b/coreutils/rm.c
@@ -14,7 +14,7 @@
//config: bool "rm (4.9 kb)"
//config: default y
//config: help
-//config: rm is used to remove files or directories.
+//config: rm is used to remove files or directories.
//applet:IF_RM(APPLET_NOFORK(rm, rm, BB_DIR_BIN, BB_SUID_DROP, rm))
diff --git a/coreutils/rmdir.c b/coreutils/rmdir.c
index 2486ea67e..c04ce78f8 100644
--- a/coreutils/rmdir.c
+++ b/coreutils/rmdir.c
@@ -10,15 +10,15 @@
//config: bool "rmdir (3.4 kb)"
//config: default y
//config: help
-//config: rmdir is used to remove empty directories.
+//config: rmdir is used to remove empty directories.
//config:
//config:config FEATURE_RMDIR_LONG_OPTIONS
//config: bool "Enable long options"
//config: default y
//config: depends on RMDIR && LONG_OPTS
//config: help
-//config: Support long options for the rmdir applet, including
-//config: --ignore-fail-on-non-empty for compatibility with GNU rmdir.
+//config: Support long options for the rmdir applet, including
+//config: --ignore-fail-on-non-empty for compatibility with GNU rmdir.
//applet:IF_RMDIR(APPLET_NOFORK(rmdir, rmdir, BB_DIR_BIN, BB_SUID_DROP, rmdir))
diff --git a/coreutils/seq.c b/coreutils/seq.c
index c66bed94a..f36dbb4ec 100644
--- a/coreutils/seq.c
+++ b/coreutils/seq.c
@@ -10,7 +10,7 @@
//config: bool "seq (3.6 kb)"
//config: default y
//config: help
-//config: print a sequence of numbers
+//config: print a sequence of numbers
//applet:IF_SEQ(APPLET_NOFORK(seq, seq, BB_DIR_USR_BIN, BB_SUID_DROP, seq))
diff --git a/coreutils/shred.c b/coreutils/shred.c
index 93319e24d..3ceb58d19 100644
--- a/coreutils/shred.c
+++ b/coreutils/shred.c
@@ -8,7 +8,7 @@
//config: bool "shred (5 kb)"
//config: default y
//config: help
-//config: Overwrite a file to hide its contents, and optionally delete it
+//config: Overwrite a file to hide its contents, and optionally delete it
//applet:IF_SHRED(APPLET(shred, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/shuf.c b/coreutils/shuf.c
index b1a9d1254..403041534 100644
--- a/coreutils/shuf.c
+++ b/coreutils/shuf.c
@@ -11,7 +11,7 @@
//config: bool "shuf (5.4 kb)"
//config: default y
//config: help
-//config: Generate random permutations
+//config: Generate random permutations
//kbuild:lib-$(CONFIG_SHUF) += shuf.o
//applet:IF_SHUF(APPLET_NOEXEC(shuf, shuf, BB_DIR_USR_BIN, BB_SUID_DROP, shuf))
diff --git a/coreutils/sleep.c b/coreutils/sleep.c
index 6b3aa1ffa..9b9581ca9 100644
--- a/coreutils/sleep.c
+++ b/coreutils/sleep.c
@@ -16,29 +16,29 @@
//config: bool "sleep (1.7 kb)"
//config: default y
//config: help
-//config: sleep is used to pause for a specified number of seconds.
-//config: It comes in 3 versions:
-//config: - small: takes one integer parameter
-//config: - fancy: takes multiple integer arguments with suffixes:
-//config: sleep 1d 2h 3m 15s
-//config: - fancy with fractional numbers:
-//config: sleep 2.3s 4.5h sleeps for 16202.3 seconds
-//config: Last one is "the most compatible" with coreutils sleep,
-//config: but it adds around 1k of code.
+//config: sleep is used to pause for a specified number of seconds.
+//config: It comes in 3 versions:
+//config: - small: takes one integer parameter
+//config: - fancy: takes multiple integer arguments with suffixes:
+//config: sleep 1d 2h 3m 15s
+//config: - fancy with fractional numbers:
+//config: sleep 2.3s 4.5h sleeps for 16202.3 seconds
+//config: Last one is "the most compatible" with coreutils sleep,
+//config: but it adds around 1k of code.
//config:
//config:config FEATURE_FANCY_SLEEP
//config: bool "Enable multiple arguments and s/m/h/d suffixes"
//config: default y
//config: depends on SLEEP
//config: help
-//config: Allow sleep to pause for specified minutes, hours, and days.
+//config: Allow sleep to pause for specified minutes, hours, and days.
//config:
//config:config FEATURE_FLOAT_SLEEP
//config: bool "Enable fractional arguments"
//config: default y
//config: depends on FEATURE_FANCY_SLEEP
//config: help
-//config: Allow for fractional numeric parameters.
+//config: Allow for fractional numeric parameters.
/* Do not make this applet NOFORK. It breaks ^C-ing of pauses in shells */
//applet:IF_SLEEP(APPLET(sleep, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/sort.c b/coreutils/sort.c
index a8803819d..9860dca64 100644
--- a/coreutils/sort.c
+++ b/coreutils/sort.c
@@ -15,19 +15,19 @@
//config: bool "sort (7.4 kb)"
//config: default y
//config: help
-//config: sort is used to sort lines of text in specified files.
+//config: sort is used to sort lines of text in specified files.
//config:
//config:config FEATURE_SORT_BIG
//config: bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
//config: default y
//config: depends on SORT
//config: help
-//config: Without this, sort only supports -r, -u, and an integer version
-//config: of -n. Selecting this adds sort keys, floating point support, and
-//config: more. This adds a little over 3k to a nonstatic build on x86.
+//config: Without this, sort only supports -r, -u, and an integer version
+//config: of -n. Selecting this adds sort keys, floating point support, and
+//config: more. This adds a little over 3k to a nonstatic build on x86.
//config:
-//config: The SuSv3 sort standard is available at:
-//config: http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+//config: The SuSv3 sort standard is available at:
+//config: http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
//applet:IF_SORT(APPLET_NOEXEC(sort, sort, BB_DIR_USR_BIN, BB_SUID_DROP, sort))
diff --git a/coreutils/split.c b/coreutils/split.c
index dc6f62109..d0c63573a 100644
--- a/coreutils/split.c
+++ b/coreutils/split.c
@@ -9,16 +9,16 @@
//config: bool "split (5.4 kb)"
//config: default y
//config: help
-//config: Split a file into pieces.
+//config: Split a file into pieces.
//config:
//config:config FEATURE_SPLIT_FANCY
//config: bool "Fancy extensions"
//config: default y
//config: depends on SPLIT
//config: help
-//config: Add support for features not required by SUSv3.
-//config: Supports additional suffixes 'b' for 512 bytes,
-//config: 'g' for 1GiB for the -b option.
+//config: Add support for features not required by SUSv3.
+//config: Supports additional suffixes 'b' for 512 bytes,
+//config: 'g' for 1GiB for the -b option.
//applet:IF_SPLIT(APPLET(split, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/stat.c b/coreutils/stat.c
index e2f9a223d..3b85808b5 100644
--- a/coreutils/stat.c
+++ b/coreutils/stat.c
@@ -16,16 +16,16 @@
//config: bool "stat (10 kb)"
//config: default y
//config: help
-//config: display file or filesystem status.
+//config: display file or filesystem status.
//config:
//config:config FEATURE_STAT_FORMAT
//config: bool "Enable custom formats (-c)"
//config: default y
//config: depends on STAT
//config: help
-//config: Without this, stat will not support the '-c format' option where
-//config: users can pass a custom format string for output. This adds about
-//config: 7k to a nonstatic build on amd64.
+//config: Without this, stat will not support the '-c format' option where
+//config: users can pass a custom format string for output. This adds about
+//config: 7k to a nonstatic build on amd64.
//config:
//config:config FEATURE_STAT_FILESYSTEM
//config: bool "Enable display of filesystem status (-f)"
@@ -33,8 +33,8 @@
//config: depends on STAT
//config: select PLATFORM_LINUX # statfs()
//config: help
-//config: Without this, stat will not support the '-f' option to display
-//config: information about filesystem status.
+//config: Without this, stat will not support the '-f' option to display
+//config: information about filesystem status.
//applet:IF_STAT(APPLET(stat, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/stty.c b/coreutils/stty.c
index 3a4b32ce0..f987fbbcf 100644
--- a/coreutils/stty.c
+++ b/coreutils/stty.c
@@ -23,7 +23,7 @@
//config: bool "stty (8.6 kb)"
//config: default y
//config: help
-//config: stty is used to change and print terminal line settings.
+//config: stty is used to change and print terminal line settings.
//applet:IF_STTY(APPLET(stty, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/sum.c b/coreutils/sum.c
index ef2f94e45..487e93f4a 100644
--- a/coreutils/sum.c
+++ b/coreutils/sum.c
@@ -16,7 +16,7 @@
//config: bool "sum (4.3 kb)"
//config: default y
//config: help
-//config: checksum and count the blocks in a file
+//config: checksum and count the blocks in a file
//applet:IF_SUM(APPLET(sum, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/sync.c b/coreutils/sync.c
index 5557103b3..66445281a 100644
--- a/coreutils/sync.c
+++ b/coreutils/sync.c
@@ -11,14 +11,14 @@
//config: bool "sync (769 bytes)"
//config: default y
//config: help
-//config: sync is used to flush filesystem buffers.
+//config: sync is used to flush filesystem buffers.
//config:config FEATURE_SYNC_FANCY
//config: bool "Enable -d and -f flags (requires syncfs(2) in libc)"
//config: default y
//config: depends on SYNC
//config: help
-//config: sync -d FILE... executes fdatasync() on each FILE.
-//config: sync -f FILE... executes syncfs() on each FILE.
+//config: sync -d FILE... executes fdatasync() on each FILE.
+//config: sync -f FILE... executes syncfs() on each FILE.
//applet:IF_SYNC(APPLET_NOFORK(sync, sync, BB_DIR_BIN, BB_SUID_DROP, sync))
diff --git a/coreutils/tac.c b/coreutils/tac.c
index 1f5b34a84..6d3ea9c19 100644
--- a/coreutils/tac.c
+++ b/coreutils/tac.c
@@ -16,7 +16,7 @@
//config: bool "tac (4.1 kb)"
//config: default y
//config: help
-//config: tac is used to concatenate and print files in reverse.
+//config: tac is used to concatenate and print files in reverse.
//applet:IF_TAC(APPLET_NOEXEC(tac, tac, BB_DIR_USR_BIN, BB_SUID_DROP, tac))
diff --git a/coreutils/tail.c b/coreutils/tail.c
index a834e241e..fd310f422 100644
--- a/coreutils/tail.c
+++ b/coreutils/tail.c
@@ -22,20 +22,20 @@
//config: bool "tail (7.1 kb)"
//config: default y
//config: help
-//config: tail is used to print the last specified number of lines
-//config: from files.
+//config: tail is used to print the last specified number of lines
+//config: from files.
//config:
//config:config FEATURE_FANCY_TAIL
//config: bool "Enable -q, -s, -v, and -F options"
//config: default y
//config: depends on TAIL
//config: help
-//config: These options are provided by GNU tail, but
-//config: are not specific in the SUSv3 standard:
-//config: -q Never output headers giving file names
-//config: -s SEC Wait SEC seconds between reads with -f
-//config: -v Always output headers giving file names
-//config: -F Same as -f, but keep retrying
+//config: These options are provided by GNU tail, but
+//config: are not specified in the SUSv3 standard:
+//config: -q Never output headers giving file names
+//config: -s SEC Wait SEC seconds between reads with -f
+//config: -v Always output headers giving file names
+//config: -F Same as -f, but keep retrying
//applet:IF_TAIL(APPLET(tail, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/tee.c b/coreutils/tee.c
index f7676ce9e..f0ec791bb 100644
--- a/coreutils/tee.c
+++ b/coreutils/tee.c
@@ -10,15 +10,15 @@
//config: bool "tee (4.3 kb)"
//config: default y
//config: help
-//config: tee is used to read from standard input and write
-//config: to standard output and files.
+//config: tee is used to read from standard input and write
+//config: to standard output and files.
//config:
//config:config FEATURE_TEE_USE_BLOCK_IO
//config: bool "Enable block I/O (larger/faster) instead of byte I/O"
//config: default y
//config: depends on TEE
//config: help
-//config: Enable this option for a faster tee, at expense of size.
+//config: Enable this option for a faster tee, at expense of size.
//applet:IF_TEE(APPLET(tee, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/test.c b/coreutils/test.c
index 5cca5d1f2..d8ac42e22 100644
--- a/coreutils/test.c
+++ b/coreutils/test.c
@@ -23,28 +23,28 @@
//config: bool "test (3.6 kb)"
//config: default y
//config: help
-//config: test is used to check file types and compare values,
-//config: returning an appropriate exit code. The bash shell
-//config: has test built in, ash can build it in optionally.
+//config: test is used to check file types and compare values,
+//config: returning an appropriate exit code. The bash shell
+//config: has test built in, ash can build it in optionally.
//config:
//config:config TEST1
//config: bool "test as ["
//config: default y
//config: help
-//config: Provide test command in the "[ EXPR ]" form
+//config: Provide test command in the "[ EXPR ]" form
//config:
//config:config TEST2
//config: bool "test as [["
//config: default y
//config: help
-//config: Provide test command in the "[[ EXPR ]]" form
+//config: Provide test command in the "[[ EXPR ]]" form
//config:
//config:config FEATURE_TEST_64
//config: bool "Extend test to 64 bit"
//config: default y
//config: depends on TEST || TEST1 || TEST2 || ASH_TEST || HUSH_TEST
//config: help
-//config: Enable 64-bit support in test.
+//config: Enable 64-bit support in test.
//applet:IF_TEST(APPLET_NOFORK(test, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
//applet:IF_TEST1(APPLET_NOFORK([, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
diff --git a/coreutils/timeout.c b/coreutils/timeout.c
index 5981c7bcb..4a6117f59 100644
--- a/coreutils/timeout.c
+++ b/coreutils/timeout.c
@@ -31,8 +31,8 @@
//config: bool "timeout (5.5 kb)"
//config: default y
//config: help
-//config: Runs a program and watches it. If it does not terminate in
-//config: specified number of seconds, it is sent a signal.
+//config: Runs a program and watches it. If it does not terminate in
+//config: specified number of seconds, it is sent a signal.
//applet:IF_TIMEOUT(APPLET(timeout, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/touch.c b/coreutils/touch.c
index 7b7b9f8a1..11b40d427 100644
--- a/coreutils/touch.c
+++ b/coreutils/touch.c
@@ -16,23 +16,23 @@
//config: bool "touch (5.8 kb)"
//config: default y
//config: help
-//config: touch is used to create or change the access and/or
-//config: modification timestamp of specified files.
+//config: touch is used to create or change the access and/or
+//config: modification timestamp of specified files.
//config:
//config:config FEATURE_TOUCH_NODEREF
//config: bool "Add support for -h"
//config: default y
//config: depends on TOUCH
//config: help
-//config: Enable touch to have the -h option.
-//config: This requires libc support for lutimes() function.
+//config: Enable touch to have the -h option.
+//config: This requires libc support for lutimes() function.
//config:
//config:config FEATURE_TOUCH_SUSV3
//config: bool "Add support for SUSV3 features (-d -t -r)"
//config: default y
//config: depends on TOUCH
//config: help
-//config: Enable touch to use a reference file or a given date/time argument.
+//config: Enable touch to use a reference file or a given date/time argument.
//applet:IF_TOUCH(APPLET_NOFORK(touch, touch, BB_DIR_BIN, BB_SUID_DROP, touch))
diff --git a/coreutils/tr.c b/coreutils/tr.c
index 4281a2c69..64e4efc91 100644
--- a/coreutils/tr.c
+++ b/coreutils/tr.c
@@ -22,27 +22,27 @@
//config: bool "tr (5.5 kb)"
//config: default y
//config: help
-//config: tr is used to squeeze, and/or delete characters from standard
-//config: input, writing to standard output.
+//config: tr is used to squeeze, and/or delete characters from standard
+//config: input, writing to standard output.
//config:
//config:config FEATURE_TR_CLASSES
//config: bool "Enable character classes (such as [:upper:])"
//config: default y
//config: depends on TR
//config: help
-//config: Enable character classes, enabling commands such as:
-//config: tr [:upper:] [:lower:] to convert input into lowercase.
+//config: Enable character classes, enabling commands such as:
+//config: tr [:upper:] [:lower:] to convert input into lowercase.
//config:
//config:config FEATURE_TR_EQUIV
//config: bool "Enable equivalence classes"
//config: default y
//config: depends on TR
//config: help
-//config: Enable equivalence classes, which essentially add the enclosed
-//config: character to the current set. For instance, tr [=a=] xyz would
-//config: replace all instances of 'a' with 'xyz'. This option is mainly
-//config: useful for cases when no other way of expressing a character
-//config: is possible.
+//config: Enable equivalence classes, which essentially add the enclosed
+//config: character to the current set. For instance, tr [=a=] xyz would
+//config: replace all instances of 'a' with 'xyz'. This option is mainly
+//config: useful for cases when no other way of expressing a character
+//config: is possible.
//applet:IF_TR(APPLET(tr, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/true.c b/coreutils/true.c
index 29386b021..400388c34 100644
--- a/coreutils/true.c
+++ b/coreutils/true.c
@@ -10,7 +10,7 @@
//config: bool "true (tiny)"
//config: default y
//config: help
-//config: true returns an exit code of TRUE (0).
+//config: true returns an exit code of TRUE (0).
//applet:IF_TRUE(APPLET_NOFORK(true, true, BB_DIR_BIN, BB_SUID_DROP, true))
diff --git a/coreutils/truncate.c b/coreutils/truncate.c
index eefe2b4fc..f67abaf40 100644
--- a/coreutils/truncate.c
+++ b/coreutils/truncate.c
@@ -9,8 +9,8 @@
//config: bool "truncate (4.7 kb)"
//config: default y
//config: help
-//config: truncate truncates files to a given size. If a file does
-//config: not exist, it is created unless told otherwise.
+//config: truncate truncates files to a given size. If a file does
+//config: not exist, it is created unless told otherwise.
//applet:IF_TRUNCATE(APPLET_NOFORK(truncate, truncate, BB_DIR_USR_BIN, BB_SUID_DROP, truncate))
diff --git a/coreutils/tty.c b/coreutils/tty.c
index 9a5f1ef52..331941a01 100644
--- a/coreutils/tty.c
+++ b/coreutils/tty.c
@@ -10,8 +10,8 @@
//config: bool "tty (3.3 kb)"
//config: default y
//config: help
-//config: tty is used to print the name of the current terminal to
-//config: standard output.
+//config: tty is used to print the name of the current terminal to
+//config: standard output.
//applet:IF_TTY(APPLET(tty, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/uname.c b/coreutils/uname.c
index 8a33cf3b5..aad58cab0 100644
--- a/coreutils/uname.c
+++ b/coreutils/uname.c
@@ -46,22 +46,22 @@
//config: bool "uname (3.7 kb)"
//config: default y
//config: help
-//config: uname is used to print system information.
+//config: uname is used to print system information.
//config:
//config:config UNAME_OSNAME
//config: string "Operating system name"
//config: default "GNU/Linux"
//config: depends on UNAME
//config: help
-//config: Sets the operating system name reported by uname -o. The
-//config: default is "GNU/Linux".
+//config: Sets the operating system name reported by uname -o. The
+//config: default is "GNU/Linux".
//config:
//can't use "ARCH" for this applet, all hell breaks loose in build system :)
//config:config BB_ARCH
//config: bool "arch (1.6 kb)"
//config: default y
//config: help
-//config: Same as uname -m.
+//config: Same as uname -m.
//applet:IF_UNAME(APPLET(uname, BB_DIR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/coreutils/uniq.c b/coreutils/uniq.c
index 3f9c56e74..f71557b67 100644
--- a/coreutils/uniq.c
+++ b/coreutils/uniq.c
@@ -10,7 +10,7 @@
//config: bool "uniq (4.8 kb)"
//config: default y
//config: help
-//config: uniq is used to remove duplicate lines from a sorted file.
+//config: uniq is used to remove duplicate lines from a sorted file.
//applet:IF_UNIQ(APPLET(uniq, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/unlink.c b/coreutils/unlink.c
index fcc86da97..3322d5b47 100644
--- a/coreutils/unlink.c
+++ b/coreutils/unlink.c
@@ -9,7 +9,7 @@
//config: bool "unlink (3.5 kb)"
//config: default y
//config: help
-//config: unlink deletes a file by calling unlink()
+//config: unlink deletes a file by calling unlink()
//applet:IF_UNLINK(APPLET(unlink, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/usleep.c b/coreutils/usleep.c
index 1675b2fc9..7c25aada1 100644
--- a/coreutils/usleep.c
+++ b/coreutils/usleep.c
@@ -10,7 +10,7 @@
//config: bool "usleep (1.1 kb)"
//config: default y
//config: help
-//config: usleep is used to pause for a specified number of microseconds.
+//config: usleep is used to pause for a specified number of microseconds.
//applet:IF_USLEEP(APPLET_NOFORK(usleep, usleep, BB_DIR_BIN, BB_SUID_DROP, usleep))
diff --git a/coreutils/uudecode.c b/coreutils/uudecode.c
index 418d0238f..4e72e86ee 100644
--- a/coreutils/uudecode.c
+++ b/coreutils/uudecode.c
@@ -14,7 +14,7 @@
//config: bool "uudecode (5.9 kb)"
//config: default y
//config: help
-//config: uudecode is used to decode a uuencoded file.
+//config: uudecode is used to decode a uuencoded file.
//applet:IF_UUDECODE(APPLET(uudecode, BB_DIR_USR_BIN, BB_SUID_DROP))
@@ -179,7 +179,7 @@ int uudecode_main(int argc UNUSED_PARAM, char **argv)
//config: bool "base64 (5 kb)"
//config: default y
//config: help
-//config: Base64 encode and decode
+//config: Base64 encode and decode
//usage:#define base64_trivial_usage
//usage: "[-d] [FILE]"
diff --git a/coreutils/uuencode.c b/coreutils/uuencode.c
index cd167aeda..7164f838a 100644
--- a/coreutils/uuencode.c
+++ b/coreutils/uuencode.c
@@ -11,7 +11,7 @@
//config: bool "uuencode (4.6 kb)"
//config: default y
//config: help
-//config: uuencode is used to uuencode a file.
+//config: uuencode is used to uuencode a file.
//applet:IF_UUENCODE(APPLET(uuencode, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/wc.c b/coreutils/wc.c
index 716119d6c..c74b7a65f 100644
--- a/coreutils/wc.c
+++ b/coreutils/wc.c
@@ -36,15 +36,15 @@
//config: bool "wc (4.4 kb)"
//config: default y
//config: help
-//config: wc is used to print the number of bytes, words, and lines,
-//config: in specified files.
+//config: wc is used to print the number of bytes, words, and lines,
+//config: in specified files.
//config:
//config:config FEATURE_WC_LARGE
//config: bool "Support very large counts"
//config: default y
//config: depends on WC
//config: help
-//config: Use "unsigned long long" for counter variables.
+//config: Use "unsigned long long" for counter variables.
//applet:IF_WC(APPLET(wc, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/coreutils/who.c b/coreutils/who.c
index 73167904f..91f99138c 100644
--- a/coreutils/who.c
+++ b/coreutils/who.c
@@ -17,26 +17,26 @@
*----------------------------------------------------------------------
*/
//config:config WHO
-//config: bool "who (3.7 kb)"
-//config: default y
-//config: depends on FEATURE_UTMP
-//config: help
-//config: who is used to show who is logged on.
+//config: bool "who (3.7 kb)"
+//config: default y
+//config: depends on FEATURE_UTMP
+//config: help
+//config: Print users currently logged on.
//config:
// procps-ng has this variation of "who":
//config:config W
-//config: bool "w (3.7 kb)"
-//config: default y
-//config: depends on FEATURE_UTMP
-//config: help
-//config: w is used to show who is logged on.
+//config: bool "w (3.7 kb)"
+//config: default y
+//config: depends on FEATURE_UTMP
+//config: help
+//config: Print users currently logged on.
//config:
//config:config USERS
-//config: bool "users (3.2 kb)"
-//config: default y
-//config: depends on FEATURE_UTMP
-//config: help
-//config: Print users currently logged on.
+//config: bool "users (3.2 kb)"
+//config: default y
+//config: depends on FEATURE_UTMP
+//config: help
+//config: Print users currently logged on.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_USERS(APPLET_ODDNAME(users, who, BB_DIR_USR_BIN, BB_SUID_DROP, users))
diff --git a/coreutils/whoami.c b/coreutils/whoami.c
index 02a51084a..9dab15817 100644
--- a/coreutils/whoami.c
+++ b/coreutils/whoami.c
@@ -10,8 +10,8 @@
//config: bool "whoami (2.9 kb)"
//config: default y
//config: help
-//config: whoami is used to print the username of the current
-//config: user id (same as id -un).
+//config: whoami is used to print the username of the current
+//config: user id (same as id -un).
//applet:IF_WHOAMI(APPLET_NOFORK(whoami, whoami, BB_DIR_USR_BIN, BB_SUID_DROP, whoami))
diff --git a/coreutils/yes.c b/coreutils/yes.c
index e8edc0c0d..493b7b1c3 100644
--- a/coreutils/yes.c
+++ b/coreutils/yes.c
@@ -14,8 +14,8 @@
//config: bool "yes (956 bytes)"
//config: default y
//config: help
-//config: yes is used to repeatedly output a specific string, or
-//config: the default string `y'.
+//config: yes is used to repeatedly output a specific string, or
+//config: the default string `y'.
//applet:IF_YES(APPLET_NOFORK(yes, yes, BB_DIR_USR_BIN, BB_SUID_DROP, yes))
diff --git a/debianutils/pipe_progress.c b/debianutils/pipe_progress.c
index af5de2d52..e6b7601fa 100644
--- a/debianutils/pipe_progress.c
+++ b/debianutils/pipe_progress.c
@@ -10,7 +10,7 @@
//config: bool "pipe_progress (225 bytes)"
//config: default y
//config: help
-//config: Display a dot to indicate pipe activity.
+//config: Display a dot to indicate pipe activity.
//applet:IF_PIPE_PROGRESS(APPLET(pipe_progress, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/debianutils/run_parts.c b/debianutils/run_parts.c
index 011066bd4..c6a90a486 100644
--- a/debianutils/run_parts.c
+++ b/debianutils/run_parts.c
@@ -26,16 +26,16 @@
//config: bool "run-parts (5.6 kb)"
//config: default y
//config: help
-//config: run-parts is a utility designed to run all the scripts in a directory.
+//config: run-parts is a utility designed to run all the scripts in a directory.
//config:
-//config: It is useful to set up a directory like cron.daily, where you need to
-//config: execute all the scripts in that directory.
+//config: It is useful to set up a directory like cron.daily, where you need to
+//config: execute all the scripts in that directory.
//config:
-//config: In this implementation of run-parts some features (such as report
-//config: mode) are not implemented.
+//config: In this implementation of run-parts some features (such as report
+//config: mode) are not implemented.
//config:
-//config: Unless you know that run-parts is used in some of your scripts
-//config: you can safely say N here.
+//config: Unless you know that run-parts is used in some of your scripts
+//config: you can safely say N here.
//config:
//config:config FEATURE_RUN_PARTS_LONG_OPTIONS
//config: bool "Enable long options"
@@ -47,9 +47,9 @@
//config: default y
//config: depends on RUN_PARTS
//config: help
-//config: Support additional options:
-//config: -l --list print the names of the all matching files (not
-//config: limited to executables), but don't actually run them.
+//config: Support additional options:
+//config: -l --list print the names of the all matching files (not
+//config: limited to executables), but don't actually run them.
//applet:IF_RUN_PARTS(APPLET_ODDNAME(run-parts, run_parts, BB_DIR_BIN, BB_SUID_DROP, run_parts))
diff --git a/debianutils/start_stop_daemon.c b/debianutils/start_stop_daemon.c
index 584158fe8..9d60b2c7f 100644
--- a/debianutils/start_stop_daemon.c
+++ b/debianutils/start_stop_daemon.c
@@ -60,9 +60,9 @@ Misc options:
//config: bool "start-stop-daemon (12 kb)"
//config: default y
//config: help
-//config: start-stop-daemon is used to control the creation and
-//config: termination of system-level processes, usually the ones
-//config: started during the startup of the system.
+//config: start-stop-daemon is used to control the creation and
+//config: termination of system-level processes, usually the ones
+//config: started during the startup of the system.
//config:
//config:config FEATURE_START_STOP_DAEMON_LONG_OPTIONS
//config: bool "Enable long options"
@@ -74,9 +74,9 @@ Misc options:
//config: default y
//config: depends on START_STOP_DAEMON
//config: help
-//config: -o|--oknodo ignored since we exit with 0 anyway
-//config: -v|--verbose
-//config: -N|--nicelevel N
+//config: -o|--oknodo ignored since we exit with 0 anyway
+//config: -v|--verbose
+//config: -N|--nicelevel N
//applet:IF_START_STOP_DAEMON(APPLET_ODDNAME(start-stop-daemon, start_stop_daemon, BB_DIR_SBIN, BB_SUID_DROP, start_stop_daemon))
diff --git a/debianutils/which.c b/debianutils/which.c
index bdf6b9b14..3197ddac1 100644
--- a/debianutils/which.c
+++ b/debianutils/which.c
@@ -9,8 +9,8 @@
//config: bool "which (3.7 kb)"
//config: default y
//config: help
-//config: which is used to find programs in your PATH and
-//config: print out their pathnames.
+//config: which is used to find programs in your PATH and
+//config: print out their pathnames.
//applet:IF_WHICH(APPLET(which, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/e2fsprogs/chattr.c b/e2fsprogs/chattr.c
index f84ff0d0c..72327d728 100644
--- a/e2fsprogs/chattr.c
+++ b/e2fsprogs/chattr.c
@@ -13,7 +13,7 @@
//config: bool "chattr (3.2 kb)"
//config: default y
//config: help
-//config: chattr changes the file attributes on a second extended file system.
+//config: chattr changes the file attributes on a second extended file system.
//applet:IF_CHATTR(APPLET(chattr, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/e2fsprogs/fsck.c b/e2fsprogs/fsck.c
index 8d03e0cee..1c285bb92 100644
--- a/e2fsprogs/fsck.c
+++ b/e2fsprogs/fsck.c
@@ -37,9 +37,9 @@
//config: bool "fsck (6.7 kb)"
//config: default y
//config: help
-//config: fsck is used to check and optionally repair one or more filesystems.
-//config: In actuality, fsck is simply a front-end for the various file system
-//config: checkers (fsck.fstype) available under Linux.
+//config: fsck is used to check and optionally repair one or more filesystems.
+//config: In actuality, fsck is simply a front-end for the various file system
+//config: checkers (fsck.fstype) available under Linux.
//applet:IF_FSCK(APPLET(fsck, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/e2fsprogs/lsattr.c b/e2fsprogs/lsattr.c
index f59fe93a2..756d26832 100644
--- a/e2fsprogs/lsattr.c
+++ b/e2fsprogs/lsattr.c
@@ -14,7 +14,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: lsattr lists the file attributes on a second extended file system.
+//config: lsattr lists the file attributes on a second extended file system.
//applet:IF_LSATTR(APPLET(lsattr, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/e2fsprogs/tune2fs.c b/e2fsprogs/tune2fs.c
index d9fac4e42..95411db5f 100644
--- a/e2fsprogs/tune2fs.c
+++ b/e2fsprogs/tune2fs.c
@@ -10,8 +10,8 @@
//config: bool "tune2fs (4.4 kb)"
//config: default n # off: it is too limited compared to upstream version
//config: help
-//config: tune2fs allows the system administrator to adjust various tunable
-//config: filesystem parameters on Linux ext2/ext3 filesystems.
+//config: tune2fs allows the system administrator to adjust various tunable
+//config: filesystem parameters on Linux ext2/ext3 filesystems.
//applet:IF_TUNE2FS(APPLET(tune2fs, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/editors/Config.src b/editors/Config.src
index 8f2b265bd..0920bc494 100644
--- a/editors/Config.src
+++ b/editors/Config.src
@@ -12,7 +12,7 @@ config FEATURE_ALLOW_EXEC
default y
depends on VI || AWK
help
- Enables vi and awk features which allow user to execute
- shell commands (using system() C call).
+ Enables vi and awk features which allow user to execute
+ shell commands (using system() C call).
endmenu
diff --git a/editors/awk.c b/editors/awk.c
index 9d859b820..aa927db1a 100644
--- a/editors/awk.c
+++ b/editors/awk.c
@@ -11,27 +11,27 @@
//config: bool "awk (22 kb)"
//config: default y
//config: help
-//config: Awk is used as a pattern scanning and processing language. This is
-//config: the BusyBox implementation of that programming language.
+//config: Awk is used as a pattern scanning and processing language. This is
+//config: the BusyBox implementation of that programming language.
//config:
//config:config FEATURE_AWK_LIBM
//config: bool "Enable math functions (requires libm)"
//config: default y
//config: depends on AWK
//config: help
-//config: Enable math functions of the Awk programming language.
-//config: NOTE: This requires libm to be present for linking.
+//config: Enable math functions of the Awk programming language.
+//config: NOTE: This requires libm to be present for linking.
//config:
//config:config FEATURE_AWK_GNU_EXTENSIONS
//config: bool "Enable a few GNU extensions"
//config: default y
//config: depends on AWK
//config: help
-//config: Enable a few features from gawk:
-//config: * command line option -e AWK_PROGRAM
-//config: * simultaneous use of -f and -e on the command line.
-//config: This enables the use of awk library files.
-//config: Ex: awk -f mylib.awk -e '{print myfunction($1);}' ...
+//config: Enable a few features from gawk:
+//config: * command line option -e AWK_PROGRAM
+//config: * simultaneous use of -f and -e on the command line.
+//config: This enables the use of awk library files.
+//config: Example: awk -f mylib.awk -e '{print myfunction($1);}' ...
//applet:IF_AWK(APPLET_NOEXEC(awk, awk, BB_DIR_USR_BIN, BB_SUID_DROP, awk))
diff --git a/editors/cmp.c b/editors/cmp.c
index 6e5500c17..f53d9603c 100644
--- a/editors/cmp.c
+++ b/editors/cmp.c
@@ -14,8 +14,8 @@
//config: bool "cmp (5.4 kb)"
//config: default y
//config: help
-//config: cmp is used to compare two files and returns the result
-//config: to standard output.
+//config: cmp is used to compare two files and returns the result
+//config: to standard output.
//kbuild:lib-$(CONFIG_CMP) += cmp.o
diff --git a/editors/diff.c b/editors/diff.c
index b6a5ca606..03c13908e 100644
--- a/editors/diff.c
+++ b/editors/diff.c
@@ -80,9 +80,9 @@
//config: bool "diff (13 kb)"
//config: default y
//config: help
-//config: diff compares two files or directories and outputs the
-//config: differences between them in a form that can be given to
-//config: the patch command.
+//config: diff compares two files or directories and outputs the
+//config: differences between them in a form that can be given to
+//config: the patch command.
//config:
//config:config FEATURE_DIFF_LONG_OPTIONS
//config: bool "Enable long options"
@@ -94,8 +94,8 @@
//config: default y
//config: depends on DIFF
//config: help
-//config: This option enables support for directory and subdirectory
-//config: comparison.
+//config: This option enables support for directory and subdirectory
+//config: comparison.
//kbuild:lib-$(CONFIG_DIFF) += diff.o
diff --git a/editors/ed.c b/editors/ed.c
index 863a99366..c594d3da1 100644
--- a/editors/ed.c
+++ b/editors/ed.c
@@ -11,9 +11,9 @@
//config: bool "ed (25 kb)"
//config: default y
//config: help
-//config: The original 1970's Unix text editor, from the days of teletypes.
-//config: Small, simple, evil. Part of SUSv3. If you're not already using
-//config: this, you don't need it.
+//config: The original 1970's Unix text editor, from the days of teletypes.
+//config: Small, simple, evil. Part of SUSv3. If you're not already using
+//config: this, you don't need it.
//kbuild:lib-$(CONFIG_ED) += ed.o
diff --git a/editors/patch.c b/editors/patch.c
index 86a0193a1..81316fae3 100644
--- a/editors/patch.c
+++ b/editors/patch.c
@@ -26,7 +26,7 @@
//config: bool "patch (9.1 kb)"
//config: default y
//config: help
-//config: Apply a unified diff formatted patch.
+//config: Apply a unified diff formatted patch.
//applet:IF_PATCH(APPLET(patch, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/editors/sed.c b/editors/sed.c
index c5df5d9e7..bec20040a 100644
--- a/editors/sed.c
+++ b/editors/sed.c
@@ -60,8 +60,8 @@
//config: bool "sed (12 kb)"
//config: default y
//config: help
-//config: sed is used to perform text transformations on a file
-//config: or input from a pipeline.
+//config: sed is used to perform text transformations on a file
+//config: or input from a pipeline.
//kbuild:lib-$(CONFIG_SED) += sed.o
diff --git a/editors/vi.c b/editors/vi.c
index 015938585..116022c93 100644
--- a/editors/vi.c
+++ b/editors/vi.c
@@ -24,10 +24,10 @@
//config: bool "vi (22 kb)"
//config: default y
//config: help
-//config: 'vi' is a text editor. More specifically, it is the One True
-//config: text editor <grin>. It does, however, have a rather steep
-//config: learning curve. If you are not already comfortable with 'vi'
-//config: you may wish to use something else.
+//config: 'vi' is a text editor. More specifically, it is the One True
+//config: text editor <grin>. It does, however, have a rather steep
+//config: learning curve. If you are not already comfortable with 'vi'
+//config: you may wish to use something else.
//config:
//config:config FEATURE_VI_MAX_LEN
//config: int "Maximum screen width"
@@ -35,77 +35,77 @@
//config: default 4096
//config: depends on VI
//config: help
-//config: Contrary to what you may think, this is not eating much.
-//config: Make it smaller than 4k only if you are very limited on memory.
+//config: Contrary to what you may think, this is not eating much.
+//config: Make it smaller than 4k only if you are very limited on memory.
//config:
//config:config FEATURE_VI_8BIT
//config: bool "Allow to display 8-bit chars (otherwise shows dots)"
//config: default n
//config: depends on VI
//config: help
-//config: If your terminal can display characters with high bit set,
-//config: you may want to enable this. Note: vi is not Unicode-capable.
-//config: If your terminal combines several 8-bit bytes into one character
-//config: (as in Unicode mode), this will not work properly.
+//config: If your terminal can display characters with high bit set,
+//config: you may want to enable this. Note: vi is not Unicode-capable.
+//config: If your terminal combines several 8-bit bytes into one character
+//config: (as in Unicode mode), this will not work properly.
//config:
//config:config FEATURE_VI_COLON
//config: bool "Enable \":\" colon commands (no \"ex\" mode)"
//config: default y
//config: depends on VI
//config: help
-//config: Enable a limited set of colon commands. This does not
-//config: provide an "ex" mode.
+//config: Enable a limited set of colon commands. This does not
+//config: provide an "ex" mode.
//config:
//config:config FEATURE_VI_YANKMARK
//config: bool "Enable yank/put commands and mark cmds"
//config: default y
//config: depends on VI
//config: help
-//config: This enables you to use yank and put, as well as mark.
+//config: This enables you to use yank and put, as well as mark.
//config:
//config:config FEATURE_VI_SEARCH
//config: bool "Enable search and replace cmds"
//config: default y
//config: depends on VI
//config: help
-//config: Select this if you wish to be able to do search and replace.
+//config: Select this if you wish to be able to do search and replace.
//config:
//config:config FEATURE_VI_REGEX_SEARCH
//config: bool "Enable regex in search and replace"
//config: default n # Uses GNU regex, which may be unavailable. FIXME
//config: depends on FEATURE_VI_SEARCH
//config: help
-//config: Use extended regex search.
+//config: Use extended regex search.
//config:
//config:config FEATURE_VI_USE_SIGNALS
//config: bool "Catch signals"
//config: default y
//config: depends on VI
//config: help
-//config: Selecting this option will make vi signal aware. This will support
-//config: SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms.
+//config: Selecting this option will make vi signal aware. This will support
+//config: SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms.
//config:
//config:config FEATURE_VI_DOT_CMD
//config: bool "Remember previous cmd and \".\" cmd"
//config: default y
//config: depends on VI
//config: help
-//config: Make vi remember the last command and be able to repeat it.
+//config: Make vi remember the last command and be able to repeat it.
//config:
//config:config FEATURE_VI_READONLY
//config: bool "Enable -R option and \"view\" mode"
//config: default y
//config: depends on VI
//config: help
-//config: Enable the read-only command line option, which allows the user to
-//config: open a file in read-only mode.
+//config: Enable the read-only command line option, which allows the user to
+//config: open a file in read-only mode.
//config:
//config:config FEATURE_VI_SETOPTS
//config: bool "Enable settable options, ai ic showmatch"
//config: default y
//config: depends on VI
//config: help
-//config: Enable the editor to set some (ai, ic, showmatch) options.
+//config: Enable the editor to set some (ai, ic, showmatch) options.
//config:
//config:config FEATURE_VI_SET
//config: bool "Support :set"
@@ -117,37 +117,37 @@
//config: default y
//config: depends on VI
//config: help
-//config: Behave nicely with terminals that get resized.
+//config: Behave nicely with terminals that get resized.
//config:
//config:config FEATURE_VI_ASK_TERMINAL
//config: bool "Use 'tell me cursor position' ESC sequence to measure window"
//config: default y
//config: depends on VI
//config: help
-//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
-//config: this option makes vi perform a last-ditch effort to find it:
-//config: position cursor to 999,999 and ask terminal to report real
-//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin.
-//config: This is not clean but helps a lot on serial lines and such.
+//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+//config: this option makes vi perform a last-ditch effort to find it:
+//config: position cursor to 999,999 and ask terminal to report real
+//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+//config: This is not clean but helps a lot on serial lines and such.
//config:
//config:config FEATURE_VI_UNDO
//config: bool "Support undo command \"u\""
//config: default y
//config: depends on VI
//config: help
-//config: Support the 'u' command to undo insertion, deletion, and replacement
-//config: of text.
+//config: Support the 'u' command to undo insertion, deletion, and replacement
+//config: of text.
//config:
//config:config FEATURE_VI_UNDO_QUEUE
//config: bool "Enable undo operation queuing"
//config: default y
//config: depends on FEATURE_VI_UNDO
//config: help
-//config: The vi undo functions can use an intermediate queue to greatly lower
-//config: malloc() calls and overhead. When the maximum size of this queue is
-//config: reached, the contents of the queue are committed to the undo stack.
-//config: This increases the size of the undo code and allows some undo
-//config: operations (especially un-typing/backspacing) to be far more useful.
+//config: The vi undo functions can use an intermediate queue to greatly lower
+//config: malloc() calls and overhead. When the maximum size of this queue is
+//config: reached, the contents of the queue are committed to the undo stack.
+//config: This increases the size of the undo code and allows some undo
+//config: operations (especially un-typing/backspacing) to be far more useful.
//config:
//config:config FEATURE_VI_UNDO_QUEUE_MAX
//config: int "Maximum undo character queue size"
@@ -155,13 +155,13 @@
//config: range 32 65536
//config: depends on FEATURE_VI_UNDO_QUEUE
//config: help
-//config: This option sets the number of bytes used at runtime for the queue.
-//config: Smaller values will create more undo objects and reduce the amount
-//config: of typed or backspaced characters that are grouped into one undo
-//config: operation; larger values increase the potential size of each undo
-//config: and will generally malloc() larger objects and less frequently.
-//config: Unless you want more (or less) frequent "undo points" while typing,
-//config: you should probably leave this unchanged.
+//config: This option sets the number of bytes used at runtime for the queue.
+//config: Smaller values will create more undo objects and reduce the amount
+//config: of typed or backspaced characters that are grouped into one undo
+//config: operation; larger values increase the potential size of each undo
+//config: and will generally malloc() larger objects and less frequently.
+//config: Unless you want more (or less) frequent "undo points" while typing,
+//config: you should probably leave this unchanged.
//applet:IF_VI(APPLET(vi, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/findutils/find.c b/findutils/find.c
index 70ad03208..69baf065d 100644
--- a/findutils/find.c
+++ b/findutils/find.c
@@ -57,33 +57,33 @@
//config: bool "find (14 kb)"
//config: default y
//config: help
-//config: find is used to search your system to find specified files.
+//config: find is used to search your system to find specified files.
//config:
//config:config FEATURE_FIND_PRINT0
//config: bool "Enable -print0: NUL-terminated output"
//config: default y
//config: depends on FIND
//config: help
-//config: Causes output names to be separated by a NUL character
-//config: rather than a newline. This allows names that contain
-//config: newlines and other whitespace to be more easily
-//config: interpreted by other programs.
+//config: Causes output names to be separated by a NUL character
+//config: rather than a newline. This allows names that contain
+//config: newlines and other whitespace to be more easily
+//config: interpreted by other programs.
//config:
//config:config FEATURE_FIND_MTIME
//config: bool "Enable -mtime: modified time matching"
//config: default y
//config: depends on FIND
//config: help
-//config: Allow searching based on the modification time of
-//config: files, in days.
+//config: Allow searching based on the modification time of
+//config: files, in days.
//config:
//config:config FEATURE_FIND_MMIN
//config: bool "Enable -mmin: modified time matching by minutes"
//config: default y
//config: depends on FIND
//config: help
-//config: Allow searching based on the modification time of
-//config: files, in minutes.
+//config: Allow searching based on the modification time of
+//config: files, in minutes.
//config:
//config:config FEATURE_FIND_PERM
//config: bool "Enable -perm: permissions matching"
@@ -95,8 +95,8 @@
//config: default y
//config: depends on FIND
//config: help
-//config: Enable searching based on file type (file,
-//config: directory, socket, device, etc.).
+//config: Enable searching based on file type (file,
+//config: directory, socket, device, etc.).
//config:
//config:config FEATURE_FIND_XDEV
//config: bool "Enable -xdev: 'stay in filesystem'"
@@ -113,8 +113,8 @@
//config: default y
//config: depends on FIND
//config: help
-//config: Support the 'find -newer' option for finding any files which have
-//config: modification time that is more recent than the specified FILE.
+//config: Support the 'find -newer' option for finding any files which have
+//config: modification time that is more recent than the specified FILE.
//config:
//config:config FEATURE_FIND_INUM
//config: bool "Enable -inum: inode number matching"
@@ -126,18 +126,18 @@
//config: default y
//config: depends on FIND
//config: help
-//config: Support the 'find -exec' option for executing commands based upon
-//config: the files matched.
+//config: Support the 'find -exec' option for executing commands based upon
+//config: the files matched.
//config:
//config:config FEATURE_FIND_EXEC_PLUS
//config: bool "Enable -exec ... {} +"
//config: default y
//config: depends on FEATURE_FIND_EXEC
//config: help
-//config: Support the 'find -exec ... {} +' option for executing commands
-//config: for all matched files at once.
-//config: Without this option, -exec + is a synonym for -exec ;
-//config: (IOW: it works correctly, but without expected speedup)
+//config: Support the 'find -exec ... {} +' option for executing commands
+//config: for all matched files at once.
+//config: Without this option, -exec + is a synonym for -exec ;
+//config: (IOW: it works correctly, but without expected speedup)
//config:
//config:config FEATURE_FIND_USER
//config: bool "Enable -user: username/uid matching"
@@ -154,23 +154,23 @@
//config: default y
//config: depends on FIND
//config: help
-//config: Support the '!' operator to invert the test results.
-//config: If 'Enable full-blown desktop' is enabled, then will also support
-//config: the non-POSIX notation '-not'.
+//config: Support the '!' operator to invert the test results.
+//config: If 'Enable full-blown desktop' is enabled, then will also support
+//config: the non-POSIX notation '-not'.
//config:
//config:config FEATURE_FIND_DEPTH
//config: bool "Enable -depth"
//config: default y
//config: depends on FIND
//config: help
-//config: Process each directory's contents before the directory itself.
+//config: Process each directory's contents before the directory itself.
//config:
//config:config FEATURE_FIND_PAREN
//config: bool "Enable parens in options"
//config: default y
//config: depends on FIND
//config: help
-//config: Enable usage of parens '(' to specify logical order of arguments.
+//config: Enable usage of parens '(' to specify logical order of arguments.
//config:
//config:config FEATURE_FIND_SIZE
//config: bool "Enable -size: file size matching"
@@ -182,45 +182,45 @@
//config: default y
//config: depends on FIND
//config: help
-//config: If the file is a directory, don't descend into it. Useful for
-//config: exclusion .svn and CVS directories.
+//config: If the file is a directory, don't descend into it. Useful for
+//config: exclusion .svn and CVS directories.
//config:
//config:config FEATURE_FIND_DELETE
//config: bool "Enable -delete: delete files/dirs"
//config: default y
//config: depends on FIND && FEATURE_FIND_DEPTH
//config: help
-//config: Support the 'find -delete' option for deleting files and directories.
-//config: WARNING: This option can do much harm if used wrong. Busybox will not
-//config: try to protect the user from doing stupid things. Use with care.
+//config: Support the 'find -delete' option for deleting files and directories.
+//config: WARNING: This option can do much harm if used wrong. Busybox will not
+//config: try to protect the user from doing stupid things. Use with care.
//config:
//config:config FEATURE_FIND_PATH
//config: bool "Enable -path: match pathname with shell pattern"
//config: default y
//config: depends on FIND
//config: help
-//config: The -path option matches whole pathname instead of just filename.
+//config: The -path option matches whole pathname instead of just filename.
//config:
//config:config FEATURE_FIND_REGEX
//config: bool "Enable -regex: match pathname with regex"
//config: default y
//config: depends on FIND
//config: help
-//config: The -regex option matches whole pathname against regular expression.
+//config: The -regex option matches whole pathname against regular expression.
//config:
//config:config FEATURE_FIND_CONTEXT
//config: bool "Enable -context: security context matching"
//config: default n
//config: depends on FIND && SELINUX
//config: help
-//config: Support the 'find -context' option for matching security context.
+//config: Support the 'find -context' option for matching security context.
//config:
//config:config FEATURE_FIND_LINKS
//config: bool "Enable -links: link count matching"
//config: default y
//config: depends on FIND
//config: help
-//config: Support the 'find -links' option for matching number of links.
+//config: Support the 'find -links' option for matching number of links.
//applet:IF_FIND(APPLET_NOEXEC(find, find, BB_DIR_USR_BIN, BB_SUID_DROP, find))
diff --git a/findutils/grep.c b/findutils/grep.c
index cbbad731c..568ab12c2 100644
--- a/findutils/grep.c
+++ b/findutils/grep.c
@@ -22,28 +22,28 @@
//config: bool "grep (8.5 kb)"
//config: default y
//config: help
-//config: grep is used to search files for a specified pattern.
+//config: grep is used to search files for a specified pattern.
//config:
//config:config EGREP
//config: bool "egrep (7.6 kb)"
//config: default y
//config: help
-//config: Alias to "grep -E".
+//config: Alias to "grep -E".
//config:
//config:config FGREP
//config: bool "fgrep (7.6 kb)"
//config: default y
//config: help
-//config: Alias to "grep -F".
+//config: Alias to "grep -F".
//config:
//config:config FEATURE_GREP_CONTEXT
//config: bool "Enable before and after context flags (-A, -B and -C)"
//config: default y
//config: depends on GREP || EGREP || FGREP
//config: help
-//config: Print the specified number of leading (-B) and/or trailing (-A)
-//config: context surrounding our matching lines.
-//config: Print the specified number of context lines (-C).
+//config: Print the specified number of leading (-B) and/or trailing (-A)
+//config: context surrounding our matching lines.
+//config: Print the specified number of context lines (-C).
//applet:IF_GREP(APPLET(grep, BB_DIR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/findutils/xargs.c b/findutils/xargs.c
index 078ce3bc7..2d0d1c8b9 100644
--- a/findutils/xargs.c
+++ b/findutils/xargs.c
@@ -19,47 +19,47 @@
//config: bool "xargs (6.7 kb)"
//config: default y
//config: help
-//config: xargs is used to execute a specified command for
-//config: every item from standard input.
+//config: xargs is used to execute a specified command for
+//config: every item from standard input.
//config:
//config:config FEATURE_XARGS_SUPPORT_CONFIRMATION
//config: bool "Enable -p: prompt and confirmation"
//config: default y
//config: depends on XARGS
//config: help
-//config: Support -p: prompt the user whether to run each command
-//config: line and read a line from the terminal.
+//config: Support -p: prompt the user whether to run each command
+//config: line and read a line from the terminal.
//config:
//config:config FEATURE_XARGS_SUPPORT_QUOTES
//config: bool "Enable single and double quotes and backslash"
//config: default y
//config: depends on XARGS
//config: help
-//config: Support quoting in the input.
+//config: Support quoting in the input.
//config:
//config:config FEATURE_XARGS_SUPPORT_TERMOPT
//config: bool "Enable -x: exit if -s or -n is exceeded"
//config: default y
//config: depends on XARGS
//config: help
-//config: Support -x: exit if the command size (see the -s or -n option)
-//config: is exceeded.
+//config: Support -x: exit if the command size (see the -s or -n option)
+//config: is exceeded.
//config:
//config:config FEATURE_XARGS_SUPPORT_ZERO_TERM
//config: bool "Enable -0: NUL-terminated input"
//config: default y
//config: depends on XARGS
//config: help
-//config: Support -0: input items are terminated by a NUL character
-//config: instead of whitespace, and the quotes and backslash
-//config: are not special.
+//config: Support -0: input items are terminated by a NUL character
+//config: instead of whitespace, and the quotes and backslash
+//config: are not special.
//config:
//config:config FEATURE_XARGS_SUPPORT_REPL_STR
//config: bool "Enable -I STR: string to replace"
//config: default y
//config: depends on XARGS
//config: help
-//config: Support -I STR and -i[STR] options.
+//config: Support -I STR and -i[STR] options.
//applet:IF_XARGS(APPLET_NOEXEC(xargs, xargs, BB_DIR_USR_BIN, BB_SUID_DROP, xargs))
diff --git a/init/bootchartd.c b/init/bootchartd.c
index d7d6f1483..b5dd17439 100644
--- a/init/bootchartd.c
+++ b/init/bootchartd.c
@@ -11,40 +11,40 @@
//config: bool "bootchartd (10 kb)"
//config: default y
//config: help
-//config: bootchartd is commonly used to profile the boot process
-//config: for the purpose of speeding it up. In this case, it is started
-//config: by the kernel as the init process. This is configured by adding
-//config: the init=/sbin/bootchartd option to the kernel command line.
+//config: bootchartd is commonly used to profile the boot process
+//config: for the purpose of speeding it up. In this case, it is started
+//config: by the kernel as the init process. This is configured by adding
+//config: the init=/sbin/bootchartd option to the kernel command line.
//config:
-//config: It can also be used to monitor the resource usage of a specific
-//config: application or the running system in general. In this case,
-//config: bootchartd is started interactively by running bootchartd start
-//config: and stopped using bootchartd stop.
+//config: It can also be used to monitor the resource usage of a specific
+//config: application or the running system in general. In this case,
+//config: bootchartd is started interactively by running bootchartd start
+//config: and stopped using bootchartd stop.
//config:
//config:config FEATURE_BOOTCHARTD_BLOATED_HEADER
//config: bool "Compatible, bloated header"
//config: default y
//config: depends on BOOTCHARTD
//config: help
-//config: Create extended header file compatible with "big" bootchartd.
-//config: "Big" bootchartd is a shell script and it dumps some
-//config: "convenient" info int the header, such as:
-//config: title = Boot chart for `hostname` (`date`)
-//config: system.uname = `uname -srvm`
-//config: system.release = `cat /etc/DISTRO-release`
-//config: system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount)
-//config: system.kernel.options = `cat /proc/cmdline`
-//config: This data is not mandatory for bootchart graph generation,
-//config: and is considered bloat. Nevertheless, this option
-//config: makes bootchartd applet to dump a subset of it.
+//config: Create extended header file compatible with "big" bootchartd.
+//config: "Big" bootchartd is a shell script and it dumps some
+//config: "convenient" info int the header, such as:
+//config: title = Boot chart for `hostname` (`date`)
+//config: system.uname = `uname -srvm`
+//config: system.release = `cat /etc/DISTRO-release`
+//config: system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount)
+//config: system.kernel.options = `cat /proc/cmdline`
+//config: This data is not mandatory for bootchart graph generation,
+//config: and is considered bloat. Nevertheless, this option
+//config: makes bootchartd applet to dump a subset of it.
//config:
//config:config FEATURE_BOOTCHARTD_CONFIG_FILE
//config: bool "Support bootchartd.conf"
//config: default y
//config: depends on BOOTCHARTD
//config: help
-//config: Enable reading and parsing of $PWD/bootchartd.conf
-//config: and /etc/bootchartd.conf files.
+//config: Enable reading and parsing of $PWD/bootchartd.conf
+//config: and /etc/bootchartd.conf files.
#include "libbb.h"
#include "common_bufsiz.h"
diff --git a/init/halt.c b/init/halt.c
index e6eb28fc9..632c6cc56 100644
--- a/init/halt.c
+++ b/init/halt.c
@@ -11,39 +11,39 @@
//config: bool "halt (3.7 kb)"
//config: default y
//config: help
-//config: Stop all processes and halt the system.
+//config: Stop all processes and halt the system.
//config:
//config:config POWEROFF
//config: bool "poweroff (3.7 kb)"
//config: default y
//config: help
-//config: Stop all processes and power off the system.
+//config: Stop all processes and power off the system.
//config:
//config:config REBOOT
//config: bool "reboot (3.7 kb)"
//config: default y
//config: help
-//config: Stop all processes and reboot the system.
+//config: Stop all processes and reboot the system.
//config:
//config:config FEATURE_CALL_TELINIT
//config: bool "Call telinit on shutdown and reboot"
//config: default y
//config: depends on (HALT || POWEROFF || REBOOT) && !INIT
//config: help
-//config: Call an external program (normally telinit) to facilitate
-//config: a switch to a proper runlevel.
+//config: Call an external program (normally telinit) to facilitate
+//config: a switch to a proper runlevel.
//config:
-//config: This option is only available if you selected halt and friends,
-//config: but did not select init.
+//config: This option is only available if you selected halt and friends,
+//config: but did not select init.
//config:
//config:config TELINIT_PATH
//config: string "Path to telinit executable"
//config: default "/sbin/telinit"
//config: depends on FEATURE_CALL_TELINIT
//config: help
-//config: When busybox halt and friends have to call external telinit
-//config: to facilitate proper shutdown, this path is to be used when
-//config: locating telinit executable.
+//config: When busybox halt and friends have to call external telinit
+//config: to facilitate proper shutdown, this path is to be used when
+//config: locating telinit executable.
//applet:IF_HALT(APPLET(halt, BB_DIR_SBIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/init/init.c b/init/init.c
index 3427e1cc8..ab137a981 100644
--- a/init/init.c
+++ b/init/init.c
@@ -14,34 +14,34 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: init is the first program run when the system boots.
+//config: init is the first program run when the system boots.
//config:
//config:config LINUXRC
//config: bool "linuxrc: support running init from initrd (not initramfs)"
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: Legacy support for running init under the old-style initrd. Allows
-//config: the name linuxrc to act as init, and it doesn't assume init is PID 1.
+//config: Legacy support for running init under the old-style initrd. Allows
+//config: the name linuxrc to act as init, and it doesn't assume init is PID 1.
//config:
-//config: This does not apply to initramfs, which runs /init as PID 1 and
-//config: requires no special support.
+//config: This does not apply to initramfs, which runs /init as PID 1 and
+//config: requires no special support.
//config:
//config:config FEATURE_USE_INITTAB
//config: bool "Support reading an inittab file"
//config: default y
//config: depends on INIT || LINUXRC
//config: help
-//config: Allow init to read an inittab file when the system boot.
+//config: Allow init to read an inittab file when the system boot.
//config:
//config:config FEATURE_KILL_REMOVED
//config: bool "Support killing processes that have been removed from inittab"
//config: default n
//config: depends on FEATURE_USE_INITTAB
//config: help
-//config: When respawn entries are removed from inittab and a SIGHUP is
-//config: sent to init, this option will make init kill the processes
-//config: that have been removed.
+//config: When respawn entries are removed from inittab and a SIGHUP is
+//config: sent to init, this option will make init kill the processes
+//config: that have been removed.
//config:
//config:config FEATURE_KILL_DELAY
//config: int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED
@@ -49,34 +49,34 @@
//config: default 0
//config: depends on FEATURE_KILL_REMOVED
//config: help
-//config: With nonzero setting, init sends TERM, forks, child waits N
-//config: seconds, sends KILL and exits. Setting it too high is unwise
-//config: (child will hang around for too long and could actually kill
-//config: the wrong process!)
+//config: With nonzero setting, init sends TERM, forks, child waits N
+//config: seconds, sends KILL and exits. Setting it too high is unwise
+//config: (child will hang around for too long and could actually kill
+//config: the wrong process!)
//config:
//config:config FEATURE_INIT_SCTTY
//config: bool "Run commands with leading dash with controlling tty"
//config: default y
//config: depends on INIT || LINUXRC
//config: help
-//config: If this option is enabled, init will try to give a controlling
-//config: tty to any command which has leading hyphen (often it's "-/bin/sh").
-//config: More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)".
-//config: If device attached to STDIN_FILENO can be a ctty but is not yet
-//config: a ctty for other session, it will become this process' ctty.
-//config: This is not the traditional init behavour, but is often what you want
-//config: in an embedded system where the console is only accessed during
-//config: development or for maintenance.
-//config: NB: using cttyhack applet may work better.
+//config: If this option is enabled, init will try to give a controlling
+//config: tty to any command which has leading hyphen (often it's "-/bin/sh").
+//config: More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)".
+//config: If device attached to STDIN_FILENO can be a ctty but is not yet
+//config: a ctty for other session, it will become this process' ctty.
+//config: This is not the traditional init behavour, but is often what you want
+//config: in an embedded system where the console is only accessed during
+//config: development or for maintenance.
+//config: NB: using cttyhack applet may work better.
//config:
//config:config FEATURE_INIT_SYSLOG
//config: bool "Enable init to write to syslog"
//config: default y
//config: depends on INIT || LINUXRC
//config: help
-//config: If selected, some init messages are sent to syslog.
-//config: Otherwise, they are sent to VT #5 if linux virtual tty is detected
-//config: (if not, no separate logging is done).
+//config: If selected, some init messages are sent to syslog.
+//config: Otherwise, they are sent to VT #5 if linux virtual tty is detected
+//config: (if not, no separate logging is done).
//config:
//config:config FEATURE_INIT_QUIET
//config: bool "Be quiet on boot (no 'init started:' message)"
@@ -88,37 +88,37 @@
//config: default n # not Y because this is a debug option
//config: depends on INIT || LINUXRC
//config: help
-//config: If this option is enabled and the file /.init_enable_core
-//config: exists, then init will call setrlimit() to allow unlimited
-//config: core file sizes. If this option is disabled, processes
-//config: will not generate any core files.
+//config: If this option is enabled and the file /.init_enable_core
+//config: exists, then init will call setrlimit() to allow unlimited
+//config: core file sizes. If this option is disabled, processes
+//config: will not generate any core files.
//config:
//config:config INIT_TERMINAL_TYPE
//config: string "Initial terminal type"
//config: default "linux"
//config: depends on INIT || LINUXRC
//config: help
-//config: This is the initial value set by init for the TERM environment
-//config: variable. This variable is used by programs which make use of
-//config: extended terminal capabilities.
+//config: This is the initial value set by init for the TERM environment
+//config: variable. This variable is used by programs which make use of
+//config: extended terminal capabilities.
//config:
-//config: Note that on Linux, init attempts to detect serial terminal and
-//config: sets TERM to "vt102" if one is found.
+//config: Note that on Linux, init attempts to detect serial terminal and
+//config: sets TERM to "vt102" if one is found.
//config:
//config:config FEATURE_INIT_MODIFY_CMDLINE
//config: bool "Clear init's command line"
//config: default y
//config: depends on INIT || LINUXRC
//config: help
-//config: When launched as PID 1 and after parsing its arguments, init
-//config: wipes all the arguments but argv[0] and rewrites argv[0] to
-//config: contain only "init", so that its command line appears solely as
-//config: "init" in tools such as ps.
-//config: If this option is set to Y, init will keep its original behavior,
-//config: otherwise, all the arguments including argv[0] will be preserved,
-//config: be they parsed or ignored by init.
-//config: The original command-line used to launch init can then be
-//config: retrieved in /proc/1/cmdline on Linux, for example.
+//config: When launched as PID 1 and after parsing its arguments, init
+//config: wipes all the arguments but argv[0] and rewrites argv[0] to
+//config: contain only "init", so that its command line appears solely as
+//config: "init" in tools such as ps.
+//config: If this option is set to Y, init will keep its original behavior,
+//config: otherwise, all the arguments including argv[0] will be preserved,
+//config: be they parsed or ignored by init.
+//config: The original command-line used to launch init can then be
+//config: retrieved in /proc/1/cmdline on Linux, for example.
//applet:IF_INIT(APPLET(init, BB_DIR_SBIN, BB_SUID_DROP))
//applet:IF_LINUXRC(APPLET_ODDNAME(linuxrc, init, BB_DIR_ROOT, BB_SUID_DROP, linuxrc))
diff --git a/libbb/Config.src b/libbb/Config.src
index 16c79dbf0..9da8b65ee 100644
--- a/libbb/Config.src
+++ b/libbb/Config.src
@@ -11,14 +11,14 @@ choice
prompt "Buffer allocation policy"
default FEATURE_BUFFERS_USE_MALLOC
help
- There are 3 ways BusyBox can handle buffer allocations:
- - Use malloc. This costs code size for the call to xmalloc.
- - Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
- - Put them in BSS. This works beautifully for computers with a real
- MMU (and OS support), but wastes runtime RAM for uCLinux. This
- behavior was the only one available for BusyBox versions 0.48 and
- earlier.
+ There are 3 ways BusyBox can handle buffer allocations:
+ - Use malloc. This costs code size for the call to xmalloc.
+ - Put them on stack. For some very small machines with limited stack
+ space, this can be deadly. For most folks, this works just fine.
+ - Put them in BSS. This works beautifully for computers with a real
+ MMU (and OS support), but wastes runtime RAM for uCLinux. This
+ behavior was the only one available for BusyBox versions 0.48 and
+ earlier.
config FEATURE_BUFFERS_USE_MALLOC
bool "Allocate with Malloc"
@@ -36,52 +36,52 @@ config PASSWORD_MINLEN
default 6
range 5 32
help
- Minimum allowable password length.
+ Minimum allowable password length.
config MD5_SMALL
int "MD5: Trade bytes for speed (0:fast, 3:slow)"
default 1 # all "fast or small" options default to small
range 0 3
help
- Trade binary size versus speed for the md5sum algorithm.
- Approximate values running uClibc and hashing
- linux-2.4.4.tar.bz2 were:
- user times (sec) text size (386)
- 0 (fastest) 1.1 6144
- 1 1.4 5392
- 2 3.0 5088
- 3 (smallest) 5.1 4912
+ Trade binary size versus speed for the md5sum algorithm.
+ Approximate values running uClibc and hashing
+ linux-2.4.4.tar.bz2 were:
+ value user times (sec) text size (386)
+ 0 (fastest) 1.1 6144
+ 1 1.4 5392
+ 2 3.0 5088
+ 3 (smallest) 5.1 4912
config SHA3_SMALL
int "SHA3: Trade bytes for speed (0:fast, 1:slow)"
default 1 # all "fast or small" options default to small
range 0 1
help
- Trade binary size versus speed for the sha3sum algorithm.
- SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
- 64-bit x86: +270 bytes of code, 45% faster
- 32-bit x86: +450 bytes of code, 75% faster
+ Trade binary size versus speed for the sha3sum algorithm.
+ SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
+ 64-bit x86: +270 bytes of code, 45% faster
+ 32-bit x86: +450 bytes of code, 75% faster
config FEATURE_FAST_TOP
bool "Faster /proc scanning code (+100 bytes)"
default n # all "fast or small" options default to small
help
- This option makes top and ps ~20% faster (or 20% less CPU hungry),
- but code size is slightly bigger.
+ This option makes top and ps ~20% faster (or 20% less CPU hungry),
+ but code size is slightly bigger.
config FEATURE_ETC_NETWORKS
bool "Support /etc/networks"
default n
help
- Enable support for network names in /etc/networks. This is
- a rarely used feature which allows you to use names
- instead of IP/mask pairs in route command.
+ Enable support for network names in /etc/networks. This is
+ a rarely used feature which allows you to use names
+ instead of IP/mask pairs in route command.
config FEATURE_EDITING
bool "Command line editing"
default y
help
- Enable line editing (mainly for shell command line).
+ Enable line editing (mainly for shell command line).
config FEATURE_EDITING_MAX_LEN
int "Maximum length of input"
@@ -89,17 +89,17 @@ config FEATURE_EDITING_MAX_LEN
default 1024
depends on FEATURE_EDITING
help
- Line editing code uses on-stack buffers for storage.
- You may want to decrease this parameter if your target machine
- benefits from smaller stack usage.
+ Line editing code uses on-stack buffers for storage.
+ You may want to decrease this parameter if your target machine
+ benefits from smaller stack usage.
config FEATURE_EDITING_VI
bool "vi-style line editing commands"
default n
depends on FEATURE_EDITING
help
- Enable vi-style line editing. In shells, this mode can be
- turned on and off with "set -o vi" and "set +o vi".
+ Enable vi-style line editing. In shells, this mode can be
+ turned on and off with "set -o vi" and "set +o vi".
config FEATURE_EDITING_HISTORY
int "History size"
@@ -108,29 +108,29 @@ config FEATURE_EDITING_HISTORY
default 255
depends on FEATURE_EDITING
help
- Specify command history size (0 - disable).
+ Specify command history size (0 - disable).
config FEATURE_EDITING_SAVEHISTORY
bool "History saving"
default y
depends on FEATURE_EDITING
help
- Enable history saving in shells.
+ Enable history saving in shells.
config FEATURE_EDITING_SAVE_ON_EXIT
bool "Save history on shell exit, not after every command"
default n
depends on FEATURE_EDITING_SAVEHISTORY
help
- Save history on shell exit, not after every command.
+ Save history on shell exit, not after every command.
config FEATURE_REVERSE_SEARCH
bool "Reverse history search"
default y
depends on FEATURE_EDITING
help
- Enable readline-like Ctrl-R combination for reverse history search.
- Increases code by about 0.5k.
+ Enable readline-like Ctrl-R combination for reverse history search.
+ Increases code by about 0.5k.
config FEATURE_TAB_COMPLETION
bool "Tab completion"
@@ -147,237 +147,237 @@ config FEATURE_EDITING_FANCY_PROMPT
default y
depends on FEATURE_EDITING
help
- Setting this option allows for prompts to use things like \w and
- \$ and escape codes.
+ Setting this option allows for prompts to use things like \w and
+ \$ and escape codes.
config FEATURE_EDITING_ASK_TERMINAL
bool "Query cursor position from terminal"
default n
depends on FEATURE_EDITING
help
- Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
- current cursor position. This information is used to make line
- editing more robust in some cases.
- If you are not sure whether your terminals respond to this code
- correctly, or want to save on code size (about 400 bytes),
- then do not turn this option on.
+ Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
+ current cursor position. This information is used to make line
+ editing more robust in some cases.
+ If you are not sure whether your terminals respond to this code
+ correctly, or want to save on code size (about 400 bytes),
+ then do not turn this option on.
config LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default n
help
- Enable this if your system has locale support and you would like
- busybox to support locale settings.
+ Enable this if your system has locale support and you would like
+ busybox to support locale settings.
config UNICODE_SUPPORT
bool "Support Unicode"
default y
help
- This makes various applets aware that one byte is not
- one character on screen.
+ This makes various applets aware that one byte is not
+ one character on screen.
- Busybox aims to eventually work correctly with Unicode displays.
- Any older encodings are not guaranteed to work.
- Probably by the time when busybox will be fully Unicode-clean,
- other encodings will be mainly of historic interest.
+ Busybox aims to eventually work correctly with Unicode displays.
+ Any older encodings are not guaranteed to work.
+ Probably by the time when busybox will be fully Unicode-clean,
+ other encodings will be mainly of historic interest.
config UNICODE_USING_LOCALE
bool "Use libc routines for Unicode (else uses internal ones)"
default n
depends on UNICODE_SUPPORT && LOCALE_SUPPORT
help
- With this option on, Unicode support is implemented using libc
- routines. Otherwise, internal implementation is used.
- Internal implementation is smaller.
+ With this option on, Unicode support is implemented using libc
+ routines. Otherwise, internal implementation is used.
+ Internal implementation is smaller.
config FEATURE_CHECK_UNICODE_IN_ENV
bool "Check $LC_ALL, $LC_CTYPE and $LANG environment variables"
default n
depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
help
- With this option on, Unicode support is activated
- only if locale-related variables have the value of the form
- "xxxx.utf8"
+ With this option on, Unicode support is activated
+ only if locale-related variables have the value of the form
+ "xxxx.utf8"
- Otherwise, Unicode support will be always enabled and active.
+ Otherwise, Unicode support will be always enabled and active.
config SUBST_WCHAR
int "Character code to substitute unprintable characters with"
depends on UNICODE_SUPPORT
default 63
help
- Typical values are 63 for '?' (works with any output device),
- 30 for ASCII substitute control code,
- 65533 (0xfffd) for Unicode replacement character.
+ Typical values are 63 for '?' (works with any output device),
+ 30 for ASCII substitute control code,
+ 65533 (0xfffd) for Unicode replacement character.
config LAST_SUPPORTED_WCHAR
int "Range of supported Unicode characters"
depends on UNICODE_SUPPORT
default 767
help
- Any character with Unicode value bigger than this is assumed
- to be non-printable on output device. Many applets replace
- such characters with substitution character.
-
- The idea is that many valid printable Unicode chars
- nevertheless are not displayed correctly. Think about
- combining charachers, double-wide hieroglyphs, obscure
- characters in dozens of ancient scripts...
- Many terminals, terminal emulators, xterms etc will fail
- to handle them correctly. Choose the smallest value
- which suits your needs.
-
- Typical values are:
- 126 - ASCII only
- 767 (0x2ff) - there are no combining chars in [0..767] range
+ Any character with Unicode value bigger than this is assumed
+ to be non-printable on output device. Many applets replace
+ such characters with substitution character.
+
+ The idea is that many valid printable Unicode chars
+ nevertheless are not displayed correctly. Think about
+ combining charachers, double-wide hieroglyphs, obscure
+ characters in dozens of ancient scripts...
+ Many terminals, terminal emulators, xterms etc will fail
+ to handle them correctly. Choose the smallest value
+ which suits your needs.
+
+ Typical values are:
+ 126 - ASCII only
+ 767 (0x2ff) - there are no combining chars in [0..767] range
(the range includes Latin 1, Latin Ext. A and B),
code is ~700 bytes smaller for this case.
- 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
+ 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
code is ~300 bytes smaller for this case.
- 12799 (0x31ff) - nearly all non-ideographic characters are
+ 12799 (0x31ff) - nearly all non-ideographic characters are
available in [0..12799] range, including
East Asian scripts like katakana, hiragana, hangul,
bopomofo...
- 0 - off, any valid printable Unicode character will be printed.
+ 0 - off, any valid printable Unicode character will be printed.
config UNICODE_COMBINING_WCHARS
bool "Allow zero-width Unicode characters on output"
default n
depends on UNICODE_SUPPORT
help
- With this option off, any Unicode char with width of 0
- is substituted on output.
+ With this option off, any Unicode char with width of 0
+ is substituted on output.
config UNICODE_WIDE_WCHARS
bool "Allow wide Unicode characters on output"
default n
depends on UNICODE_SUPPORT
help
- With this option off, any Unicode char with width > 1
- is substituted on output.
+ With this option off, any Unicode char with width > 1
+ is substituted on output.
config UNICODE_BIDI_SUPPORT
bool "Bidirectional character-aware line input"
default n
depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
help
- With this option on, right-to-left Unicode characters
- are treated differently on input (e.g. cursor movement).
+ With this option on, right-to-left Unicode characters
+ are treated differently on input (e.g. cursor movement).
config UNICODE_NEUTRAL_TABLE
bool "In bidi input, support non-ASCII neutral chars too"
default n
depends on UNICODE_BIDI_SUPPORT
help
- In most cases it's enough to treat only ASCII non-letters
- (i.e. punctuation, numbers and space) as characters
- with neutral directionality.
- With this option on, more extensive (and bigger) table
- of neutral chars will be used.
+ In most cases it's enough to treat only ASCII non-letters
+ (i.e. punctuation, numbers and space) as characters
+ with neutral directionality.
+ With this option on, more extensive (and bigger) table
+ of neutral chars will be used.
config UNICODE_PRESERVE_BROKEN
bool "Make it possible to enter sequences of chars which are not Unicode"
default n
depends on UNICODE_SUPPORT
help
- With this option on, on line-editing input (such as used by shells)
- invalid UTF-8 bytes are not substituted with the selected
- substitution character.
- For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
- at shell prompt will list file named 0xff (single char name
- with char value 255), not file named '?'.
+ With this option on, on line-editing input (such as used by shells)
+ invalid UTF-8 bytes are not substituted with the selected
+ substitution character.
+ For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
+ at shell prompt will list file named 0xff (single char name
+ with char value 255), not file named '?'.
config FEATURE_NON_POSIX_CP
bool "Non-POSIX, but safer, copying to special nodes"
default y
help
- With this option, "cp file symlink" will delete symlink
- and create a regular file. This does not conform to POSIX,
- but prevents a symlink attack.
- Similarly, "cp file device" will not send file's data
- to the device. (To do that, use "cat file >device")
+ With this option, "cp file symlink" will delete symlink
+ and create a regular file. This does not conform to POSIX,
+ but prevents a symlink attack.
+ Similarly, "cp file device" will not send file's data
+ to the device. (To do that, use "cat file >device")
config FEATURE_VERBOSE_CP_MESSAGE
bool "Give more precise messages when copy fails (cp, mv etc)"
default n
help
- Error messages with this feature enabled:
+ Error messages with this feature enabled:
- $ cp file /does_not_exist/file
- cp: cannot create '/does_not_exist/file': Path does not exist
- $ cp file /vmlinuz/file
- cp: cannot stat '/vmlinuz/file': Path has non-directory component
+ $ cp file /does_not_exist/file
+ cp: cannot create '/does_not_exist/file': Path does not exist
+ $ cp file /vmlinuz/file
+ cp: cannot stat '/vmlinuz/file': Path has non-directory component
- If this feature is not enabled, they will be, respectively:
+ If this feature is not enabled, they will be, respectively:
- cp: cannot create '/does_not_exist/file': No such file or directory
- cp: cannot stat '/vmlinuz/file': Not a directory
+ cp: cannot create '/does_not_exist/file': No such file or directory
+ cp: cannot stat '/vmlinuz/file': Not a directory
- This will cost you ~60 bytes.
+ This will cost you ~60 bytes.
config FEATURE_USE_SENDFILE
bool "Use sendfile system call"
default y
select PLATFORM_LINUX
help
- When enabled, busybox will use the kernel sendfile() function
- instead of read/write loops to copy data between file descriptors
- (for example, cp command does this a lot).
- If sendfile() doesn't work, copying code falls back to read/write
- loop. sendfile() was originally implemented for faster I/O
- from files to sockets, but since Linux 2.6.33 it was extended
- to work for many more file types.
+ When enabled, busybox will use the kernel sendfile() function
+ instead of read/write loops to copy data between file descriptors
+ (for example, cp command does this a lot).
+ If sendfile() doesn't work, copying code falls back to read/write
+ loop. sendfile() was originally implemented for faster I/O
+ from files to sockets, but since Linux 2.6.33 it was extended
+ to work for many more file types.
config FEATURE_COPYBUF_KB
int "Copy buffer size, in kilobytes"
range 1 1024
default 4
help
- Size of buffer used by cp, mv, install, wget etc.
- Buffers which are 4 kb or less will be allocated on stack.
- Bigger buffers will be allocated with mmap, with fallback to 4 kb
- stack buffer if mmap fails.
+ Size of buffer used by cp, mv, install, wget etc.
+ Buffers which are 4 kb or less will be allocated on stack.
+ Bigger buffers will be allocated with mmap, with fallback to 4 kb
+ stack buffer if mmap fails.
config FEATURE_SKIP_ROOTFS
bool "Skip rootfs in mount table"
default y
help
- Ignore rootfs entry in mount table.
+ Ignore rootfs entry in mount table.
- In Linux, kernel has a special filesystem, rootfs, which is initially
- mounted on /. It contains initramfs data, if kernel is configured
- to have one. Usually, another file system is mounted over / early
- in boot process, and therefore most tools which manipulate
- mount table, such as df, will skip rootfs entry.
+ In Linux, kernel has a special filesystem, rootfs, which is initially
+ mounted on /. It contains initramfs data, if kernel is configured
+ to have one. Usually, another file system is mounted over / early
+ in boot process, and therefore most tools which manipulate
+ mount table, such as df, will skip rootfs entry.
- However, some systems do not mount anything on /.
- If you need to configure busybox for one of these systems,
- you may find it useful to turn this option off to make df show
- initramfs statistics.
+ However, some systems do not mount anything on /.
+ If you need to configure busybox for one of these systems,
+ you may find it useful to turn this option off to make df show
+ initramfs statistics.
- Otherwise, choose Y.
+ Otherwise, choose Y.
config MONOTONIC_SYSCALL
bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
default y
select PLATFORM_LINUX
help
- Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
- time intervals (time, ping, traceroute etc need this).
- Probably requires Linux 2.6+. If not selected, gettimeofday
- will be used instead (which gives wrong results if date/time
- is reset).
+ Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
+ time intervals (time, ping, traceroute etc need this).
+ Probably requires Linux 2.6+. If not selected, gettimeofday
+ will be used instead (which gives wrong results if date/time
+ is reset).
config IOCTL_HEX2STR_ERROR
bool "Use ioctl names rather than hex values in error messages"
default y
help
- Use ioctl names rather than hex values in error messages
- (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
- saves about 1400 bytes.
+ Use ioctl names rather than hex values in error messages
+ (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
+ saves about 1400 bytes.
config FEATURE_HWIB
bool "Support infiniband HW"
default y
help
- Support for printing infiniband addresses in network applets.
+ Support for printing infiniband addresses in network applets.
diff --git a/libbb/common_bufsiz.c b/libbb/common_bufsiz.c
index f1124ba0e..6bc6d7bc9 100644
--- a/libbb/common_bufsiz.c
+++ b/libbb/common_bufsiz.c
@@ -10,35 +10,35 @@
//config: bool "Use the end of BSS page"
//config: default n
//config: help
-//config: Attempt to reclaim a small unused part of BSS.
+//config: Attempt to reclaim a small unused part of BSS.
//config:
-//config: Executables have the following parts:
-//config: = read-only executable code and constants, also known as "text"
-//config: = read-write data
-//config: = non-initialized (zeroed on demand) data, also known as "bss"
+//config: Executables have the following parts:
+//config: = read-only executable code and constants, also known as "text"
+//config: = read-write data
+//config: = non-initialized (zeroed on demand) data, also known as "bss"
//config:
-//config: At link time, "text" is padded to a full page. At runtime, all "text"
-//config: pages are mapped RO and executable.
+//config: At link time, "text" is padded to a full page. At runtime, all "text"
+//config: pages are mapped RO and executable.
//config:
-//config: "Data" starts on the next page boundary, but is not padded
-//config: to a full page at the end. "Bss" starts wherever "data" ends.
-//config: At runtime, "data" pages are mapped RW and they are file-backed
-//config: (this includes a small portion of "bss" which may live in the last
-//config: partial page of "data").
-//config: Pages which are fully in "bss" are mapped to anonymous memory.
+//config: "Data" starts on the next page boundary, but is not padded
+//config: to a full page at the end. "Bss" starts wherever "data" ends.
+//config: At runtime, "data" pages are mapped RW and they are file-backed
+//config: (this includes a small portion of "bss" which may live in the last
+//config: partial page of "data").
+//config: Pages which are fully in "bss" are mapped to anonymous memory.
//config:
-//config: "Bss" end is usually not page-aligned. There is an unused space
-//config: in the last page. Linker marks its start with the "_end" symbol.
+//config: "Bss" end is usually not page-aligned. There is an unused space
+//config: in the last page. Linker marks its start with the "_end" symbol.
//config:
-//config: This option will attempt to use that space for bb_common_bufsiz1[]
-//config: array. If it fits after _end, it will be used, and COMMON_BUFSIZE
-//config: will be enlarged from its guaranteed minimum size of 1 kbyte.
-//config: This may require recompilation a second time, since value of _end
-//config: is known only after final link.
+//config: This option will attempt to use that space for bb_common_bufsiz1[]
+//config: array. If it fits after _end, it will be used, and COMMON_BUFSIZE
+//config: will be enlarged from its guaranteed minimum size of 1 kbyte.
+//config: This may require recompilation a second time, since value of _end
+//config: is known only after final link.
//config:
-//config: If you are getting a build error like this:
-//config: appletlib.c:(.text.main+0xd): undefined reference to '_end'
-//config: disable this option.
+//config: If you are getting a build error like this:
+//config: appletlib.c:(.text.main+0xd): undefined reference to '_end'
+//config: disable this option.
//kbuild:lib-y += common_bufsiz.o
diff --git a/libbb/parse_config.c b/libbb/parse_config.c
index 408439766..307ae2cd2 100644
--- a/libbb/parse_config.c
+++ b/libbb/parse_config.c
@@ -13,7 +13,7 @@
////config: bool "Uniform config file parser debugging applet: parse"
////config: default n
////config: help
-////config: Typical usage of parse API:
+////config: Typical usage of parse API:
////config: char *t[3];
////config: parser_t *p = config_open(filename);
////config: while (config_read(p, t, 3, 0, delimiters, flags)) { // 1..3 tokens
diff --git a/libbb/u_signal_names.c b/libbb/u_signal_names.c
index b49714f2a..bf984a44e 100644
--- a/libbb/u_signal_names.c
+++ b/libbb/u_signal_names.c
@@ -11,8 +11,8 @@
//config: bool "Support RTMIN[+n] and RTMAX[-n] signal names"
//config: default y
//config: help
-//config: Support RTMIN[+n] and RTMAX[-n] signal names
-//config: in kill, killall etc. This costs ~250 bytes.
+//config: Support RTMIN[+n] and RTMAX[-n] signal names
+//config: in kill, killall etc. This costs ~250 bytes.
#include "libbb.h"
diff --git a/loginutils/Config.src b/loginutils/Config.src
index beb4eb855..680f42118 100644
--- a/loginutils/Config.src
+++ b/loginutils/Config.src
@@ -9,87 +9,87 @@ config FEATURE_SHADOWPASSWDS
bool "Support shadow passwords"
default y
help
- Build support for shadow password in /etc/shadow. This file is only
- readable by root and thus the encrypted passwords are no longer
- publicly readable.
+ Build support for shadow password in /etc/shadow. This file is only
+ readable by root and thus the encrypted passwords are no longer
+ publicly readable.
config USE_BB_PWD_GRP
bool "Use internal password and group functions rather than system functions"
default y
help
- If you leave this disabled, busybox will use the system's password
- and group functions. And if you are using the GNU C library
- (glibc), you will then need to install the /etc/nsswitch.conf
- configuration file and the required /lib/libnss_* libraries in
- order for the password and group functions to work. This generally
- makes your embedded system quite a bit larger.
+ If you leave this disabled, busybox will use the system's password
+ and group functions. And if you are using the GNU C library
+ (glibc), you will then need to install the /etc/nsswitch.conf
+ configuration file and the required /lib/libnss_* libraries in
+ order for the password and group functions to work. This generally
+ makes your embedded system quite a bit larger.
- Enabling this option will cause busybox to directly access the
- system's /etc/password, /etc/group files (and your system will be
- smaller, and I will get fewer emails asking about how glibc NSS
- works). When this option is enabled, you will not be able to use
- PAM to access remote LDAP password servers and whatnot. And if you
- want hostname resolution to work with glibc, you still need the
- /lib/libnss_* libraries.
+ Enabling this option will cause busybox to directly access the
+ system's /etc/password, /etc/group files (and your system will be
+ smaller, and I will get fewer emails asking about how glibc NSS
+ works). When this option is enabled, you will not be able to use
+ PAM to access remote LDAP password servers and whatnot. And if you
+ want hostname resolution to work with glibc, you still need the
+ /lib/libnss_* libraries.
- If you need to use glibc's nsswitch.conf mechanism
- (e.g. if user/group database is NOT stored in /etc/passwd etc),
- you must NOT use this option.
+ If you need to use glibc's nsswitch.conf mechanism
+ (e.g. if user/group database is NOT stored in /etc/passwd etc),
+ you must NOT use this option.
- If you enable this option, it will add about 1.5k.
+ If you enable this option, it will add about 1.5k.
config USE_BB_SHADOW
bool "Use internal shadow password functions"
default y
depends on USE_BB_PWD_GRP && FEATURE_SHADOWPASSWDS
help
- If you leave this disabled, busybox will use the system's shadow
- password handling functions. And if you are using the GNU C library
- (glibc), you will then need to install the /etc/nsswitch.conf
- configuration file and the required /lib/libnss_* libraries in
- order for the shadow password functions to work. This generally
- makes your embedded system quite a bit larger.
+ If you leave this disabled, busybox will use the system's shadow
+ password handling functions. And if you are using the GNU C library
+ (glibc), you will then need to install the /etc/nsswitch.conf
+ configuration file and the required /lib/libnss_* libraries in
+ order for the shadow password functions to work. This generally
+ makes your embedded system quite a bit larger.
- Enabling this option will cause busybox to directly access the
- system's /etc/shadow file when handling shadow passwords. This
- makes your system smaller (and I will get fewer emails asking about
- how glibc NSS works). When this option is enabled, you will not be
- able to use PAM to access shadow passwords from remote LDAP
- password servers and whatnot.
+ Enabling this option will cause busybox to directly access the
+ system's /etc/shadow file when handling shadow passwords. This
+ makes your system smaller (and I will get fewer emails asking about
+ how glibc NSS works). When this option is enabled, you will not be
+ able to use PAM to access shadow passwords from remote LDAP
+ password servers and whatnot.
config USE_BB_CRYPT
bool "Use internal crypt functions"
default y
help
- Busybox has internal DES and MD5 crypt functions.
- They produce results which are identical to corresponding
- standard C library functions.
+ Busybox has internal DES and MD5 crypt functions.
+ They produce results which are identical to corresponding
+ standard C library functions.
- If you leave this disabled, busybox will use the system's
- crypt functions. Most C libraries use large (~70k)
- static buffers there, and also combine them with more general
- DES encryption/decryption.
+ If you leave this disabled, busybox will use the system's
+ crypt functions. Most C libraries use large (~70k)
+ static buffers there, and also combine them with more general
+ DES encryption/decryption.
- For busybox, having large static buffers is undesirable,
- especially on NOMMU machines. Busybox also doesn't need
- DES encryption/decryption and can do with smaller code.
+ For busybox, having large static buffers is undesirable,
+ especially on NOMMU machines. Busybox also doesn't need
+ DES encryption/decryption and can do with smaller code.
- If you enable this option, it will add about 4.8k of code
- if you are building dynamically linked executable.
- In static build, it makes code _smaller_ by about 1.2k,
- and likely many kilobytes less of bss.
+ If you enable this option, it will add about 4.8k of code
+ if you are building dynamically linked executable.
+ In static build, it makes code _smaller_ by about 1.2k,
+ and likely many kilobytes less of bss.
config USE_BB_CRYPT_SHA
bool "Enable SHA256/512 crypt functions"
default y
depends on USE_BB_CRYPT
help
- Enable this if you have passwords starting with "$5$" or "$6$"
- in your /etc/passwd or /etc/shadow files. These passwords
- are hashed using SHA256 and SHA512 algorithms. Support for them
- was added to glibc in 2008.
- With this option off, login will fail password check for any
- user which has password encrypted with these algorithms.
+ Enable this if you have passwords starting with "$5$" or "$6$"
+ in your /etc/passwd or /etc/shadow files. These passwords
+ are hashed using SHA256 and SHA512 algorithms. Support for them
+ was added to glibc in 2008.
+ With this option off, login will fail password check for any
+ user which has password encrypted with these algorithms.
INSERT
diff --git a/loginutils/add-remove-shell.c b/loginutils/add-remove-shell.c
index eb16c6ead..750b44bd6 100644
--- a/loginutils/add-remove-shell.c
+++ b/loginutils/add-remove-shell.c
@@ -8,16 +8,16 @@
* for details.
*/
//config:config ADD_SHELL
-//config: bool "add-shell (2.8 kb)"
-//config: default y if DESKTOP
-//config: help
-//config: Add shells to /etc/shells.
+//config: bool "add-shell (2.8 kb)"
+//config: default y if DESKTOP
+//config: help
+//config: Add shells to /etc/shells.
//config:
//config:config REMOVE_SHELL
-//config: bool "remove-shell (2.7 kb)"
-//config: default y if DESKTOP
-//config: help
-//config: Remove shells from /etc/shells.
+//config: bool "remove-shell (2.7 kb)"
+//config: default y if DESKTOP
+//config: help
+//config: Remove shells from /etc/shells.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_ADD_SHELL( APPLET_ODDNAME(add-shell , add_remove_shell, BB_DIR_USR_SBIN, BB_SUID_DROP, add_shell ))
diff --git a/loginutils/addgroup.c b/loginutils/addgroup.c
index c02ff10e9..b197fc149 100644
--- a/loginutils/addgroup.c
+++ b/loginutils/addgroup.c
@@ -13,7 +13,7 @@
//config: bool "addgroup (8.2 kb)"
//config: default y
//config: help
-//config: Utility for creating a new group account.
+//config: Utility for creating a new group account.
//config:
//config:config FEATURE_ADDGROUP_LONG_OPTIONS
//config: bool "Enable long options"
@@ -25,9 +25,9 @@
//config: default y
//config: depends on ADDGROUP
//config: help
-//config: If called with two non-option arguments,
-//config: addgroup will add an existing user to an
-//config: existing group.
+//config: If called with two non-option arguments,
+//config: addgroup will add an existing user to an
+//config: existing group.
//applet:IF_ADDGROUP(APPLET(addgroup, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/loginutils/adduser.c b/loginutils/adduser.c
index e2818f852..ef18278ac 100644
--- a/loginutils/adduser.c
+++ b/loginutils/adduser.c
@@ -11,7 +11,7 @@
//config: bool "adduser (15 kb)"
//config: default y
//config: help
-//config: Utility for creating a new user account.
+//config: Utility for creating a new user account.
//config:
//config:config FEATURE_ADDUSER_LONG_OPTIONS
//config: bool "Enable long options"
@@ -23,19 +23,19 @@
//config: default n
//config: depends on ADDUSER || ADDGROUP
//config: help
-//config: Enable sanity check on user and group names in adduser and addgroup.
-//config: To avoid problems, the user or group name should consist only of
-//config: letters, digits, underscores, periods, at signs and dashes,
-//config: and not start with a dash (as defined by IEEE Std 1003.1-2001).
-//config: For compatibility with Samba machine accounts "$" is also supported
-//config: at the end of the user or group name.
+//config: Enable sanity check on user and group names in adduser and addgroup.
+//config: To avoid problems, the user or group name should consist only of
+//config: letters, digits, underscores, periods, at signs and dashes,
+//config: and not start with a dash (as defined by IEEE Std 1003.1-2001).
+//config: For compatibility with Samba machine accounts "$" is also supported
+//config: at the end of the user or group name.
//config:
//config:config LAST_ID
//config: int "Last valid uid or gid for adduser and addgroup"
//config: depends on ADDUSER || ADDGROUP
//config: default 60000
//config: help
-//config: Last valid uid or gid for adduser and addgroup
+//config: Last valid uid or gid for adduser and addgroup
//config:
//config:config FIRST_SYSTEM_ID
//config: int "First valid system uid or gid for adduser and addgroup"
@@ -43,7 +43,7 @@
//config: range 0 LAST_ID
//config: default 100
//config: help
-//config: First valid system uid or gid for adduser and addgroup
+//config: First valid system uid or gid for adduser and addgroup
//config:
//config:config LAST_SYSTEM_ID
//config: int "Last valid system uid or gid for adduser and addgroup"
@@ -51,7 +51,7 @@
//config: range FIRST_SYSTEM_ID LAST_ID
//config: default 999
//config: help
-//config: Last valid system uid or gid for adduser and addgroup
+//config: Last valid system uid or gid for adduser and addgroup
//applet:IF_ADDUSER(APPLET(adduser, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/loginutils/chpasswd.c b/loginutils/chpasswd.c
index 60f54ab01..e390da647 100644
--- a/loginutils/chpasswd.c
+++ b/loginutils/chpasswd.c
@@ -9,15 +9,15 @@
//config: bool "chpasswd (18 kb)"
//config: default y
//config: help
-//config: Reads a file of user name and password pairs from standard input
-//config: and uses this information to update a group of existing users.
+//config: Reads a file of user name and password pairs from standard input
+//config: and uses this information to update a group of existing users.
//config:
//config:config FEATURE_DEFAULT_PASSWD_ALGO
//config: string "Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG)"
//config: default "des"
//config: depends on PASSWD || CRYPTPW || CHPASSWD
//config: help
-//config: Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
+//config: Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
//applet:IF_CHPASSWD(APPLET(chpasswd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/loginutils/cryptpw.c b/loginutils/cryptpw.c
index 75769c813..f8906c59a 100644
--- a/loginutils/cryptpw.c
+++ b/loginutils/cryptpw.c
@@ -13,16 +13,16 @@
//config: bool "cryptpw (14 kb)"
//config: default y
//config: help
-//config: Encrypts the given password with the crypt(3) libc function
-//config: using the given salt.
+//config: Encrypts the given password with the crypt(3) libc function
+//config: using the given salt.
//config:
//config:config MKPASSWD
//config: bool "mkpasswd (15 kb)"
//config: default y
//config: help
-//config: Encrypts the given password with the crypt(3) libc function
-//config: using the given salt. Debian has this utility under mkpasswd
-//config: name. Busybox provides mkpasswd as an alias for cryptpw.
+//config: Encrypts the given password with the crypt(3) libc function
+//config: using the given salt. Debian has this utility under mkpasswd
+//config: name. Busybox provides mkpasswd as an alias for cryptpw.
//applet:IF_CRYPTPW(APPLET(cryptpw, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/loginutils/deluser.c b/loginutils/deluser.c
index 5b05faf3a..3b6bd952d 100644
--- a/loginutils/deluser.c
+++ b/loginutils/deluser.c
@@ -12,21 +12,21 @@
//config: bool "deluser (8.4 kb)"
//config: default y
//config: help
-//config: Utility for deleting a user account.
+//config: Utility for deleting a user account.
//config:
//config:config DELGROUP
//config: bool "delgroup (5.6 kb)"
//config: default y
//config: help
-//config: Utility for deleting a group account.
+//config: Utility for deleting a group account.
//config:
//config:config FEATURE_DEL_USER_FROM_GROUP
//config: bool "Support removing users from groups"
//config: default y
//config: depends on DELGROUP
//config: help
-//config: If called with two non-option arguments, deluser
-//config: or delgroup will remove an user from a specified group.
+//config: If called with two non-option arguments, deluser
+//config: or delgroup will remove an user from a specified group.
//applet:IF_DELUSER(APPLET(deluser, BB_DIR_USR_SBIN, BB_SUID_DROP))
//applet:IF_DELGROUP(APPLET_ODDNAME(delgroup, deluser, BB_DIR_USR_SBIN, BB_SUID_DROP, delgroup))
diff --git a/loginutils/getty.c b/loginutils/getty.c
index d38471a42..fd5116d08 100644
--- a/loginutils/getty.c
+++ b/loginutils/getty.c
@@ -26,19 +26,19 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: getty lets you log in on a tty. It is normally invoked by init.
+//config: getty lets you log in on a tty. It is normally invoked by init.
//config:
-//config: Note that you can save a few bytes by disabling it and
-//config: using login applet directly.
-//config: If you need to reset tty attributes before calling login,
-//config: this script approximates getty:
+//config: Note that you can save a few bytes by disabling it and
+//config: using login applet directly.
+//config: If you need to reset tty attributes before calling login,
+//config: this script approximates getty:
//config:
-//config: exec </dev/$1 >/dev/$1 2>&1 || exit 1
-//config: reset
-//config: stty sane; stty ispeed 38400; stty ospeed 38400
-//config: printf "%s login: " "`hostname`"
-//config: read -r login
-//config: exec /bin/login "$login"
+//config: exec </dev/$1 >/dev/$1 2>&1 || exit 1
+//config: reset
+//config: stty sane; stty ispeed 38400; stty ospeed 38400
+//config: printf "%s login: " "`hostname`"
+//config: read -r login
+//config: exec /bin/login "$login"
//applet:IF_GETTY(APPLET(getty, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/loginutils/login.c b/loginutils/login.c
index fbdfd2925..39f703f07 100644
--- a/loginutils/login.c
+++ b/loginutils/login.c
@@ -7,46 +7,46 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: login is used when signing onto a system.
+//config: login is used when signing onto a system.
//config:
-//config: Note that Busybox binary must be setuid root for this applet to
-//config: work properly.
+//config: Note that Busybox binary must be setuid root for this applet to
+//config: work properly.
//config:
//config:config LOGIN_SESSION_AS_CHILD
//config: bool "Run logged in session in a child process"
//config: default y if PAM
//config: depends on LOGIN
//config: help
-//config: Run the logged in session in a child process. This allows
-//config: login to clean up things such as utmp entries or PAM sessions
-//config: when the login session is complete. If you use PAM, you
-//config: almost always would want this to be set to Y, else PAM session
-//config: will not be cleaned up.
+//config: Run the logged in session in a child process. This allows
+//config: login to clean up things such as utmp entries or PAM sessions
+//config: when the login session is complete. If you use PAM, you
+//config: almost always would want this to be set to Y, else PAM session
+//config: will not be cleaned up.
//config:
//config:config LOGIN_SCRIPTS
//config: bool "Support login scripts"
//config: depends on LOGIN
//config: default y
//config: help
-//config: Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
-//config: just prior to switching from root to logged-in user.
+//config: Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
+//config: just prior to switching from root to logged-in user.
//config:
//config:config FEATURE_NOLOGIN
//config: bool "Support /etc/nologin"
//config: default y
//config: depends on LOGIN
//config: help
-//config: The file /etc/nologin is used by (some versions of) login(1).
-//config: If it exists, non-root logins are prohibited.
+//config: The file /etc/nologin is used by (some versions of) login(1).
+//config: If it exists, non-root logins are prohibited.
//config:
//config:config FEATURE_SECURETTY
//config: bool "Support /etc/securetty"
//config: default y
//config: depends on LOGIN
//config: help
-//config: The file /etc/securetty is used by (some versions of) login(1).
-//config: The file contains the device names of tty lines (one per line,
-//config: without leading /dev/) on which root is allowed to login.
+//config: The file /etc/securetty is used by (some versions of) login(1).
+//config: The file contains the device names of tty lines (one per line,
+//config: without leading /dev/) on which root is allowed to login.
//applet:/* Needs to be run by root or be suid root - needs to change uid and gid: */
//applet:IF_LOGIN(APPLET(login, BB_DIR_BIN, BB_SUID_REQUIRE))
diff --git a/loginutils/passwd.c b/loginutils/passwd.c
index ea8f07474..03f8ad0a4 100644
--- a/loginutils/passwd.c
+++ b/loginutils/passwd.c
@@ -7,20 +7,20 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: passwd changes passwords for user and group accounts. A normal user
-//config: may only change the password for his/her own account, the super user
-//config: may change the password for any account. The administrator of a group
-//config: may change the password for the group.
+//config: passwd changes passwords for user and group accounts. A normal user
+//config: may only change the password for his/her own account, the super user
+//config: may change the password for any account. The administrator of a group
+//config: may change the password for the group.
//config:
-//config: Note that Busybox binary must be setuid root for this applet to
-//config: work properly.
+//config: Note that Busybox binary must be setuid root for this applet to
+//config: work properly.
//config:
//config:config FEATURE_PASSWD_WEAK_CHECK
//config: bool "Check new passwords for weakness"
//config: default y
//config: depends on PASSWD
//config: help
-//config: With this option passwd will refuse new passwords which are "weak".
+//config: With this option passwd will refuse new passwords which are "weak".
//applet:/* Needs to be run by root or be suid root - needs to change /etc/{passwd,shadow}: */
//applet:IF_PASSWD(APPLET(passwd, BB_DIR_USR_BIN, BB_SUID_REQUIRE))
diff --git a/loginutils/su.c b/loginutils/su.c
index b70696fe7..41291ea8f 100644
--- a/loginutils/su.c
+++ b/loginutils/su.c
@@ -9,10 +9,10 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: su is used to become another user during a login session.
-//config: Invoked without a username, su defaults to becoming the super user.
-//config: Note that busybox binary must be setuid root for this applet to
-//config: work properly.
+//config: su is used to become another user during a login session.
+//config: Invoked without a username, su defaults to becoming the super user.
+//config: Note that busybox binary must be setuid root for this applet to
+//config: work properly.
//config:
//config:config FEATURE_SU_SYSLOG
//config: bool "Log to syslog all attempts to use su"
diff --git a/loginutils/sulogin.c b/loginutils/sulogin.c
index cdc2c8c5a..d5a463cac 100644
--- a/loginutils/sulogin.c
+++ b/loginutils/sulogin.c
@@ -9,8 +9,8 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: sulogin is invoked when the system goes into single user
-//config: mode (this is done through an entry in inittab).
+//config: sulogin is invoked when the system goes into single user
+//config: mode (this is done through an entry in inittab).
//applet:IF_SULOGIN(APPLET(sulogin, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/loginutils/vlock.c b/loginutils/vlock.c
index e3b701d53..f22abd3aa 100644
--- a/loginutils/vlock.c
+++ b/loginutils/vlock.c
@@ -19,10 +19,10 @@
//config: bool "vlock (17 kb)"
//config: default y
//config: help
-//config: Build the "vlock" applet which allows you to lock (virtual) terminals.
+//config: Build the "vlock" applet which allows you to lock (virtual) terminals.
//config:
-//config: Note that Busybox binary must be setuid root for this applet to
-//config: work properly.
+//config: Note that Busybox binary must be setuid root for this applet to
+//config: work properly.
//applet:/* Needs to be run by root or be suid root - needs to change uid and gid: */
//applet:IF_VLOCK(APPLET(vlock, BB_DIR_USR_BIN, BB_SUID_REQUIRE))
diff --git a/mailutils/Config.src b/mailutils/Config.src
index e45a0f8fb..6d47163e4 100644
--- a/mailutils/Config.src
+++ b/mailutils/Config.src
@@ -7,6 +7,6 @@ config FEATURE_MIME_CHARSET
default "us-ascii"
depends on MAKEMIME || REFORMIME || SENDMAIL
help
- Default charset of the message.
+ Default charset of the message.
endmenu
diff --git a/mailutils/makemime.c b/mailutils/makemime.c
index 9c79133b6..577bcde39 100644
--- a/mailutils/makemime.c
+++ b/mailutils/makemime.c
@@ -10,7 +10,7 @@
//config: bool "makemime (5.9 kb)"
//config: default y
//config: help
-//config: Create MIME-formatted messages.
+//config: Create MIME-formatted messages.
//applet:IF_MAKEMIME(APPLET(makemime, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/mailutils/popmaildir.c b/mailutils/popmaildir.c
index ad9a04a89..1695a9bb8 100644
--- a/mailutils/popmaildir.c
+++ b/mailutils/popmaildir.c
@@ -13,18 +13,18 @@
//config: bool "popmaildir (10 kb)"
//config: default y
//config: help
-//config: Simple yet powerful POP3 mail popper. Delivers content
-//config: of remote mailboxes to local Maildir.
+//config: Simple yet powerful POP3 mail popper. Delivers content
+//config: of remote mailboxes to local Maildir.
//config:
//config:config FEATURE_POPMAILDIR_DELIVERY
//config: bool "Allow message filters and custom delivery program"
//config: default y
//config: depends on POPMAILDIR
//config: help
-//config: Allow to use a custom program to filter the content
-//config: of the message before actual delivery (-F "prog [args...]").
-//config: Allow to use a custom program for message actual delivery
-//config: (-M "prog [args...]").
+//config: Allow to use a custom program to filter the content
+//config: of the message before actual delivery (-F "prog [args...]").
+//config: Allow to use a custom program for message actual delivery
+//config: (-M "prog [args...]").
//applet:IF_POPMAILDIR(APPLET(popmaildir, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/mailutils/reformime.c b/mailutils/reformime.c
index 4f29f68e8..6a0254803 100644
--- a/mailutils/reformime.c
+++ b/mailutils/reformime.c
@@ -10,15 +10,15 @@
//config: bool "reformime (7.5 kb)"
//config: default y
//config: help
-//config: Parse MIME-formatted messages.
+//config: Parse MIME-formatted messages.
//config:
//config:config FEATURE_REFORMIME_COMPAT
//config: bool "Accept and ignore options other than -x and -X"
//config: default y
//config: depends on REFORMIME
//config: help
-//config: Accept (for compatibility only) and ignore options
-//config: other than -x and -X.
+//config: Accept (for compatibility only) and ignore options
+//config: other than -x and -X.
//applet:IF_REFORMIME(APPLET(reformime, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/mailutils/sendmail.c b/mailutils/sendmail.c
index c70d06263..346de2712 100644
--- a/mailutils/sendmail.c
+++ b/mailutils/sendmail.c
@@ -10,7 +10,7 @@
//config: bool "sendmail (14 kb)"
//config: default y
//config: help
-//config: Barebones sendmail.
+//config: Barebones sendmail.
//applet:IF_SENDMAIL(APPLET(sendmail, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/adjtimex.c b/miscutils/adjtimex.c
index c91527ffb..04ba5636f 100644
--- a/miscutils/adjtimex.c
+++ b/miscutils/adjtimex.c
@@ -15,8 +15,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Adjtimex reads and optionally sets adjustment parameters for
-//config: the Linux clock adjustment algorithm.
+//config: Adjtimex reads and optionally sets adjustment parameters for
+//config: the Linux clock adjustment algorithm.
//applet:IF_ADJTIMEX(APPLET(adjtimex, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/bbconfig.c b/miscutils/bbconfig.c
index faaacad18..045aca211 100644
--- a/miscutils/bbconfig.c
+++ b/miscutils/bbconfig.c
@@ -5,22 +5,22 @@
//config: bool "bbconfig (9.7 kb)"
//config: default n
//config: help
-//config: The bbconfig applet will print the config file with which
-//config: busybox was built.
+//config: The bbconfig applet will print the config file with which
+//config: busybox was built.
//config:
//config:config FEATURE_COMPRESS_BBCONFIG
//config: bool "Compress bbconfig data"
//config: default y
//config: depends on BBCONFIG
//config: help
-//config: Store bbconfig data in compressed form, uncompress them on-the-fly
-//config: before output.
+//config: Store bbconfig data in compressed form, uncompress them on-the-fly
+//config: before output.
//config:
-//config: If you have a really tiny busybox with few applets enabled (and
-//config: bunzip2 isn't one of them), the overhead of the decompressor might
-//config: be noticeable. Also, if you run executables directly from ROM
-//config: and have very little memory, this might not be a win. Otherwise,
-//config: you probably want this.
+//config: If you have a really tiny busybox with few applets enabled (and
+//config: bunzip2 isn't one of them), the overhead of the decompressor might
+//config: be noticeable. Also, if you run executables directly from ROM
+//config: and have very little memory, this might not be a win. Otherwise,
+//config: you probably want this.
//applet:IF_BBCONFIG(APPLET(bbconfig, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/miscutils/beep.c b/miscutils/beep.c
index 782656fc5..b9b62f79b 100644
--- a/miscutils/beep.c
+++ b/miscutils/beep.c
@@ -12,7 +12,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The beep applets beeps in a given freq/Hz.
+//config: The beep applets beeps in a given freq/Hz.
//config:
//config:config FEATURE_BEEP_FREQ
//config: int "default frequency"
@@ -20,7 +20,7 @@
//config: default 4000
//config: depends on BEEP
//config: help
-//config: Frequency for default beep.
+//config: Frequency for default beep.
//config:
//config:config FEATURE_BEEP_LENGTH_MS
//config: int "default length"
@@ -28,7 +28,7 @@
//config: default 30
//config: depends on BEEP
//config: help
-//config: Length in ms for default beep.
+//config: Length in ms for default beep.
//applet:IF_BEEP(APPLET(beep, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/chat.c b/miscutils/chat.c
index a1dc753bb..216a899a0 100644
--- a/miscutils/chat.c
+++ b/miscutils/chat.c
@@ -11,68 +11,68 @@
//config: bool "chat (6.6 kb)"
//config: default y
//config: help
-//config: Simple chat utility.
+//config: Simple chat utility.
//config:
//config:config FEATURE_CHAT_NOFAIL
//config: bool "Enable NOFAIL expect strings"
//config: depends on CHAT
//config: default y
//config: help
-//config: When enabled expect strings which are started with a dash trigger
-//config: no-fail mode. That is when expectation is not met within timeout
-//config: the script is not terminated but sends next SEND string and waits
-//config: for next EXPECT string. This allows to compose far more flexible
-//config: scripts.
+//config: When enabled expect strings which are started with a dash trigger
+//config: no-fail mode. That is when expectation is not met within timeout
+//config: the script is not terminated but sends next SEND string and waits
+//config: for next EXPECT string. This allows to compose far more flexible
+//config: scripts.
//config:
//config:config FEATURE_CHAT_TTY_HIFI
//config: bool "Force STDIN to be a TTY"
//config: depends on CHAT
//config: default n
//config: help
-//config: Original chat always treats STDIN as a TTY device and sets for it
-//config: so-called raw mode. This option turns on such behaviour.
+//config: Original chat always treats STDIN as a TTY device and sets for it
+//config: so-called raw mode. This option turns on such behaviour.
//config:
//config:config FEATURE_CHAT_IMPLICIT_CR
//config: bool "Enable implicit Carriage Return"
//config: depends on CHAT
//config: default y
//config: help
-//config: When enabled make chat to terminate all SEND strings with a "\r"
-//config: unless "\c" is met anywhere in the string.
+//config: When enabled make chat to terminate all SEND strings with a "\r"
+//config: unless "\c" is met anywhere in the string.
//config:
//config:config FEATURE_CHAT_SWALLOW_OPTS
//config: bool "Swallow options"
//config: depends on CHAT
//config: default y
//config: help
-//config: Busybox chat require no options. To make it not fail when used
-//config: in place of original chat (which has a bunch of options) turn
-//config: this on.
+//config: Busybox chat require no options. To make it not fail when used
+//config: in place of original chat (which has a bunch of options) turn
+//config: this on.
//config:
//config:config FEATURE_CHAT_SEND_ESCAPES
//config: bool "Support weird SEND escapes"
//config: depends on CHAT
//config: default y
//config: help
-//config: Original chat uses some escape sequences in SEND arguments which
-//config: are not sent to device but rather performs special actions.
-//config: E.g. "\K" means to send a break sequence to device.
-//config: "\d" delays execution for a second, "\p" -- for a 1/100 of second.
-//config: Before turning this option on think twice: do you really need them?
+//config: Original chat uses some escape sequences in SEND arguments which
+//config: are not sent to device but rather performs special actions.
+//config: E.g. "\K" means to send a break sequence to device.
+//config: "\d" delays execution for a second, "\p" -- for a 1/100 of second.
+//config: Before turning this option on think twice: do you really need them?
//config:
//config:config FEATURE_CHAT_VAR_ABORT_LEN
//config: bool "Support variable-length ABORT conditions"
//config: depends on CHAT
//config: default y
//config: help
-//config: Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
+//config: Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
//config:
//config:config FEATURE_CHAT_CLR_ABORT
//config: bool "Support revoking of ABORT conditions"
//config: depends on CHAT
//config: default y
//config: help
-//config: Support CLR_ABORT directive.
+//config: Support CLR_ABORT directive.
//applet:IF_CHAT(APPLET(chat, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/conspy.c b/miscutils/conspy.c
index 22a6918e1..47b9e7207 100644
--- a/miscutils/conspy.c
+++ b/miscutils/conspy.c
@@ -14,10 +14,10 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: A text-mode VNC like program for Linux virtual terminals.
-//config: example: conspy NUM shared access to console num
-//config: or conspy -nd NUM screenshot of console num
-//config: or conspy -cs NUM poor man's GNU screen like
+//config: A text-mode VNC like program for Linux virtual terminals.
+//config: example: conspy NUM shared access to console num
+//config: or conspy -nd NUM screenshot of console num
+//config: or conspy -cs NUM poor man's GNU screen like
//applet:IF_CONSPY(APPLET(conspy, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/miscutils/crond.c b/miscutils/crond.c
index 8d24f294c..6c54e1a8f 100644
--- a/miscutils/crond.c
+++ b/miscutils/crond.c
@@ -13,50 +13,50 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: Crond is a background daemon that parses individual crontab
-//config: files and executes commands on behalf of the users in question.
-//config: This is a port of dcron from slackware. It uses files of the
-//config: format /var/spool/cron/crontabs/<username> files, for example:
-//config: $ cat /var/spool/cron/crontabs/root
-//config: # Run daily cron jobs at 4:40 every day:
-//config: 40 4 * * * /etc/cron/daily > /dev/null 2>&1
+//config: Crond is a background daemon that parses individual crontab
+//config: files and executes commands on behalf of the users in question.
+//config: This is a port of dcron from slackware. It uses files of the
+//config: format /var/spool/cron/crontabs/<username> files, for example:
+//config: $ cat /var/spool/cron/crontabs/root
+//config: # Run daily cron jobs at 4:40 every day:
+//config: 40 4 * * * /etc/cron/daily > /dev/null 2>&1
//config:
//config:config FEATURE_CROND_D
//config: bool "Support option -d to redirect output to stderr"
//config: depends on CROND
//config: default y
//config: help
-//config: -d N sets loglevel (0:most verbose) and directs all output to stderr.
+//config: -d N sets loglevel (0:most verbose) and directs all output to stderr.
//config:
//config:config FEATURE_CROND_CALL_SENDMAIL
//config: bool "Report command output via email (using sendmail)"
//config: default y
//config: depends on CROND
//config: help
-//config: Command output will be sent to corresponding user via email.
+//config: Command output will be sent to corresponding user via email.
//config:
//config:config FEATURE_CROND_SPECIAL_TIMES
//config: bool "Support special times (@reboot, @daily, etc) in crontabs"
//config: default y
//config: depends on CROND
//config: help
-//config: string meaning
-//config: ------ -------
-//config: @reboot Run once, at startup
-//config: @yearly Run once a year: "0 0 1 1 *"
-//config: @annually Same as @yearly: "0 0 1 1 *"
-//config: @monthly Run once a month: "0 0 1 * *"
-//config: @weekly Run once a week: "0 0 * * 0"
-//config: @daily Run once a day: "0 0 * * *"
-//config: @midnight Same as @daily: "0 0 * * *"
-//config: @hourly Run once an hour: "0 * * * *"
+//config: string meaning
+//config: ------ -------
+//config: @reboot Run once, at startup
+//config: @yearly Run once a year: "0 0 1 1 *"
+//config: @annually Same as @yearly: "0 0 1 1 *"
+//config: @monthly Run once a month: "0 0 1 * *"
+//config: @weekly Run once a week: "0 0 * * 0"
+//config: @daily Run once a day: "0 0 * * *"
+//config: @midnight Same as @daily: "0 0 * * *"
+//config: @hourly Run once an hour: "0 * * * *"
//config:
//config:config FEATURE_CROND_DIR
//config: string "crond spool directory"
//config: default "/var/spool/cron"
//config: depends on CROND || CRONTAB
//config: help
-//config: Location of crond spool.
+//config: Location of crond spool.
//applet:IF_CROND(APPLET(crond, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/crontab.c b/miscutils/crontab.c
index 409307567..23cb54887 100644
--- a/miscutils/crontab.c
+++ b/miscutils/crontab.c
@@ -13,10 +13,10 @@
//config: bool "crontab (9.7 kb)"
//config: default y
//config: help
-//config: Crontab manipulates the crontab for a particular user. Only
-//config: the superuser may specify a different user and/or crontab directory.
-//config: Note that Busybox binary must be setuid root for this applet to
-//config: work properly.
+//config: Crontab manipulates the crontab for a particular user. Only
+//config: the superuser may specify a different user and/or crontab directory.
+//config: Note that Busybox binary must be setuid root for this applet to
+//config: work properly.
/* Needs to be run by root or be suid root - needs to change /var/spool/cron* files: */
//applet:IF_CRONTAB(APPLET(crontab, BB_DIR_USR_BIN, BB_SUID_REQUIRE))
diff --git a/miscutils/dc.c b/miscutils/dc.c
index d4cd49998..b922a7184 100644
--- a/miscutils/dc.c
+++ b/miscutils/dc.c
@@ -6,16 +6,16 @@
//config: bool "dc (4.2 kb)"
//config: default y
//config: help
-//config: Dc is a reverse-polish desk calculator which supports unlimited
-//config: precision arithmetic.
+//config: Dc is a reverse-polish desk calculator which supports unlimited
+//config: precision arithmetic.
//config:
//config:config FEATURE_DC_LIBM
//config: bool "Enable power and exp functions (requires libm)"
//config: default y
//config: depends on DC
//config: help
-//config: Enable power and exp functions.
-//config: NOTE: This will require libm to be present for linking.
+//config: Enable power and exp functions.
+//config: NOTE: This will require libm to be present for linking.
//applet:IF_DC(APPLET(dc, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/devfsd.c b/miscutils/devfsd.c
index 334f1071b..814714f53 100644
--- a/miscutils/devfsd.c
+++ b/miscutils/devfsd.c
@@ -59,56 +59,55 @@
//config: select PLATFORM_LINUX
//config: select FEATURE_SYSLOG
//config: help
-//config: This is deprecated and should NOT be used anymore.
-//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead!
-//config: See docs/mdev.txt for detailed instructions on how to use mdev
-//config: instead.
+//config: This is deprecated and should NOT be used anymore.
+//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+//config: See docs/mdev.txt for detailed instructions on how to use mdev
+//config: instead.
//config:
-//config: Provides compatibility with old device names on a devfs systems.
-//config: You should set it to true if you have devfs enabled.
-//config: The following keywords in devsfd.conf are supported:
-//config: "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
-//config: "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
-//config: "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
+//config: Provides compatibility with old device names on a devfs systems.
+//config: You should set it to true if you have devfs enabled.
+//config: The following keywords in devsfd.conf are supported:
+//config: "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
+//config: "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
+//config: "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
//config:
-//config: But only if they are written UPPERCASE!!!!!!!!
+//config: But only if they are written UPPERCASE!!!!!!!!
//config:
//config:config DEVFSD_MODLOAD
//config: bool "Adds support for MODLOAD keyword in devsfd.conf"
//config: default y
//config: depends on DEVFSD
//config: help
-//config: This actually doesn't work with busybox modutils but needs
-//config: the external modutils.
+//config: This actually doesn't work with busybox modutils but needs
+//config: the external modutils.
//config:
//config:config DEVFSD_FG_NP
//config: bool "Enable the -fg and -np options"
//config: default y
//config: depends on DEVFSD
//config: help
-//config: -fg Run the daemon in the foreground.
-//config: -np Exit after parsing the configuration file.
-//config: Do not poll for events.
+//config: -fg Run the daemon in the foreground.
+//config: -np Exit after parsing config. Do not poll for events.
//config:
//config:config DEVFSD_VERBOSE
//config: bool "Increases logging (and size)"
//config: default y
//config: depends on DEVFSD
//config: help
-//config: Increases logging to stderr or syslog.
+//config: Increases logging to stderr or syslog.
//config:
//config:config FEATURE_DEVFS
//config: bool "Use devfs names for all devices (obsolete)"
//config: default n
//config: select PLATFORM_LINUX
//config: help
-//config: This is obsolete and should NOT be used anymore.
-//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+//config: This is obsolete and should NOT be used anymore.
+//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead!
//config:
-//config: For legacy systems -- if there is no way around devfsd -- this
-//config: tells busybox to look for names like /dev/loop/0 instead of
-//config: /dev/loop0. If your /dev directory has normal names instead of
-//config: devfs names, you don't want this.
+//config: For legacy systems -- if there is no way around devfsd -- this
+//config: tells busybox to look for names like /dev/loop/0 instead of
+//config: /dev/loop0. If your /dev directory has normal names instead of
+//config: devfs names, you don't want this.
//applet:IF_DEVFSD(APPLET(devfsd, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/devmem.c b/miscutils/devmem.c
index ec911a707..624054770 100644
--- a/miscutils/devmem.c
+++ b/miscutils/devmem.c
@@ -7,8 +7,8 @@
//config: bool "devmem (2.5 kb)"
//config: default y
//config: help
-//config: devmem is a small program that reads and writes from physical
-//config: memory using /dev/mem.
+//config: devmem is a small program that reads and writes from physical
+//config: memory using /dev/mem.
//applet:IF_DEVMEM(APPLET(devmem, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/fbsplash.c b/miscutils/fbsplash.c
index 4c891deb0..9ac91e01e 100644
--- a/miscutils/fbsplash.c
+++ b/miscutils/fbsplash.c
@@ -25,20 +25,20 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Shows splash image and progress bar on framebuffer device.
-//config: Can be used during boot phase of an embedded device. ~2kb.
-//config: Usage:
-//config: - use kernel option 'vga=xxx' or otherwise enable fb device.
-//config: - put somewhere fbsplash.cfg file and an image in .ppm format.
-//config: - $ setsid fbsplash [params] &
+//config: Shows splash image and progress bar on framebuffer device.
+//config: Can be used during boot phase of an embedded device.
+//config: Usage:
+//config: - use kernel option 'vga=xxx' or otherwise enable fb device.
+//config: - put somewhere fbsplash.cfg file and an image in .ppm format.
+//config: - $ setsid fbsplash [params] &
//config: -c: hide cursor
//config: -d /dev/fbN: framebuffer device (if not /dev/fb0)
//config: -s path_to_image_file (can be "-" for stdin)
//config: -i path_to_cfg_file (can be "-" for stdin)
//config: -f path_to_fifo (can be "-" for stdin)
-//config: - if you want to run it only in presence of kernel parameter:
+//config: - if you want to run it only in presence of kernel parameter:
//config: grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
-//config: - commands for fifo:
+//config: - commands for fifo:
//config: "NN" (ASCII decimal number) - percentage to show on progress bar
//config: "exit" - well you guessed it
diff --git a/miscutils/flash_eraseall.c b/miscutils/flash_eraseall.c
index b64fda396..af9ebea24 100644
--- a/miscutils/flash_eraseall.c
+++ b/miscutils/flash_eraseall.c
@@ -13,8 +13,8 @@
//config: bool "flash_eraseall (5.5 kb)"
//config: default n # doesn't build on Ubuntu 8.04
//config: help
-//config: The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
-//config: This utility is used to erase the whole MTD device.
+//config: The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
+//config: This utility is used to erase the whole MTD device.
//applet:IF_FLASH_ERASEALL(APPLET(flash_eraseall, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/flash_lock_unlock.c b/miscutils/flash_lock_unlock.c
index 00de3da06..374eed5f6 100644
--- a/miscutils/flash_lock_unlock.c
+++ b/miscutils/flash_lock_unlock.c
@@ -7,15 +7,15 @@
//config: bool "flash_lock (2.1 kb)"
//config: default n # doesn't build on Ubuntu 8.04
//config: help
-//config: The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
-//config: utility locks part or all of the flash device.
+//config: The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
+//config: utility locks part or all of the flash device.
//config:
//config:config FLASH_UNLOCK
//config: bool "flash_unlock (1.3 kb)"
//config: default n # doesn't build on Ubuntu 8.04
//config: help
-//config: The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
-//config: utility unlocks part or all of the flash device.
+//config: The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
+//config: utility unlocks part or all of the flash device.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_FLASH_LOCK( APPLET_ODDNAME(flash_lock, flash_lock_unlock, BB_DIR_USR_SBIN, BB_SUID_DROP, flash_lock))
diff --git a/miscutils/flashcp.c b/miscutils/flashcp.c
index f6f61cf16..d4ac62df4 100644
--- a/miscutils/flashcp.c
+++ b/miscutils/flashcp.c
@@ -10,8 +10,8 @@
//config: bool "flashcp (5.4 kb)"
//config: default n # doesn't build on Ubuntu 8.04
//config: help
-//config: The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
-//config: This utility is used to copy images into a MTD device.
+//config: The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
+//config: This utility is used to copy images into a MTD device.
//applet:IF_FLASHCP(APPLET(flashcp, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/hdparm.c b/miscutils/hdparm.c
index af7fb99e9..0bbe6ca10 100644
--- a/miscutils/hdparm.c
+++ b/miscutils/hdparm.c
@@ -16,58 +16,58 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Get/Set hard drive parameters. Primarily intended for ATA
-//config: drives.
+//config: Get/Set hard drive parameters. Primarily intended for ATA
+//config: drives.
//config:
//config:config FEATURE_HDPARM_GET_IDENTITY
//config: bool "Support obtaining detailed information directly from drives"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the -I and -i options to obtain detailed information
-//config: directly from drives about their capabilities and supported ATA
-//config: feature set. If no device name is specified, hdparm will read
-//config: identify data from stdin. Enabling this option will add about 16k...
+//config: Enable the -I and -i options to obtain detailed information
+//config: directly from drives about their capabilities and supported ATA
+//config: feature set. If no device name is specified, hdparm will read
+//config: identify data from stdin. Enabling this option will add about 16k...
//config:
//config:config FEATURE_HDPARM_HDIO_SCAN_HWIF
//config: bool "Register an IDE interface (DANGEROUS)"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the 'hdparm -R' option to register an IDE interface.
-//config: This is dangerous stuff, so you should probably say N.
+//config: Enable the 'hdparm -R' option to register an IDE interface.
+//config: This is dangerous stuff, so you should probably say N.
//config:
//config:config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
//config: bool "Un-register an IDE interface (DANGEROUS)"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the 'hdparm -U' option to un-register an IDE interface.
-//config: This is dangerous stuff, so you should probably say N.
+//config: Enable the 'hdparm -U' option to un-register an IDE interface.
+//config: This is dangerous stuff, so you should probably say N.
//config:
//config:config FEATURE_HDPARM_HDIO_DRIVE_RESET
//config: bool "Perform device reset (DANGEROUS)"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the 'hdparm -w' option to perform a device reset.
-//config: This is dangerous stuff, so you should probably say N.
+//config: Enable the 'hdparm -w' option to perform a device reset.
+//config: This is dangerous stuff, so you should probably say N.
//config:
//config:config FEATURE_HDPARM_HDIO_TRISTATE_HWIF
//config: bool "Tristate device for hotswap (DANGEROUS)"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the 'hdparm -x' option to tristate device for hotswap,
-//config: and the '-b' option to get/set bus state. This is dangerous
-//config: stuff, so you should probably say N.
+//config: Enable the 'hdparm -x' option to tristate device for hotswap,
+//config: and the '-b' option to get/set bus state. This is dangerous
+//config: stuff, so you should probably say N.
//config:
//config:config FEATURE_HDPARM_HDIO_GETSET_DMA
//config: bool "Get/set using_dma flag"
//config: default y
//config: depends on HDPARM
//config: help
-//config: Enable the 'hdparm -d' option to get/set using_dma flag.
+//config: Enable the 'hdparm -d' option to get/set using_dma flag.
//applet:IF_HDPARM(APPLET(hdparm, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/i2c_tools.c b/miscutils/i2c_tools.c
index 578613978..ca2580e92 100644
--- a/miscutils/i2c_tools.c
+++ b/miscutils/i2c_tools.c
@@ -14,28 +14,28 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Read from I2C/SMBus chip registers.
+//config: Read from I2C/SMBus chip registers.
//config:
//config:config I2CSET
//config: bool "i2cset (6.9 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Set I2C registers.
+//config: Set I2C registers.
//config:
//config:config I2CDUMP
//config: bool "i2cdump (7.2 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Examine I2C registers.
+//config: Examine I2C registers.
//config:
//config:config I2CDETECT
//config: bool "i2cdetect (7.2 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Detect I2C chips.
+//config: Detect I2C chips.
//config:
//applet:IF_I2CGET(APPLET(i2cget, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/inotifyd.c b/miscutils/inotifyd.c
index 2e0163e35..0060797ed 100644
--- a/miscutils/inotifyd.c
+++ b/miscutils/inotifyd.c
@@ -30,8 +30,8 @@
//config: bool "inotifyd (3.5 kb)"
//config: default n # doesn't build on Knoppix 5
//config: help
-//config: Simple inotify daemon. Reports filesystem changes. Requires
-//config: kernel >= 2.6.13
+//config: Simple inotify daemon. Reports filesystem changes. Requires
+//config: kernel >= 2.6.13
//applet:IF_INOTIFYD(APPLET(inotifyd, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/less.c b/miscutils/less.c
index a4ef1518f..c1d5e1b39 100644
--- a/miscutils/less.c
+++ b/miscutils/less.c
@@ -25,8 +25,8 @@
//config: bool "less (15 kb)"
//config: default y
//config: help
-//config: 'less' is a pager, meaning that it displays text files. It possesses
-//config: a wide array of features, and is an improvement over 'more'.
+//config: 'less' is a pager, meaning that it displays text files. It possesses
+//config: a wide array of features, and is an improvement over 'more'.
//config:
//config:config FEATURE_LESS_MAXLINES
//config: int "Max number of input lines less will try to eat"
@@ -38,64 +38,64 @@
//config: default y
//config: depends on LESS
//config: help
-//config: This option adds the capability to search for matching left and right
-//config: brackets, facilitating programming.
+//config: This option adds the capability to search for matching left and right
+//config: brackets, facilitating programming.
//config:
//config:config FEATURE_LESS_FLAGS
//config: bool "Enable -m/-M"
//config: default y
//config: depends on LESS
//config: help
-//config: The -M/-m flag enables a more sophisticated status line.
+//config: The -M/-m flag enables a more sophisticated status line.
//config:
//config:config FEATURE_LESS_TRUNCATE
//config: bool "Enable -S"
//config: default y
//config: depends on LESS
//config: help
-//config: The -S flag causes long lines to be truncated rather than
-//config: wrapped.
+//config: The -S flag causes long lines to be truncated rather than
+//config: wrapped.
//config:
//config:config FEATURE_LESS_MARKS
//config: bool "Enable marks"
//config: default y
//config: depends on LESS
//config: help
-//config: Marks enable positions in a file to be stored for easy reference.
+//config: Marks enable positions in a file to be stored for easy reference.
//config:
//config:config FEATURE_LESS_REGEXP
//config: bool "Enable regular expressions"
//config: default y
//config: depends on LESS
//config: help
-//config: Enable regular expressions, allowing complex file searches.
+//config: Enable regular expressions, allowing complex file searches.
//config:
//config:config FEATURE_LESS_WINCH
//config: bool "Enable automatic resizing on window size changes"
//config: default y
//config: depends on LESS
//config: help
-//config: Makes less track window size changes.
+//config: Makes less track window size changes.
//config:
//config:config FEATURE_LESS_ASK_TERMINAL
//config: bool "Use 'tell me cursor position' ESC sequence to measure window"
//config: default y
//config: depends on FEATURE_LESS_WINCH
//config: help
-//config: Makes less track window size changes.
-//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
-//config: this option makes less perform a last-ditch effort to find it:
-//config: position cursor to 999,999 and ask terminal to report real
-//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin.
-//config: This is not clean but helps a lot on serial lines and such.
+//config: Makes less track window size changes.
+//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+//config: this option makes less perform a last-ditch effort to find it:
+//config: position cursor to 999,999 and ask terminal to report real
+//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+//config: This is not clean but helps a lot on serial lines and such.
//config:
//config:config FEATURE_LESS_DASHCMD
//config: bool "Enable flag changes ('-' command)"
//config: default y
//config: depends on LESS
//config: help
-//config: This enables the ability to change command-line flags within
-//config: less itself ('-' keyboard command).
+//config: This enables the ability to change command-line flags within
+//config: less itself ('-' keyboard command).
//config:
//config:config FEATURE_LESS_LINENUMS
//config: bool "Enable -N (dynamic switching of line numbers)"
diff --git a/miscutils/lsscsi.c b/miscutils/lsscsi.c
index 72fafefb0..b69ff1eef 100644
--- a/miscutils/lsscsi.c
+++ b/miscutils/lsscsi.c
@@ -11,10 +11,10 @@
//config: default y
//config: #select PLATFORM_LINUX
//config: help
-//config: lsscsi is a utility for displaying information about SCSI buses in the
-//config: system and devices connected to them.
+//config: lsscsi is a utility for displaying information about SCSI buses in the
+//config: system and devices connected to them.
//config:
-//config: This version uses sysfs (/sys/bus/scsi/devices) only.
+//config: This version uses sysfs (/sys/bus/scsi/devices) only.
//applet:IF_LSSCSI(APPLET(lsscsi, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/makedevs.c b/miscutils/makedevs.c
index 5f8593a0c..c2f86df01 100644
--- a/miscutils/makedevs.c
+++ b/miscutils/makedevs.c
@@ -10,20 +10,20 @@
//config: bool "makedevs (9.3 kb)"
//config: default y
//config: help
-//config: 'makedevs' is a utility used to create a batch of devices with
-//config: one command.
+//config: 'makedevs' is a utility used to create a batch of devices with
+//config: one command.
//config:
-//config: There are two choices for command line behaviour, the interface
-//config: as used by LEAF/Linux Router Project, or a device table file.
+//config: There are two choices for command line behaviour, the interface
+//config: as used by LEAF/Linux Router Project, or a device table file.
//config:
-//config: 'leaf' is traditionally what busybox follows, it allows multiple
-//config: devices of a particluar type to be created per command.
-//config: e.g. /dev/hda[0-9]
-//config: Device properties are passed as command line arguments.
+//config: 'leaf' is traditionally what busybox follows, it allows multiple
+//config: devices of a particluar type to be created per command.
+//config: e.g. /dev/hda[0-9]
+//config: Device properties are passed as command line arguments.
//config:
-//config: 'table' reads device properties from a file or stdin, allowing
-//config: a batch of unrelated devices to be made with one command.
-//config: User/group names are allowed as an alternative to uid/gid.
+//config: 'table' reads device properties from a file or stdin, allowing
+//config: a batch of unrelated devices to be made with one command.
+//config: User/group names are allowed as an alternative to uid/gid.
//config:
//config:choice
//config: prompt "Choose makedevs behaviour"
diff --git a/miscutils/man.c b/miscutils/man.c
index de6ef1961..a16202f25 100644
--- a/miscutils/man.c
+++ b/miscutils/man.c
@@ -6,7 +6,7 @@
//config: bool "man (27 kb)"
//config: default y
//config: help
-//config: Format and display manual pages.
+//config: Format and display manual pages.
//applet:IF_MAN(APPLET(man, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/microcom.c b/miscutils/microcom.c
index 436509c47..14b9f3baf 100644
--- a/miscutils/microcom.c
+++ b/miscutils/microcom.c
@@ -11,7 +11,7 @@
//config: bool "microcom (5.6 kb)"
//config: default y
//config: help
-//config: The poor man's minicom utility for chatting with serial port devices.
+//config: The poor man's minicom utility for chatting with serial port devices.
//applet:IF_MICROCOM(APPLET(microcom, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/mt.c b/miscutils/mt.c
index aec7bf775..fad656e95 100644
--- a/miscutils/mt.c
+++ b/miscutils/mt.c
@@ -6,9 +6,9 @@
//config: bool "mt (2.6 kb)"
//config: default y
//config: help
-//config: mt is used to control tape devices. You can use the mt utility
-//config: to advance or rewind a tape past a specified number of archive
-//config: files on the tape.
+//config: mt is used to control tape devices. You can use the mt utility
+//config: to advance or rewind a tape past a specified number of archive
+//config: files on the tape.
//applet:IF_MT(APPLET(mt, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/miscutils/nandwrite.c b/miscutils/nandwrite.c
index 8659b491f..14b1ed056 100644
--- a/miscutils/nandwrite.c
+++ b/miscutils/nandwrite.c
@@ -13,14 +13,14 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Write to the specified MTD device, with bad blocks awareness
+//config: Write to the specified MTD device, with bad blocks awareness
//config:
//config:config NANDDUMP
//config: bool "nanddump (6.3 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Dump the content of raw NAND chip
+//config: Dump the content of raw NAND chip
//applet:IF_NANDWRITE(APPLET(nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP))
//applet:IF_NANDDUMP(APPLET_ODDNAME(nanddump, nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP, nanddump))
diff --git a/miscutils/partprobe.c b/miscutils/partprobe.c
index 787def8cd..2c12a7d20 100644
--- a/miscutils/partprobe.c
+++ b/miscutils/partprobe.c
@@ -9,7 +9,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Ask kernel to rescan partition table.
+//config: Ask kernel to rescan partition table.
//applet:IF_PARTPROBE(APPLET(partprobe, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/raidautorun.c b/miscutils/raidautorun.c
index 45e398ebf..ecedf9ce2 100644
--- a/miscutils/raidautorun.c
+++ b/miscutils/raidautorun.c
@@ -12,8 +12,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: raidautorun tells the kernel md driver to
-//config: search and start RAID arrays.
+//config: raidautorun tells the kernel md driver to
+//config: search and start RAID arrays.
//applet:IF_RAIDAUTORUN(APPLET(raidautorun, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/readahead.c b/miscutils/readahead.c
index eb966b0f0..972302a18 100644
--- a/miscutils/readahead.c
+++ b/miscutils/readahead.c
@@ -15,17 +15,17 @@
//config: depends on LFS
//config: select PLATFORM_LINUX
//config: help
-//config: Preload the files listed on the command line into RAM cache so that
-//config: subsequent reads on these files will not block on disk I/O.
+//config: Preload the files listed on the command line into RAM cache so that
+//config: subsequent reads on these files will not block on disk I/O.
//config:
-//config: This applet just calls the readahead(2) system call on each file.
-//config: It is mainly useful in system startup scripts to preload files
-//config: or executables before they are used. When used at the right time
-//config: (in particular when a CPU bound process is running) it can
-//config: significantly speed up system startup.
+//config: This applet just calls the readahead(2) system call on each file.
+//config: It is mainly useful in system startup scripts to preload files
+//config: or executables before they are used. When used at the right time
+//config: (in particular when a CPU bound process is running) it can
+//config: significantly speed up system startup.
//config:
-//config: As readahead(2) blocks until each file has been read, it is best to
-//config: run this applet as a background job.
+//config: As readahead(2) blocks until each file has been read, it is best to
+//config: run this applet as a background job.
//applet:IF_READAHEAD(APPLET(readahead, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/rfkill.c b/miscutils/rfkill.c
index 2c083b144..546928402 100644
--- a/miscutils/rfkill.c
+++ b/miscutils/rfkill.c
@@ -12,12 +12,12 @@
//config: default n # doesn't build on Ubuntu 9.04
//config: select PLATFORM_LINUX
//config: help
-//config: Enable/disable wireless devices.
+//config: Enable/disable wireless devices.
//config:
-//config: rfkill list : list all wireless devices
-//config: rfkill list bluetooth : list all bluetooth devices
-//config: rfkill list 1 : list device corresponding to the given index
-//config: rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+//config: rfkill list : list all wireless devices
+//config: rfkill list bluetooth : list all bluetooth devices
+//config: rfkill list 1 : list device corresponding to the given index
+//config: rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
//config:
//applet:IF_RFKILL(APPLET(rfkill, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/runlevel.c b/miscutils/runlevel.c
index 79fa3c834..6b4742255 100644
--- a/miscutils/runlevel.c
+++ b/miscutils/runlevel.c
@@ -16,10 +16,10 @@
//config: default y
//config: depends on FEATURE_UTMP
//config: help
-//config: find the current and previous system runlevel.
+//config: find the current and previous system runlevel.
//config:
-//config: This applet uses utmp but does not rely on busybox supporing
-//config: utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+//config: This applet uses utmp but does not rely on busybox supporing
+//config: utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
//applet:IF_RUNLEVEL(APPLET(runlevel, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/rx.c b/miscutils/rx.c
index 3cf17843f..874a3f0a3 100644
--- a/miscutils/rx.c
+++ b/miscutils/rx.c
@@ -19,7 +19,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Receive files using the Xmodem protocol.
+//config: Receive files using the Xmodem protocol.
//applet:IF_RX(APPLET(rx, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/setserial.c b/miscutils/setserial.c
index a60950206..28a1bef18 100644
--- a/miscutils/setserial.c
+++ b/miscutils/setserial.c
@@ -13,7 +13,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Retrieve or set Linux serial port.
+//config: Retrieve or set Linux serial port.
//applet:IF_SETSERIAL(APPLET(setserial, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/miscutils/strings.c b/miscutils/strings.c
index 17c047079..ccb05f6d4 100644
--- a/miscutils/strings.c
+++ b/miscutils/strings.c
@@ -10,8 +10,8 @@
//config: bool "strings (4.3 kb)"
//config: default y
//config: help
-//config: strings prints the printable character sequences for each file
-//config: specified.
+//config: strings prints the printable character sequences for each file
+//config: specified.
//applet:IF_STRINGS(APPLET(strings, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/time.c b/miscutils/time.c
index c443ef909..60fc11f6e 100644
--- a/miscutils/time.c
+++ b/miscutils/time.c
@@ -12,9 +12,9 @@
//config: bool "time (7 kb)"
//config: default y
//config: help
-//config: The time command runs the specified program with the given arguments.
-//config: When the command finishes, time writes a message to standard output
-//config: giving timing statistics about this program run.
+//config: The time command runs the specified program with the given arguments.
+//config: When the command finishes, time writes a message to standard output
+//config: giving timing statistics about this program run.
//applet:IF_TIME(APPLET(time, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/ttysize.c b/miscutils/ttysize.c
index a2eeb9347..7f6a84308 100644
--- a/miscutils/ttysize.c
+++ b/miscutils/ttysize.c
@@ -13,10 +13,10 @@
//config: bool "ttysize (372 bytes)"
//config: default y
//config: help
-//config: A replacement for "stty size". Unlike stty, can report only width,
-//config: only height, or both, in any order. It also does not complain on
-//config: error, but returns default 80x24.
-//config: Usage in shell scripts: width=`ttysize w`.
+//config: A replacement for "stty size". Unlike stty, can report only width,
+//config: only height, or both, in any order. It also does not complain on
+//config: error, but returns default 80x24.
+//config: Usage in shell scripts: width=`ttysize w`.
//applet:IF_TTYSIZE(APPLET(ttysize, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/ubi_tools.c b/miscutils/ubi_tools.c
index 07f9a72ea..c6ba22adf 100644
--- a/miscutils/ubi_tools.c
+++ b/miscutils/ubi_tools.c
@@ -8,42 +8,42 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Attach MTD device to an UBI device.
+//config: Attach MTD device to an UBI device.
//config:
//config:config UBIDETACH
//config: bool "ubidetach (4.6 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Detach MTD device from an UBI device.
+//config: Detach MTD device from an UBI device.
//config:
//config:config UBIMKVOL
//config: bool "ubimkvol (5.8 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Create a UBI volume.
+//config: Create a UBI volume.
//config:
//config:config UBIRMVOL
//config: bool "ubirmvol (5.2 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Delete a UBI volume.
+//config: Delete a UBI volume.
//config:
//config:config UBIRSVOL
//config: bool "ubirsvol (4.6 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Resize a UBI volume.
+//config: Resize a UBI volume.
//config:
//config:config UBIUPDATEVOL
//config: bool "ubiupdatevol (5.6 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Update a UBI volume.
+//config: Update a UBI volume.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_UBIATTACH( APPLET_ODDNAME(ubiattach, ubi_tools, BB_DIR_USR_SBIN, BB_SUID_DROP, ubiattach))
diff --git a/miscutils/ubirename.c b/miscutils/ubirename.c
index 8fb42ee81..786c4b9fa 100644
--- a/miscutils/ubirename.c
+++ b/miscutils/ubirename.c
@@ -11,7 +11,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Utility to rename UBI volumes
+//config: Utility to rename UBI volumes
//applet:IF_UBIRENAME(APPLET(ubirename, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/volname.c b/miscutils/volname.c
index d80787f1a..6e6bbaa44 100644
--- a/miscutils/volname.c
+++ b/miscutils/volname.c
@@ -31,7 +31,7 @@
//config: bool "volname (1.7 kb)"
//config: default y
//config: help
-//config: Prints a CD-ROM volume name.
+//config: Prints a CD-ROM volume name.
//applet:IF_VOLNAME(APPLET(volname, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/miscutils/watchdog.c b/miscutils/watchdog.c
index 2ef4997b1..ec06bcb51 100644
--- a/miscutils/watchdog.c
+++ b/miscutils/watchdog.c
@@ -13,12 +13,12 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The watchdog utility is used with hardware or software watchdog
-//config: device drivers. It opens the specified watchdog device special file
-//config: and periodically writes a magic character to the device. If the
-//config: watchdog applet ever fails to write the magic character within a
-//config: certain amount of time, the watchdog device assumes the system has
-//config: hung, and will cause the hardware to reboot.
+//config: The watchdog utility is used with hardware or software watchdog
+//config: device drivers. It opens the specified watchdog device special file
+//config: and periodically writes a magic character to the device. If the
+//config: watchdog applet ever fails to write the magic character within a
+//config: certain amount of time, the watchdog device assumes the system has
+//config: hung, and will cause the hardware to reboot.
//applet:IF_WATCHDOG(APPLET(watchdog, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/modutils/Config.src b/modutils/Config.src
index 9b76c83d2..e413702bb 100644
--- a/modutils/Config.src
+++ b/modutils/Config.src
@@ -9,29 +9,29 @@ config MODPROBE_SMALL
bool "Simplified modutils"
default y
help
- Build smaller (~1.5 kbytes), simplified module tools.
+ Build smaller (~1.5 kbytes), simplified module tools.
- This option by itself does not enable any applets -
- you need to select applets individually below.
+ This option by itself does not enable any applets -
+ you need to select applets individually below.
- With this option modprobe does not require modules.dep file
- and does not use /etc/modules.conf file.
- It scans module files in /lib/modules/`uname -r` and
- determines dependencies and module alias names on the fly.
- This may make module loading slower, most notably
- when one needs to load module by alias (this requires
- scanning through module _bodies_).
+ With this option modprobe does not require modules.dep file
+ and does not use /etc/modules.conf file.
+ It scans module files in /lib/modules/`uname -r` and
+ determines dependencies and module alias names on the fly.
+ This may make module loading slower, most notably
+ when one needs to load module by alias (this requires
+ scanning through module _bodies_).
- At the first attempt to load a module by alias modprobe
- will try to generate modules.dep.bb file in order to speed up
- future loads by alias. Failure to do so (read-only /lib/modules,
- etc) is not reported, and future modprobes will be slow too.
+ At the first attempt to load a module by alias modprobe
+ will try to generate modules.dep.bb file in order to speed up
+ future loads by alias. Failure to do so (read-only /lib/modules,
+ etc) is not reported, and future modprobes will be slow too.
- NB: modules.dep.bb file format is not compatible
- with modules.dep file as created/used by standard module tools.
+ NB: modules.dep.bb file format is not compatible
+ with modules.dep file as created/used by standard module tools.
- Additional module parameters can be stored in
- /etc/modules/$module_name files.
+ Additional module parameters can be stored in
+ /etc/modules/$module_name files.
INSERT
@@ -42,145 +42,145 @@ config FEATURE_CMDLINE_MODULE_OPTIONS
default y
depends on INSMOD || MODPROBE
help
- Allow insmod and modprobe take module options from the applets'
- command line.
+ Allow insmod and modprobe take module options from the applets'
+ command line.
config FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
bool "Skip loading of already loaded modules"
default y
depends on MODPROBE_SMALL && (DEPMOD || INSMOD || MODPROBE)
help
- Check if the module is already loaded.
+ Check if the module is already loaded.
config FEATURE_2_4_MODULES
bool "Support version 2.2/2.4 Linux kernels"
default n
depends on (INSMOD || LSMOD || MODPROBE || RMMOD) && !MODPROBE_SMALL
help
- Support module loading for 2.2.x and 2.4.x Linux kernels.
- This increases size considerably. Say N unless you plan
- to run ancient kernels.
+ Support module loading for 2.2.x and 2.4.x Linux kernels.
+ This increases size considerably. Say N unless you plan
+ to run ancient kernels.
config FEATURE_INSMOD_VERSION_CHECKING
bool "Enable module version checking"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
- Support checking of versions for modules. This is used to
- ensure that the kernel and module are made for each other.
+ Support checking of versions for modules. This is used to
+ ensure that the kernel and module are made for each other.
config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
bool "Add module symbols to kernel symbol table"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
- By adding module symbols to the kernel symbol table, Oops messages
- occurring within kernel modules can be properly debugged. By enabling
- this feature, module symbols will always be added to the kernel symbol
- table for proper debugging support. If you are not interested in
- Oops messages from kernel modules, say N.
+ By adding module symbols to the kernel symbol table, Oops messages
+ occurring within kernel modules can be properly debugged. By enabling
+ this feature, module symbols will always be added to the kernel symbol
+ table for proper debugging support. If you are not interested in
+ Oops messages from kernel modules, say N.
config FEATURE_INSMOD_LOADINKMEM
bool "In kernel memory optimization (uClinux only)"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
- This is a special uClinux only memory optimization that lets insmod
- load the specified kernel module directly into kernel space, reducing
- memory usage by preventing the need for two copies of the module
- being loaded into memory.
+ This is a special uClinux only memory optimization that lets insmod
+ load the specified kernel module directly into kernel space, reducing
+ memory usage by preventing the need for two copies of the module
+ being loaded into memory.
config FEATURE_INSMOD_LOAD_MAP
bool "Enable insmod load map (-m) option"
default n
depends on FEATURE_2_4_MODULES && INSMOD
help
- Enabling this, one would be able to get a load map
- output on stdout. This makes kernel module debugging
- easier.
- If you don't plan to debug kernel modules, you
- don't need this option.
+ Enabling this, one would be able to get a load map
+ output on stdout. This makes kernel module debugging
+ easier.
+ If you don't plan to debug kernel modules, you
+ don't need this option.
config FEATURE_INSMOD_LOAD_MAP_FULL
bool "Symbols in load map"
default y
depends on FEATURE_INSMOD_LOAD_MAP
help
- Without this option, -m will only output section
- load map. With this option, -m will also output
- symbols load map.
+ Without this option, -m will only output section
+ load map. With this option, -m will also output
+ symbols load map.
config FEATURE_CHECK_TAINTED_MODULE
bool "Support tainted module checking with new kernels"
default y
depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL
help
- Support checking for tainted modules. These are usually binary
- only modules that will make the linux-kernel list ignore your
- support request.
- This option is required to support GPLONLY modules.
+ Support checking for tainted modules. These are usually binary
+ only modules that will make the linux-kernel list ignore your
+ support request.
+ This option is required to support GPLONLY modules.
config FEATURE_INSMOD_TRY_MMAP
bool "Try to load module from a mmap'ed area"
default n
depends on (INSMOD || MODPROBE) && !MODPROBE_SMALL
help
- This option causes module loading code to try to mmap
- module first. If it does not work (for example,
- it does not work for compressed modules), module will be read
- (and unpacked if needed) into a memory block allocated by malloc.
+ This option causes module loading code to try to mmap
+ module first. If it does not work (for example,
+ it does not work for compressed modules), module will be read
+ (and unpacked if needed) into a memory block allocated by malloc.
- The only case when mmap works but malloc does not is when
- you are trying to load a big module on a very memory-constrained
- machine. Malloc will momentarily need 2x as much memory as mmap.
+ The only case when mmap works but malloc does not is when
+ you are trying to load a big module on a very memory-constrained
+ machine. Malloc will momentarily need 2x as much memory as mmap.
- Choosing N saves about 250 bytes of code (on 32-bit x86).
+ Choosing N saves about 250 bytes of code (on 32-bit x86).
config FEATURE_MODUTILS_ALIAS
bool "Support module.aliases file"
default y
depends on (DEPMOD || MODPROBE) && !MODPROBE_SMALL
help
- Generate and parse modules.alias containing aliases for bus
- identifiers:
- alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
+ Generate and parse modules.alias containing aliases for bus
+ identifiers:
+ alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
- and aliases for logical modules names e.g.:
- alias padlock_aes aes
- alias aes_i586 aes
- alias aes_generic aes
+ and aliases for logical modules names e.g.:
+ alias padlock_aes aes
+ alias aes_i586 aes
+ alias aes_generic aes
- Say Y if unsure.
+ Say Y if unsure.
config FEATURE_MODUTILS_SYMBOLS
bool "Support module.symbols file"
default y
depends on (DEPMOD || MODPROBE) && !MODPROBE_SMALL
help
- Generate and parse modules.symbols containing aliases for
- symbol_request() kernel calls, such as:
- alias symbol:usb_sg_init usbcore
+ Generate and parse modules.symbols containing aliases for
+ symbol_request() kernel calls, such as:
+ alias symbol:usb_sg_init usbcore
- Say Y if unsure.
+ Say Y if unsure.
config DEFAULT_MODULES_DIR
string "Default directory containing modules"
default "/lib/modules"
depends on DEPMOD || MODPROBE || MODINFO
help
- Directory that contains kernel modules.
- Defaults to "/lib/modules"
+ Directory that contains kernel modules.
+ Defaults to "/lib/modules"
config DEFAULT_DEPMOD_FILE
string "Default name of modules.dep"
default "modules.dep"
depends on DEPMOD || MODPROBE || MODINFO
help
- Filename that contains kernel modules dependencies.
- Defaults to "modules.dep".
- If you configured the "simplified modutils" (MODPROBE_SMALL), a
- ".bb" suffix will be added after this name. Do not specify ".bb"
- here unless you intend your depmod or modprobe to work on
- "modules.dep.bb.bb" or such.
+ Filename that contains kernel modules dependencies.
+ Defaults to "modules.dep".
+ If you configured the "simplified modutils" (MODPROBE_SMALL), a
+ ".bb" suffix will be added after this name. Do not specify ".bb"
+ here unless you intend your depmod or modprobe to work on
+ "modules.dep.bb.bb" or such.
endmenu
diff --git a/modutils/depmod.c b/modutils/depmod.c
index f6e889d8f..004c67a11 100644
--- a/modutils/depmod.c
+++ b/modutils/depmod.c
@@ -12,9 +12,9 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: depmod generates modules.dep (and potentially modules.alias
-//config: and modules.symbols) that contain dependency information
-//config: for modprobe.
+//config: depmod generates modules.dep (and potentially modules.alias
+//config: and modules.symbols) that contain dependency information
+//config: for modprobe.
//applet:IF_DEPMOD(IF_NOT_MODPROBE_SMALL(APPLET(depmod, BB_DIR_SBIN, BB_SUID_DROP)))
diff --git a/modutils/insmod.c b/modutils/insmod.c
index 6f448f34d..b8ede8a81 100644
--- a/modutils/insmod.c
+++ b/modutils/insmod.c
@@ -11,7 +11,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: insmod is used to load specified modules in the running kernel.
+//config: insmod is used to load specified modules in the running kernel.
//applet:IF_INSMOD(IF_NOT_MODPROBE_SMALL(APPLET(insmod, BB_DIR_SBIN, BB_SUID_DROP)))
diff --git a/modutils/lsmod.c b/modutils/lsmod.c
index 9fe0eff22..4bf8f8481 100644
--- a/modutils/lsmod.c
+++ b/modutils/lsmod.c
@@ -12,16 +12,16 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: lsmod is used to display a list of loaded modules.
+//config: lsmod is used to display a list of loaded modules.
//config:
//config:config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
//config: bool "Pretty output"
//config: default y
//config: depends on LSMOD && !MODPROBE_SMALL
//config: help
-//config: This option makes output format of lsmod adjusted to
-//config: the format of module-init-tools for Linux kernel 2.6.
-//config: Increases size somewhat.
+//config: This option makes output format of lsmod adjusted to
+//config: the format of module-init-tools for Linux kernel 2.6.
+//config: Increases size somewhat.
//applet:IF_LSMOD(IF_NOT_MODPROBE_SMALL(APPLET(lsmod, BB_DIR_SBIN, BB_SUID_DROP)))
diff --git a/modutils/modinfo.c b/modutils/modinfo.c
index 6eae1b7b1..371c93991 100644
--- a/modutils/modinfo.c
+++ b/modutils/modinfo.c
@@ -10,7 +10,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Show information about a Linux Kernel module
+//config: Show information about a Linux Kernel module
//applet:IF_MODINFO(APPLET(modinfo, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/modutils/modprobe.c b/modutils/modprobe.c
index 6bcfb9bcd..1a7db09f2 100644
--- a/modutils/modprobe.c
+++ b/modutils/modprobe.c
@@ -12,19 +12,19 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Handle the loading of modules, and their dependencies on a high
-//config: level.
+//config: Handle the loading of modules, and their dependencies on a high
+//config: level.
//config:
//config:config FEATURE_MODPROBE_BLACKLIST
//config: bool "Blacklist support"
//config: default y
//config: depends on MODPROBE && !MODPROBE_SMALL
//config: help
-//config: Say 'y' here to enable support for the 'blacklist' command in
-//config: modprobe.conf. This prevents the alias resolver to resolve
-//config: blacklisted modules. This is useful if you want to prevent your
-//config: hardware autodetection scripts to load modules like evdev, frame
-//config: buffer drivers etc.
+//config: Say 'y' here to enable support for the 'blacklist' command in
+//config: modprobe.conf. This prevents the alias resolver to resolve
+//config: blacklisted modules. This is useful if you want to prevent your
+//config: hardware autodetection scripts to load modules like evdev, frame
+//config: buffer drivers etc.
//applet:IF_MODPROBE(IF_NOT_MODPROBE_SMALL(APPLET(modprobe, BB_DIR_SBIN, BB_SUID_DROP)))
diff --git a/modutils/rmmod.c b/modutils/rmmod.c
index 1e87abf3a..d60e49413 100644
--- a/modutils/rmmod.c
+++ b/modutils/rmmod.c
@@ -12,7 +12,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: rmmod is used to unload specified modules from the kernel.
+//config: rmmod is used to unload specified modules from the kernel.
//applet:IF_RMMOD(IF_NOT_MODPROBE_SMALL(APPLET(rmmod, BB_DIR_SBIN, BB_SUID_DROP)))
diff --git a/networking/Config.src b/networking/Config.src
index 0adb1e2f9..492c60da4 100644
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -9,42 +9,42 @@ config FEATURE_IPV6
bool "Enable IPv6 support"
default y
help
- Enable IPv6 support in busybox.
- This adds IPv6 support in the networking applets.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
config FEATURE_UNIX_LOCAL
bool "Enable Unix domain socket support (usually not needed)"
default n
help
- Enable Unix domain socket support in all busybox networking
- applets. Address of the form local:/path/to/unix/socket
- will be recognized.
+ Enable Unix domain socket support in all busybox networking
+ applets. Address of the form local:/path/to/unix/socket
+ will be recognized.
- This extension is almost never used in real world usage.
- You most likely want to say N.
+ This extension is almost never used in real world usage.
+ You most likely want to say N.
config FEATURE_PREFER_IPV4_ADDRESS
bool "Prefer IPv4 addresses from DNS queries"
default y
depends on FEATURE_IPV6
help
- Use IPv4 address of network host if it has one.
+ Use IPv4 address of network host if it has one.
- If this option is off, the first returned address will be used.
- This may cause problems when your DNS server is IPv6-capable and
- is returning IPv6 host addresses too. If IPv6 address
- precedes IPv4 one in DNS reply, busybox network applets
- (e.g. wget) will use IPv6 address. On an IPv6-incapable host
- or network applets will fail to connect to the host
- using IPv6 address.
+ If this option is off, the first returned address will be used.
+ This may cause problems when your DNS server is IPv6-capable and
+ is returning IPv6 host addresses too. If IPv6 address
+ precedes IPv4 one in DNS reply, busybox network applets
+ (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+ or network applets will fail to connect to the host
+ using IPv6 address.
config VERBOSE_RESOLUTION_ERRORS
bool "Verbose resolution errors"
default n
help
- Enable if you are not satisfied with simplistic
- "can't resolve 'hostname.com'" and want to know more.
- This may increase size of your executable a bit.
+ Enable if you are not satisfied with simplistic
+ "can't resolve 'hostname.com'" and want to know more.
+ This may increase size of your executable a bit.
INSERT
@@ -55,8 +55,8 @@ config IFUPDOWN_UDHCPC_CMD_OPTIONS
default "-R -n"
depends on IFUP || IFDOWN
help
- Command line options to pass to udhcpc from ifup.
- Intended to alter options not available in /etc/network/interfaces.
- (IE: --syslog --background etc...)
+ Command line options to pass to udhcpc from ifup.
+ Intended to alter options not available in /etc/network/interfaces.
+ (IE: --syslog --background etc...)
endmenu
diff --git a/networking/arp.c b/networking/arp.c
index f23ec8629..177ab1571 100644
--- a/networking/arp.c
+++ b/networking/arp.c
@@ -17,7 +17,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Manipulate the system ARP cache.
+//config: Manipulate the system ARP cache.
//applet:IF_ARP(APPLET(arp, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/arping.c b/networking/arping.c
index bc6b6be6a..71672957e 100644
--- a/networking/arping.c
+++ b/networking/arping.c
@@ -10,7 +10,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Ping hosts by ARP packets.
+//config: Ping hosts by ARP packets.
//config:
//applet:IF_ARPING(APPLET(arping, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/brctl.c b/networking/brctl.c
index bedf8031a..690791e4c 100644
--- a/networking/brctl.c
+++ b/networking/brctl.c
@@ -17,27 +17,27 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Manage ethernet bridges.
-//config: Supports addbr/delbr and addif/delif.
+//config: Manage ethernet bridges.
+//config: Supports addbr/delbr and addif/delif.
//config:
//config:config FEATURE_BRCTL_FANCY
//config: bool "Fancy options"
//config: default y
//config: depends on BRCTL
//config: help
-//config: Add support for extended option like:
-//config: setageing, setfd, sethello, setmaxage,
-//config: setpathcost, setportprio, setbridgeprio,
-//config: stp
-//config: This adds about 600 bytes.
+//config: Add support for extended option like:
+//config: setageing, setfd, sethello, setmaxage,
+//config: setpathcost, setportprio, setbridgeprio,
+//config: stp
+//config: This adds about 600 bytes.
//config:
//config:config FEATURE_BRCTL_SHOW
//config: bool "Support show"
//config: default y
//config: depends on BRCTL && FEATURE_BRCTL_FANCY
//config: help
-//config: Add support for option which prints the current config:
-//config: show
+//config: Add support for option which prints the current config:
+//config: show
//applet:IF_BRCTL(APPLET(brctl, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/dnsd.c b/networking/dnsd.c
index 9e058584a..37a80309d 100644
--- a/networking/dnsd.c
+++ b/networking/dnsd.c
@@ -20,7 +20,7 @@
//config: bool "dnsd (9.8 kb)"
//config: default y
//config: help
-//config: Small and static DNS server daemon.
+//config: Small and static DNS server daemon.
//applet:IF_DNSD(APPLET(dnsd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ether-wake.c b/networking/ether-wake.c
index 16155df54..52522e76d 100644
--- a/networking/ether-wake.c
+++ b/networking/ether-wake.c
@@ -68,7 +68,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Send a magic packet to wake up sleeping machines.
+//config: Send a magic packet to wake up sleeping machines.
//applet:IF_ETHER_WAKE(APPLET_ODDNAME(ether-wake, ether_wake, BB_DIR_USR_SBIN, BB_SUID_DROP, ether_wake))
diff --git a/networking/ftpd.c b/networking/ftpd.c
index e923e78b2..aee00e1c3 100644
--- a/networking/ftpd.c
+++ b/networking/ftpd.c
@@ -15,32 +15,32 @@
//config: bool "ftpd (30 kb)"
//config: default y
//config: help
-//config: Simple FTP daemon. You have to run it via inetd.
+//config: Simple FTP daemon. You have to run it via inetd.
//config:
//config:config FEATURE_FTPD_WRITE
//config: bool "Enable upload commands"
//config: default y
//config: depends on FTPD
//config: help
-//config: Enable all kinds of FTP upload commands (-w option)
+//config: Enable all kinds of FTP upload commands (-w option)
//config:
//config:config FEATURE_FTPD_ACCEPT_BROKEN_LIST
//config: bool "Enable workaround for RFC-violating clients"
//config: default y
//config: depends on FTPD
//config: help
-//config: Some ftp clients (among them KDE's Konqueror) issue illegal
-//config: "LIST -l" requests. This option works around such problems.
-//config: It might prevent you from listing files starting with "-" and
-//config: it increases the code size by ~40 bytes.
-//config: Most other ftp servers seem to behave similar to this.
+//config: Some ftp clients (among them KDE's Konqueror) issue illegal
+//config: "LIST -l" requests. This option works around such problems.
+//config: It might prevent you from listing files starting with "-" and
+//config: it increases the code size by ~40 bytes.
+//config: Most other ftp servers seem to behave similar to this.
//config:
//config:config FEATURE_FTPD_AUTHENTICATION
//config: bool "Enable authentication"
//config: default y
//config: depends on FTPD
//config: help
-//config: Enable basic system login as seen in telnet etc.
+//config: Enable basic system login as seen in telnet etc.
//applet:IF_FTPD(APPLET(ftpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ftpgetput.c b/networking/ftpgetput.c
index b967cd7d9..d70f4ca77 100644
--- a/networking/ftpgetput.c
+++ b/networking/ftpgetput.c
@@ -16,13 +16,13 @@
//config: bool "ftpget (8 kb)"
//config: default y
//config: help
-//config: Retrieve a remote file via FTP.
+//config: Retrieve a remote file via FTP.
//config:
//config:config FTPPUT
//config: bool "ftpput (7.7 kb)"
//config: default y
//config: help
-//config: Store a remote file via FTP.
+//config: Store a remote file via FTP.
//config:
//config:config FEATURE_FTPGETPUT_LONG_OPTIONS
//config: bool "Enable long options in ftpget/ftpput"
diff --git a/networking/hostname.c b/networking/hostname.c
index 07d746c0f..4b305d2b6 100644
--- a/networking/hostname.c
+++ b/networking/hostname.c
@@ -14,13 +14,13 @@
//config: bool "hostname (5.6 kb)"
//config: default y
//config: help
-//config: Show or set the system's host name.
+//config: Show or set the system's host name.
//config:
//config:config DNSDOMAINNAME
//config: bool "dnsdomainname (3.6 kb)"
//config: default y
//config: help
-//config: Alias to "hostname -d".
+//config: Alias to "hostname -d".
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_DNSDOMAINNAME(APPLET_ODDNAME(dnsdomainname, hostname, BB_DIR_BIN, BB_SUID_DROP, dnsdomainname))
diff --git a/networking/httpd.c b/networking/httpd.c
index 7ad6d0878..cfc07075b 100644
--- a/networking/httpd.c
+++ b/networking/httpd.c
@@ -102,120 +102,120 @@
//config: bool "httpd (32 kb)"
//config: default y
//config: help
-//config: HTTP server.
+//config: HTTP server.
//config:
//config:config FEATURE_HTTPD_RANGES
//config: bool "Support 'Ranges:' header"
//config: default y
//config: depends on HTTPD
//config: help
-//config: Makes httpd emit "Accept-Ranges: bytes" header and understand
-//config: "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
-//config: downloads, seeking in multimedia players etc.
+//config: Makes httpd emit "Accept-Ranges: bytes" header and understand
+//config: "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+//config: downloads, seeking in multimedia players etc.
//config:
//config:config FEATURE_HTTPD_SETUID
//config: bool "Enable -u <user> option"
//config: default y
//config: depends on HTTPD
//config: help
-//config: This option allows the server to run as a specific user
-//config: rather than defaulting to the user that starts the server.
-//config: Use of this option requires special privileges to change to a
-//config: different user.
+//config: This option allows the server to run as a specific user
+//config: rather than defaulting to the user that starts the server.
+//config: Use of this option requires special privileges to change to a
+//config: different user.
//config:
//config:config FEATURE_HTTPD_BASIC_AUTH
//config: bool "Enable Basic http Authentication"
//config: default y
//config: depends on HTTPD
//config: help
-//config: Utilizes password settings from /etc/httpd.conf for basic
-//config: authentication on a per url basis.
-//config: Example for httpd.conf file:
-//config: /adm:toor:PaSsWd
+//config: Utilizes password settings from /etc/httpd.conf for basic
+//config: authentication on a per url basis.
+//config: Example for httpd.conf file:
+//config: /adm:toor:PaSsWd
//config:
//config:config FEATURE_HTTPD_AUTH_MD5
//config: bool "Support MD5 crypted passwords for http Authentication"
//config: default y
//config: depends on FEATURE_HTTPD_BASIC_AUTH
//config: help
-//config: Enables encrypted passwords, and wildcard user/passwords
-//config: in httpd.conf file.
-//config: User '*' means 'any system user name is ok',
-//config: password of '*' means 'use system password for this user'
-//config: Examples:
-//config: /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
-//config: /adm:root:*
-//config: /wiki:*:*
+//config: Enables encrypted passwords, and wildcard user/passwords
+//config: in httpd.conf file.
+//config: User '*' means 'any system user name is ok',
+//config: password of '*' means 'use system password for this user'
+//config: Examples:
+//config: /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+//config: /adm:root:*
+//config: /wiki:*:*
//config:
//config:config FEATURE_HTTPD_CGI
//config: bool "Support Common Gateway Interface (CGI)"
//config: default y
//config: depends on HTTPD
//config: help
-//config: This option allows scripts and executables to be invoked
-//config: when specific URLs are requested.
+//config: This option allows scripts and executables to be invoked
+//config: when specific URLs are requested.
//config:
//config:config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
//config: bool "Support running scripts through an interpreter"
//config: default y
//config: depends on FEATURE_HTTPD_CGI
//config: help
-//config: This option enables support for running scripts through an
-//config: interpreter. Turn this on if you want PHP scripts to work
-//config: properly. You need to supply an additional line in your
-//config: httpd.conf file:
-//config: *.php:/path/to/your/php
+//config: This option enables support for running scripts through an
+//config: interpreter. Turn this on if you want PHP scripts to work
+//config: properly. You need to supply an additional line in your
+//config: httpd.conf file:
+//config: *.php:/path/to/your/php
//config:
//config:config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
//config: bool "Set REMOTE_PORT environment variable for CGI"
//config: default y
//config: depends on FEATURE_HTTPD_CGI
//config: help
-//config: Use of this option can assist scripts in generating
-//config: references that contain a unique port number.
+//config: Use of this option can assist scripts in generating
+//config: references that contain a unique port number.
//config:
//config:config FEATURE_HTTPD_ENCODE_URL_STR
//config: bool "Enable -e option (useful for CGIs written as shell scripts)"
//config: default y
//config: depends on HTTPD
//config: help
-//config: This option allows html encoding of arbitrary strings for display
-//config: by the browser. Output goes to stdout.
-//config: For example, httpd -e "<Hello World>" produces
-//config: "&#60Hello&#32World&#62".
+//config: This option allows html encoding of arbitrary strings for display
+//config: by the browser. Output goes to stdout.
+//config: For example, httpd -e "<Hello World>" produces
+//config: "&#60Hello&#32World&#62".
//config:
//config:config FEATURE_HTTPD_ERROR_PAGES
//config: bool "Support custom error pages"
//config: default y
//config: depends on HTTPD
//config: help
-//config: This option allows you to define custom error pages in
-//config: the configuration file instead of the default HTTP status
-//config: error pages. For instance, if you add the line:
-//config: E404:/path/e404.html
-//config: in the config file, the server will respond the specified
-//config: '/path/e404.html' file instead of the terse '404 NOT FOUND'
-//config: message.
+//config: This option allows you to define custom error pages in
+//config: the configuration file instead of the default HTTP status
+//config: error pages. For instance, if you add the line:
+//config: E404:/path/e404.html
+//config: in the config file, the server will respond the specified
+//config: '/path/e404.html' file instead of the terse '404 NOT FOUND'
+//config: message.
//config:
//config:config FEATURE_HTTPD_PROXY
//config: bool "Support reverse proxy"
//config: default y
//config: depends on HTTPD
//config: help
-//config: This option allows you to define URLs that will be forwarded
-//config: to another HTTP server. To setup add the following line to the
-//config: configuration file
-//config: P:/url/:http://hostname[:port]/new/path/
-//config: Then a request to /url/myfile will be forwarded to
-//config: http://hostname[:port]/new/path/myfile.
+//config: This option allows you to define URLs that will be forwarded
+//config: to another HTTP server. To setup add the following line to the
+//config: configuration file
+//config: P:/url/:http://hostname[:port]/new/path/
+//config: Then a request to /url/myfile will be forwarded to
+//config: http://hostname[:port]/new/path/myfile.
//config:
//config:config FEATURE_HTTPD_GZIP
//config: bool "Support GZIP content encoding"
//config: default y
//config: depends on HTTPD
//config: help
-//config: Makes httpd send files using GZIP content encoding if the
-//config: client supports it and a pre-compressed <file>.gz exists.
+//config: Makes httpd send files using GZIP content encoding if the
+//config: client supports it and a pre-compressed <file>.gz exists.
//applet:IF_HTTPD(APPLET(httpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ifconfig.c b/networking/ifconfig.c
index a08a0a18d..d1e9c58dc 100644
--- a/networking/ifconfig.c
+++ b/networking/ifconfig.c
@@ -30,48 +30,48 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Ifconfig is used to configure the kernel-resident network interfaces.
+//config: Ifconfig is used to configure the kernel-resident network interfaces.
//config:
//config:config FEATURE_IFCONFIG_STATUS
//config: bool "Enable status reporting output (+7k)"
//config: default y
//config: depends on IFCONFIG
//config: help
-//config: If ifconfig is called with no arguments it will display the status
-//config: of the currently active interfaces.
+//config: If ifconfig is called with no arguments it will display the status
+//config: of the currently active interfaces.
//config:
//config:config FEATURE_IFCONFIG_SLIP
//config: bool "Enable slip-specific options \"keepalive\" and \"outfill\""
//config: default y
//config: depends on IFCONFIG
//config: help
-//config: Allow "keepalive" and "outfill" support for SLIP. If you're not
-//config: planning on using serial lines, leave this unchecked.
+//config: Allow "keepalive" and "outfill" support for SLIP. If you're not
+//config: planning on using serial lines, leave this unchecked.
//config:
//config:config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
//config: bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
//config: default y
//config: depends on IFCONFIG
//config: help
-//config: Allow the start address for shared memory, start address for I/O,
-//config: and/or the interrupt line used by the specified device.
+//config: Allow the start address for shared memory, start address for I/O,
+//config: and/or the interrupt line used by the specified device.
//config:
//config:config FEATURE_IFCONFIG_HW
//config: bool "Enable option \"hw\" (ether only)"
//config: default y
//config: depends on IFCONFIG
//config: help
-//config: Set the hardware address of this interface, if the device driver
-//config: supports this operation. Currently, we only support the 'ether'
-//config: class.
+//config: Set the hardware address of this interface, if the device driver
+//config: supports this operation. Currently, we only support the 'ether'
+//config: class.
//config:
//config:config FEATURE_IFCONFIG_BROADCAST_PLUS
//config: bool "Set the broadcast automatically"
//config: default y
//config: depends on IFCONFIG
//config: help
-//config: Setting this will make ifconfig attempt to find the broadcast
-//config: automatically if the value '+' is used.
+//config: Setting this will make ifconfig attempt to find the broadcast
+//config: automatically if the value '+' is used.
//applet:IF_IFCONFIG(APPLET(ifconfig, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/ifenslave.c b/networking/ifenslave.c
index 7619fc376..26e5e8cf3 100644
--- a/networking/ifenslave.c
+++ b/networking/ifenslave.c
@@ -102,8 +102,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Userspace application to bind several interfaces
-//config: to a logical interface (use with kernel bonding driver).
+//config: Userspace application to bind several interfaces
+//config: to a logical interface (use with kernel bonding driver).
//applet:IF_IFENSLAVE(APPLET(ifenslave, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/ifplugd.c b/networking/ifplugd.c
index 635417e05..c36bc9524 100644
--- a/networking/ifplugd.c
+++ b/networking/ifplugd.c
@@ -11,7 +11,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Network interface plug detection daemon.
+//config: Network interface plug detection daemon.
//applet:IF_IFPLUGD(APPLET(ifplugd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ifupdown.c b/networking/ifupdown.c
index e067543fa..f8c29ab00 100644
--- a/networking/ifupdown.c
+++ b/networking/ifupdown.c
@@ -21,63 +21,63 @@
//config: bool "ifup (17 kb)"
//config: default y
//config: help
-//config: Activate the specified interfaces. This applet makes use
-//config: of either "ifconfig" and "route" or the "ip" command to actually
-//config: configure network interfaces. Therefore, you will probably also want
-//config: to enable either IFCONFIG and ROUTE, or enable
-//config: FEATURE_IFUPDOWN_IP and the various IP options. Of
-//config: course you could use non-busybox versions of these programs, so
-//config: against my better judgement (since this will surely result in plenty
-//config: of support questions on the mailing list), I do not force you to
-//config: enable these additional options. It is up to you to supply either
-//config: "ifconfig", "route" and "run-parts" or the "ip" command, either
-//config: via busybox or via standalone utilities.
+//config: Activate the specified interfaces. This applet makes use
+//config: of either "ifconfig" and "route" or the "ip" command to actually
+//config: configure network interfaces. Therefore, you will probably also want
+//config: to enable either IFCONFIG and ROUTE, or enable
+//config: FEATURE_IFUPDOWN_IP and the various IP options. Of
+//config: course you could use non-busybox versions of these programs, so
+//config: against my better judgement (since this will surely result in plenty
+//config: of support questions on the mailing list), I do not force you to
+//config: enable these additional options. It is up to you to supply either
+//config: "ifconfig", "route" and "run-parts" or the "ip" command, either
+//config: via busybox or via standalone utilities.
//config:
//config:config IFDOWN
//config: bool "ifdown (15 kb)"
//config: default y
//config: help
-//config: Deactivate the specified interfaces.
+//config: Deactivate the specified interfaces.
//config:
//config:config IFUPDOWN_IFSTATE_PATH
//config: string "Absolute path to ifstate file"
//config: default "/var/run/ifstate"
//config: depends on IFUP || IFDOWN
//config: help
-//config: ifupdown keeps state information in a file called ifstate.
-//config: Typically it is located in /var/run/ifstate, however
-//config: some distributions tend to put it in other places
-//config: (debian, for example, uses /etc/network/run/ifstate).
-//config: This config option defines location of ifstate.
+//config: ifupdown keeps state information in a file called ifstate.
+//config: Typically it is located in /var/run/ifstate, however
+//config: some distributions tend to put it in other places
+//config: (debian, for example, uses /etc/network/run/ifstate).
+//config: This config option defines location of ifstate.
//config:
//config:config FEATURE_IFUPDOWN_IP
//config: bool "Use ip tool (else ifconfig/route is used)"
//config: default y
//config: depends on IFUP || IFDOWN
//config: help
-//config: Use the iproute "ip" command to implement "ifup" and "ifdown", rather
-//config: than the default of using the older "ifconfig" and "route" utilities.
+//config: Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+//config: than the default of using the older "ifconfig" and "route" utilities.
//config:
-//config: If Y: you must install either the full-blown iproute2 package
-//config: or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
-//config: will not work.
+//config: If Y: you must install either the full-blown iproute2 package
+//config: or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
+//config: will not work.
//config:
-//config: If N: you must install either the full-blown ifconfig and route
-//config: utilities, or enable these applets in Busybox.
+//config: If N: you must install either the full-blown ifconfig and route
+//config: utilities, or enable these applets in Busybox.
//config:
//config:config FEATURE_IFUPDOWN_IPV4
//config: bool "Support IPv4"
//config: default y
//config: depends on IFUP || IFDOWN
//config: help
-//config: If you want ifup/ifdown to talk IPv4, leave this on.
+//config: If you want ifup/ifdown to talk IPv4, leave this on.
//config:
//config:config FEATURE_IFUPDOWN_IPV6
//config: bool "Support IPv6"
//config: default y
//config: depends on (IFUP || IFDOWN) && FEATURE_IPV6
//config: help
-//config: If you need support for IPv6, turn this option on.
+//config: If you need support for IPv6, turn this option on.
//config:
//UNUSED:
////////:config FEATURE_IFUPDOWN_IPX
@@ -93,18 +93,18 @@
//config: default y
//config: depends on IFUP || IFDOWN
//config: help
-//config: This enables support for the "mapping" stanza, unless you have
-//config: a weird network setup you don't need it.
+//config: This enables support for the "mapping" stanza, unless you have
+//config: a weird network setup you don't need it.
//config:
//config:config FEATURE_IFUPDOWN_EXTERNAL_DHCP
//config: bool "Support external DHCP clients"
//config: default n
//config: depends on IFUP || IFDOWN
//config: help
-//config: This enables support for the external dhcp clients. Clients are
-//config: tried in the following order: dhcpcd, dhclient, pump and udhcpc.
-//config: Otherwise, if udhcpc applet is enabled, it is used.
-//config: Otherwise, ifup/ifdown will have no support for DHCP.
+//config: This enables support for the external dhcp clients. Clients are
+//config: tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+//config: Otherwise, if udhcpc applet is enabled, it is used.
+//config: Otherwise, ifup/ifdown will have no support for DHCP.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_IFUP( APPLET_ODDNAME(ifup, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifup))
diff --git a/networking/inetd.c b/networking/inetd.c
index 9a9956857..2991edc09 100644
--- a/networking/inetd.c
+++ b/networking/inetd.c
@@ -158,42 +158,42 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: Internet superserver daemon
+//config: Internet superserver daemon
//config:
//config:config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
//config: bool "Support echo service"
//config: default y
//config: depends on INETD
//config: help
-//config: Echo received data internal inetd service
+//config: Echo received data internal inetd service
//config:
//config:config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
//config: bool "Support discard service"
//config: default y
//config: depends on INETD
//config: help
-//config: Internet /dev/null internal inetd service
+//config: Internet /dev/null internal inetd service
//config:
//config:config FEATURE_INETD_SUPPORT_BUILTIN_TIME
//config: bool "Support time service"
//config: default y
//config: depends on INETD
//config: help
-//config: Return 32 bit time since 1900 internal inetd service
+//config: Return 32 bit time since 1900 internal inetd service
//config:
//config:config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
//config: bool "Support daytime service"
//config: default y
//config: depends on INETD
//config: help
-//config: Return human-readable time internal inetd service
+//config: Return human-readable time internal inetd service
//config:
//config:config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
//config: bool "Support chargen service"
//config: default y
//config: depends on INETD
//config: help
-//config: Familiar character generator internal inetd service
+//config: Familiar character generator internal inetd service
//config:
//config:config FEATURE_INETD_RPC
//config: bool "Support RPC services"
@@ -201,7 +201,7 @@
//config: depends on INETD
//config: select FEATURE_HAVE_RPC
//config: help
-//config: Support Sun-RPC based services
+//config: Support Sun-RPC based services
//applet:IF_INETD(APPLET(inetd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ip.c b/networking/ip.c
index de3a65bae..cca7cbe12 100644
--- a/networking/ip.c
+++ b/networking/ip.c
@@ -13,9 +13,9 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The "ip" applet is a TCP/IP interface configuration and routing
-//config: utility. You generally don't need "ip" to use busybox with
-//config: TCP/IP.
+//config: The "ip" applet is a TCP/IP interface configuration and routing
+//config: utility. You generally don't need "ip" to use busybox with
+//config: TCP/IP.
//config:
//config:config IPADDR
//config: bool "ipaddr (14 kb)"
@@ -23,7 +23,7 @@
//config: select FEATURE_IP_ADDRESS
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip addr: ipaddr
+//config: Support short form of ip addr: ipaddr
//config:
//config:config IPLINK
//config: bool "iplink (16 kb)"
@@ -31,7 +31,7 @@
//config: select FEATURE_IP_LINK
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip link: iplink
+//config: Support short form of ip link: iplink
//config:
//config:config IPROUTE
//config: bool "iproute (15 kb)"
@@ -39,7 +39,7 @@
//config: select FEATURE_IP_ROUTE
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip route: iproute
+//config: Support short form of ip route: iproute
//config:
//config:config IPTUNNEL
//config: bool "iptunnel (9.6 kb)"
@@ -47,7 +47,7 @@
//config: select FEATURE_IP_TUNNEL
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip tunnel: iptunnel
+//config: Support short form of ip tunnel: iptunnel
//config:
//config:config IPRULE
//config: bool "iprule (10 kb)"
@@ -55,7 +55,7 @@
//config: select FEATURE_IP_RULE
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip rule: iprule
+//config: Support short form of ip rule: iprule
//config:
//config:config IPNEIGH
//config: bool "ipneigh (8.3 kb)"
@@ -63,66 +63,66 @@
//config: select FEATURE_IP_NEIGH
//config: select PLATFORM_LINUX
//config: help
-//config: Support short form of ip neigh: ipneigh
+//config: Support short form of ip neigh: ipneigh
//config:
//config:config FEATURE_IP_ADDRESS
//config: bool "ip address"
//config: default y
//config: depends on IP || IPADDR
//config: help
-//config: Address manipulation support for the "ip" applet.
+//config: Address manipulation support for the "ip" applet.
//config:
//config:config FEATURE_IP_LINK
//config: bool "ip link"
//config: default y
//config: depends on IP || IPLINK
//config: help
-//config: Configure network devices with "ip".
+//config: Configure network devices with "ip".
//config:
//config:config FEATURE_IP_ROUTE
//config: bool "ip route"
//config: default y
//config: depends on IP || IPROUTE
//config: help
-//config: Add support for routing table management to "ip".
+//config: Add support for routing table management to "ip".
//config:
//config:config FEATURE_IP_ROUTE_DIR
//config: string "ip route configuration directory"
//config: default "/etc/iproute2"
//config: depends on FEATURE_IP_ROUTE
//config: help
-//config: Location of the "ip" applet routing configuration.
+//config: Location of the "ip" applet routing configuration.
//config:
//config:config FEATURE_IP_TUNNEL
//config: bool "ip tunnel"
//config: default y
//config: depends on IP || IPTUNNEL
//config: help
-//config: Add support for tunneling commands to "ip".
+//config: Add support for tunneling commands to "ip".
//config:
//config:config FEATURE_IP_RULE
//config: bool "ip rule"
//config: default y
//config: depends on IP || IPRULE
//config: help
-//config: Add support for rule commands to "ip".
+//config: Add support for rule commands to "ip".
//config:
//config:config FEATURE_IP_NEIGH
//config: bool "ip neighbor"
//config: default y
//config: depends on IP || IPNEIGH
//config: help
-//config: Add support for neighbor commands to "ip".
+//config: Add support for neighbor commands to "ip".
//config:
//config:config FEATURE_IP_RARE_PROTOCOLS
//config: bool "Support displaying rarely used link types"
//config: default n
//config: depends on IP || IPADDR || IPLINK || IPROUTE || IPTUNNEL || IPRULE || IPNEIGH
//config: help
-//config: If you are not going to use links of type "frad", "econet",
-//config: "bif" etc, you probably don't need to enable this.
-//config: Ethernet, wireless, infrared, ppp/slip, ip tunnelling
-//config: link types are supported without this option selected.
+//config: If you are not going to use links of type "frad", "econet",
+//config: "bif" etc, you probably don't need to enable this.
+//config: Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+//config: link types are supported without this option selected.
//applet:IF_IP(APPLET(ip, BB_DIR_SBIN, BB_SUID_DROP))
//applet:IF_IPADDR(APPLET(ipaddr, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/ipcalc.c b/networking/ipcalc.c
index 5975e6fd7..9888a6ff2 100644
--- a/networking/ipcalc.c
+++ b/networking/ipcalc.c
@@ -15,8 +15,8 @@
//config: bool "ipcalc (4.3 kb)"
//config: default y
//config: help
-//config: ipcalc takes an IP address and netmask and calculates the
-//config: resulting broadcast, network, and host range.
+//config: ipcalc takes an IP address and netmask and calculates the
+//config: resulting broadcast, network, and host range.
//config:
//config:config FEATURE_IPCALC_LONG_OPTIONS
//config: bool "Enable long options"
@@ -28,8 +28,8 @@
//config: default y
//config: depends on IPCALC
//config: help
-//config: Adds the options hostname, prefix and silent to the output of
-//config: "ipcalc".
+//config: Adds the options hostname, prefix and silent to the output of
+//config: "ipcalc".
//applet:IF_IPCALC(APPLET(ipcalc, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/networking/isrv_identd.c b/networking/isrv_identd.c
index 3384fddf2..133d62a65 100644
--- a/networking/isrv_identd.c
+++ b/networking/isrv_identd.c
@@ -11,8 +11,8 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: fakeidentd listens on the ident port and returns a predefined
-//config: fake value on any query.
+//config: fakeidentd listens on the ident port and returns a predefined
+//config: fake value on any query.
//applet:IF_FAKEIDENTD(APPLET(fakeidentd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/nameif.c b/networking/nameif.c
index e65aef417..31ee98a39 100644
--- a/networking/nameif.c
+++ b/networking/nameif.c
@@ -16,29 +16,29 @@
//config: select PLATFORM_LINUX
//config: select FEATURE_SYSLOG
//config: help
-//config: nameif is used to rename network interface by its MAC address.
-//config: Renamed interfaces MUST be in the down state.
-//config: It is possible to use a file (default: /etc/mactab)
-//config: with list of new interface names and MACs.
-//config: Maximum interface name length: IFNAMSIZ = 16
-//config: File fields are separated by space or tab.
-//config: File format:
-//config: # Comment
-//config: new_interface_name XX:XX:XX:XX:XX:XX
+//config: nameif is used to rename network interface by its MAC address.
+//config: Renamed interfaces MUST be in the down state.
+//config: It is possible to use a file (default: /etc/mactab)
+//config: with list of new interface names and MACs.
+//config: Maximum interface name length: IFNAMSIZ = 16
+//config: File fields are separated by space or tab.
+//config: File format:
+//config: # Comment
+//config: new_interface_name XX:XX:XX:XX:XX:XX
//config:
//config:config FEATURE_NAMEIF_EXTENDED
//config: bool "Extended nameif"
//config: default y
//config: depends on NAMEIF
//config: help
-//config: This extends the nameif syntax to support the bus_info, driver,
-//config: phyaddr selectors. The syntax is compatible to the normal nameif.
-//config: File format:
-//config: new_interface_name driver=asix bus=usb-0000:00:08.2-3
-//config: new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
-//config: new_interface_name phy_address=2 00:80:C8:38:91:B5
-//config: new_interface_name mac=00:80:C8:38:91:B5
-//config: new_interface_name 00:80:C8:38:91:B5
+//config: This extends the nameif syntax to support the bus_info, driver,
+//config: phyaddr selectors. The syntax is compatible to the normal nameif.
+//config: File format:
+//config: new_interface_name driver=asix bus=usb-0000:00:08.2-3
+//config: new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+//config: new_interface_name phy_address=2 00:80:C8:38:91:B5
+//config: new_interface_name mac=00:80:C8:38:91:B5
+//config: new_interface_name 00:80:C8:38:91:B5
//applet:IF_NAMEIF(APPLET(nameif, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/nbd-client.c b/networking/nbd-client.c
index ca71e4232..a5e25e6aa 100644
--- a/networking/nbd-client.c
+++ b/networking/nbd-client.c
@@ -15,7 +15,7 @@
//config: bool "nbd-client (4.6 kb)"
//config: default y
//config: help
-//config: Network block device client
+//config: Network block device client
#define NBD_SET_SOCK _IO(0xab, 0)
#define NBD_SET_BLKSIZE _IO(0xab, 1)
diff --git a/networking/nc.c b/networking/nc.c
index ac80d425a..a13d77a00 100644
--- a/networking/nc.c
+++ b/networking/nc.c
@@ -10,34 +10,34 @@
//config: bool "nc (11 kb)"
//config: default y
//config: help
-//config: A simple Unix utility which reads and writes data across network
-//config: connections.
+//config: A simple Unix utility which reads and writes data across network
+//config: connections.
//config:
//config:config NC_SERVER
//config: bool "Netcat server options (-l)"
//config: default y
//config: depends on NC
//config: help
-//config: Allow netcat to act as a server.
+//config: Allow netcat to act as a server.
//config:
//config:config NC_EXTRA
//config: bool "Netcat extensions (-eiw and -f FILE)"
//config: default y
//config: depends on NC
//config: help
-//config: Add -e (support for executing the rest of the command line after
-//config: making or receiving a successful connection), -i (delay interval for
-//config: lines sent), -w (timeout for initial connection).
+//config: Add -e (support for executing the rest of the command line after
+//config: making or receiving a successful connection), -i (delay interval for
+//config: lines sent), -w (timeout for initial connection).
//config:
//config:config NC_110_COMPAT
//config: bool "Netcat 1.10 compatibility (+2.5k)"
//config: default n # off specially for Rob
//config: depends on NC
//config: help
-//config: This option makes nc closely follow original nc-1.10.
-//config: The code is about 2.5k bigger. It enables
-//config: -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
-//config: busybox-specific extensions: -f FILE.
+//config: This option makes nc closely follow original nc-1.10.
+//config: The code is about 2.5k bigger. It enables
+//config: -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+//config: busybox-specific extensions: -f FILE.
//applet:IF_NC(APPLET(nc, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/netstat.c b/networking/netstat.c
index 003c2ba6f..33281e333 100644
--- a/networking/netstat.c
+++ b/networking/netstat.c
@@ -18,23 +18,23 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: netstat prints information about the Linux networking subsystem.
+//config: netstat prints information about the Linux networking subsystem.
//config:
//config:config FEATURE_NETSTAT_WIDE
//config: bool "Enable wide output"
//config: default y
//config: depends on NETSTAT
//config: help
-//config: Add support for wide columns. Useful when displaying IPv6 addresses
-//config: (-W option).
+//config: Add support for wide columns. Useful when displaying IPv6 addresses
+//config: (-W option).
//config:
//config:config FEATURE_NETSTAT_PRG
//config: bool "Enable PID/Program name output"
//config: default y
//config: depends on NETSTAT
//config: help
-//config: Add support for -p flag to print out PID and program name.
-//config: +700 bytes of code.
+//config: Add support for -p flag to print out PID and program name.
+//config: +700 bytes of code.
//applet:IF_NETSTAT(APPLET(netstat, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/networking/nslookup.c b/networking/nslookup.c
index 4e479730c..45c218e6c 100644
--- a/networking/nslookup.c
+++ b/networking/nslookup.c
@@ -14,7 +14,7 @@
//config: bool "nslookup (4.5 kb)"
//config: default y
//config: help
-//config: nslookup is a tool to query Internet name servers.
+//config: nslookup is a tool to query Internet name servers.
//applet:IF_NSLOOKUP(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/ntpd.c b/networking/ntpd.c
index fdcb27fb2..f21f9513d 100644
--- a/networking/ntpd.c
+++ b/networking/ntpd.c
@@ -45,23 +45,23 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The NTP client/server daemon.
+//config: The NTP client/server daemon.
//config:
//config:config FEATURE_NTPD_SERVER
//config: bool "Make ntpd usable as a NTP server"
//config: default y
//config: depends on NTPD
//config: help
-//config: Make ntpd usable as a NTP server. If you disable this option
-//config: ntpd will be usable only as a NTP client.
+//config: Make ntpd usable as a NTP server. If you disable this option
+//config: ntpd will be usable only as a NTP client.
//config:
//config:config FEATURE_NTPD_CONF
//config: bool "Make ntpd understand /etc/ntp.conf"
//config: default y
//config: depends on NTPD
//config: help
-//config: Make ntpd look in /etc/ntp.conf for peers. Only "server address"
-//config: is supported.
+//config: Make ntpd look in /etc/ntp.conf for peers. Only "server address"
+//config: is supported.
//applet:IF_NTPD(APPLET(ntpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/ping.c b/networking/ping.c
index 31a085984..cdfb297e9 100644
--- a/networking/ping.c
+++ b/networking/ping.c
@@ -51,23 +51,23 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
-//config: elicit an ICMP ECHO_RESPONSE from a host or gateway.
+//config: ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+//config: elicit an ICMP ECHO_RESPONSE from a host or gateway.
//config:
//config:config PING6
//config: bool "ping6 (10 kb)"
//config: default y
//config: depends on FEATURE_IPV6
//config: help
-//config: Alias to "ping -6".
+//config: Alias to "ping -6".
//config:
//config:config FEATURE_FANCY_PING
//config: bool "Enable fancy ping output"
//config: default y
//config: depends on PING || PING6
//config: help
-//config: Make the output from the ping applet include statistics, and at the
-//config: same time provide full support for ICMP packets.
+//config: Make the output from the ping applet include statistics, and at the
+//config: same time provide full support for ICMP packets.
/* Needs socket(AF_INET, SOCK_RAW, IPPROTO_ICMP), therefore BB_SUID_MAYBE: */
//applet:IF_PING(APPLET(ping, BB_DIR_BIN, BB_SUID_MAYBE))
diff --git a/networking/pscan.c b/networking/pscan.c
index 2859ff30f..17985d2c8 100644
--- a/networking/pscan.c
+++ b/networking/pscan.c
@@ -9,7 +9,7 @@
//config: bool "pscan (6.6 kb)"
//config: default y
//config: help
-//config: Simple network port scanner.
+//config: Simple network port scanner.
//applet:IF_PSCAN(APPLET(pscan, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/route.c b/networking/route.c
index 38b95b2f2..32789eecc 100644
--- a/networking/route.c
+++ b/networking/route.c
@@ -29,7 +29,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Route displays or manipulates the kernel's IP routing tables.
+//config: Route displays or manipulates the kernel's IP routing tables.
//applet:IF_ROUTE(APPLET(route, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/slattach.c b/networking/slattach.c
index 3be5bd27e..71b5bf427 100644
--- a/networking/slattach.c
+++ b/networking/slattach.c
@@ -17,8 +17,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: slattach is a small utility to attach network interfaces to serial
-//config: lines.
+//config: slattach is a small utility to attach network interfaces to serial
+//config: lines.
//applet:IF_SLATTACH(APPLET(slattach, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/ssl_client.c b/networking/ssl_client.c
index 6cbdafbfa..d479846d7 100644
--- a/networking/ssl_client.c
+++ b/networking/ssl_client.c
@@ -8,7 +8,7 @@
//config: default y
//config: select TLS
//config: help
-//config: This tool pipes data to/from a socket, TLS-encrypting it.
+//config: This tool pipes data to/from a socket, TLS-encrypting it.
//applet:IF_SSL_CLIENT(APPLET(ssl_client, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/tcpudp.c b/networking/tcpudp.c
index b970c4723..270325164 100644
--- a/networking/tcpudp.c
+++ b/networking/tcpudp.c
@@ -32,15 +32,15 @@
//config: bool "tcpsvd (13 kb)"
//config: default y
//config: help
-//config: tcpsvd listens on a TCP port and runs a program for each new
-//config: connection.
+//config: tcpsvd listens on a TCP port and runs a program for each new
+//config: connection.
//config:
//config:config UDPSVD
//config: bool "udpsvd (13 kb)"
//config: default y
//config: help
-//config: udpsvd listens on an UDP port and runs a program for each new
-//config: connection.
+//config: udpsvd listens on an UDP port and runs a program for each new
+//config: connection.
//applet:IF_TCPSVD(APPLET_ODDNAME(tcpsvd, tcpudpsvd, BB_DIR_USR_BIN, BB_SUID_DROP, tcpsvd))
//applet:IF_UDPSVD(APPLET_ODDNAME(udpsvd, tcpudpsvd, BB_DIR_USR_BIN, BB_SUID_DROP, udpsvd))
diff --git a/networking/telnet.c b/networking/telnet.c
index 1c4811d5d..9f191f7ad 100644
--- a/networking/telnet.c
+++ b/networking/telnet.c
@@ -24,27 +24,27 @@
//config: bool "telnet (8.7 kb)"
//config: default y
//config: help
-//config: Telnet is an interface to the TELNET protocol, but is also commonly
-//config: used to test other simple protocols.
+//config: Telnet is an interface to the TELNET protocol, but is also commonly
+//config: used to test other simple protocols.
//config:
//config:config FEATURE_TELNET_TTYPE
//config: bool "Pass TERM type to remote host"
//config: default y
//config: depends on TELNET
//config: help
-//config: Setting this option will forward the TERM environment variable to the
-//config: remote host you are connecting to. This is useful to make sure that
-//config: things like ANSI colors and other control sequences behave.
+//config: Setting this option will forward the TERM environment variable to the
+//config: remote host you are connecting to. This is useful to make sure that
+//config: things like ANSI colors and other control sequences behave.
//config:
//config:config FEATURE_TELNET_AUTOLOGIN
//config: bool "Pass USER type to remote host"
//config: default y
//config: depends on TELNET
//config: help
-//config: Setting this option will forward the USER environment variable to the
-//config: remote host you are connecting to. This is useful when you need to
-//config: log into a machine without telling the username (autologin). This
-//config: option enables `-a' and `-l USER' arguments.
+//config: Setting this option will forward the USER environment variable to the
+//config: remote host you are connecting to. This is useful when you need to
+//config: log into a machine without telling the username (autologin). This
+//config: option enables `-a' and `-l USER' arguments.
//config:
//config:config FEATURE_TELNET_WIDTH
//config: bool "Enable window size autodetection"
diff --git a/networking/telnetd.c b/networking/telnetd.c
index b617c2889..6e12de07a 100644
--- a/networking/telnetd.c
+++ b/networking/telnetd.c
@@ -25,69 +25,69 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: A daemon for the TELNET protocol, allowing you to log onto the host
-//config: running the daemon. Please keep in mind that the TELNET protocol
-//config: sends passwords in plain text. If you can't afford the space for an
-//config: SSH daemon and you trust your network, you may say 'y' here. As a
-//config: more secure alternative, you should seriously consider installing the
-//config: very small Dropbear SSH daemon instead:
+//config: A daemon for the TELNET protocol, allowing you to log onto the host
+//config: running the daemon. Please keep in mind that the TELNET protocol
+//config: sends passwords in plain text. If you can't afford the space for an
+//config: SSH daemon and you trust your network, you may say 'y' here. As a
+//config: more secure alternative, you should seriously consider installing the
+//config: very small Dropbear SSH daemon instead:
//config: http://matt.ucc.asn.au/dropbear/dropbear.html
//config:
-//config: Note that for busybox telnetd to work you need several things:
-//config: First of all, your kernel needs:
+//config: Note that for busybox telnetd to work you need several things:
+//config: First of all, your kernel needs:
//config: CONFIG_UNIX98_PTYS=y
//config:
-//config: Next, you need a /dev/pts directory on your root filesystem:
+//config: Next, you need a /dev/pts directory on your root filesystem:
//config:
//config: $ ls -ld /dev/pts
//config: drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
//config:
-//config: Next you need the pseudo terminal master multiplexer /dev/ptmx:
+//config: Next you need the pseudo terminal master multiplexer /dev/ptmx:
//config:
//config: $ ls -la /dev/ptmx
//config: crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
//config:
-//config: Any /dev/ttyp[0-9]* files you may have can be removed.
-//config: Next, you need to mount the devpts filesystem on /dev/pts using:
+//config: Any /dev/ttyp[0-9]* files you may have can be removed.
+//config: Next, you need to mount the devpts filesystem on /dev/pts using:
//config:
//config: mount -t devpts devpts /dev/pts
//config:
-//config: You need to be sure that busybox has LOGIN and
-//config: FEATURE_SUID enabled. And finally, you should make
-//config: certain that Busybox has been installed setuid root:
+//config: You need to be sure that busybox has LOGIN and
+//config: FEATURE_SUID enabled. And finally, you should make
+//config: certain that Busybox has been installed setuid root:
//config:
//config: chown root.root /bin/busybox
//config: chmod 4755 /bin/busybox
//config:
-//config: with all that done, telnetd _should_ work....
+//config: with all that done, telnetd _should_ work....
//config:
//config:config FEATURE_TELNETD_STANDALONE
//config: bool "Support standalone telnetd (not inetd only)"
//config: default y
//config: depends on TELNETD
//config: help
-//config: Selecting this will make telnetd able to run standalone.
+//config: Selecting this will make telnetd able to run standalone.
//config:
//config:config FEATURE_TELNETD_INETD_WAIT
//config: bool "Support -w SEC option (inetd wait mode)"
//config: default y
//config: depends on FEATURE_TELNETD_STANDALONE
//config: help
-//config: This option allows you to run telnetd in "inet wait" mode.
-//config: Example inetd.conf line (note "wait", not usual "nowait"):
+//config: This option allows you to run telnetd in "inet wait" mode.
+//config: Example inetd.conf line (note "wait", not usual "nowait"):
//config:
-//config: telnet stream tcp wait root /bin/telnetd telnetd -w10
+//config: telnet stream tcp wait root /bin/telnetd telnetd -w10
//config:
-//config: In this example, inetd passes _listening_ socket_ as fd 0
-//config: to telnetd when connection appears.
-//config: telnetd will wait for connections until all existing
-//config: connections are closed, and no new connections
-//config: appear during 10 seconds. Then it exits, and inetd continues
-//config: to listen for new connections.
+//config: In this example, inetd passes _listening_ socket_ as fd 0
+//config: to telnetd when connection appears.
+//config: telnetd will wait for connections until all existing
+//config: connections are closed, and no new connections
+//config: appear during 10 seconds. Then it exits, and inetd continues
+//config: to listen for new connections.
//config:
-//config: This option is rarely used. "tcp nowait" is much more usual
-//config: way of running tcp services, including telnetd.
-//config: You most probably want to say N here.
+//config: This option is rarely used. "tcp nowait" is much more usual
+//config: way of running tcp services, including telnetd.
+//config: You most probably want to say N here.
//applet:IF_TELNETD(APPLET(telnetd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/networking/tftp.c b/networking/tftp.c
index 3fe1fcb82..947e65169 100644
--- a/networking/tftp.c
+++ b/networking/tftp.c
@@ -22,19 +22,19 @@
//config: bool "tftp (12 kb)"
//config: default y
//config: help
-//config: This enables the Trivial File Transfer Protocol client program. TFTP
-//config: is usually used for simple, small transfers such as a root image
-//config: for a network-enabled bootloader.
+//config: This enables the Trivial File Transfer Protocol client program. TFTP
+//config: is usually used for simple, small transfers such as a root image
+//config: for a network-enabled bootloader.
//config:
//config:config TFTPD
//config: bool "tftpd (10 kb)"
//config: default y
//config: help
-//config: This enables the Trivial File Transfer Protocol server program.
-//config: It expects that stdin is a datagram socket and a packet
-//config: is already pending on it. It will exit after one transfer.
-//config: In other words: it should be run from inetd in nowait mode,
-//config: or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+//config: This enables the Trivial File Transfer Protocol server program.
+//config: It expects that stdin is a datagram socket and a packet
+//config: is already pending on it. It will exit after one transfer.
+//config: In other words: it should be run from inetd in nowait mode,
+//config: or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
//config:
//config:comment "Common options for tftp/tftpd"
//config: depends on TFTP || TFTPD
@@ -44,29 +44,29 @@
//config: default y
//config: depends on TFTP || TFTPD
//config: help
-//config: Add support for the GET command within the TFTP client. This allows
-//config: a client to retrieve a file from a TFTP server.
-//config: Also enable upload support in tftpd, if tftpd is selected.
+//config: Add support for the GET command within the TFTP client. This allows
+//config: a client to retrieve a file from a TFTP server.
+//config: Also enable upload support in tftpd, if tftpd is selected.
//config:
-//config: Note: this option does _not_ make tftpd capable of download
-//config: (the usual operation people need from it)!
+//config: Note: this option does _not_ make tftpd capable of download
+//config: (the usual operation people need from it)!
//config:
//config:config FEATURE_TFTP_PUT
//config: bool "Enable 'tftp put' and/or tftpd download code"
//config: default y
//config: depends on TFTP || TFTPD
//config: help
-//config: Add support for the PUT command within the TFTP client. This allows
-//config: a client to transfer a file to a TFTP server.
-//config: Also enable download support in tftpd, if tftpd is selected.
+//config: Add support for the PUT command within the TFTP client. This allows
+//config: a client to transfer a file to a TFTP server.
+//config: Also enable download support in tftpd, if tftpd is selected.
//config:
//config:config FEATURE_TFTP_BLOCKSIZE
//config: bool "Enable 'blksize' and 'tsize' protocol options"
//config: default y
//config: depends on TFTP || TFTPD
//config: help
-//config: Allow tftp to specify block size, and tftpd to understand
-//config: "blksize" and "tsize" options.
+//config: Allow tftp to specify block size, and tftpd to understand
+//config: "blksize" and "tsize" options.
//config:
//config:config FEATURE_TFTP_PROGRESS_BAR
//config: bool "Enable progress bar"
@@ -78,8 +78,8 @@
//config: default n
//config: depends on TFTP || TFTPD
//config: help
-//config: Make tftp[d] print debugging messages on stderr.
-//config: This is useful if you are diagnosing a bug in tftp[d].
+//config: Make tftp[d] print debugging messages on stderr.
+//config: This is useful if you are diagnosing a bug in tftp[d].
//applet:#if ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT
//applet:IF_TFTP(APPLET(tftp, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/traceroute.c b/networking/traceroute.c
index 408f43c55..a958a2c6c 100644
--- a/networking/traceroute.c
+++ b/networking/traceroute.c
@@ -214,22 +214,22 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Utility to trace the route of IP packets.
+//config: Utility to trace the route of IP packets.
//config:
//config:config TRACEROUTE6
//config: bool "traceroute6 (12 kb)"
//config: default y
//config: depends on FEATURE_IPV6
//config: help
-//config: Utility to trace the route of IPv6 packets.
+//config: Utility to trace the route of IPv6 packets.
//config:
//config:config FEATURE_TRACEROUTE_VERBOSE
//config: bool "Enable verbose output"
//config: default y
//config: depends on TRACEROUTE || TRACEROUTE6
//config: help
-//config: Add some verbosity to traceroute. This includes among other things
-//config: hostnames and ICMP response types.
+//config: Add some verbosity to traceroute. This includes among other things
+//config: hostnames and ICMP response types.
//config:
//config:config FEATURE_TRACEROUTE_USE_ICMP
//config: bool "Enable -I option (use ICMP instead of UDP)"
diff --git a/networking/tunctl.c b/networking/tunctl.c
index 97ee1961b..0a26ff7fb 100644
--- a/networking/tunctl.c
+++ b/networking/tunctl.c
@@ -14,15 +14,15 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: tunctl creates or deletes tun devices.
+//config: tunctl creates or deletes tun devices.
//config:
//config:config FEATURE_TUNCTL_UG
//config: bool "Support owner:group assignment"
//config: default y
//config: depends on TUNCTL
//config: help
-//config: Allow to specify owner and group of newly created interface.
-//config: 340 bytes of pure bloat. Say no here.
+//config: Allow to specify owner and group of newly created interface.
+//config: 340 bytes of pure bloat. Say no here.
//applet:IF_TUNCTL(APPLET(tunctl, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src
index 43f3676e4..af2fe1835 100644
--- a/networking/udhcp/Config.src
+++ b/networking/udhcp/Config.src
@@ -10,105 +10,105 @@ config UDHCPD
default y
select PLATFORM_LINUX
help
- udhcpd is a DHCP server geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpd is a DHCP server geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
config FEATURE_UDHCPD_WRITE_LEASES_EARLY
bool "Rewrite the lease file at every new acknowledge"
default y
depends on UDHCPD
help
- If selected, udhcpd will write a new file with leases every
- time a new lease has been accepted, thus eliminating the need
- to send SIGUSR1 for the initial writing or updating. Any timed
- rewriting remains undisturbed.
+ If selected, udhcpd will write a new file with leases every
+ time a new lease has been accepted, thus eliminating the need
+ to send SIGUSR1 for the initial writing or updating. Any timed
+ rewriting remains undisturbed.
config FEATURE_UDHCPD_BASE_IP_ON_MAC
bool "Select IP address based on client MAC"
default n
depends on UDHCPD
help
- If selected, udhcpd will base its selection of IP address to offer
- on the client's hardware address. Otherwise udhcpd uses the next
- consecutive free address.
+ If selected, udhcpd will base its selection of IP address to offer
+ on the client's hardware address. Otherwise udhcpd uses the next
+ consecutive free address.
- This reduces the frequency of IP address changes for clients
- which let their lease expire, and makes consecutive DHCPOFFERS
- for the same client to (almost always) contain the same
- IP address.
+ This reduces the frequency of IP address changes for clients
+ which let their lease expire, and makes consecutive DHCPOFFERS
+ for the same client to (almost always) contain the same
+ IP address.
config DHCPD_LEASES_FILE
string "Absolute path to lease file"
default "/var/lib/misc/udhcpd.leases"
depends on UDHCPD
help
- udhcpd stores addresses in a lease file. This is the absolute path
- of the file. Normally it is safe to leave it untouched.
+ udhcpd stores addresses in a lease file. This is the absolute path
+ of the file. Normally it is safe to leave it untouched.
config DUMPLEASES
bool "dumpleases (6.4 kb)"
default y
help
- dumpleases displays the leases written out by the udhcpd.
- Lease times are stored in the file by time remaining in lease, or
- by the absolute time that it expires in seconds from epoch.
+ dumpleases displays the leases written out by the udhcpd.
+ Lease times are stored in the file by time remaining in lease, or
+ by the absolute time that it expires in seconds from epoch.
config DHCPRELAY
bool "dhcprelay (5.8 kb)"
default y
help
- dhcprelay listens for dhcp requests on one or more interfaces
- and forwards these requests to a different interface or dhcp
- server.
+ dhcprelay listens for dhcp requests on one or more interfaces
+ and forwards these requests to a different interface or dhcp
+ server.
config UDHCPC
bool "udhcpc (DHCP client)"
default y
select PLATFORM_LINUX
help
- udhcpc is a DHCP client geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpc is a DHCP client geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
- The udhcp client negotiates a lease with the DHCP server and
- runs a script when a lease is obtained or lost.
+ The udhcp client negotiates a lease with the DHCP server and
+ runs a script when a lease is obtained or lost.
config FEATURE_UDHCPC_ARPING
bool "Verify that the offered address is free, using ARP ping"
default y
depends on UDHCPC
help
- If selected, udhcpc will send ARP probes and make sure
- the offered address is really not in use by anyone. The client
- will DHCPDECLINE the offer if the address is in use,
- and restart the discover process.
+ If selected, udhcpc will send ARP probes and make sure
+ the offered address is really not in use by anyone. The client
+ will DHCPDECLINE the offer if the address is in use,
+ and restart the discover process.
config FEATURE_UDHCPC_SANITIZEOPT
bool "Do not pass malformed host and domain names"
default y
depends on UDHCPC
help
- If selected, udhcpc will check some options (such as option 12 -
- hostname) and if they don't look like valid hostnames
- (for example, if they start with dash or contain spaces),
- they will be replaced with string "bad" when exporting
- to the environment.
+ If selected, udhcpc will check some options (such as option 12 -
+ hostname) and if they don't look like valid hostnames
+ (for example, if they start with dash or contain spaces),
+ they will be replaced with string "bad" when exporting
+ to the environment.
config UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"
default "/usr/share/udhcpc/default.script"
depends on UDHCPC
help
- This script is called after udhcpc receives an answer. See
- examples/udhcp for a working example. Normally it is safe
- to leave this untouched.
+ This script is called after udhcpc receives an answer. See
+ examples/udhcp for a working example. Normally it is safe
+ to leave this untouched.
config FEATURE_UDHCP_PORT
bool "Enable '-P port' option for udhcpd and udhcpc"
default n
depends on UDHCPD || UDHCPC
help
- At the cost of ~300 bytes, enables -P port option.
- This feature is typically not needed.
+ At the cost of ~300 bytes, enables -P port option.
+ This feature is typically not needed.
config UDHCP_DEBUG
int "Maximum verbosity level for udhcp applets (0..9)"
@@ -116,28 +116,28 @@ config UDHCP_DEBUG
range 0 9
depends on UDHCPD || UDHCPC || DHCPRELAY
help
- Verbosity can be increased with multiple -v options.
- This option controls how high it can be cranked up.
+ Verbosity can be increased with multiple -v options.
+ This option controls how high it can be cranked up.
- Bigger values result in bigger code. Levels above 1
- are very verbose and useful for debugging only.
+ Bigger values result in bigger code. Levels above 1
+ are very verbose and useful for debugging only.
config FEATURE_UDHCP_RFC3397
bool "Support RFC3397 domain search (experimental)"
default y
depends on UDHCPD || UDHCPC
help
- If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC 3397,
- and SIP servers option 120, specified in RFC 3361.
+ If selected, both client and server will support passing of domain
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
config FEATURE_UDHCP_8021Q
bool "Support 802.1Q VLAN parameters"
default y
depends on UDHCPD || UDHCPC
help
- If selected, both client and server will support passing of VLAN
- ID and priority via options 132 and 133 as per 802.1Q.
+ If selected, both client and server will support passing of VLAN
+ ID and priority via options 132 and 133 as per 802.1Q.
config UDHCPC_SLACK_FOR_BUGGY_SERVERS
int "DHCP options slack buffer size"
@@ -145,19 +145,19 @@ config UDHCPC_SLACK_FOR_BUGGY_SERVERS
range 0 924
depends on UDHCPD || UDHCPC
help
- Some buggy DHCP servers send DHCP offer packets with option
- field larger than we expect (which might also be considered a
- buffer overflow attempt). These packets are normally discarded.
- If circumstances beyond your control force you to support such
- servers, this may help. The upper limit (924) makes dhcpc accept
- even 1500 byte packets (maximum-sized ethernet packets).
-
- This option does not make dhcp[cd] emit non-standard
- sized packets.
-
- Known buggy DHCP servers:
- 3Com OfficeConnect Remote 812 ADSL Router:
- seems to confuse maximum allowed UDP packet size with
- maximum size of entire IP packet, and sends packets which are
- 28 bytes too large.
- Seednet (ISP) VDSL: sends packets 2 bytes too large.
+ Some buggy DHCP servers send DHCP offer packets with option
+ field larger than we expect (which might also be considered a
+ buffer overflow attempt). These packets are normally discarded.
+ If circumstances beyond your control force you to support such
+ servers, this may help. The upper limit (924) makes dhcpc accept
+ even 1500 byte packets (maximum-sized ethernet packets).
+
+ This option does not make dhcp[cd] emit non-standard
+ sized packets.
+
+ Known buggy DHCP servers:
+ 3Com OfficeConnect Remote 812 ADSL Router:
+ seems to confuse maximum allowed UDP packet size with
+ maximum size of entire IP packet, and sends packets
+ which are 28 bytes too large.
+ Seednet (ISP) VDSL: sends packets 2 bytes too large.
diff --git a/networking/udhcp/d6_dhcpc.c b/networking/udhcp/d6_dhcpc.c
index f6d3fb98b..ebf793438 100644
--- a/networking/udhcp/d6_dhcpc.c
+++ b/networking/udhcp/d6_dhcpc.c
@@ -14,31 +14,31 @@
//config: default n # not yet ready
//config: depends on FEATURE_IPV6
//config: help
-//config: udhcpc6 is a DHCPv6 client
+//config: udhcpc6 is a DHCPv6 client
//config:
//config:config FEATURE_UDHCPC6_RFC3646
//config: bool "Support RFC 3646 (DNS server and search list)"
//config: default y
//config: depends on UDHCPC6
//config: help
-//config: List of DNS servers and domain search list can be requested with
-//config: "-O dns" and "-O search". If server gives these values,
-//config: they will be set in environment variables "dns" and "search".
+//config: List of DNS servers and domain search list can be requested with
+//config: "-O dns" and "-O search". If server gives these values,
+//config: they will be set in environment variables "dns" and "search".
//config:
//config:config FEATURE_UDHCPC6_RFC4704
//config: bool "Support RFC 4704 (Client FQDN)"
//config: default y
//config: depends on UDHCPC6
//config: help
-//config: You can request FQDN to be given by server using "-O fqdn".
+//config: You can request FQDN to be given by server using "-O fqdn".
//config:
//config:config FEATURE_UDHCPC6_RFC4833
//config: bool "Support RFC 4833 (Timezones)"
//config: default y
//config: depends on UDHCPC6
//config: help
-//config: You can request POSIX timezone with "-O tz" and timezone name
-//config: with "-O timezone".
+//config: You can request POSIX timezone with "-O tz" and timezone name
+//config: with "-O timezone".
//applet:IF_UDHCPC6(APPLET(udhcpc6, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/vconfig.c b/networking/vconfig.c
index 9efb79c16..e6e2872bf 100644
--- a/networking/vconfig.c
+++ b/networking/vconfig.c
@@ -14,7 +14,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Creates, removes, and configures VLAN interfaces
+//config: Creates, removes, and configures VLAN interfaces
//applet:IF_VCONFIG(APPLET(vconfig, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/networking/wget.c b/networking/wget.c
index 6d78dd56f..e47c9a51b 100644
--- a/networking/wget.c
+++ b/networking/wget.c
@@ -13,8 +13,8 @@
//config: bool "wget (35 kb)"
//config: default y
//config: help
-//config: wget is a utility for non-interactive download of files from HTTP
-//config: and FTP servers.
+//config: wget is a utility for non-interactive download of files from HTTP
+//config: and FTP servers.
//config:
//config:config FEATURE_WGET_LONG_OPTIONS
//config: bool "Enable long options"
@@ -31,21 +31,21 @@
//config: default y
//config: depends on WGET
//config: help
-//config: Support authenticated HTTP transfers.
+//config: Support authenticated HTTP transfers.
//config:
//config:config FEATURE_WGET_TIMEOUT
//config: bool "Enable timeout option -T SEC"
//config: default y
//config: depends on WGET
//config: help
-//config: Supports network read and connect timeouts for wget,
-//config: so that wget will give up and timeout, through the -T
-//config: command line option.
+//config: Supports network read and connect timeouts for wget,
+//config: so that wget will give up and timeout, through the -T
+//config: command line option.
//config:
-//config: Currently only connect and network data read timeout are
-//config: supported (i.e., timeout is not applied to the DNS query). When
-//config: FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
-//config: will work in addition to -T.
+//config: Currently only connect and network data read timeout are
+//config: supported (i.e., timeout is not applied to the DNS query). When
+//config: FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+//config: will work in addition to -T.
//config:
//config:config FEATURE_WGET_HTTPS
//config: bool "Support HTTPS using internal TLS code"
@@ -53,68 +53,68 @@
//config: depends on WGET
//config: select TLS
//config: help
-//config: wget will use internal TLS code to connect to https:// URLs.
-//config: Note:
-//config: On NOMMU machines, ssl_helper applet should be available
-//config: in the $PATH for this to work. Make sure to select that applet.
+//config: wget will use internal TLS code to connect to https:// URLs.
+//config: Note:
+//config: On NOMMU machines, ssl_helper applet should be available
+//config: in the $PATH for this to work. Make sure to select that applet.
//config:
-//config: Note: currently, TLS code only makes TLS I/O work, it
-//config: does *not* check that the peer is who it claims to be, etc.
-//config: IOW: it uses peer-supplied public keys to establish encryption
-//config: and signing keys, then encrypts and signs outgoing data and
-//config: decrypts incoming data.
-//config: It does not check signature hashes on the incoming data:
-//config: this means that attackers manipulating TCP packets can
-//config: send altered data and we unknowingly receive garbage.
-//config: (This check might be relatively easy to add).
-//config: It does not check public key's certificate:
-//config: this means that the peer may be an attacker impersonating
-//config: the server we think we are talking to.
+//config: Note: currently, TLS code only makes TLS I/O work, it
+//config: does *not* check that the peer is who it claims to be, etc.
+//config: IOW: it uses peer-supplied public keys to establish encryption
+//config: and signing keys, then encrypts and signs outgoing data and
+//config: decrypts incoming data.
+//config: It does not check signature hashes on the incoming data:
+//config: this means that attackers manipulating TCP packets can
+//config: send altered data and we unknowingly receive garbage.
+//config: (This check might be relatively easy to add).
+//config: It does not check public key's certificate:
+//config: this means that the peer may be an attacker impersonating
+//config: the server we think we are talking to.
//config:
-//config: If you think this is unacceptable, consider this. As more and more
-//config: servers switch to HTTPS-only operation, without such "crippled"
-//config: TLS code it is *impossible* to simply download a kernel source
-//config: from kernel.org. Which can in real world translate into
-//config: "my small automatic tooling to build cross-compilers from sources
-//config: no longer works, I need to additionally keep a local copy
-//config: of ~4 megabyte source tarball of a SSL library and ~2 megabyte
-//config: source of wget, need to compile and built both before I can
-//config: download anything. All this despite the fact that the build
-//config: is done in a QEMU sandbox on a machine with absolutely nothing
-//config: worth stealing, so I don't care if someone would go to a lot
-//config: of trouble to intercept my HTTPS download to send me an altered
-//config: kernel tarball".
+//config: If you think this is unacceptable, consider this. As more and more
+//config: servers switch to HTTPS-only operation, without such "crippled"
+//config: TLS code it is *impossible* to simply download a kernel source
+//config: from kernel.org. Which can in real world translate into
+//config: "my small automatic tooling to build cross-compilers from sources
+//config: no longer works, I need to additionally keep a local copy
+//config: of ~4 megabyte source tarball of a SSL library and ~2 megabyte
+//config: source of wget, need to compile and built both before I can
+//config: download anything. All this despite the fact that the build
+//config: is done in a QEMU sandbox on a machine with absolutely nothing
+//config: worth stealing, so I don't care if someone would go to a lot
+//config: of trouble to intercept my HTTPS download to send me an altered
+//config: kernel tarball".
//config:
-//config: If you still think this is unacceptable, send patches.
+//config: If you still think this is unacceptable, send patches.
//config:
-//config: If you still think this is unacceptable, do not want to send
-//config: patches, but do want to waste bandwidth expaining how wrong
-//config: it is, you will be ignored.
+//config: If you still think this is unacceptable, do not want to send
+//config: patches, but do want to waste bandwidth expaining how wrong
+//config: it is, you will be ignored.
//config:
//config:config FEATURE_WGET_OPENSSL
//config: bool "Try to connect to HTTPS using openssl"
//config: default y
//config: depends on WGET
//config: help
-//config: Try to use openssl to handle HTTPS.
+//config: Try to use openssl to handle HTTPS.
//config:
-//config: OpenSSL has a simple SSL client for debug purposes.
-//config: If you select this option, wget will effectively run:
-//config: "openssl s_client -quiet -connect hostname:443
-//config: -servername hostname 2>/dev/null" and pipe its data
-//config: through it. -servername is not used if hostname is numeric.
-//config: Note inconvenient API: host resolution is done twice,
-//config: and there is no guarantee openssl's idea of IPv6 address
-//config: format is the same as ours.
-//config: Another problem is that s_client prints debug information
-//config: to stderr, and it needs to be suppressed. This means
-//config: all error messages get suppressed too.
-//config: openssl is also a big binary, often dynamically linked
-//config: against ~15 libraries.
+//config: OpenSSL has a simple SSL client for debug purposes.
+//config: If you select this option, wget will effectively run:
+//config: "openssl s_client -quiet -connect hostname:443
+//config: -servername hostname 2>/dev/null" and pipe its data
+//config: through it. -servername is not used if hostname is numeric.
+//config: Note inconvenient API: host resolution is done twice,
+//config: and there is no guarantee openssl's idea of IPv6 address
+//config: format is the same as ours.
+//config: Another problem is that s_client prints debug information
+//config: to stderr, and it needs to be suppressed. This means
+//config: all error messages get suppressed too.
+//config: openssl is also a big binary, often dynamically linked
+//config: against ~15 libraries.
//config:
-//config: If openssl can't be executed, internal TLS code will be used
-//config: (if you enabled it); if openssl can be executed but fails later,
-//config: wget can't detect this, and download will fail.
+//config: If openssl can't be executed, internal TLS code will be used
+//config: (if you enabled it); if openssl can be executed but fails later,
+//config: wget can't detect this, and download will fail.
//applet:IF_WGET(APPLET(wget, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/whois.c b/networking/whois.c
index ee5a6011f..0cb7e5411 100644
--- a/networking/whois.c
+++ b/networking/whois.c
@@ -14,7 +14,7 @@
//config: bool "whois (6.6 kb)"
//config: default y
//config: help
-//config: whois is a client for the whois directory service
+//config: whois is a client for the whois directory service
//applet:IF_WHOIS(APPLET(whois, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/zcip.c b/networking/zcip.c
index 20543700a..232165efa 100644
--- a/networking/zcip.c
+++ b/networking/zcip.c
@@ -20,12 +20,12 @@
//config: select PLATFORM_LINUX
//config: select FEATURE_SYSLOG
//config: help
-//config: ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
-//config: It's a daemon that allocates and defends a dynamically assigned
-//config: address on the 169.254/16 network, requiring no system administrator.
+//config: ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+//config: It's a daemon that allocates and defends a dynamically assigned
+//config: address on the 169.254/16 network, requiring no system administrator.
//config:
-//config: See http://www.zeroconf.org for further details, and "zcip.script"
-//config: in the busybox examples.
+//config: See http://www.zeroconf.org for further details, and "zcip.script"
+//config: in the busybox examples.
//applet:IF_ZCIP(APPLET(zcip, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/printutils/lpd.c b/printutils/lpd.c
index 2be485a69..3fdba5d2b 100644
--- a/printutils/lpd.c
+++ b/printutils/lpd.c
@@ -73,7 +73,7 @@
//config: bool "lpd (5.3 kb)"
//config: default y
//config: help
-//config: lpd is a print spooling daemon.
+//config: lpd is a print spooling daemon.
//applet:IF_LPD(APPLET(lpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/printutils/lpr.c b/printutils/lpr.c
index 23bf8cdaf..808ecb5dc 100644
--- a/printutils/lpr.c
+++ b/printutils/lpr.c
@@ -15,13 +15,13 @@
//config: bool "lpr (10 kb)"
//config: default y
//config: help
-//config: lpr sends files (or standard input) to a print spooling daemon.
+//config: lpr sends files (or standard input) to a print spooling daemon.
//config:
//config:config LPQ
//config: bool "lpq (10 kb)"
//config: default y
//config: help
-//config: lpq is a print spool queue examination and manipulation program.
+//config: lpq is a print spool queue examination and manipulation program.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_LPQ(APPLET_ODDNAME(lpq, lpqr, BB_DIR_USR_BIN, BB_SUID_DROP, lpq))
diff --git a/procps/Config.src b/procps/Config.src
index 35fef2eda..515d79938 100644
--- a/procps/Config.src
+++ b/procps/Config.src
@@ -12,7 +12,7 @@ config FEATURE_SHOW_THREADS
default y
depends on PS || TOP || PSTREE
help
- Enables the ps -T option, showing of threads in pstree,
- and 'h' command in top.
+ Enables the ps -T option, showing of threads in pstree,
+ and 'h' command in top.
endmenu
diff --git a/procps/free.c b/procps/free.c
index 497bf1911..618664e08 100644
--- a/procps/free.c
+++ b/procps/free.c
@@ -11,9 +11,9 @@
//config: default y
//config: select PLATFORM_LINUX #sysinfo()
//config: help
-//config: free displays the total amount of free and used physical and swap
-//config: memory in the system, as well as the buffers used by the kernel.
-//config: The shared memory column should be ignored; it is obsolete.
+//config: free displays the total amount of free and used physical and swap
+//config: memory in the system, as well as the buffers used by the kernel.
+//config: The shared memory column should be ignored; it is obsolete.
//applet:IF_FREE(APPLET(free, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/fuser.c b/procps/fuser.c
index 463d8800c..2585a4203 100644
--- a/procps/fuser.c
+++ b/procps/fuser.c
@@ -10,9 +10,9 @@
//config: bool "fuser (7 kb)"
//config: default y
//config: help
-//config: fuser lists all PIDs (Process IDs) that currently have a given
-//config: file open. fuser can also list all PIDs that have a given network
-//config: (TCP or UDP) port open.
+//config: fuser lists all PIDs (Process IDs) that currently have a given
+//config: file open. fuser can also list all PIDs that have a given network
+//config: (TCP or UDP) port open.
//applet:IF_FUSER(APPLET(fuser, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/iostat.c b/procps/iostat.c
index 94a928020..608d41364 100644
--- a/procps/iostat.c
+++ b/procps/iostat.c
@@ -11,7 +11,7 @@
//config: bool "iostat (7.4 kb)"
//config: default y
//config: help
-//config: Report CPU and I/O statistics
+//config: Report CPU and I/O statistics
//applet:IF_IOSTAT(APPLET(iostat, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/procps/kill.c b/procps/kill.c
index 3c330e5b9..5cff24475 100644
--- a/procps/kill.c
+++ b/procps/kill.c
@@ -11,26 +11,26 @@
//config: bool "kill (2.6 kb)"
//config: default y
//config: help
-//config: The command kill sends the specified signal to the specified
-//config: process or process group. If no signal is specified, the TERM
-//config: signal is sent.
+//config: The command kill sends the specified signal to the specified
+//config: process or process group. If no signal is specified, the TERM
+//config: signal is sent.
//config:
//config:config KILLALL
//config: bool "killall (5.6 kb)"
//config: default y
//config: help
-//config: killall sends a signal to all processes running any of the
-//config: specified commands. If no signal name is specified, SIGTERM is
-//config: sent.
+//config: killall sends a signal to all processes running any of the
+//config: specified commands. If no signal name is specified, SIGTERM is
+//config: sent.
//config:
//config:config KILLALL5
//config: bool "killall5 (5.3 kb)"
//config: default y
//config: help
-//config: The SystemV killall command. killall5 sends a signal
-//config: to all processes except kernel threads and the processes
-//config: in its own session, so it won't kill the shell that is running
-//config: the script it was called from.
+//config: The SystemV killall command. killall5 sends a signal
+//config: to all processes except kernel threads and the processes
+//config: in its own session, so it won't kill the shell that is running
+//config: the script it was called from.
//applet:IF_KILL(APPLET(kill, BB_DIR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/procps/lsof.c b/procps/lsof.c
index d1e994ab9..8d3a23cc8 100644
--- a/procps/lsof.c
+++ b/procps/lsof.c
@@ -11,8 +11,8 @@
//config: bool "lsof (3.6 kb)"
//config: default y
//config: help
-//config: Show open files in the format of:
-//config: PID <TAB> /path/to/executable <TAB> /path/to/opened/file
+//config: Show open files in the format of:
+//config: PID <TAB> /path/to/executable <TAB> /path/to/opened/file
//applet:IF_LSOF(APPLET(lsof, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/mpstat.c b/procps/mpstat.c
index 455cdb1b2..1eabd8e38 100644
--- a/procps/mpstat.c
+++ b/procps/mpstat.c
@@ -15,7 +15,7 @@
//config: bool "mpstat (10 kb)"
//config: default y
//config: help
-//config: Per-processor statistics
+//config: Per-processor statistics
#include "libbb.h"
#include <sys/utsname.h> /* struct utsname */
diff --git a/procps/nmeter.c b/procps/nmeter.c
index a7c548d98..9463f94dc 100644
--- a/procps/nmeter.c
+++ b/procps/nmeter.c
@@ -10,7 +10,7 @@
//config: bool "nmeter (10 kb)"
//config: default y
//config: help
-//config: Prints selected system stats continuously, one line per update.
+//config: Prints selected system stats continuously, one line per update.
//applet:IF_NMETER(APPLET(nmeter, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/pgrep.c b/procps/pgrep.c
index 335f2d226..327f6a934 100644
--- a/procps/pgrep.c
+++ b/procps/pgrep.c
@@ -10,13 +10,13 @@
//config: bool "pgrep (6.8 kb)"
//config: default y
//config: help
-//config: Look for processes by name.
+//config: Look for processes by name.
//config:
//config:config PKILL
//config: bool "pkill (7.6 kb)"
//config: default y
//config: help
-//config: Send signals to processes by name.
+//config: Send signals to processes by name.
//applet:IF_PGREP(APPLET(pgrep, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/procps/pidof.c b/procps/pidof.c
index 0d08c6095..41247a02c 100644
--- a/procps/pidof.c
+++ b/procps/pidof.c
@@ -10,24 +10,24 @@
//config: bool "pidof (6.6 kb)"
//config: default y
//config: help
-//config: Pidof finds the process id's (pids) of the named programs. It prints
-//config: those id's on the standard output.
+//config: Pidof finds the process id's (pids) of the named programs. It prints
+//config: those id's on the standard output.
//config:
//config:config FEATURE_PIDOF_SINGLE
//config: bool "Enable single shot (-s)"
//config: default y
//config: depends on PIDOF
//config: help
-//config: Support '-s' for returning only the first pid found.
+//config: Support '-s' for returning only the first pid found.
//config:
//config:config FEATURE_PIDOF_OMIT
//config: bool "Enable omitting pids (-o PID)"
//config: default y
//config: depends on PIDOF
//config: help
-//config: Support '-o PID' for omitting the given pid(s) in output.
-//config: The special pid %PPID can be used to name the parent process
-//config: of the pidof, in other words the calling shell or shell script.
+//config: Support '-o PID' for omitting the given pid(s) in output.
+//config: The special pid %PPID can be used to name the parent process
+//config: of the pidof, in other words the calling shell or shell script.
//applet:IF_PIDOF(APPLET(pidof, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/procps/pmap.c b/procps/pmap.c
index bbcd54482..c8f728897 100644
--- a/procps/pmap.c
+++ b/procps/pmap.c
@@ -9,10 +9,10 @@
*/
//config:config PMAP
-//config: bool "pmap (6 kb)"
-//config: default y
-//config: help
-//config: Display processes' memory mappings.
+//config: bool "pmap (6 kb)"
+//config: default y
+//config: help
+//config: Display processes' memory mappings.
//applet:IF_PMAP(APPLET(pmap, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_PMAP) += pmap.o
diff --git a/procps/powertop.c b/procps/powertop.c
index ae3aa8938..ebd659bdb 100644
--- a/procps/powertop.c
+++ b/procps/powertop.c
@@ -17,15 +17,15 @@
//config: bool "powertop (9.1 kb)"
//config: default y
//config: help
-//config: Analyze power consumption on Intel-based laptops
+//config: Analyze power consumption on Intel-based laptops
//config:
//config:config FEATURE_POWERTOP_INTERACTIVE
//config: bool "Accept keyboard commands"
//config: default y
//config: depends on POWERTOP
//config: help
-//config: Without this, powertop will only refresh display every 10 seconds.
-//config: No keyboard commands will work, only ^C to terminate.
+//config: Without this, powertop will only refresh display every 10 seconds.
+//config: No keyboard commands will work, only ^C to terminate.
// XXX This should be configurable
#define ENABLE_FEATURE_POWERTOP_PROCIRQ 1
diff --git a/procps/ps.c b/procps/ps.c
index a8d2d188a..d4d787d78 100644
--- a/procps/ps.c
+++ b/procps/ps.c
@@ -12,24 +12,24 @@
//config: bool "ps (11 kb)"
//config: default y
//config: help
-//config: ps gives a snapshot of the current processes.
+//config: ps gives a snapshot of the current processes.
//config:
//config:config FEATURE_PS_WIDE
//config: bool "Enable wide output option (-w)"
//config: default y
//config: depends on PS && !DESKTOP
//config: help
-//config: Support argument 'w' for wide output.
-//config: If given once, 132 chars are printed, and if given more
-//config: than once, the length is unlimited.
+//config: Support argument 'w' for wide output.
+//config: If given once, 132 chars are printed, and if given more
+//config: than once, the length is unlimited.
//config:
//config:config FEATURE_PS_LONG
//config: bool "Enable long output option (-l)"
//config: default y
//config: depends on PS && !DESKTOP
//config: help
-//config: Support argument 'l' for long output.
-//config: Adds fields PPID, RSS, START, TIME & TTY
+//config: Support argument 'l' for long output.
+//config: Adds fields PPID, RSS, START, TIME & TTY
//config:
//config:config FEATURE_PS_TIME
//config: bool "Support -o time and -o etime output specifiers"
@@ -42,8 +42,8 @@
//config: default n
//config: depends on FEATURE_PS_TIME
//config: help
-//config: Include support for measuring HZ on old kernels and non-ELF systems
-//config: (if you are on Linux 2.4.0+ and use ELF, you don't need this)
+//config: Include support for measuring HZ on old kernels and non-ELF systems
+//config: (if you are on Linux 2.4.0+ and use ELF, you don't need this)
//config:
//config:config FEATURE_PS_ADDITIONAL_COLUMNS
//config: bool "Support -o rgroup, -o ruser, -o nice specifiers"
diff --git a/procps/pstree.c b/procps/pstree.c
index cf8b81f8d..212cda23c 100644
--- a/procps/pstree.c
+++ b/procps/pstree.c
@@ -14,7 +14,7 @@
//config: bool "pstree (9.4 kb)"
//config: default y
//config: help
-//config: Display a tree of processes.
+//config: Display a tree of processes.
//applet:IF_PSTREE(APPLET(pstree, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/pwdx.c b/procps/pwdx.c
index 936153861..dac238950 100644
--- a/procps/pwdx.c
+++ b/procps/pwdx.c
@@ -12,7 +12,7 @@
//config: bool "pwdx (3.5 kb)"
//config: default y
//config: help
-//config: Report current working directory of a process
+//config: Report current working directory of a process
//applet:IF_PWDX(APPLET(pwdx, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/smemcap.c b/procps/smemcap.c
index 327a37cdb..c15fef1c3 100644
--- a/procps/smemcap.c
+++ b/procps/smemcap.c
@@ -16,8 +16,8 @@
//config: bool "smemcap (2.5 kb)"
//config: default y
//config: help
-//config: smemcap is a tool for capturing process data for smem,
-//config: a memory usage statistic tool.
+//config: smemcap is a tool for capturing process data for smem,
+//config: a memory usage statistic tool.
#include "libbb.h"
#include "bb_archive.h"
diff --git a/procps/sysctl.c b/procps/sysctl.c
index 305783be6..b17f5e896 100644
--- a/procps/sysctl.c
+++ b/procps/sysctl.c
@@ -14,7 +14,7 @@
//config: bool "sysctl (6.9 kb)"
//config: default y
//config: help
-//config: Configure kernel parameters at runtime.
+//config: Configure kernel parameters at runtime.
//applet:IF_BB_SYSCTL(APPLET(sysctl, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/procps/top.c b/procps/top.c
index f43cd9c2c..015d1ab74 100644
--- a/procps/top.c
+++ b/procps/top.c
@@ -53,63 +53,63 @@
//config: bool "top (17 kb)"
//config: default y
//config: help
-//config: The top program provides a dynamic real-time view of a running
-//config: system.
+//config: The top program provides a dynamic real-time view of a running
+//config: system.
//config:
//config:config FEATURE_TOP_INTERACTIVE
//config: bool "Accept keyboard commands"
//config: default y
//config: depends on TOP
//config: help
-//config: Without this, top will only refresh display every 5 seconds.
-//config: No keyboard commands will work, only ^C to terminate.
+//config: Without this, top will only refresh display every 5 seconds.
+//config: No keyboard commands will work, only ^C to terminate.
//config:
//config:config FEATURE_TOP_CPU_USAGE_PERCENTAGE
//config: bool "Show CPU per-process usage percentage"
//config: default y
//config: depends on TOP
//config: help
-//config: Make top display CPU usage for each process.
-//config: This adds about 2k.
+//config: Make top display CPU usage for each process.
+//config: This adds about 2k.
//config:
//config:config FEATURE_TOP_CPU_GLOBAL_PERCENTS
//config: bool "Show CPU global usage percentage"
//config: default y
//config: depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE
//config: help
-//config: Makes top display "CPU: NN% usr NN% sys..." line.
-//config: This adds about 0.5k.
+//config: Makes top display "CPU: NN% usr NN% sys..." line.
+//config: This adds about 0.5k.
//config:
//config:config FEATURE_TOP_SMP_CPU
//config: bool "SMP CPU usage display ('c' key)"
//config: default y
//config: depends on FEATURE_TOP_CPU_GLOBAL_PERCENTS
//config: help
-//config: Allow 'c' key to switch between individual/cumulative CPU stats
-//config: This adds about 0.5k.
+//config: Allow 'c' key to switch between individual/cumulative CPU stats
+//config: This adds about 0.5k.
//config:
//config:config FEATURE_TOP_DECIMALS
//config: bool "Show 1/10th of a percent in CPU/mem statistics"
//config: default y
//config: depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE
//config: help
-//config: Show 1/10th of a percent in CPU/mem statistics.
-//config: This adds about 0.3k.
+//config: Show 1/10th of a percent in CPU/mem statistics.
+//config: This adds about 0.3k.
//config:
//config:config FEATURE_TOP_SMP_PROCESS
//config: bool "Show CPU process runs on ('j' field)"
//config: default y
//config: depends on TOP
//config: help
-//config: Show CPU where process was last found running on.
-//config: This is the 'j' field.
+//config: Show CPU where process was last found running on.
+//config: This is the 'j' field.
//config:
//config:config FEATURE_TOPMEM
//config: bool "Topmem command ('s' key)"
//config: default y
//config: depends on TOP
//config: help
-//config: Enable 's' in top (gives lots of memory info).
+//config: Enable 's' in top (gives lots of memory info).
//applet:IF_TOP(APPLET(top, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/uptime.c b/procps/uptime.c
index 53fbe547e..24b2b39df 100644
--- a/procps/uptime.c
+++ b/procps/uptime.c
@@ -16,16 +16,16 @@
//config: default y
//config: select PLATFORM_LINUX #sysinfo()
//config: help
-//config: uptime gives a one line display of the current time, how long
-//config: the system has been running, how many users are currently logged
-//config: on, and the system load averages for the past 1, 5, and 15 minutes.
+//config: uptime gives a one line display of the current time, how long
+//config: the system has been running, how many users are currently logged
+//config: on, and the system load averages for the past 1, 5, and 15 minutes.
//config:
//config:config FEATURE_UPTIME_UTMP_SUPPORT
//config: bool "Show the number of users"
//config: default y
//config: depends on UPTIME && FEATURE_UTMP
//config: help
-//config: Display the number of users currently logged on.
+//config: Display the number of users currently logged on.
//applet:IF_UPTIME(APPLET(uptime, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/procps/watch.c b/procps/watch.c
index 3127a0ca6..2bb7cca90 100644
--- a/procps/watch.c
+++ b/procps/watch.c
@@ -15,8 +15,8 @@
//config: bool "watch (4.1 kb)"
//config: default y
//config: help
-//config: watch is used to execute a program periodically, showing
-//config: output to the screen.
+//config: watch is used to execute a program periodically, showing
+//config: output to the screen.
//applet:IF_WATCH(APPLET(watch, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/runit/chpst.c b/runit/chpst.c
index 2e94a37c0..3a2f9e616 100644
--- a/runit/chpst.c
+++ b/runit/chpst.c
@@ -31,33 +31,33 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//config: bool "chpst (8.7 kb)"
//config: default y
//config: help
-//config: chpst changes the process state according to the given options, and
-//config: execs specified program.
+//config: chpst changes the process state according to the given options, and
+//config: execs specified program.
//config:
//config:config SETUIDGID
//config: bool "setuidgid (4.2 kb)"
//config: default y
//config: help
-//config: Sets soft resource limits as specified by options
+//config: Sets soft resource limits as specified by options
//config:
//config:config ENVUIDGID
//config: bool "envuidgid (3.6 kb)"
//config: default y
//config: help
-//config: Sets $UID to account's uid and $GID to account's gid
+//config: Sets $UID to account's uid and $GID to account's gid
//config:
//config:config ENVDIR
//config: bool "envdir (2.5 kb)"
//config: default y
//config: help
-//config: Sets various environment variables as specified by files
-//config: in the given directory
+//config: Sets various environment variables as specified by files
+//config: in the given directory
//config:
//config:config SOFTLIMIT
//config: bool "softlimit (4.3 kb)"
//config: default y
//config: help
-//config: Sets soft resource limits as specified by options
+//config: Sets soft resource limits as specified by options
//applet:IF_CHPST(APPLET(chpst, BB_DIR_USR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/runit/runsv.c b/runit/runsv.c
index 79f02f4c5..ad7d82cb8 100644
--- a/runit/runsv.c
+++ b/runit/runsv.c
@@ -31,8 +31,8 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//config: bool "runsv (7.2 kb)"
//config: default y
//config: help
-//config: runsv starts and monitors a service and optionally an appendant log
-//config: service.
+//config: runsv starts and monitors a service and optionally an appendant log
+//config: service.
//applet:IF_RUNSV(APPLET(runsv, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/runit/runsvdir.c b/runit/runsvdir.c
index 946ae697d..b4f5c303b 100644
--- a/runit/runsvdir.c
+++ b/runit/runsvdir.c
@@ -31,18 +31,18 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//config: bool "runsvdir (6 kb)"
//config: default y
//config: help
-//config: runsvdir starts a runsv process for each subdirectory, or symlink to
-//config: a directory, in the services directory dir, up to a limit of 1000
-//config: subdirectories, and restarts a runsv process if it terminates.
+//config: runsvdir starts a runsv process for each subdirectory, or symlink to
+//config: a directory, in the services directory dir, up to a limit of 1000
+//config: subdirectories, and restarts a runsv process if it terminates.
//config:
//config:config FEATURE_RUNSVDIR_LOG
//config: bool "Enable scrolling argument log"
//config: depends on RUNSVDIR
//config: default n
//config: help
-//config: Enable feature where second parameter of runsvdir holds last error
-//config: message (viewable via top/ps). Otherwise (feature is off
-//config: or no parameter), error messages go to stderr only.
+//config: Enable feature where second parameter of runsvdir holds last error
+//config: message (viewable via top/ps). Otherwise (feature is off
+//config: or no parameter), error messages go to stderr only.
//applet:IF_RUNSVDIR(APPLET(runsvdir, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/runit/sv.c b/runit/sv.c
index a0c7953da..2d5b466bf 100644
--- a/runit/sv.c
+++ b/runit/sv.c
@@ -157,23 +157,23 @@ Exit Codes
//config: bool "sv (7.8 kb)"
//config: default y
//config: help
-//config: sv reports the current status and controls the state of services
-//config: monitored by the runsv supervisor.
+//config: sv reports the current status and controls the state of services
+//config: monitored by the runsv supervisor.
//config:
//config:config SV_DEFAULT_SERVICE_DIR
//config: string "Default directory for services"
//config: default "/var/service"
//config: depends on SV
//config: help
-//config: Default directory for services.
-//config: Defaults to "/var/service"
+//config: Default directory for services.
+//config: Defaults to "/var/service"
//config:
//config:config SVC
//config: bool "svc (7.8 kb)"
//config: default y
//config: help
-//config: svc controls the state of services monitored by the runsv supervisor.
-//config: It is comaptible with daemontools command with the same name.
+//config: svc controls the state of services monitored by the runsv supervisor.
+//config: It is comaptible with daemontools command with the same name.
//applet:IF_SV(APPLET(sv, BB_DIR_USR_BIN, BB_SUID_DROP))
//applet:IF_SVC(APPLET(svc, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/runit/svlogd.c b/runit/svlogd.c
index 1346994ca..8dbf67106 100644
--- a/runit/svlogd.c
+++ b/runit/svlogd.c
@@ -128,9 +128,9 @@ log message, you can use a pattern like this instead
//config: bool "svlogd (15 kb)"
//config: default y
//config: help
-//config: svlogd continuously reads log data from its standard input, optionally
-//config: filters log messages, and writes the data to one or more automatically
-//config: rotated logs.
+//config: svlogd continuously reads log data from its standard input, optionally
+//config: filters log messages, and writes the data to one or more automatically
+//config: rotated logs.
//applet:IF_SVLOGD(APPLET(svlogd, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/chcon.c b/selinux/chcon.c
index 6caf14750..ae87fb554 100644
--- a/selinux/chcon.c
+++ b/selinux/chcon.c
@@ -12,7 +12,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to change the security context of file.
+//config: Enable support to change the security context of file.
//config:
//config:config FEATURE_CHCON_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/selinux/getenforce.c b/selinux/getenforce.c
index 44bcdfd24..0286dd0be 100644
--- a/selinux/getenforce.c
+++ b/selinux/getenforce.c
@@ -11,7 +11,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to get the current mode of SELinux.
+//config: Enable support to get the current mode of SELinux.
//applet:IF_GETENFORCE(APPLET(getenforce, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/getsebool.c b/selinux/getsebool.c
index 2c56a05fc..6d7805c8d 100644
--- a/selinux/getsebool.c
+++ b/selinux/getsebool.c
@@ -11,7 +11,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to get SELinux boolean values.
+//config: Enable support to get SELinux boolean values.
//applet:IF_GETSEBOOL(APPLET(getsebool, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/load_policy.c b/selinux/load_policy.c
index 22ee0527d..b7930839c 100644
--- a/selinux/load_policy.c
+++ b/selinux/load_policy.c
@@ -9,7 +9,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to load SELinux policy.
+//config: Enable support to load SELinux policy.
//applet:IF_LOAD_POLICY(APPLET(load_policy, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/matchpathcon.c b/selinux/matchpathcon.c
index 7814f62ed..3388d0857 100644
--- a/selinux/matchpathcon.c
+++ b/selinux/matchpathcon.c
@@ -10,8 +10,8 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to get default security context of the
-//config: specified path from the file contexts configuration.
+//config: Enable support to get default security context of the
+//config: specified path from the file contexts configuration.
//applet:IF_MATCHPATHCON(APPLET(matchpathcon, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/runcon.c b/selinux/runcon.c
index f7d6fcd29..09082d6c2 100644
--- a/selinux/runcon.c
+++ b/selinux/runcon.c
@@ -33,7 +33,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to run command in specified security context.
+//config: Enable support to run command in specified security context.
//config:
//config:config FEATURE_RUNCON_LONG_OPTIONS
//config: bool "Enable long options"
diff --git a/selinux/selinuxenabled.c b/selinux/selinuxenabled.c
index e2c44b3b8..e70a452cf 100644
--- a/selinux/selinuxenabled.c
+++ b/selinux/selinuxenabled.c
@@ -11,8 +11,8 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support for this command to be used within shell scripts
-//config: to determine if selinux is enabled.
+//config: Enable support for this command to be used within shell scripts
+//config: to determine if selinux is enabled.
//applet:IF_SELINUXENABLED(APPLET(selinuxenabled, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/sestatus.c b/selinux/sestatus.c
index 719832e8f..daf4b223b 100644
--- a/selinux/sestatus.c
+++ b/selinux/sestatus.c
@@ -12,7 +12,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Displays the status of SELinux.
+//config: Displays the status of SELinux.
//applet:IF_SESTATUS(APPLET(sestatus, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/setenforce.c b/selinux/setenforce.c
index 2e4ab77b1..c28de6ec5 100644
--- a/selinux/setenforce.c
+++ b/selinux/setenforce.c
@@ -11,7 +11,7 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to modify the mode SELinux is running in.
+//config: Enable support to modify the mode SELinux is running in.
//applet:IF_SETENFORCE(APPLET(setenforce, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/selinux/setfiles.c b/selinux/setfiles.c
index ceba36326..01106bd67 100644
--- a/selinux/setfiles.c
+++ b/selinux/setfiles.c
@@ -8,26 +8,26 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to modify to relabel files.
-//config: Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64,
-//config: (It is default in libselinux's Makefile), you _must_ enable
-//config: CONFIG_LFS.
+//config: Enable support to modify to relabel files.
+//config: Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64,
+//config: (It is default in libselinux's Makefile), you _must_ enable
+//config: CONFIG_LFS.
//config:
//config:config FEATURE_SETFILES_CHECK_OPTION
//config: bool "Enable check option"
//config: default n
//config: depends on SETFILES
//config: help
-//config: Support "-c" option (check the validity of the contexts against
-//config: the specified binary policy) for setfiles. Requires libsepol.
+//config: Support "-c" option (check the validity of the contexts against
+//config: the specified binary policy) for setfiles. Requires libsepol.
//config:
//config:config RESTORECON
//config: bool "restorecon (12 kb)"
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support to relabel files. The feature is almost
-//config: the same as setfiles, but usage is a little different.
+//config: Enable support to relabel files. The feature is almost
+//config: the same as setfiles, but usage is a little different.
//applet:IF_SETFILES(APPLET(setfiles, BB_DIR_SBIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/selinux/setsebool.c b/selinux/setsebool.c
index 9005a384d..579118172 100644
--- a/selinux/setsebool.c
+++ b/selinux/setsebool.c
@@ -12,8 +12,8 @@
//config: default n
//config: depends on SELINUX
//config: help
-//config: Enable support for change boolean.
-//config: semanage and -P option is not supported yet.
+//config: Enable support for change boolean.
+//config: semanage and -P option is not supported yet.
//applet:IF_SETSEBOOL(APPLET(setsebool, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/shell/Config.src b/shell/Config.src
index 0dbf304ae..81c4ec874 100644
--- a/shell/Config.src
+++ b/shell/Config.src
@@ -10,26 +10,26 @@ choice
prompt "Choose which shell is aliased to 'sh' name"
default SH_IS_ASH
help
- Choose which shell you want to be executed by 'sh' alias.
- The ash shell is the most bash compatible and full featured one.
+ Choose which shell you want to be executed by 'sh' alias.
+ The ash shell is the most bash compatible and full featured one.
# note: cannot use "select ASH" here, it breaks "make allnoconfig"
config SH_IS_ASH
depends on !NOMMU
bool "ash"
help
- Choose ash to be the shell executed by 'sh' name.
- The ash code will be built into busybox. If you don't select
- "ash" choice (CONFIG_ASH), this shell may only be invoked by
- the name 'sh' (and not 'ash').
+ Choose ash to be the shell executed by 'sh' name.
+ The ash code will be built into busybox. If you don't select
+ "ash" choice (CONFIG_ASH), this shell may only be invoked by
+ the name 'sh' (and not 'ash').
config SH_IS_HUSH
bool "hush"
help
- Choose hush to be the shell executed by 'sh' name.
- The hush code will be built into busybox. If you don't select
- "hush" choice (CONFIG_HUSH), this shell may only be invoked by
- the name 'sh' (and not 'hush').
+ Choose hush to be the shell executed by 'sh' name.
+ The hush code will be built into busybox. If you don't select
+ "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+ the name 'sh' (and not 'hush').
config SH_IS_NONE
bool "none"
@@ -40,36 +40,36 @@ choice
prompt "Choose which shell is aliased to 'bash' name"
default BASH_IS_NONE
help
- Choose which shell you want to be executed by 'bash' alias.
- The ash shell is the most bash compatible and full featured one,
- although compatibility is far from being complete.
+ Choose which shell you want to be executed by 'bash' alias.
+ The ash shell is the most bash compatible and full featured one,
+ although compatibility is far from being complete.
- Note that selecting this option does not switch on any bash
- compatibility code. It merely makes it possible to install
- /bin/bash (sym)link and run scripts which start with
- #!/bin/bash line.
+ Note that selecting this option does not switch on any bash
+ compatibility code. It merely makes it possible to install
+ /bin/bash (sym)link and run scripts which start with
+ #!/bin/bash line.
- Many systems use it in scripts which use bash-specific features,
- even simple ones like $RANDOM. Without this option, busybox
- can't be used for running them because it won't recongnize
- "bash" as a supported applet name.
+ Many systems use it in scripts which use bash-specific features,
+ even simple ones like $RANDOM. Without this option, busybox
+ can't be used for running them because it won't recongnize
+ "bash" as a supported applet name.
config BASH_IS_ASH
depends on !NOMMU
bool "ash"
help
- Choose ash to be the shell executed by 'bash' name.
- The ash code will be built into busybox. If you don't select
- "ash" choice (CONFIG_ASH), this shell may only be invoked by
- the name 'bash' (and not 'ash').
+ Choose ash to be the shell executed by 'bash' name.
+ The ash code will be built into busybox. If you don't select
+ "ash" choice (CONFIG_ASH), this shell may only be invoked by
+ the name 'bash' (and not 'ash').
config BASH_IS_HUSH
bool "hush"
help
- Choose hush to be the shell executed by 'bash' name.
- The hush code will be built into busybox. If you don't select
- "hush" choice (CONFIG_HUSH), this shell may only be invoked by
- the name 'bash' (and not 'hush').
+ Choose hush to be the shell executed by 'bash' name.
+ The hush code will be built into busybox. If you don't select
+ "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+ the name 'bash' (and not 'hush').
config BASH_IS_NONE
bool "none"
@@ -88,78 +88,78 @@ config FEATURE_SH_MATH
default y
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- Enable math support in the shell via $((...)) syntax.
+ Enable math support in the shell via $((...)) syntax.
config FEATURE_SH_MATH_64
bool "Extend POSIX math support to 64 bit"
default y
depends on FEATURE_SH_MATH
help
- Enable 64-bit math support in the shell. This will make the shell
- slightly larger, but will allow computation with very large numbers.
- This is not in POSIX, so do not rely on this in portable code.
+ Enable 64-bit math support in the shell. This will make the shell
+ slightly larger, but will allow computation with very large numbers.
+ This is not in POSIX, so do not rely on this in portable code.
config FEATURE_SH_EXTRA_QUIET
bool "Hide message on interactive shell startup"
default y
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- Remove the busybox introduction when starting a shell.
+ Remove the busybox introduction when starting a shell.
config FEATURE_SH_STANDALONE
bool "Standalone shell"
default n
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- This option causes busybox shells to use busybox applets
- in preference to executables in the PATH whenever possible. For
- example, entering the command 'ifconfig' into the shell would cause
- busybox to use the ifconfig busybox applet. Specifying the fully
- qualified executable name, such as '/sbin/ifconfig' will still
- execute the /sbin/ifconfig executable on the filesystem. This option
- is generally used when creating a statically linked version of busybox
- for use as a rescue shell, in the event that you screw up your system.
-
- This is implemented by re-execing /proc/self/exe (typically)
- with right parameters.
-
- However, there are drawbacks: it is problematic in chroot jails
- without mounted /proc, and ps/top may show command name as 'exe'
- for applets started this way.
+ This option causes busybox shells to use busybox applets
+ in preference to executables in the PATH whenever possible. For
+ example, entering the command 'ifconfig' into the shell would cause
+ busybox to use the ifconfig busybox applet. Specifying the fully
+ qualified executable name, such as '/sbin/ifconfig' will still
+ execute the /sbin/ifconfig executable on the filesystem. This option
+ is generally used when creating a statically linked version of busybox
+ for use as a rescue shell, in the event that you screw up your system.
+
+ This is implemented by re-execing /proc/self/exe (typically)
+ with right parameters.
+
+ However, there are drawbacks: it is problematic in chroot jails
+ without mounted /proc, and ps/top may show command name as 'exe'
+ for applets started this way.
config FEATURE_SH_NOFORK
bool "Run 'nofork' applets directly"
default n
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- This option causes busybox shells to not execute typical
- fork/exec/wait sequence, but call <applet>_main directly,
- if possible. (Sometimes it is not possible: for example,
- this is not possible in pipes).
+ This option causes busybox shells to not execute typical
+ fork/exec/wait sequence, but call <applet>_main directly,
+ if possible. (Sometimes it is not possible: for example,
+ this is not possible in pipes).
- This will be done only for some applets (those which are marked
- NOFORK in include/applets.h).
+ This will be done only for some applets (those which are marked
+ NOFORK in include/applets.h).
- This may significantly speed up some shell scripts.
+ This may significantly speed up some shell scripts.
- This feature is relatively new. Use with care. Report bugs
- to project mailing list.
+ This feature is relatively new. Use with care. Report bugs
+ to project mailing list.
config FEATURE_SH_READ_FRAC
bool "read -t N.NNN support (+110 bytes)"
default y
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- Enable support for fractional second timeout in read builtin.
+ Enable support for fractional second timeout in read builtin.
config FEATURE_SH_HISTFILESIZE
bool "Use $HISTFILESIZE"
default y
depends on ASH || HUSH || SH_IS_ASH || BASH_IS_ASH || SH_IS_HUSH || BASH_IS_HUSH
help
- This option makes busybox shells to use $HISTFILESIZE variable
- to set shell history size. Note that its max value is capped
- by "History size" setting in library tuning section.
+ This option makes busybox shells to use $HISTFILESIZE variable
+ to set shell history size. Note that its max value is capped
+ by "History size" setting in library tuning section.
endif # Options common to all shells
diff --git a/shell/ash.c b/shell/ash.c
index 9d81f4ba8..b28731eb1 100644
--- a/shell/ash.c
+++ b/shell/ash.c
@@ -20,10 +20,10 @@
//config: default y
//config: depends on !NOMMU
//config: help
-//config: The most complete and most pedantically correct shell included with
-//config: busybox. This shell is actually a derivative of the Debian 'dash'
-//config: shell (by Herbert Xu), which was created by porting the 'ash' shell
-//config: (written by Kenneth Almquist) from NetBSD.
+//config: The most complete and most pedantically correct shell included with
+//config: busybox. This shell is actually a derivative of the Debian 'dash'
+//config: shell (by Herbert Xu), which was created by porting the 'ash' shell
+//config: (written by Kenneth Almquist) from NetBSD.
//config:
//config:# ash options
//config:# note: Don't remove !NOMMU part in the next line; it would break
@@ -40,11 +40,11 @@
//config: default y # Y is bigger, but because of uclibc glob() bug, let Y be default for now
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: Do not use glob() function from libc, use internal implementation.
-//config: Use this if you are getting "glob.h: No such file or directory"
-//config: or similar build errors.
-//config: Note that as of now (2017-01), uclibc and musl glob() both have bugs
-//config: which would break ash if you select N here.
+//config: Do not use glob() function from libc, use internal implementation.
+//config: Use this if you are getting "glob.h: No such file or directory"
+//config: or similar build errors.
+//config: Note that as of now (2017-01), uclibc and musl glob() both have bugs
+//config: which would break ash if you select N here.
//config:
//config:config ASH_BASH_COMPAT
//config: bool "bash-compatible extensions"
@@ -66,37 +66,37 @@
//config: default y
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: Enable pseudorandom generator and dynamic variable "$RANDOM".
-//config: Each read of "$RANDOM" will generate a new pseudorandom value.
-//config: You can reset the generator by using a specified start value.
-//config: After "unset RANDOM" the generator will switch off and this
-//config: variable will no longer have special treatment.
+//config: Enable pseudorandom generator and dynamic variable "$RANDOM".
+//config: Each read of "$RANDOM" will generate a new pseudorandom value.
+//config: You can reset the generator by using a specified start value.
+//config: After "unset RANDOM" the generator will switch off and this
+//config: variable will no longer have special treatment.
//config:
//config:config ASH_EXPAND_PRMT
//config: bool "Expand prompt string"
//config: default y
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: $PS# may contain volatile content, such as backquote commands.
-//config: This option recreates the prompt string from the environment
-//config: variable each time it is displayed.
+//config: $PS# may contain volatile content, such as backquote commands.
+//config: This option recreates the prompt string from the environment
+//config: variable each time it is displayed.
//config:
//config:config ASH_IDLE_TIMEOUT
//config: bool "Idle timeout variable $TMOUT"
//config: default y
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: Enable bash-like auto-logout after $TMOUT seconds of idle time.
+//config: Enable bash-like auto-logout after $TMOUT seconds of idle time.
//config:
//config:config ASH_MAIL
//config: bool "Check for new mail in interactive shell"
//config: default y
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: Enable "check for new mail" function:
-//config: if set, $MAIL file and $MAILPATH list of files
-//config: are checked for mtime changes, and "you have mail"
-//config: message is printed if change is detected.
+//config: Enable "check for new mail" function:
+//config: if set, $MAIL file and $MAILPATH list of files
+//config: are checked for mtime changes, and "you have mail"
+//config: message is printed if change is detected.
//config:
//config:config ASH_ECHO
//config: bool "echo builtin"
@@ -128,9 +128,9 @@
//config: default y
//config: depends on ASH || SH_IS_ASH || BASH_IS_ASH
//config: help
-//config: Enable support for the 'command' builtin, which allows
-//config: you to run the specified command or builtin,
-//config: even when there is a function with the same name.
+//config: Enable support for the 'command' builtin, which allows
+//config: you to run the specified command or builtin,
+//config: even when there is a function with the same name.
//config:
//config:endif # ash options
diff --git a/shell/cttyhack.c b/shell/cttyhack.c
index 9a5f4bb52..9004b4763 100644
--- a/shell/cttyhack.c
+++ b/shell/cttyhack.c
@@ -14,45 +14,45 @@
//config: bool "cttyhack (2.5 kb)"
//config: default y
//config: help
-//config: One common problem reported on the mailing list is the "can't
-//config: access tty; job control turned off" error message, which typically
-//config: appears when one tries to use a shell with stdin/stdout on
-//config: /dev/console.
-//config: This device is special - it cannot be a controlling tty.
+//config: One common problem reported on the mailing list is the "can't
+//config: access tty; job control turned off" error message, which typically
+//config: appears when one tries to use a shell with stdin/stdout on
+//config: /dev/console.
+//config: This device is special - it cannot be a controlling tty.
//config:
-//config: The proper solution is to use the correct device instead of
-//config: /dev/console.
+//config: The proper solution is to use the correct device instead of
+//config: /dev/console.
//config:
-//config: cttyhack provides a "quick and dirty" solution to this problem.
-//config: It analyzes stdin with various ioctls, trying to determine whether
-//config: it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
-//config: On Linux it also checks sysfs for a pointer to the active console.
-//config: If cttyhack is able to find the real console device, it closes
-//config: stdin/out/err and reopens that device.
-//config: Then it executes the given program. Opening the device will make
-//config: that device a controlling tty. This may require cttyhack
-//config: to be a session leader.
+//config: cttyhack provides a "quick and dirty" solution to this problem.
+//config: It analyzes stdin with various ioctls, trying to determine whether
+//config: it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
+//config: On Linux it also checks sysfs for a pointer to the active console.
+//config: If cttyhack is able to find the real console device, it closes
+//config: stdin/out/err and reopens that device.
+//config: Then it executes the given program. Opening the device will make
+//config: that device a controlling tty. This may require cttyhack
+//config: to be a session leader.
//config:
-//config: Example for /etc/inittab (for busybox init):
+//config: Example for /etc/inittab (for busybox init):
//config:
-//config: ::respawn:/bin/cttyhack /bin/sh
+//config: ::respawn:/bin/cttyhack /bin/sh
//config:
-//config: Starting an interactive shell from boot shell script:
+//config: Starting an interactive shell from boot shell script:
//config:
-//config: setsid cttyhack sh
+//config: setsid cttyhack sh
//config:
-//config: Giving controlling tty to shell running with PID 1:
+//config: Giving controlling tty to shell running with PID 1:
//config:
-//config: # exec cttyhack sh
+//config: # exec cttyhack sh
//config:
-//config: Without cttyhack, you need to know exact tty name,
-//config: and do something like this:
+//config: Without cttyhack, you need to know exact tty name,
+//config: and do something like this:
//config:
-//config: # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
+//config: # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
//config:
-//config: Starting getty on a controlling tty from a shell script:
+//config: Starting getty on a controlling tty from a shell script:
//config:
-//config: # getty 115200 $(cttyhack)
+//config: # getty 115200 $(cttyhack)
//usage:#define cttyhack_trivial_usage
//usage: "[PROG ARGS]"
diff --git a/shell/hush.c b/shell/hush.c
index 4f1f81f31..170d5f33b 100644
--- a/shell/hush.c
+++ b/shell/hush.c
@@ -104,15 +104,15 @@
//config: bool "hush (64 kb)"
//config: default y
//config: help
-//config: hush is a small shell. It handles the normal flow control
-//config: constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
-//config: case/esac. Redirections, here documents, $((arithmetic))
-//config: and functions are supported.
+//config: hush is a small shell. It handles the normal flow control
+//config: constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
+//config: case/esac. Redirections, here documents, $((arithmetic))
+//config: and functions are supported.
//config:
-//config: It will compile and work on no-mmu systems.
+//config: It will compile and work on no-mmu systems.
//config:
-//config: It does not handle select, aliases, tilde expansion,
-//config: &>file and >&file redirection of stdout+stderr.
+//config: It does not handle select, aliases, tilde expansion,
+//config: &>file and >&file redirection of stdout+stderr.
//config:
//config:config HUSH_BASH_COMPAT
//config: bool "bash-compatible extensions"
@@ -124,17 +124,17 @@
//config: default y
//config: depends on HUSH_BASH_COMPAT
//config: help
-//config: Enable {abc,def} extension.
+//config: Enable {abc,def} extension.
//config:
//config:config HUSH_INTERACTIVE
//config: bool "Interactive mode"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable interactive mode (prompt and command editing).
-//config: Without this, hush simply reads and executes commands
-//config: from stdin just like a shell script from a file.
-//config: No prompt, no PS1/PS2 magic shell variables.
+//config: Enable interactive mode (prompt and command editing).
+//config: Without this, hush simply reads and executes commands
+//config: from stdin just like a shell script from a file.
+//config: No prompt, no PS1/PS2 magic shell variables.
//config:
//config:config HUSH_SAVEHISTORY
//config: bool "Save command history to .hush_history"
@@ -146,18 +146,18 @@
//config: default y
//config: depends on HUSH_INTERACTIVE
//config: help
-//config: Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
-//config: command (not entire shell), fg/bg builtins work. Without this option,
-//config: "cmd &" still works by simply spawning a process and immediately
-//config: prompting for next command (or executing next command in a script),
-//config: but no separate process group is formed.
+//config: Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
+//config: command (not entire shell), fg/bg builtins work. Without this option,
+//config: "cmd &" still works by simply spawning a process and immediately
+//config: prompting for next command (or executing next command in a script),
+//config: but no separate process group is formed.
//config:
//config:config HUSH_TICK
//config: bool "Support process substitution"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable `command` and $(command).
+//config: Enable `command` and $(command).
//config:
//config:config HUSH_IF
//config: bool "Support if/then/elif/else/fi"
@@ -174,37 +174,37 @@
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable case ... esac statement. +400 bytes.
+//config: Enable case ... esac statement. +400 bytes.
//config:
//config:config HUSH_FUNCTIONS
//config: bool "Support funcname() { commands; } syntax"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable support for shell functions. +800 bytes.
+//config: Enable support for shell functions. +800 bytes.
//config:
//config:config HUSH_LOCAL
//config: bool "local builtin"
//config: default y
//config: depends on HUSH_FUNCTIONS
//config: help
-//config: Enable support for local variables in functions.
+//config: Enable support for local variables in functions.
//config:
//config:config HUSH_RANDOM_SUPPORT
//config: bool "Pseudorandom generator and $RANDOM variable"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable pseudorandom generator and dynamic variable "$RANDOM".
-//config: Each read of "$RANDOM" will generate a new pseudorandom value.
+//config: Enable pseudorandom generator and dynamic variable "$RANDOM".
+//config: Each read of "$RANDOM" will generate a new pseudorandom value.
//config:
//config:config HUSH_MODE_X
//config: bool "Support 'hush -x' option and 'set -x' command"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: This instructs hush to print commands before execution.
-//config: Adds ~300 bytes.
+//config: This instructs hush to print commands before execution.
+//config: Adds ~300 bytes.
//config:
//config:config HUSH_ECHO
//config: bool "echo builtin"
@@ -236,14 +236,14 @@
//config: default y
//config: depends on HUSH_EXPORT
//config: help
-//config: export -n unexports variables. It is a bash extension.
+//config: export -n unexports variables. It is a bash extension.
//config:
//config:config HUSH_READONLY
//config: bool "readonly builtin"
//config: default y
//config: depends on HUSH || SH_IS_HUSH || BASH_IS_HUSH
//config: help
-//config: Enable support for read-only variables.
+//config: Enable support for read-only variables.
//config:
//config:config HUSH_KILL
//config: bool "kill builtin (supports kill %jobspec)"
diff --git a/sysklogd/klogd.c b/sysklogd/klogd.c
index b20d86174..728cc8d38 100644
--- a/sysklogd/klogd.c
+++ b/sysklogd/klogd.c
@@ -20,11 +20,11 @@
//config: bool "klogd (5.5 kb)"
//config: default y
//config: help
-//config: klogd is a utility which intercepts and logs all
-//config: messages from the Linux kernel and sends the messages
-//config: out to the 'syslogd' utility so they can be logged. If
-//config: you wish to record the messages produced by the kernel,
-//config: you should enable this option.
+//config: klogd is a utility which intercepts and logs all
+//config: messages from the Linux kernel and sends the messages
+//config: out to the 'syslogd' utility so they can be logged. If
+//config: you wish to record the messages produced by the kernel,
+//config: you should enable this option.
//config:
//config:comment "klogd should not be used together with syslog to kernel printk buffer"
//config: depends on KLOGD && FEATURE_KMSG_SYSLOG
@@ -35,16 +35,16 @@
//config: depends on KLOGD
//config: select PLATFORM_LINUX
//config: help
-//config: The klogd applet supports two interfaces for reading
-//config: kernel messages. Linux provides the klogctl() interface
-//config: which allows reading messages from the kernel ring buffer
-//config: independently from the file system.
+//config: The klogd applet supports two interfaces for reading
+//config: kernel messages. Linux provides the klogctl() interface
+//config: which allows reading messages from the kernel ring buffer
+//config: independently from the file system.
//config:
-//config: If you answer 'N' here, klogd will use the more portable
-//config: approach of reading them from /proc or a device node.
-//config: However, this method requires the file to be available.
+//config: If you answer 'N' here, klogd will use the more portable
+//config: approach of reading them from /proc or a device node.
+//config: However, this method requires the file to be available.
//config:
-//config: If in doubt, say 'Y'.
+//config: If in doubt, say 'Y'.
//applet:IF_KLOGD(APPLET(klogd, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/sysklogd/logger.c b/sysklogd/logger.c
index 09fed0c73..6769a8175 100644
--- a/sysklogd/logger.c
+++ b/sysklogd/logger.c
@@ -11,10 +11,10 @@
//config: default y
//config: select FEATURE_SYSLOG
//config: help
-//config: The logger utility allows you to send arbitrary text
-//config: messages to the system log (i.e. the 'syslogd' utility) so
-//config: they can be logged. This is generally used to help locate
-//config: problems that occur within programs and scripts.
+//config: The logger utility allows you to send arbitrary text
+//config: messages to the system log (i.e. the 'syslogd' utility) so
+//config: they can be logged. This is generally used to help locate
+//config: problems that occur within programs and scripts.
//applet:IF_LOGGER(APPLET(logger, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/sysklogd/logread.c b/sysklogd/logread.c
index dd4c7cb6d..da552e087 100644
--- a/sysklogd/logread.c
+++ b/sysklogd/logread.c
@@ -14,21 +14,21 @@
//WRONG: it should be compilable without SYSLOG=y:
//WRONG: depends on FEATURE_IPC_SYSLOG
//config: help
-//config: If you enabled Circular Buffer support, you almost
-//config: certainly want to enable this feature as well. This
-//config: utility will allow you to read the messages that are
-//config: stored in the syslogd circular buffer.
+//config: If you enabled Circular Buffer support, you almost
+//config: certainly want to enable this feature as well. This
+//config: utility will allow you to read the messages that are
+//config: stored in the syslogd circular buffer.
//config:
//config:config FEATURE_LOGREAD_REDUCED_LOCKING
//config: bool "Double buffering"
//config: default y
//config: depends on LOGREAD
//config: help
-//config: 'logread' output to slow serial terminals can have
-//config: side effects on syslog because of the semaphore.
-//config: This option make logread to double buffer copy
-//config: from circular buffer, minimizing semaphore
-//config: contention at some minor memory expense.
+//config: 'logread' output to slow serial terminals can have
+//config: side effects on syslog because of the semaphore.
+//config: This option make logread to double buffer copy
+//config: from circular buffer, minimizing semaphore
+//config: contention at some minor memory expense.
//config:
//applet:IF_LOGREAD(APPLET(logread, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/sysklogd/syslogd.c b/sysklogd/syslogd.c
index a9c9c69bc..31730a7f9 100644
--- a/sysklogd/syslogd.c
+++ b/sysklogd/syslogd.c
@@ -16,53 +16,53 @@
//config: bool "syslogd (12 kb)"
//config: default y
//config: help
-//config: The syslogd utility is used to record logs of all the
-//config: significant events that occur on a system. Every
-//config: message that is logged records the date and time of the
-//config: event, and will generally also record the name of the
-//config: application that generated the message. When used in
-//config: conjunction with klogd, messages from the Linux kernel
-//config: can also be recorded. This is terribly useful,
-//config: especially for finding what happened when something goes
-//config: wrong. And something almost always will go wrong if
-//config: you wait long enough....
+//config: The syslogd utility is used to record logs of all the
+//config: significant events that occur on a system. Every
+//config: message that is logged records the date and time of the
+//config: event, and will generally also record the name of the
+//config: application that generated the message. When used in
+//config: conjunction with klogd, messages from the Linux kernel
+//config: can also be recorded. This is terribly useful,
+//config: especially for finding what happened when something goes
+//config: wrong. And something almost always will go wrong if
+//config: you wait long enough....
//config:
//config:config FEATURE_ROTATE_LOGFILE
//config: bool "Rotate message files"
//config: default y
//config: depends on SYSLOGD
//config: help
-//config: This enables syslogd to rotate the message files
-//config: on his own. No need to use an external rotate script.
+//config: This enables syslogd to rotate the message files
+//config: on his own. No need to use an external rotate script.
//config:
//config:config FEATURE_REMOTE_LOG
//config: bool "Remote Log support"
//config: default y
//config: depends on SYSLOGD
//config: help
-//config: When you enable this feature, the syslogd utility can
-//config: be used to send system log messages to another system
-//config: connected via a network. This allows the remote
-//config: machine to log all the system messages, which can be
-//config: terribly useful for reducing the number of serial
-//config: cables you use. It can also be a very good security
-//config: measure to prevent system logs from being tampered with
-//config: by an intruder.
+//config: When you enable this feature, the syslogd utility can
+//config: be used to send system log messages to another system
+//config: connected via a network. This allows the remote
+//config: machine to log all the system messages, which can be
+//config: terribly useful for reducing the number of serial
+//config: cables you use. It can also be a very good security
+//config: measure to prevent system logs from being tampered with
+//config: by an intruder.
//config:
//config:config FEATURE_SYSLOGD_DUP
//config: bool "Support -D (drop dups) option"
//config: default y
//config: depends on SYSLOGD
//config: help
-//config: Option -D instructs syslogd to drop consecutive messages
-//config: which are totally the same.
+//config: Option -D instructs syslogd to drop consecutive messages
+//config: which are totally the same.
//config:
//config:config FEATURE_SYSLOGD_CFG
//config: bool "Support syslog.conf"
//config: default y
//config: depends on SYSLOGD
//config: help
-//config: Supports restricted syslogd config. See docs/syslog.conf.txt
+//config: Supports restricted syslogd config. See docs/syslog.conf.txt
//config:
//config:config FEATURE_SYSLOGD_READ_BUFFER_SIZE
//config: int "Read buffer size in bytes"
@@ -70,23 +70,23 @@
//config: range 256 20000
//config: depends on SYSLOGD
//config: help
-//config: This option sets the size of the syslog read buffer.
-//config: Actual memory usage increases around five times the
-//config: change done here.
+//config: This option sets the size of the syslog read buffer.
+//config: Actual memory usage increases around five times the
+//config: change done here.
//config:
//config:config FEATURE_IPC_SYSLOG
//config: bool "Circular Buffer support"
//config: default y
//config: depends on SYSLOGD
//config: help
-//config: When you enable this feature, the syslogd utility will
-//config: use a circular buffer to record system log messages.
-//config: When the buffer is filled it will continue to overwrite
-//config: the oldest messages. This can be very useful for
-//config: systems with little or no permanent storage, since
-//config: otherwise system logs can eventually fill up your
-//config: entire filesystem, which may cause your system to
-//config: break badly.
+//config: When you enable this feature, the syslogd utility will
+//config: use a circular buffer to record system log messages.
+//config: When the buffer is filled it will continue to overwrite
+//config: the oldest messages. This can be very useful for
+//config: systems with little or no permanent storage, since
+//config: otherwise system logs can eventually fill up your
+//config: entire filesystem, which may cause your system to
+//config: break badly.
//config:
//config:config FEATURE_IPC_SYSLOG_BUFFER_SIZE
//config: int "Circular buffer size in Kbytes (minimum 4KB)"
@@ -94,8 +94,8 @@
//config: range 4 2147483647
//config: depends on FEATURE_IPC_SYSLOG
//config: help
-//config: This option sets the size of the circular buffer
-//config: used to record system log messages.
+//config: This option sets the size of the circular buffer
+//config: used to record system log messages.
//config:
//config:config FEATURE_KMSG_SYSLOG
//config: bool "Linux kernel printk buffer support"
@@ -103,12 +103,12 @@
//config: depends on SYSLOGD
//config: select PLATFORM_LINUX
//config: help
-//config: When you enable this feature, the syslogd utility will
-//config: write system log message to the Linux kernel's printk buffer.
-//config: This can be used as a smaller alternative to the syslogd IPC
-//config: support, as klogd and logread aren't needed.
+//config: When you enable this feature, the syslogd utility will
+//config: write system log message to the Linux kernel's printk buffer.
+//config: This can be used as a smaller alternative to the syslogd IPC
+//config: support, as klogd and logread aren't needed.
//config:
-//config: NOTICE: Syslog facilities in log entries needs kernel 3.5+.
+//config: NOTICE: Syslog facilities in log entries needs kernel 3.5+.
//applet:IF_SYSLOGD(APPLET(syslogd, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/Config.src b/util-linux/Config.src
index 0971d714a..68fcc266f 100644
--- a/util-linux/Config.src
+++ b/util-linux/Config.src
@@ -15,29 +15,29 @@ config FEATURE_MOUNT_LOOP
default y
depends on MOUNT || UMOUNT
help
- Enabling this feature allows automatic mounting of files (containing
- filesystem images) via the linux kernel's loopback devices.
- The mount command will detect you are trying to mount a file instead
- of a block device, and transparently associate the file with a
- loopback device. The umount command will also free that loopback
- device.
+ Enabling this feature allows automatic mounting of files (containing
+ filesystem images) via the linux kernel's loopback devices.
+ The mount command will detect you are trying to mount a file instead
+ of a block device, and transparently associate the file with a
+ loopback device. The umount command will also free that loopback
+ device.
- You can still use the 'losetup' utility (to manually associate files
- with loop devices) if you need to do something advanced, such as
- specify an offset or cryptographic options to the loopback device.
- (If you don't want umount to free the loop device, use "umount -D".)
+ You can still use the 'losetup' utility (to manually associate files
+ with loop devices) if you need to do something advanced, such as
+ specify an offset or cryptographic options to the loopback device.
+ (If you don't want umount to free the loop device, use "umount -D".)
config FEATURE_MOUNT_LOOP_CREATE
bool "Create new loopback devices if needed"
default y
depends on FEATURE_MOUNT_LOOP
help
- Linux kernels >= 2.6.24 support unlimited loopback devices. They are
- allocated for use when trying to use a loop device. The loop device
- must however exist.
+ Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+ allocated for use when trying to use a loop device. The loop device
+ must however exist.
- This feature lets mount to try to create next /dev/loopN device
- if it does not find a free one.
+ This feature lets mount to try to create next /dev/loopN device
+ if it does not find a free one.
config FEATURE_MTAB_SUPPORT
bool "Support old /etc/mtab file"
@@ -45,23 +45,23 @@ config FEATURE_MTAB_SUPPORT
depends on MOUNT || UMOUNT
select FEATURE_MOUNT_FAKE
help
- Historically, Unix systems kept track of the currently mounted
- partitions in the file "/etc/mtab". These days, the kernel exports
- the list of currently mounted partitions in "/proc/mounts", rendering
- the old mtab file obsolete. (In modern systems, /etc/mtab should be
- a symlink to /proc/mounts.)
+ Historically, Unix systems kept track of the currently mounted
+ partitions in the file "/etc/mtab". These days, the kernel exports
+ the list of currently mounted partitions in "/proc/mounts", rendering
+ the old mtab file obsolete. (In modern systems, /etc/mtab should be
+ a symlink to /proc/mounts.)
- The only reason to have mount maintain an /etc/mtab file itself is if
- your stripped-down embedded system does not have a /proc directory.
- If you must use this, keep in mind it's inherently brittle (for
- example a mount under chroot won't update it), can't handle modern
- features like separate per-process filesystem namespaces, requires
- that your /etc directory be writable, tends to get easily confused
- by --bind or --move mounts, won't update if you rename a directory
- that contains a mount point, and so on. (In brief: avoid.)
+ The only reason to have mount maintain an /etc/mtab file itself is if
+ your stripped-down embedded system does not have a /proc directory.
+ If you must use this, keep in mind it's inherently brittle (for
+ example a mount under chroot won't update it), can't handle modern
+ features like separate per-process filesystem namespaces, requires
+ that your /etc directory be writable, tends to get easily confused
+ by --bind or --move mounts, won't update if you rename a directory
+ that contains a mount point, and so on. (In brief: avoid.)
- About the only reason to use this is if you've removed /proc from
- your kernel.
+ About the only reason to use this is if you've removed /proc from
+ your kernel.
source util-linux/volume_id/Config.in
diff --git a/util-linux/acpid.c b/util-linux/acpid.c
index 7abea1400..3c3811752 100644
--- a/util-linux/acpid.c
+++ b/util-linux/acpid.c
@@ -11,23 +11,23 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: acpid listens to ACPI events coming either in textual form from
-//config: /proc/acpi/event (though it is marked deprecated it is still widely
-//config: used and _is_ a standard) or in binary form from specified evdevs
-//config: (just use /dev/input/event*).
+//config: acpid listens to ACPI events coming either in textual form from
+//config: /proc/acpi/event (though it is marked deprecated it is still widely
+//config: used and _is_ a standard) or in binary form from specified evdevs
+//config: (just use /dev/input/event*).
//config:
-//config: It parses the event to retrieve ACTION and a possible PARAMETER.
-//config: It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-//config: (if the resulting path is a directory) or directly as an executable.
+//config: It parses the event to retrieve ACTION and a possible PARAMETER.
+//config: It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+//config: (if the resulting path is a directory) or directly as an executable.
//config:
-//config: N.B. acpid relies on run-parts so have the latter installed.
+//config: N.B. acpid relies on run-parts so have the latter installed.
//config:
//config:config FEATURE_ACPID_COMPAT
//config: bool "Accept and ignore redundant options"
//config: default y
//config: depends on ACPID
//config: help
-//config: Accept and ignore compatibility options -g -m -s -S -v.
+//config: Accept and ignore compatibility options -g -m -s -S -v.
//applet:IF_ACPID(APPLET(acpid, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/blkdiscard.c b/util-linux/blkdiscard.c
index 690062970..8f6a4ab6c 100644
--- a/util-linux/blkdiscard.c
+++ b/util-linux/blkdiscard.c
@@ -9,7 +9,7 @@
//config: bool "blkdiscard (5.3 kb)"
//config: default y
//config: help
-//config: blkdiscard discards sectors on a given device.
+//config: blkdiscard discards sectors on a given device.
//kbuild:lib-$(CONFIG_BLKDISCARD) += blkdiscard.o
//applet:IF_BLKDISCARD(APPLET(blkdiscard, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/blkid.c b/util-linux/blkid.c
index 08fa07968..f353cf248 100644
--- a/util-linux/blkid.c
+++ b/util-linux/blkid.c
@@ -12,16 +12,16 @@
//config: select PLATFORM_LINUX
//config: select VOLUMEID
//config: help
-//config: Lists labels and UUIDs of all filesystems.
-//config: WARNING:
-//config: With all submodules selected, it will add ~8k to busybox.
+//config: Lists labels and UUIDs of all filesystems.
+//config: WARNING:
+//config: With all submodules selected, it will add ~8k to busybox.
//config:
//config:config FEATURE_BLKID_TYPE
//config: bool "Print filesystem type"
//config: default n
//config: depends on BLKID
//config: help
-//config: Show TYPE="filesystem type"
+//config: Show TYPE="filesystem type"
//applet:IF_BLKID(APPLET(blkid, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/blockdev.c b/util-linux/blockdev.c
index 9924ef06f..9e1fef206 100644
--- a/util-linux/blockdev.c
+++ b/util-linux/blockdev.c
@@ -9,7 +9,7 @@
//config: bool "blockdev (2.4 kb)"
//config: default y
//config: help
-//config: Performs some ioctls with block devices.
+//config: Performs some ioctls with block devices.
//applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/cal.c b/util-linux/cal.c
index f7a965619..091fdbd2b 100644
--- a/util-linux/cal.c
+++ b/util-linux/cal.c
@@ -14,7 +14,7 @@
//config: bool "cal (6.5 kb)"
//config: default y
//config: help
-//config: cal is used to display a monthly calendar.
+//config: cal is used to display a monthly calendar.
//applet:IF_CAL(APPLET(cal, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/chrt.c b/util-linux/chrt.c
index ad13dd512..4bc8b6cfa 100644
--- a/util-linux/chrt.c
+++ b/util-linux/chrt.c
@@ -9,8 +9,8 @@
//config: bool "chrt (4.4 kb)"
//config: default y
//config: help
-//config: manipulate real-time attributes of a process.
-//config: This requires sched_{g,s}etparam support in your libc.
+//config: manipulate real-time attributes of a process.
+//config: This requires sched_{g,s}etparam support in your libc.
//applet:IF_CHRT(APPLET(chrt, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/dmesg.c b/util-linux/dmesg.c
index 5822d0290..6da9d9f4e 100644
--- a/util-linux/dmesg.c
+++ b/util-linux/dmesg.c
@@ -13,34 +13,34 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: dmesg is used to examine or control the kernel ring buffer. When the
-//config: Linux kernel prints messages to the system log, they are stored in
-//config: the kernel ring buffer. You can use dmesg to print the kernel's ring
-//config: buffer, clear the kernel ring buffer, change the size of the kernel
-//config: ring buffer, and change the priority level at which kernel messages
-//config: are also logged to the system console. Enable this option if you
-//config: wish to enable the 'dmesg' utility.
+//config: dmesg is used to examine or control the kernel ring buffer. When the
+//config: Linux kernel prints messages to the system log, they are stored in
+//config: the kernel ring buffer. You can use dmesg to print the kernel's ring
+//config: buffer, clear the kernel ring buffer, change the size of the kernel
+//config: ring buffer, and change the priority level at which kernel messages
+//config: are also logged to the system console. Enable this option if you
+//config: wish to enable the 'dmesg' utility.
//config:
//config:config FEATURE_DMESG_PRETTY
//config: bool "Pretty output"
//config: default y
//config: depends on DMESG
//config: help
-//config: If you wish to scrub the syslog level from the output, say 'Y' here.
-//config: The syslog level is a string prefixed to every line with the form
-//config: "<#>".
+//config: If you wish to scrub the syslog level from the output, say 'Y' here.
+//config: The syslog level is a string prefixed to every line with the form
+//config: "<#>".
//config:
-//config: With this option you will see:
-//config: # dmesg
-//config: Linux version 2.6.17.4 .....
-//config: BIOS-provided physical RAM map:
-//config: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+//config: With this option you will see:
+//config: # dmesg
+//config: Linux version 2.6.17.4 .....
+//config: BIOS-provided physical RAM map:
+//config: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
//config:
-//config: Without this option you will see:
-//config: # dmesg
-//config: <5>Linux version 2.6.17.4 .....
-//config: <6>BIOS-provided physical RAM map:
-//config: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+//config: Without this option you will see:
+//config: # dmesg
+//config: <5>Linux version 2.6.17.4 .....
+//config: <6>BIOS-provided physical RAM map:
+//config: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
//applet:IF_DMESG(APPLET(dmesg, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/eject.c b/util-linux/eject.c
index 07ac2fd54..8095cbef0 100644
--- a/util-linux/eject.c
+++ b/util-linux/eject.c
@@ -17,15 +17,15 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Used to eject cdroms. (defaults to /dev/cdrom)
+//config: Used to eject cdroms. (defaults to /dev/cdrom)
//config:
//config:config FEATURE_EJECT_SCSI
//config: bool "SCSI support"
//config: default y
//config: depends on EJECT
//config: help
-//config: Add the -s option to eject, this allows to eject SCSI-Devices and
-//config: usb-storage devices.
+//config: Add the -s option to eject, this allows to eject SCSI-Devices and
+//config: usb-storage devices.
//applet:IF_EJECT(APPLET(eject, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/fallocate.c b/util-linux/fallocate.c
index 34f01ebd5..70e7e178f 100644
--- a/util-linux/fallocate.c
+++ b/util-linux/fallocate.c
@@ -9,7 +9,7 @@
//config: bool "fallocate (5 kb)"
//config: default y
//config: help
-//config: Preallocate space for files.
+//config: Preallocate space for files.
//applet:IF_FALLOCATE(APPLET(fallocate, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/fatattr.c b/util-linux/fatattr.c
index e69cb93e7..9fb566d5a 100644
--- a/util-linux/fatattr.c
+++ b/util-linux/fatattr.c
@@ -13,7 +13,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: fatattr lists or changes the file attributes on a fat file system.
+//config: fatattr lists or changes the file attributes on a fat file system.
//applet:IF_FATATTR(APPLET(fatattr, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/fbset.c b/util-linux/fbset.c
index 0b141816d..11cb20cb2 100644
--- a/util-linux/fbset.c
+++ b/util-linux/fbset.c
@@ -16,29 +16,29 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: fbset is used to show or change the settings of a Linux frame buffer
-//config: device. The frame buffer device provides a simple and unique
-//config: interface to access a graphics display. Enable this option
-//config: if you wish to enable the 'fbset' utility.
+//config: fbset is used to show or change the settings of a Linux frame buffer
+//config: device. The frame buffer device provides a simple and unique
+//config: interface to access a graphics display. Enable this option
+//config: if you wish to enable the 'fbset' utility.
//config:
//config:config FEATURE_FBSET_FANCY
//config: bool "Enable extra options"
//config: default y
//config: depends on FBSET
//config: help
-//config: This option enables extended fbset options, allowing one to set the
-//config: framebuffer size, color depth, etc. interface to access a graphics
-//config: display. Enable this option if you wish to enable extended fbset
-//config: options.
+//config: This option enables extended fbset options, allowing one to set the
+//config: framebuffer size, color depth, etc. interface to access a graphics
+//config: display. Enable this option if you wish to enable extended fbset
+//config: options.
//config:
//config:config FEATURE_FBSET_READMODE
//config: bool "Enable readmode support"
//config: default y
//config: depends on FBSET
//config: help
-//config: This option allows fbset to read the video mode database stored by
-//config: default as /etc/fb.modes, which can be used to set frame buffer
-//config: device to pre-defined video modes.
+//config: This option allows fbset to read the video mode database stored by
+//config: default as /etc/fb.modes, which can be used to set frame buffer
+//config: device to pre-defined video modes.
//applet:IF_FBSET(APPLET(fbset, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/fdformat.c b/util-linux/fdformat.c
index 62077ff3b..6faaf1b10 100644
--- a/util-linux/fdformat.c
+++ b/util-linux/fdformat.c
@@ -9,7 +9,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: fdformat is used to low-level format a floppy disk.
+//config: fdformat is used to low-level format a floppy disk.
//applet:IF_FDFORMAT(APPLET(fdformat, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/fdisk.c b/util-linux/fdisk.c
index c3784c28d..e00f85864 100644
--- a/util-linux/fdisk.c
+++ b/util-linux/fdisk.c
@@ -11,10 +11,10 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The fdisk utility is used to divide hard disks into one or more
-//config: logical disks, which are generally called partitions. This utility
-//config: can be used to list and edit the set of partitions or BSD style
-//config: 'disk slices' that are defined on a hard drive.
+//config: The fdisk utility is used to divide hard disks into one or more
+//config: logical disks, which are generally called partitions. This utility
+//config: can be used to list and edit the set of partitions or BSD style
+//config: 'disk slices' that are defined on a hard drive.
//config:
//config:config FDISK_SUPPORT_LARGE_DISKS
//config: bool "Support over 4GB disks"
@@ -27,59 +27,59 @@
//config: default y
//config: depends on FDISK
//config: help
-//config: Enabling this option allows you to create or change a partition table
-//config: and write those changes out to disk. If you leave this option
-//config: disabled, you will only be able to view the partition table.
+//config: Enabling this option allows you to create or change a partition table
+//config: and write those changes out to disk. If you leave this option
+//config: disabled, you will only be able to view the partition table.
//config:
//config:config FEATURE_AIX_LABEL
//config: bool "Support AIX disklabels"
//config: default n
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to create or change AIX disklabels.
-//config: Most people can safely leave this option disabled.
+//config: Enabling this option allows you to create or change AIX disklabels.
+//config: Most people can safely leave this option disabled.
//config:
//config:config FEATURE_SGI_LABEL
//config: bool "Support SGI disklabels"
//config: default n
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to create or change SGI disklabels.
-//config: Most people can safely leave this option disabled.
+//config: Enabling this option allows you to create or change SGI disklabels.
+//config: Most people can safely leave this option disabled.
//config:
//config:config FEATURE_SUN_LABEL
//config: bool "Support SUN disklabels"
//config: default n
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to create or change SUN disklabels.
-//config: Most people can safely leave this option disabled.
+//config: Enabling this option allows you to create or change SUN disklabels.
+//config: Most people can safely leave this option disabled.
//config:
//config:config FEATURE_OSF_LABEL
//config: bool "Support BSD disklabels"
//config: default n
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to create or change BSD disklabels
-//config: and define and edit BSD disk slices.
+//config: Enabling this option allows you to create or change BSD disklabels
+//config: and define and edit BSD disk slices.
//config:
//config:config FEATURE_GPT_LABEL
//config: bool "Support GPT disklabels"
//config: default n
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to view GUID Partition Table
-//config: disklabels.
+//config: Enabling this option allows you to view GUID Partition Table
+//config: disklabels.
//config:
//config:config FEATURE_FDISK_ADVANCED
//config: bool "Support expert mode"
//config: default y
//config: depends on FDISK && FEATURE_FDISK_WRITABLE
//config: help
-//config: Enabling this option allows you to do terribly unsafe things like
-//config: define arbitrary drive geometry, move the beginning of data in a
-//config: partition, and similarly evil things. Unless you have a very good
-//config: reason you would be wise to leave this disabled.
+//config: Enabling this option allows you to do terribly unsafe things like
+//config: define arbitrary drive geometry, move the beginning of data in a
+//config: partition, and similarly evil things. Unless you have a very good
+//config: reason you would be wise to leave this disabled.
//applet:IF_FDISK(APPLET(fdisk, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/findfs.c b/util-linux/findfs.c
index b9cd95687..359da581f 100644
--- a/util-linux/findfs.c
+++ b/util-linux/findfs.c
@@ -13,9 +13,9 @@
//config: select PLATFORM_LINUX
//config: select VOLUMEID
//config: help
-//config: Prints the name of a filesystem with given label or UUID.
-//config: WARNING:
-//config: With all submodules selected, it will add ~8k to busybox.
+//config: Prints the name of a filesystem with given label or UUID.
+//config: WARNING:
+//config: With all submodules selected, it will add ~8k to busybox.
/* Benefits from suid root: better access to /dev/BLOCKDEVs: */
//applet:IF_FINDFS(APPLET(findfs, BB_DIR_SBIN, BB_SUID_MAYBE))
diff --git a/util-linux/flock.c b/util-linux/flock.c
index e77718869..ec35af18f 100644
--- a/util-linux/flock.c
+++ b/util-linux/flock.c
@@ -7,7 +7,7 @@
//config: bool "flock (6.1 kb)"
//config: default y
//config: help
-//config: Manage locks from shell scripts
+//config: Manage locks from shell scripts
//applet:IF_FLOCK(APPLET(flock, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/freeramdisk.c b/util-linux/freeramdisk.c
index 0b8d2bc5b..55187cb40 100644
--- a/util-linux/freeramdisk.c
+++ b/util-linux/freeramdisk.c
@@ -13,25 +13,25 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: fdflush is only needed when changing media on slightly-broken
-//config: removable media drives. It is used to make Linux believe that a
-//config: hardware disk-change switch has been actuated, which causes Linux to
-//config: forget anything it has cached from the previous media. If you have
-//config: such a slightly-broken drive, you will need to run fdflush every time
-//config: you change a disk. Most people have working hardware and can safely
-//config: leave this disabled.
+//config: fdflush is only needed when changing media on slightly-broken
+//config: removable media drives. It is used to make Linux believe that a
+//config: hardware disk-change switch has been actuated, which causes Linux to
+//config: forget anything it has cached from the previous media. If you have
+//config: such a slightly-broken drive, you will need to run fdflush every time
+//config: you change a disk. Most people have working hardware and can safely
+//config: leave this disabled.
//config:
//config:config FREERAMDISK
//config: bool "freeramdisk (1.4 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Linux allows you to create ramdisks. This utility allows you to
-//config: delete them and completely free all memory that was used for the
-//config: ramdisk. For example, if you boot Linux into a ramdisk and later
-//config: pivot_root, you may want to free the memory that is allocated to the
-//config: ramdisk. If you have no use for freeing memory from a ramdisk, leave
-//config: this disabled.
+//config: Linux allows you to create ramdisks. This utility allows you to
+//config: delete them and completely free all memory that was used for the
+//config: ramdisk. For example, if you boot Linux into a ramdisk and later
+//config: pivot_root, you may want to free the memory that is allocated to the
+//config: ramdisk. If you have no use for freeing memory from a ramdisk, leave
+//config: this disabled.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_FDFLUSH(APPLET_ODDNAME(fdflush, freeramdisk, BB_DIR_BIN, BB_SUID_DROP, fdflush))
diff --git a/util-linux/fsck_minix.c b/util-linux/fsck_minix.c
index 2ab7530ea..8c2b7d8de 100644
--- a/util-linux/fsck_minix.c
+++ b/util-linux/fsck_minix.c
@@ -89,12 +89,12 @@
//config: bool "fsck_minix"
//config: default y
//config: help
-//config: The minix filesystem is a nice, small, compact, read-write filesystem
-//config: with little overhead. It is not a journaling filesystem however and
-//config: can experience corruption if it is not properly unmounted or if the
-//config: power goes off in the middle of a write. This utility allows you to
-//config: check for and attempt to repair any corruption that occurs to a minix
-//config: filesystem.
+//config: The minix filesystem is a nice, small, compact, read-write filesystem
+//config: with little overhead. It is not a journaling filesystem however and
+//config: can experience corruption if it is not properly unmounted or if the
+//config: power goes off in the middle of a write. This utility allows you to
+//config: check for and attempt to repair any corruption that occurs to a minix
+//config: filesystem.
//applet:IF_FSCK_MINIX(APPLET_ODDNAME(fsck.minix, fsck_minix, BB_DIR_SBIN, BB_SUID_DROP, fsck_minix))
diff --git a/util-linux/fsfreeze.c b/util-linux/fsfreeze.c
index 8bc4c471f..5c10c8044 100644
--- a/util-linux/fsfreeze.c
+++ b/util-linux/fsfreeze.c
@@ -11,7 +11,7 @@
//config: select PLATFORM_LINUX
//config: select LONG_OPTS
//config: help
-//config: Halt new accesses and flush writes on a mounted filesystem.
+//config: Halt new accesses and flush writes on a mounted filesystem.
//applet:IF_FSFREEZE(APPLET(fsfreeze, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/fstrim.c b/util-linux/fstrim.c
index c07da8a62..6d0d61d92 100644
--- a/util-linux/fstrim.c
+++ b/util-linux/fstrim.c
@@ -13,7 +13,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Discard unused blocks on a mounted filesystem.
+//config: Discard unused blocks on a mounted filesystem.
//applet:IF_FSTRIM(APPLET(fstrim, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/getopt.c b/util-linux/getopt.c
index 7c65a6a1f..cd5679cff 100644
--- a/util-linux/getopt.c
+++ b/util-linux/getopt.c
@@ -33,19 +33,19 @@
//config: bool "getopt (5.6 kb)"
//config: default y
//config: help
-//config: The getopt utility is used to break up (parse) options in command
-//config: lines to make it easy to write complex shell scripts that also check
-//config: for legal (and illegal) options. If you want to write horribly
-//config: complex shell scripts, or use some horribly complex shell script
-//config: written by others, this utility may be for you. Most people will
-//config: wisely leave this disabled.
+//config: The getopt utility is used to break up (parse) options in command
+//config: lines to make it easy to write complex shell scripts that also check
+//config: for legal (and illegal) options. If you want to write horribly
+//config: complex shell scripts, or use some horribly complex shell script
+//config: written by others, this utility may be for you. Most people will
+//config: wisely leave this disabled.
//config:
//config:config FEATURE_GETOPT_LONG
//config: bool "Support option -l"
//config: default y if LONG_OPTS
//config: depends on GETOPT
//config: help
-//config: Enable support for long options (option -l).
+//config: Enable support for long options (option -l).
//applet:IF_GETOPT(APPLET(getopt, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/hexdump.c b/util-linux/hexdump.c
index e8c0ee0f5..719feaf4e 100644
--- a/util-linux/hexdump.c
+++ b/util-linux/hexdump.c
@@ -12,24 +12,24 @@
//config: bool "hexdump (8.8 kb)"
//config: default y
//config: help
-//config: The hexdump utility is used to display binary data in a readable
-//config: way that is comparable to the output from most hex editors.
+//config: The hexdump utility is used to display binary data in a readable
+//config: way that is comparable to the output from most hex editors.
//config:
//config:config FEATURE_HEXDUMP_REVERSE
//config: bool "Support -R, reverse of 'hexdump -Cv'"
//config: default y
//config: depends on HEXDUMP
//config: help
-//config: The hexdump utility is used to display binary data in an ascii
-//config: readable way. This option creates binary data from an ascii input.
-//config: NB: this option is non-standard. It's unwise to use it in scripts
-//config: aimed to be portable.
+//config: The hexdump utility is used to display binary data in an ascii
+//config: readable way. This option creates binary data from an ascii input.
+//config: NB: this option is non-standard. It's unwise to use it in scripts
+//config: aimed to be portable.
//config:
//config:config HD
//config: bool "hd (8 kb)"
//config: default y
//config: help
-//config: hd is an alias to hexdump -C.
+//config: hd is an alias to hexdump -C.
//applet:IF_HEXDUMP(APPLET_NOEXEC(hexdump, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hexdump))
//applet:IF_HD(APPLET_NOEXEC(hd, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hd))
diff --git a/util-linux/hexdump_xxd.c b/util-linux/hexdump_xxd.c
index 5f72d3be4..37e58f2d0 100644
--- a/util-linux/hexdump_xxd.c
+++ b/util-linux/hexdump_xxd.c
@@ -10,8 +10,8 @@
//config: bool "xxd (8.9 kb)"
//config: default y
//config: help
-//config: The xxd utility is used to display binary data in a readable
-//config: way that is comparable to the output from most hex editors.
+//config: The xxd utility is used to display binary data in a readable
+//config: way that is comparable to the output from most hex editors.
//applet:IF_XXD(APPLET_NOEXEC(xxd, xxd, BB_DIR_USR_BIN, BB_SUID_DROP, xxd))
diff --git a/util-linux/hwclock.c b/util-linux/hwclock.c
index c2721dbac..5df56de15 100644
--- a/util-linux/hwclock.c
+++ b/util-linux/hwclock.c
@@ -11,10 +11,10 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The hwclock utility is used to read and set the hardware clock
-//config: on a system. This is primarily used to set the current time on
-//config: shutdown in the hardware clock, so the hardware will keep the
-//config: correct time when Linux is _not_ running.
+//config: The hwclock utility is used to read and set the hardware clock
+//config: on a system. This is primarily used to set the current time on
+//config: shutdown in the hardware clock, so the hardware will keep the
+//config: correct time when Linux is _not_ running.
//config:
//config:config FEATURE_HWCLOCK_LONG_OPTIONS
//config: bool "Support long options (--hctosys,...)"
@@ -26,12 +26,12 @@
//config: default n # util-linux-ng in Fedora 13 still uses /etc/adjtime
//config: depends on HWCLOCK
//config: help
-//config: Starting with FHS 2.3, the adjtime state file is supposed to exist
-//config: at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-//config: to use the FHS behavior, answer Y here, otherwise answer N for the
-//config: classic /etc/adjtime path.
+//config: Starting with FHS 2.3, the adjtime state file is supposed to exist
+//config: at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+//config: to use the FHS behavior, answer Y here, otherwise answer N for the
+//config: classic /etc/adjtime path.
//config:
-//config: pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+//config: pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
//applet:IF_HWCLOCK(APPLET(hwclock, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/ionice.c b/util-linux/ionice.c
index cda5a90d6..c7b7f0373 100644
--- a/util-linux/ionice.c
+++ b/util-linux/ionice.c
@@ -11,8 +11,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Set/set program io scheduling class and priority
-//config: Requires kernel >= 2.6.13
+//config: Set/set program io scheduling class and priority
+//config: Requires kernel >= 2.6.13
//applet:IF_IONICE(APPLET(ionice, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/ipcrm.c b/util-linux/ipcrm.c
index cabd8b9e7..c51d33143 100644
--- a/util-linux/ipcrm.c
+++ b/util-linux/ipcrm.c
@@ -11,9 +11,9 @@
//config: bool "ipcrm (2.9 kb)"
//config: default y
//config: help
-//config: The ipcrm utility allows the removal of System V interprocess
-//config: communication (IPC) objects and the associated data structures
-//config: from the system.
+//config: The ipcrm utility allows the removal of System V interprocess
+//config: communication (IPC) objects and the associated data structures
+//config: from the system.
//applet:IF_IPCRM(APPLET(ipcrm, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/ipcs.c b/util-linux/ipcs.c
index 0d5a16a2b..1404930d4 100644
--- a/util-linux/ipcs.c
+++ b/util-linux/ipcs.c
@@ -12,8 +12,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The ipcs utility is used to provide information on the currently
-//config: allocated System V interprocess (IPC) objects in the system.
+//config: The ipcs utility is used to provide information on the currently
+//config: allocated System V interprocess (IPC) objects in the system.
//applet:IF_IPCS(APPLET(ipcs, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/last.c b/util-linux/last.c
index 5bce85753..f5ee8e5f4 100644
--- a/util-linux/last.c
+++ b/util-linux/last.c
@@ -11,15 +11,15 @@
//config: default y
//config: depends on FEATURE_WTMP
//config: help
-//config: 'last' displays a list of the last users that logged into the system.
+//config: 'last' displays a list of the last users that logged into the system.
//config:
//config:config FEATURE_LAST_FANCY
//config: bool "Output extra information"
//config: default y
//config: depends on LAST
//config: help
-//config: 'last' displays detailed information about the last users that
-//config: logged into the system (mimics sysvinit last). +900 bytes.
+//config: 'last' displays detailed information about the last users that
+//config: logged into the system (mimics sysvinit last). +900 bytes.
//applet:IF_LAST(APPLET(last, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/losetup.c b/util-linux/losetup.c
index cbd1c6052..c608de6cc 100644
--- a/util-linux/losetup.c
+++ b/util-linux/losetup.c
@@ -11,9 +11,9 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: losetup is used to associate or detach a loop device with a regular
-//config: file or block device, and to query the status of a loop device. This
-//config: version does not currently support enabling data encryption.
+//config: losetup is used to associate or detach a loop device with a regular
+//config: file or block device, and to query the status of a loop device. This
+//config: version does not currently support enabling data encryption.
//kbuild:lib-$(CONFIG_LOSETUP) += losetup.o
diff --git a/util-linux/lspci.c b/util-linux/lspci.c
index c4f43bd12..3877deb67 100644
--- a/util-linux/lspci.c
+++ b/util-linux/lspci.c
@@ -11,10 +11,10 @@
//config: default y
//config: #select PLATFORM_LINUX
//config: help
-//config: lspci is a utility for displaying information about PCI buses in the
-//config: system and devices connected to them.
+//config: lspci is a utility for displaying information about PCI buses in the
+//config: system and devices connected to them.
//config:
-//config: This version uses sysfs (/sys/bus/pci/devices) only.
+//config: This version uses sysfs (/sys/bus/pci/devices) only.
//applet:IF_LSPCI(APPLET(lspci, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/lsusb.c b/util-linux/lsusb.c
index 9d12d8752..cabf047cf 100644
--- a/util-linux/lsusb.c
+++ b/util-linux/lsusb.c
@@ -11,10 +11,10 @@
//config: default y
//config: #select PLATFORM_LINUX
//config: help
-//config: lsusb is a utility for displaying information about USB buses in the
-//config: system and devices connected to them.
+//config: lsusb is a utility for displaying information about USB buses in the
+//config: system and devices connected to them.
//config:
-//config: This version uses sysfs (/sys/bus/usb/devices) only.
+//config: This version uses sysfs (/sys/bus/usb/devices) only.
//applet:IF_LSUSB(APPLET(lsusb, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/mdev.c b/util-linux/mdev.c
index a68e3f4e6..23b6f8285 100644
--- a/util-linux/mdev.c
+++ b/util-linux/mdev.c
@@ -13,58 +13,58 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: mdev is a mini-udev implementation for dynamically creating device
-//config: nodes in the /dev directory.
+//config: mdev is a mini-udev implementation for dynamically creating device
+//config: nodes in the /dev directory.
//config:
-//config: For more information, please see docs/mdev.txt
+//config: For more information, please see docs/mdev.txt
//config:
//config:config FEATURE_MDEV_CONF
//config: bool "Support /etc/mdev.conf"
//config: default y
//config: depends on MDEV
//config: help
-//config: Add support for the mdev config file to control ownership and
-//config: permissions of the device nodes.
+//config: Add support for the mdev config file to control ownership and
+//config: permissions of the device nodes.
//config:
-//config: For more information, please see docs/mdev.txt
+//config: For more information, please see docs/mdev.txt
//config:
//config:config FEATURE_MDEV_RENAME
//config: bool "Support subdirs/symlinks"
//config: default y
//config: depends on FEATURE_MDEV_CONF
//config: help
-//config: Add support for renaming devices and creating symlinks.
+//config: Add support for renaming devices and creating symlinks.
//config:
-//config: For more information, please see docs/mdev.txt
+//config: For more information, please see docs/mdev.txt
//config:
//config:config FEATURE_MDEV_RENAME_REGEXP
//config: bool "Support regular expressions substitutions when renaming device"
//config: default y
//config: depends on FEATURE_MDEV_RENAME
//config: help
-//config: Add support for regular expressions substitutions when renaming
-//config: device.
+//config: Add support for regular expressions substitutions when renaming
+//config: device.
//config:
//config:config FEATURE_MDEV_EXEC
//config: bool "Support command execution at device addition/removal"
//config: default y
//config: depends on FEATURE_MDEV_CONF
//config: help
-//config: This adds support for an optional field to /etc/mdev.conf for
-//config: executing commands when devices are created/removed.
+//config: This adds support for an optional field to /etc/mdev.conf for
+//config: executing commands when devices are created/removed.
//config:
-//config: For more information, please see docs/mdev.txt
+//config: For more information, please see docs/mdev.txt
//config:
//config:config FEATURE_MDEV_LOAD_FIRMWARE
//config: bool "Support loading of firmwares"
//config: default y
//config: depends on MDEV
//config: help
-//config: Some devices need to load firmware before they can be usable.
+//config: Some devices need to load firmware before they can be usable.
//config:
-//config: These devices will request userspace look up the files in
-//config: /lib/firmware/ and if it exists, send it to the kernel for
-//config: loading into the hardware.
+//config: These devices will request userspace look up the files in
+//config: /lib/firmware/ and if it exists, send it to the kernel for
+//config: loading into the hardware.
//applet:IF_MDEV(APPLET(mdev, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/mesg.c b/util-linux/mesg.c
index a83da03e6..c4371eb24 100644
--- a/util-linux/mesg.c
+++ b/util-linux/mesg.c
@@ -11,20 +11,20 @@
//config: bool "mesg (1.2 kb)"
//config: default y
//config: help
-//config: Mesg controls access to your terminal by others. It is typically
-//config: used to allow or disallow other users to write to your terminal
+//config: Mesg controls access to your terminal by others. It is typically
+//config: used to allow or disallow other users to write to your terminal
//config:
//config:config FEATURE_MESG_ENABLE_ONLY_GROUP
//config: bool "Enable writing to tty only by group, not by everybody"
//config: default y
//config: depends on MESG
//config: help
-//config: Usually, ttys are owned by group "tty", and "write" tool is
-//config: setgid to this group. This way, "mesg y" only needs to enable
-//config: "write by owning group" bit in tty mode.
+//config: Usually, ttys are owned by group "tty", and "write" tool is
+//config: setgid to this group. This way, "mesg y" only needs to enable
+//config: "write by owning group" bit in tty mode.
//config:
-//config: If you set this option to N, "mesg y" will enable writing
-//config: by anybody at all. This is not recommended.
+//config: If you set this option to N, "mesg y" will enable writing
+//config: by anybody at all. This is not recommended.
//applet:IF_MESG(APPLET(mesg, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/mkfs_ext2.c b/util-linux/mkfs_ext2.c
index f646f368c..8434dd6ad 100644
--- a/util-linux/mkfs_ext2.c
+++ b/util-linux/mkfs_ext2.c
@@ -12,14 +12,14 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Utility to create EXT2 filesystems.
+//config: Utility to create EXT2 filesystems.
//config:
//config:config MKFS_EXT2
//config: bool "mkfs.ext2 (9.8 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Alias to "mke2fs".
+//config: Alias to "mke2fs".
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_MKE2FS( APPLET_ODDNAME(mke2fs, mkfs_ext2, BB_DIR_SBIN, BB_SUID_DROP, mkfs_ext2))
diff --git a/util-linux/mkfs_minix.c b/util-linux/mkfs_minix.c
index 0dfe34705..88647e9d8 100644
--- a/util-linux/mkfs_minix.c
+++ b/util-linux/mkfs_minix.c
@@ -67,18 +67,18 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The minix filesystem is a nice, small, compact, read-write filesystem
-//config: with little overhead. If you wish to be able to create minix
-//config: filesystems this utility will do the job for you.
+//config: The minix filesystem is a nice, small, compact, read-write filesystem
+//config: with little overhead. If you wish to be able to create minix
+//config: filesystems this utility will do the job for you.
//config:
//config:config FEATURE_MINIX2
//config: bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
//config: default y
//config: depends on FSCK_MINIX || MKFS_MINIX
//config: help
-//config: If you wish to be able to create version 2 minix filesystems, enable
-//config: this. If you enabled 'mkfs_minix' then you almost certainly want to
-//config: be using the version 2 filesystem support.
+//config: If you wish to be able to create version 2 minix filesystems, enable
+//config: this. If you enabled 'mkfs_minix' then you almost certainly want to
+//config: be using the version 2 filesystem support.
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_MKFS_MINIX(APPLET_ODDNAME(mkfs.minix, mkfs_minix, BB_DIR_SBIN, BB_SUID_DROP, mkfs_minix))
diff --git a/util-linux/mkfs_reiser.c b/util-linux/mkfs_reiser.c
index d01119f7f..c7d99b018 100644
--- a/util-linux/mkfs_reiser.c
+++ b/util-linux/mkfs_reiser.c
@@ -11,8 +11,8 @@
//config: default n
//config: select PLATFORM_LINUX
//config: help
-//config: Utility to create ReiserFS filesystems.
-//config: Note: this applet needs a lot of testing and polishing.
+//config: Utility to create ReiserFS filesystems.
+//config: Note: this applet needs a lot of testing and polishing.
//applet:IF_MKFS_REISER(APPLET_ODDNAME(mkfs.reiser, mkfs_reiser, BB_DIR_SBIN, BB_SUID_DROP, mkfs_reiser))
diff --git a/util-linux/mkfs_vfat.c b/util-linux/mkfs_vfat.c
index a191c03d6..f9768ed56 100644
--- a/util-linux/mkfs_vfat.c
+++ b/util-linux/mkfs_vfat.c
@@ -12,14 +12,14 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Utility to create FAT32 filesystems.
+//config: Utility to create FAT32 filesystems.
//config:
//config:config MKFS_VFAT
//config: bool "mkfs.vfat (6.8 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Alias to "mkdosfs".
+//config: Alias to "mkdosfs".
// APPLET_ODDNAME:name main location suid_type help
//applet:IF_MKDOSFS( APPLET_ODDNAME(mkdosfs, mkfs_vfat, BB_DIR_SBIN, BB_SUID_DROP, mkfs_vfat))
diff --git a/util-linux/mkswap.c b/util-linux/mkswap.c
index deb911485..e44e13c0d 100644
--- a/util-linux/mkswap.c
+++ b/util-linux/mkswap.c
@@ -9,21 +9,21 @@
//config: bool "mkswap (5.8 kb)"
//config: default y
//config: help
-//config: The mkswap utility is used to configure a file or disk partition as
-//config: Linux swap space. This allows Linux to use the entire file or
-//config: partition as if it were additional RAM, which can greatly increase
-//config: the capability of low-memory machines. This additional memory is
-//config: much slower than real RAM, but can be very helpful at preventing your
-//config: applications being killed by the Linux out of memory (OOM) killer.
-//config: Once you have created swap space using 'mkswap' you need to enable
-//config: the swap space using the 'swapon' utility.
+//config: The mkswap utility is used to configure a file or disk partition as
+//config: Linux swap space. This allows Linux to use the entire file or
+//config: partition as if it were additional RAM, which can greatly increase
+//config: the capability of low-memory machines. This additional memory is
+//config: much slower than real RAM, but can be very helpful at preventing your
+//config: applications being killed by the Linux out of memory (OOM) killer.
+//config: Once you have created swap space using 'mkswap' you need to enable
+//config: the swap space using the 'swapon' utility.
//config:
//config:config FEATURE_MKSWAP_UUID
//config: bool "UUID support"
//config: default y
//config: depends on MKSWAP
//config: help
-//config: Generate swap spaces with universally unique identifiers.
+//config: Generate swap spaces with universally unique identifiers.
//applet:IF_MKSWAP(APPLET(mkswap, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/more.c b/util-linux/more.c
index 11546a8f8..926cf5f26 100644
--- a/util-linux/more.c
+++ b/util-linux/more.c
@@ -17,11 +17,11 @@
//config: bool "more (6.7 kb)"
//config: default y
//config: help
-//config: more is a simple utility which allows you to read text one screen
-//config: sized page at a time. If you want to read text that is larger than
-//config: the screen, and you are using anything faster than a 300 baud modem,
-//config: you will probably find this utility very helpful. If you don't have
-//config: any need to reading text files, you can leave this disabled.
+//config: more is a simple utility which allows you to read text one screen
+//config: sized page at a time. If you want to read text that is larger than
+//config: the screen, and you are using anything faster than a 300 baud modem,
+//config: you will probably find this utility very helpful. If you don't have
+//config: any need to reading text files, you can leave this disabled.
//applet:IF_MORE(APPLET(more, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/mount.c b/util-linux/mount.c
index 423e89d5b..1a39da2db 100644
--- a/util-linux/mount.c
+++ b/util-linux/mount.c
@@ -22,40 +22,40 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: All files and filesystems in Unix are arranged into one big directory
-//config: tree. The 'mount' utility is used to graft a filesystem onto a
-//config: particular part of the tree. A filesystem can either live on a block
-//config: device, or it can be accessible over the network, as is the case with
-//config: NFS filesystems. Most people using BusyBox will also want to enable
-//config: the 'mount' utility.
+//config: All files and filesystems in Unix are arranged into one big directory
+//config: tree. The 'mount' utility is used to graft a filesystem onto a
+//config: particular part of the tree. A filesystem can either live on a block
+//config: device, or it can be accessible over the network, as is the case with
+//config: NFS filesystems. Most people using BusyBox will also want to enable
+//config: the 'mount' utility.
//config:
//config:config FEATURE_MOUNT_FAKE
//config: bool "Support option -f"
//config: default y
//config: depends on MOUNT
//config: help
-//config: Enable support for faking a file system mount.
+//config: Enable support for faking a file system mount.
//config:
//config:config FEATURE_MOUNT_VERBOSE
//config: bool "Support option -v"
//config: default y
//config: depends on MOUNT
//config: help
-//config: Enable multi-level -v[vv...] verbose messages. Useful if you
-//config: debug mount problems and want to see what is exactly passed
-//config: to the kernel.
+//config: Enable multi-level -v[vv...] verbose messages. Useful if you
+//config: debug mount problems and want to see what is exactly passed
+//config: to the kernel.
//config:
//config:config FEATURE_MOUNT_HELPERS
//config: bool "Support mount helpers"
//config: default n
//config: depends on MOUNT
//config: help
-//config: Enable mounting of virtual file systems via external helpers.
-//config: E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-//config: "obexfs -b00.11.22.33.44.55 /mnt"
-//config: Also "mount -t sometype [-o opts] fs /mnt" will try
-//config: "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-//config: The idea is to use such virtual filesystems in /etc/fstab.
+//config: Enable mounting of virtual file systems via external helpers.
+//config: E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+//config: "obexfs -b00.11.22.33.44.55 /mnt"
+//config: Also "mount -t sometype [-o opts] fs /mnt" will try
+//config: "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+//config: The idea is to use such virtual filesystems in /etc/fstab.
//config:
//config:config FEATURE_MOUNT_LABEL
//config: bool "Support specifying devices by label or UUID"
@@ -63,9 +63,9 @@
//config: depends on MOUNT
//config: select VOLUMEID
//config: help
-//config: This allows for specifying a device by label or uuid, rather than by
-//config: name. This feature utilizes the same functionality as blkid/findfs.
-//config: This also enables label or uuid support for swapon.
+//config: This allows for specifying a device by label or uuid, rather than by
+//config: name. This feature utilizes the same functionality as blkid/findfs.
+//config: This also enables label or uuid support for swapon.
//config:
//config:config FEATURE_MOUNT_NFS
//config: bool "Support mounting NFS file systems on Linux < 2.6.23"
@@ -74,43 +74,43 @@
//config: select FEATURE_HAVE_RPC
//config: select FEATURE_SYSLOG
//config: help
-//config: Enable mounting of NFS file systems on Linux kernels prior
-//config: to version 2.6.23. Note that in this case mounting of NFS
-//config: over IPv6 will not be possible.
+//config: Enable mounting of NFS file systems on Linux kernels prior
+//config: to version 2.6.23. Note that in this case mounting of NFS
+//config: over IPv6 will not be possible.
//config:
-//config: Note that this option links in RPC support from libc,
-//config: which is rather large (~10 kbytes on uclibc).
+//config: Note that this option links in RPC support from libc,
+//config: which is rather large (~10 kbytes on uclibc).
//config:
//config:config FEATURE_MOUNT_CIFS
//config: bool "Support mounting CIFS/SMB file systems"
//config: default y
//config: depends on MOUNT
//config: help
-//config: Enable support for samba mounts.
+//config: Enable support for samba mounts.
//config:
//config:config FEATURE_MOUNT_FLAGS
//config: depends on MOUNT
//config: bool "Support lots of -o flags"
//config: default y
//config: help
-//config: Without this, mount only supports ro/rw/remount. With this, it
-//config: supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-//config: noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-//config: private, unbindable, rshared, rslave, rprivate, and runbindable.
+//config: Without this, mount only supports ro/rw/remount. With this, it
+//config: supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+//config: noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+//config: private, unbindable, rshared, rslave, rprivate, and runbindable.
//config:
//config:config FEATURE_MOUNT_FSTAB
//config: depends on MOUNT
//config: bool "Support /etc/fstab and -a"
//config: default y
//config: help
-//config: Support mount all and looking for files in /etc/fstab.
+//config: Support mount all and looking for files in /etc/fstab.
//config:
//config:config FEATURE_MOUNT_OTHERTAB
//config: depends on FEATURE_MOUNT_FSTAB
//config: bool "Support -T <alt_fstab>"
//config: default y
//config: help
-//config: Support mount -T (specifying an alternate fstab)
+//config: Support mount -T (specifying an alternate fstab)
/* On full-blown systems, requires suid for user mounts.
* But it's not unthinkable to have it available in non-suid flavor on some systems,
diff --git a/util-linux/mountpoint.c b/util-linux/mountpoint.c
index 0ba4a308e..b7f048196 100644
--- a/util-linux/mountpoint.c
+++ b/util-linux/mountpoint.c
@@ -12,7 +12,7 @@
//config: bool "mountpoint (4.5 kb)"
//config: default y
//config: help
-//config: mountpoint checks if the directory is a mountpoint.
+//config: mountpoint checks if the directory is a mountpoint.
//applet:IF_MOUNTPOINT(APPLET(mountpoint, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/nsenter.c b/util-linux/nsenter.c
index 315e3420b..12c86b0ed 100644
--- a/util-linux/nsenter.c
+++ b/util-linux/nsenter.c
@@ -12,15 +12,15 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Run program with namespaces of other processes.
+//config: Run program with namespaces of other processes.
//config:
//config:config FEATURE_NSENTER_LONG_OPTS
//config: bool "Enable long options"
//config: default y
//config: depends on NSENTER && LONG_OPTS
//config: help
-//config: Support long options for the nsenter applet. This makes
-//config: the busybox implementation more compatible with upstream.
+//config: Support long options for the nsenter applet. This makes
+//config: the busybox implementation more compatible with upstream.
//applet:IF_NSENTER(APPLET(nsenter, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/pivot_root.c b/util-linux/pivot_root.c
index c21291ba0..331038057 100644
--- a/util-linux/pivot_root.c
+++ b/util-linux/pivot_root.c
@@ -13,13 +13,13 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The pivot_root utility swaps the mount points for the root filesystem
-//config: with some other mounted filesystem. This allows you to do all sorts
-//config: of wild and crazy things with your Linux system and is far more
-//config: powerful than 'chroot'.
+//config: The pivot_root utility swaps the mount points for the root filesystem
+//config: with some other mounted filesystem. This allows you to do all sorts
+//config: of wild and crazy things with your Linux system and is far more
+//config: powerful than 'chroot'.
//config:
-//config: Note: This is for initrd in linux 2.4. Under initramfs (introduced
-//config: in linux 2.6) use switch_root instead.
+//config: Note: This is for initrd in linux 2.4. Under initramfs (introduced
+//config: in linux 2.6) use switch_root instead.
//applet:IF_PIVOT_ROOT(APPLET(pivot_root, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/rdate.c b/util-linux/rdate.c
index d950b45b5..66b877e24 100644
--- a/util-linux/rdate.c
+++ b/util-linux/rdate.c
@@ -11,10 +11,10 @@
//config: bool "rdate (6 kb)"
//config: default y
//config: help
-//config: The rdate utility allows you to synchronize the date and time of your
-//config: system clock with the date and time of a remote networked system using
-//config: the RFC868 protocol, which is built into the inetd daemon on most
-//config: systems.
+//config: The rdate utility allows you to synchronize the date and time of your
+//config: system clock with the date and time of a remote networked system using
+//config: the RFC868 protocol, which is built into the inetd daemon on most
+//config: systems.
//applet:IF_RDATE(APPLET(rdate, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/rdev.c b/util-linux/rdev.c
index 6ea9c2a8a..2ffe07688 100644
--- a/util-linux/rdev.c
+++ b/util-linux/rdev.c
@@ -12,7 +12,7 @@
//config: bool "rdev (1.4 kb)"
//config: default y
//config: help
-//config: Print the device node associated with the filesystem mounted at '/'.
+//config: Print the device node associated with the filesystem mounted at '/'.
//applet:IF_RDEV(APPLET(rdev, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/readprofile.c b/util-linux/readprofile.c
index b4cb5804f..b045657d8 100644
--- a/util-linux/readprofile.c
+++ b/util-linux/readprofile.c
@@ -36,7 +36,7 @@
//config: default y
//config: #select PLATFORM_LINUX
//config: help
-//config: This allows you to parse /proc/profile for basic profiling.
+//config: This allows you to parse /proc/profile for basic profiling.
//applet:IF_READPROFILE(APPLET(readprofile, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/renice.c b/util-linux/renice.c
index 751af4548..23cbca88d 100644
--- a/util-linux/renice.c
+++ b/util-linux/renice.c
@@ -22,8 +22,8 @@
//config: bool "renice (3.8 kb)"
//config: default y
//config: help
-//config: Renice alters the scheduling priority of one or more running
-//config: processes.
+//config: Renice alters the scheduling priority of one or more running
+//config: processes.
//applet:IF_RENICE(APPLET(renice, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/rev.c b/util-linux/rev.c
index 3d07b2247..2bef9b9be 100644
--- a/util-linux/rev.c
+++ b/util-linux/rev.c
@@ -9,7 +9,7 @@
//config: bool "rev (4.5 kb)"
//config: default y
//config: help
-//config: Reverse lines of a file or files.
+//config: Reverse lines of a file or files.
//applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/rtcwake.c b/util-linux/rtcwake.c
index 01ab8ebb9..4c47c5369 100644
--- a/util-linux/rtcwake.c
+++ b/util-linux/rtcwake.c
@@ -27,7 +27,7 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Enter a system sleep state until specified wakeup time.
+//config: Enter a system sleep state until specified wakeup time.
//applet:IF_RTCWAKE(APPLET(rtcwake, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/script.c b/util-linux/script.c
index d82a92d1e..9eebb51a4 100644
--- a/util-linux/script.c
+++ b/util-linux/script.c
@@ -14,7 +14,7 @@
//config: bool "script (8 kb)"
//config: default y
//config: help
-//config: The script makes typescript of terminal session.
+//config: The script makes typescript of terminal session.
//applet:IF_SCRIPT(APPLET(script, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/scriptreplay.c b/util-linux/scriptreplay.c
index d0050f26b..7e9850103 100644
--- a/util-linux/scriptreplay.c
+++ b/util-linux/scriptreplay.c
@@ -11,8 +11,8 @@
//config: bool "scriptreplay (2.6 kb)"
//config: default y
//config: help
-//config: This program replays a typescript, using timing information
-//config: given by script -t.
+//config: This program replays a typescript, using timing information
+//config: given by script -t.
//applet:IF_SCRIPTREPLAY(APPLET(scriptreplay, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/setarch.c b/util-linux/setarch.c
index 07de7f4db..d4b568832 100644
--- a/util-linux/setarch.c
+++ b/util-linux/setarch.c
@@ -11,24 +11,24 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The linux32 utility is used to create a 32bit environment for the
-//config: specified program (usually a shell). It only makes sense to have
-//config: this util on a system that supports both 64bit and 32bit userland
-//config: (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+//config: The linux32 utility is used to create a 32bit environment for the
+//config: specified program (usually a shell). It only makes sense to have
+//config: this util on a system that supports both 64bit and 32bit userland
+//config: (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
//config:
//config:config LINUX32
//config: bool "linux32 (3.2 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Alias to "setarch linux32".
+//config: Alias to "setarch linux32".
//config:
//config:config LINUX64
//config: bool "linux64 (3.2 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Alias to "setarch linux64".
+//config: Alias to "setarch linux64".
//applet:IF_SETARCH(APPLET(setarch, BB_DIR_BIN, BB_SUID_DROP))
// APPLET_ODDNAME:name main location suid_type help
diff --git a/util-linux/setpriv.c b/util-linux/setpriv.c
index 89181085a..0f85428ab 100644
--- a/util-linux/setpriv.c
+++ b/util-linux/setpriv.c
@@ -13,36 +13,36 @@
//config: select PLATFORM_LINUX
//config: select LONG_OPTS
//config: help
-//config: Run a program with different Linux privilege settings.
-//config: Requires kernel >= 3.5
+//config: Run a program with different Linux privilege settings.
+//config: Requires kernel >= 3.5
//config:
//config:config FEATURE_SETPRIV_DUMP
//config: bool "Support dumping current privilege state"
//config: default y
//config: depends on SETPRIV
//config: help
-//config: Enables the "--dump" switch to print out the current privilege
-//config: state. This is helpful for diagnosing problems.
+//config: Enables the "--dump" switch to print out the current privilege
+//config: state. This is helpful for diagnosing problems.
//config:
//config:config FEATURE_SETPRIV_CAPABILITIES
//config: bool "Support capabilities"
//config: default y
//config: depends on SETPRIV
//config: help
-//config: Capabilities can be used to grant processes additional rights
-//config: without the necessity to always execute as the root user.
-//config: Enabling this option enables "--dump" to show information on
-//config: capabilities.
+//config: Capabilities can be used to grant processes additional rights
+//config: without the necessity to always execute as the root user.
+//config: Enabling this option enables "--dump" to show information on
+//config: capabilities.
//config:
//config:config FEATURE_SETPRIV_CAPABILITY_NAMES
//config: bool "Support capability names"
//config: default y
//config: depends on SETPRIV && FEATURE_SETPRIV_CAPABILITIES
//config: help
-//config: Capabilities can be either referenced via a human-readble name,
-//config: e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
-//config: this option allows using the human-readable names in addition to
-//config: the index-based names.
+//config: Capabilities can be either referenced via a human-readble name,
+//config: e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
+//config: this option allows using the human-readable names in addition to
+//config: the index-based names.
//applet:IF_SETPRIV(APPLET(setpriv, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/setsid.c b/util-linux/setsid.c
index 15a7c05e9..60cab2fcf 100644
--- a/util-linux/setsid.c
+++ b/util-linux/setsid.c
@@ -17,7 +17,7 @@
//config: bool "setsid (3.9 kb)"
//config: default y
//config: help
-//config: setsid runs a program in a new session
+//config: setsid runs a program in a new session
//applet:IF_SETSID(APPLET(setsid, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/swaponoff.c b/util-linux/swaponoff.c
index dc8dd9df6..bda0687d6 100644
--- a/util-linux/swaponoff.c
+++ b/util-linux/swaponoff.c
@@ -11,27 +11,27 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: Once you have created some swap space using 'mkswap', you also need
-//config: to enable your swap space with the 'swapon' utility. The 'swapoff'
-//config: utility is used, typically at system shutdown, to disable any swap
-//config: space. If you are not using any swap space, you can leave this
-//config: option disabled.
+//config: Once you have created some swap space using 'mkswap', you also need
+//config: to enable your swap space with the 'swapon' utility. The 'swapoff'
+//config: utility is used, typically at system shutdown, to disable any swap
+//config: space. If you are not using any swap space, you can leave this
+//config: option disabled.
//config:
//config:config FEATURE_SWAPON_DISCARD
//config: bool "Support discard option -d"
//config: default y
//config: depends on SWAPON
//config: help
-//config: Enable support for discarding swap area blocks at swapon and/or as
-//config: the kernel frees them. This option enables both the -d option on
-//config: 'swapon' and the 'discard' option for swap entries in /etc/fstab.
+//config: Enable support for discarding swap area blocks at swapon and/or as
+//config: the kernel frees them. This option enables both the -d option on
+//config: 'swapon' and the 'discard' option for swap entries in /etc/fstab.
//config:
//config:config FEATURE_SWAPON_PRI
//config: bool "Support priority option -p"
//config: default y
//config: depends on SWAPON
//config: help
-//config: Enable support for setting swap device priority in swapon.
+//config: Enable support for setting swap device priority in swapon.
//config:
//config:config SWAPOFF
//config: bool "swapoff (4.3 kb)"
diff --git a/util-linux/switch_root.c b/util-linux/switch_root.c
index 92e385b98..32708934e 100644
--- a/util-linux/switch_root.c
+++ b/util-linux/switch_root.c
@@ -10,20 +10,20 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: The switch_root utility is used from initramfs to select a new
-//config: root device. Under initramfs, you have to use this instead of
-//config: pivot_root. (Stop reading here if you don't care why.)
+//config: The switch_root utility is used from initramfs to select a new
+//config: root device. Under initramfs, you have to use this instead of
+//config: pivot_root. (Stop reading here if you don't care why.)
//config:
-//config: Booting with initramfs extracts a gzipped cpio archive into rootfs
-//config: (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-//config: or unmounted*, pivot_root will not work from initramfs. Instead,
-//config: switch_root deletes everything out of rootfs (including itself),
-//config: does a mount --move that overmounts rootfs with the new root, and
-//config: then execs the specified init program.
+//config: Booting with initramfs extracts a gzipped cpio archive into rootfs
+//config: (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+//config: or unmounted*, pivot_root will not work from initramfs. Instead,
+//config: switch_root deletes everything out of rootfs (including itself),
+//config: does a mount --move that overmounts rootfs with the new root, and
+//config: then execs the specified init program.
//config:
-//config: * Because the Linux kernel uses rootfs internally as the starting
-//config: and ending point for searching through the kernel's doubly linked
-//config: list of active mount points. That's why.
+//config: * Because the Linux kernel uses rootfs internally as the starting
+//config: and ending point for searching through the kernel's doubly linked
+//config: list of active mount points. That's why.
//applet:IF_SWITCH_ROOT(APPLET(switch_root, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/taskset.c b/util-linux/taskset.c
index 581b0d144..9957b1a71 100644
--- a/util-linux/taskset.c
+++ b/util-linux/taskset.c
@@ -10,17 +10,17 @@
//config: bool "taskset (4.1 kb)"
//config: default y
//config: help
-//config: Retrieve or set a processes's CPU affinity.
-//config: This requires sched_{g,s}etaffinity support in your libc.
+//config: Retrieve or set a processes's CPU affinity.
+//config: This requires sched_{g,s}etaffinity support in your libc.
//config:
//config:config FEATURE_TASKSET_FANCY
//config: bool "Fancy output"
//config: default y
//config: depends on TASKSET
//config: help
-//config: Needed for machines with more than 32-64 CPUs:
-//config: affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
-//config: in this case. Otherwise, it is limited to sizeof(long).
+//config: Needed for machines with more than 32-64 CPUs:
+//config: affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+//config: in this case. Otherwise, it is limited to sizeof(long).
//applet:IF_TASKSET(APPLET(taskset, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_TASKSET) += taskset.o
diff --git a/util-linux/uevent.c b/util-linux/uevent.c
index cef93adf6..252e8fb64 100644
--- a/util-linux/uevent.c
+++ b/util-linux/uevent.c
@@ -8,8 +8,8 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: uevent is a netlink listener for kernel uevent notifications
-//config: sent via netlink. It is usually used for dynamic device creation.
+//config: uevent is a netlink listener for kernel uevent notifications
+//config: sent via netlink. It is usually used for dynamic device creation.
//applet:IF_UEVENT(APPLET(uevent, BB_DIR_SBIN, BB_SUID_DROP))
diff --git a/util-linux/umount.c b/util-linux/umount.c
index f970f9f84..31bf671c1 100644
--- a/util-linux/umount.c
+++ b/util-linux/umount.c
@@ -12,17 +12,17 @@
//config: default y
//config: select PLATFORM_LINUX
//config: help
-//config: When you want to remove a mounted filesystem from its current mount
-//config: point, for example when you are shutting down the system, the
-//config: 'umount' utility is the tool to use. If you enabled the 'mount'
-//config: utility, you almost certainly also want to enable 'umount'.
+//config: When you want to remove a mounted filesystem from its current mount
+//config: point, for example when you are shutting down the system, the
+//config: 'umount' utility is the tool to use. If you enabled the 'mount'
+//config: utility, you almost certainly also want to enable 'umount'.
//config:
//config:config FEATURE_UMOUNT_ALL
//config: bool "Support option -a"
//config: default y
//config: depends on UMOUNT
//config: help
-//config: Support -a option to unmount all currently mounted filesystems.
+//config: Support -a option to unmount all currently mounted filesystems.
//applet:IF_UMOUNT(APPLET(umount, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/util-linux/unshare.c b/util-linux/unshare.c
index 892d3b6c7..e7b95c72b 100644
--- a/util-linux/unshare.c
+++ b/util-linux/unshare.c
@@ -13,7 +13,7 @@
//config: select PLATFORM_LINUX
//config: select LONG_OPTS
//config: help
-//config: Run program with some namespaces unshared from parent.
+//config: Run program with some namespaces unshared from parent.
// needs LONG_OPTS: it is awkward to exclude code which handles --propagation
// and --setgroups based on LONG_OPTS, so instead applet requires LONG_OPTS.
diff --git a/util-linux/volume_id/exfat.c b/util-linux/volume_id/exfat.c
index 7ed13a70e..14bf9d691 100644
--- a/util-linux/volume_id/exfat.c
+++ b/util-linux/volume_id/exfat.c
@@ -25,9 +25,9 @@
//config: default y
//config: depends on VOLUMEID
//config: help
-//config: exFAT (extended FAT) is a proprietary file system designed especially
-//config: for flash drives. It has many features from NTFS, but with less
-//config: overhead. exFAT is used on most SDXC cards for consumer electronics.
+//config: exFAT (extended FAT) is a proprietary file system designed especially
+//config: for flash drives. It has many features from NTFS, but with less
+//config: overhead. exFAT is used on most SDXC cards for consumer electronics.
#include "volume_id_internal.h"
diff --git a/util-linux/volume_id/f2fs.c b/util-linux/volume_id/f2fs.c
index 1d3bdae36..3027f178e 100644
--- a/util-linux/volume_id/f2fs.c
+++ b/util-linux/volume_id/f2fs.c
@@ -13,10 +13,10 @@
//config: default y
//config: depends on VOLUMEID
//config: help
-//config: F2FS (aka Flash-Friendly File System) is a log-structured file system,
-//config: which is adapted to newer forms of storage. F2FS also remedies some
-//config: known issues of the older log structured file systems, such as high
-//config: cleaning overhead.
+//config: F2FS (aka Flash-Friendly File System) is a log-structured file system,
+//config: which is adapted to newer forms of storage. F2FS also remedies some
+//config: known issues of the older log structured file systems, such as high
+//config: cleaning overhead.
#include "volume_id_internal.h"
diff --git a/util-linux/volume_id/nilfs.c b/util-linux/volume_id/nilfs.c
index ffe919f36..9d6c57fba 100644
--- a/util-linux/volume_id/nilfs.c
+++ b/util-linux/volume_id/nilfs.c
@@ -26,16 +26,16 @@
//config: default y
//config: depends on VOLUMEID
//config: help
-//config: NILFS is a New Implementation of a Log-Structured File System (LFS)
-//config: that supports continuous snapshots. This provides features like
-//config: versioning of the entire filesystem, restoration of files that
-//config: were deleted a few minutes ago. NILFS keeps consistency like
-//config: conventional LFS, so it provides quick recovery after system crashes.
+//config: NILFS is a New Implementation of a Log-Structured File System (LFS)
+//config: that supports continuous snapshots. This provides features like
+//config: versioning of the entire filesystem, restoration of files that
+//config: were deleted a few minutes ago. NILFS keeps consistency like
+//config: conventional LFS, so it provides quick recovery after system crashes.
//config:
-//config: The possible use of NILFS includes versioning, tamper detection,
-//config: SOX compliance logging, and so forth. It can serve as an alternative
-//config: filesystem for Linux desktop environment, or as a basis of advanced
-//config: storage appliances.
+//config: The possible use of NILFS includes versioning, tamper detection,
+//config: SOX compliance logging, and so forth. It can serve as an alternative
+//config: filesystem for Linux desktop environment, or as a basis of advanced
+//config: storage appliances.
#include "volume_id_internal.h"
diff --git a/util-linux/volume_id/squashfs.c b/util-linux/volume_id/squashfs.c
index 6bba199cd..e3ffce35e 100644
--- a/util-linux/volume_id/squashfs.c
+++ b/util-linux/volume_id/squashfs.c
@@ -13,10 +13,10 @@
//config: default y
//config: depends on VOLUMEID && FEATURE_BLKID_TYPE
//config: help
-//config: Squashfs is a compressed read-only filesystem for Linux. Squashfs is
-//config: intended for general read-only filesystem use and in constrained block
-//config: device/memory systems (e.g. embedded systems) where low overhead is
-//config: needed.
+//config: Squashfs is a compressed read-only filesystem for Linux. Squashfs is
+//config: intended for general read-only filesystem use and in constrained block
+//config: device/memory systems (e.g. embedded systems) where low overhead is
+//config: needed.
#include "volume_id_internal.h"
diff --git a/util-linux/volume_id/ubifs.c b/util-linux/volume_id/ubifs.c
index 99b0aa830..7512b84b0 100644
--- a/util-linux/volume_id/ubifs.c
+++ b/util-linux/volume_id/ubifs.c
@@ -13,8 +13,8 @@
//config: default y
//config: depends on VOLUMEID
//config: help
-//config: UBIFS (Unsorted Block Image File System) is a file
-//config: system for use with raw flash memory media.
+//config: UBIFS (Unsorted Block Image File System) is a file
+//config: system for use with raw flash memory media.
#include "volume_id_internal.h"
diff --git a/util-linux/wall.c b/util-linux/wall.c
index 4550f0b68..e214d8c3f 100644
--- a/util-linux/wall.c
+++ b/util-linux/wall.c
@@ -11,7 +11,7 @@
//config: default y
//config: depends on FEATURE_UTMP
//config: help
-//config: Write a message to all users that are logged in.
+//config: Write a message to all users that are logged in.
/* Needs to be run by root or be suid root - needs to write to /dev/TTY: */
//applet:IF_WALL(APPLET(wall, BB_DIR_USR_BIN, BB_SUID_REQUIRE))